Analog Devices Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
ADM3101EARQZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		EIA-232; TIA-232; V.28	7 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		Line Driver or Receivers		3 V	.635 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	1	1.9 mm	3.91 mm	Not Qualified	1.6 Amp		1	DUMMY VAL	NO	e3		260	4.9 mm	10 V	0 ns
LT1785CS8#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR	2000 ns	EIA-422; EIA-485	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE	SOP8,.25				4.75 V	1.27 mm	70 Cel		DIFFERENTIAL	0 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	1.6 Amp		1		YES	e3	30	260	4.9 mm	1.2 V	900 ns
MAX1480AEPI+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS	275 ns	EIA-422; EIA-485	90 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP28,.6		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T28	1	5.08 mm	15.24 mm	Not Qualified		COMPLEMENTARY	1	COMMON I/O; ISOLATED DATA INTERFACE	YES	e3			36.83 mm	1.5 V	225 ns
ADM3491ARZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS	1500 ns	EIA-422; EIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified			1		YES	e3	30	260	8.65 mm	2 V	120 ns
MAX3221EEUE+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified	1.6 Amp		1		NO	e3	30	260	5 mm	10 V	0 ns
ADM3095ETRZ-EP-R7	Analog Devices	LINE TRANSCEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		500 ns	EIA-485; TIA-485		DIFFERENTIAL SCHMITT TRIGGER	3 V				SMALL OUTLINE					1.62 V	1.27 mm	125 Cel			-55 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	3	1.75 mm	3.9 mm				1		YES	e4			9.9 mm		220 ns
MAX3485CSA+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	35 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000002 Amp	3 V	1.27 mm	70 Cel		3-STATE	0 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	2.5 Amp	COMPLEMENTARY	1	COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e3	30	260	4.9 mm	1.5 V	90 ns
ADM211EARSZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		TOTEM-POLE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3		260	10.2 mm	10 V	2000 ns
MAX490ESA+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS	60 ns	EIA-422; EIA-485	.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000002 Amp	4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1		YES	e3	30	260	4.9 mm	1.5 V	150 ns
ADM3483ARZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	1500 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	2.5 Amp		1		YES	e3	30	260	4.9 mm	1.5 V	120 ns
LTM2881CY-3#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	BALL	32	BGA	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		85 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			GRID ARRAY		3 V			1.62 V	1.27 mm	70 Cel	3.3 V		0 Cel	1	TIN SILVER COPPER	BOTTOM	R-PBGA-B32	3	3.62 mm	11.25 mm	Not Qualified			1		YES	e1	30	245	15 mm		140 ns
ADM3101EARQZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		EIA-232; TIA-232; V.28	7 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		Line Driver or Receivers		3 V	.635 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	1	1.9 mm	3.91 mm	Not Qualified	1.6 Amp		1	DUMMY VAL	NO	e3		260	4.9 mm	10 V	0 ns
ADM3483ARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	1500 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	2.5 Amp		1		YES	e3		260	4.9 mm	1.5 V	120 ns
MAX487ECSA+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS	2000 ns	EIA-422; EIA-485	.4 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00025 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e3	30	260	4.9 mm	1.5 V	2000 ns
LTC2863IS8-1#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		65 ns
MAX3486ESA+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		70 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000002 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	2.5 Amp	COMPLEMENTARY	1	COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e3	30	260	4.9 mm	1.5 V	90 ns
LT1785CS8#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR	2000 ns	EIA-422; EIA-485	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE	SOP8,.25				4.75 V	1.27 mm	70 Cel		DIFFERENTIAL	0 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	1.6 Amp		1		YES	e3	30	260	4.9 mm	1.2 V	900 ns
LTC1387CG#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	CMOS	4000 ns	EIA-232; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel			0 Cel	1	MATTE TIN	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified			1		YES	e3	30	260	7.2 mm		6000 ns
LTC2862IS8-2#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	1500 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		65 ns
ADM1485ARZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS	15 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000001 Amp	4.75 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1	THERMAL SHUTDOWN PROTECTION	YES	e3	30	260	4.9 mm	1.5 V	30 ns
ADM2481BRWZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		620 ns	EIA-485-A; TIA-485-A; EIA-422; ISO 8482E	2.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	3.3/5,5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	5 V		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	3	2.65 mm	7.5 mm	Not Qualified	4 Amp		1		YES	e3	30	260	10.3 mm	1.5 V	1050 ns
MAX3079EESD+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	BICMOS	800 ns	EIA-422; EIA-485; TIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		2.97 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e3	30	260	8.65 mm	1.5 V	200 ns
MAX3237EAI+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		EIA-232; TIA-232	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.4		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel			-40 Cel	5	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e3	30	260	10.2 mm	10 V	0 ns
LTC2850IS8#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.9 mm	Not Qualified			1		YES	e3	30	260	4.9 mm		70 ns
MAX487CSA+T	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS	2000 ns	EIA-422; EIA-485	.4 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00025 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e3	30	260	4.9 mm	1.5 V	2000 ns
LTC2862AMPS8-1#PBF	Analog Devices	LINE TRANSCEIVER	MILITARY	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	125 Cel			-55 Cel	1	MATTE TIN	DUAL	R-PDSO-G8		1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		65 ns
LTC2865HDE#TRPBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	12	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	1500 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-N12	1	.8 mm	3 mm				1		YES	e3	30	260	4 mm		65 ns
MAX202CSE+	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		EIA-232-E; TIA-232-E; V.28	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e3	30	260	9.9 mm	10 V	10000 ns
MAX3430ESA/GG8	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	BICMOS	1500 ns	EIA-485	10 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE	SOP8,.25			.000001 Amp	2.97 V	1.27 mm	85 Cel		DIFFERENTIAL	-40 Cel	1		DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm		1 Amp	COMPLEMENTARY	1		YES				4.9 mm	1.5 V	120 ns
MAX3281EAUT+T	Analog Devices	LINE RECEIVER	AUTOMOTIVE	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		EIA-422; EIA-485	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37				3 V	.95 mm	125 Cel			-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6	1	1.45 mm	1.625 mm	Not Qualified	4 Amp		1		NO	e3	30	260	2.9 mm		15 ns
MAX3491ESD+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		35 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.000002 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	2.5 Amp	COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e3	30	260	8.65 mm	1.5 V	90 ns
ADM2481BRWZ-RL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		620 ns	EIA-485-A; TIA-485-A; EIA-422; ISO 8482E	2.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	3.3/5,5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	5 V		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	3	2.65 mm	7.5 mm	Not Qualified	4 Amp		1		YES	e3	30	260	10.3 mm	1.5 V	1050 ns
ADM485ARMZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS	15 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.75 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	4 Amp		1	1 RECEIVER ACTIVE UNDER SHUTDOWN; COMMON I/O; TRISTATABLE RECEIVERS	YES	e3	30	260	3 mm	1.5 V	30 ns
MAX14878AWE+	Analog Devices																																Matte Tin (Sn) - annealed			1									e3	30	260
ADM1385ARSZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS	1200 ns	EIA-232-E; TIA-232-E; V.28	12 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified	1.6 Amp		2		NO	e3		260	7.2 mm	10 V	1000 ns
MAX3079EESD+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	BICMOS	800 ns	EIA-422; EIA-485; TIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		2.97 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e3	30	260	8.65 mm	1.5 V	200 ns
ADM2482EBRWZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		100 ns	EIA-485-A; TIA-485-A; ISO 8482E	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	3.6 V	3.3/5		SMALL OUTLINE	SOP16,.4	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified			1	INTEGRATED OSCILLATOR DRIVER FOR EXTERNAL TRANSFORMER	YES	e3	30	260	10.3 mm	1.5 V	110 ns
MAX14878AWA+	Analog Devices																																Matte Tin (Sn) - annealed			3									e3	30	260
LTC2852IMS#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G10	1	1.1 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
LTC2873IUFD#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	3000 ns	EIA-232		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.7 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	R-PQCC-N24	1	.8 mm	4 mm				1	CAN ALSO BE CONFIGURED AS RS-485/422 TRANSCEIVER	YES	e3	30	260	5 mm		200 ns
AD8138ARMZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					1.4 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified					YES	e3	30	260	3 mm		0 ns
ADM2483BRW	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		620 ns	EIA-485-A; TIA-485-A; ISO 8482E		DIFFERENTIAL SCHMITT TRIGGER	3 V	5.25 V	3/5,5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers	.00001 Amp	2.7 V	1.27 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	4 Amp		1		YES	e0		240	10.3 mm	1.5 V	1050 ns
LTC2862HS8-2#PBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	1500 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		65 ns
LTC2865IMSE#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	12	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	1500 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G12	1	1.1 mm	3 mm				1		YES	e3	30	260	4.039 mm		65 ns
LTC485CS8	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS	50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	1	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY	1	COMMON I/O; TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e0	20	235	4.9 mm		200 ns
MAX14841EATA+T	Analog Devices		AUTOMOTIVE	NO LEAD	8	SON	RECTANGULAR	PLASTIC/EPOXY	YES			BICMOS			4 mA		3.3 V		3.3		SMALL OUTLINE	SOLCC8,.12,25		Line Driver or Receivers			.635 mm	125 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-N8	1			Not Qualified	1 Amp				YES	e3	30	260		1.5 V	0 ns
MAX3237EAI+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		EIA-232; EIA-562	2 mA	SCHMITT TRIGGER	5 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.4		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel			-40 Cel	5	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e3	30	260	10.2 mm	10 V	0 ns
ADM2490EBRWZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		60 ns	EIA-485-A; TIA-485-A; ISO 8482	60 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	3/5,5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers		2.7 V	1.27 mm	105 Cel	5 V		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified			1		YES	e3	30	260	10.3 mm	1.5 V	60 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.