Analog Devices Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
ADM485ARMZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		15 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.000001 Amp	4.75 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	4 Amp		1	1 RECEIVER ACTIVE UNDER SHUTDOWN; COMMON I/O; TRISTATABLE RECEIVERS	YES	e3		260	3 mm	1.5 V	30 ns
LTC2862HS8-1#PBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		65 ns
ADA4932-1YCPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	1	BIPOLAR			GENERAL PURPOSE	5 mA	DIFFERENTIAL	5 V			-5 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20				3 V	.5 mm	105 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	.8 mm	3 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	3 mm	3.2 V
LTC2865HMSE#TRPBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	12	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		1500 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G12	1	1.1 mm	3 mm				1		YES	e3	30	260	4.039 mm		65 ns
LTC2862AIDD-1#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-N8		.8 mm	3 mm				1		YES	e3	30	260	3 mm		65 ns
LTC2862AIS8-2#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		1500 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8		1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		700 ns
LTC2862IS8-2#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		1500 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		65 ns
MAX3250EAI+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS			EIA-232; TIA-232; V.24; V.28	35 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		2		NO	e3	30	260	10.2 mm	10 V	0 ns
ADM2491EBRWZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			60 ns	EIA-485-A; TIA-485-A; ISO 8482	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	3.3/5,5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	5 V		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.5 Amp		1		YES	e3	30	260	10.3 mm	1.5 V	60 ns
MAX3535EEWI+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		1560 ns	EIA-422; EIA-485	70 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3,5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	4 Amp		1		YES	e3	30	260	17.9 mm	1.5 V	855 ns
LTC2862IS8-1#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		65 ns
LTC2872IUHF#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	38	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		2000 ns	EIA-232; EIA-422		SCHMITT TRIGGER	3.3 V	5.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.7 V	.5 mm	85 Cel	3.3 V		-40 Cel	4	MATTE TIN	QUAD	R-PQCC-N38	1	.8 mm	5 mm				4	ALSO OPERATES AS TWO RS485 DIFFERENTIAL TRANSCEIVER PAIR	NO	e3	30	260	7 mm		200 ns
MAX14878AWA+T	Analog Devices																																	Matte Tin (Sn) - annealed			3									e3	30	260
LTC2870CUFD#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	28	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		70 ns	EIA-232; EIA-422; EIA-485	.005 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.16X.2,20	3 V			1.7 V	.5 mm	70 Cel	3.3 V		0 Cel	2	Matte Tin (Sn) - annealed	QUAD	R-PQCC-N28	1	.8 mm	4 mm	Not Qualified	3 Amp		2		YES	e3	30	260	5 mm	1.5 V	200 ns
MAX3232ECUE+T	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	70 Cel			0 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified	1.6 Amp		2		NO	e3	30	260	5 mm	10 V	0 ns
MAX3232EEWE+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		2		NO	e3	30	260	10.3 mm	10 V	0 ns
ADM3491ARZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS		1500 ns	EIA-422; EIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified			1		YES	e3	30	260	8.65 mm	2 V	120 ns
MAX3250EAI+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS			EIA-232; TIA-232; V.24; V.28	35 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	1.6 Amp		2		NO	e3	30	260	10.2 mm	10 V	0 ns
AD2428WCCSZ01-RL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1.98 V	2	DMOS	AEC-Q100		I2C	13 mA	DIFFERENTIAL	1.9 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20			.00001 Amp	1.7 V	.5 mm	105 Cel		OPEN-DRAIN	-40 Cel	2		QUAD	S-XQCC-N32		.8 mm	5 mm		1 Amp	COMPLEMENTARY	2		YES				5 mm	.21 V
ADM3491ARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS		1500 ns	EIA-422; EIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified			1		YES	e3	30	260	8.65 mm	2 V	120 ns
ADV7611BSWZ	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	64	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1	CMOS			GENERAL PURPOSE		STANDARD	1.8 V				FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH					1.71 V	.5 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G64	3	1.6 mm	10 mm	Not Qualified			1		NO	e3	30	260	10 mm		0 ns
LTC2870CFE#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		70 ns	EIA-232; EIA-422; EIA-485	.005 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3 V			1.7 V	.65 mm	70 Cel	3.3 V		0 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	3 Amp		2		YES	e3	30	260	9.7 mm	1.5 V	200 ns
MAX14946EWE+	Analog Devices	LINE TRANSCEIVER																																Matte Tin (Sn) - annealed			1									e3	30	260
LTC2855IDE#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	12	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			50 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-N12	1	.8 mm	3 mm	Not Qualified			1		YES	e3	30	260	4 mm		70 ns
MAX256ASA+	Analog Devices	LINE DRIVER	AUTOMOTIVE	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS					STANDARD	5 V		3.3/5		SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Other Interface ICs		3 V	1.27 mm	125 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.68 mm	3.9 mm	Not Qualified					NO	e3	30	260	4.89 mm		0 ns
LTC2854IDD#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	10	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		50 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-N10	1	.8 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
LTC2879XMS8E#PBF	Analog Devices	LINE TRANSCEIVER		GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					3 V	.65 mm					1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm				1		YES	e3	30	260	3 mm		75 ns
MAX3078EESA+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	BICMOS		50 ns	EIA-422; EIA-485; TIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.97 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e3	30	260	4.9 mm	1.5 V	75 ns
LTC2854HDD#TRPBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	10	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			50 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-N10	1	.8 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
MAX3485AEASA+	Analog Devices	LINE TRANSCEIVER		GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS		30 ns	EIA-422; TIA-422; EIA-485; TIA-485	4 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE	SOP8,.25			.000002 Amp	3 V	1.27 mm	125 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm		2 Amp		1		YES	e3	30	260	4.9 mm	1.5 V	35 ns
LTC1387IG#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		4000 ns	EIA-232; EIA-422; EIA-485; EIA-562		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH					4.75 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified			1		YES	e3	30	260	7.2 mm		6000 ns
LTC2862AHDD-1#PBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-N8		.8 mm	3 mm				1		YES	e3	30	260	3 mm		65 ns
LTC2862AHS8-1#PBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8		1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		65 ns
MAX14840EASA+T	Analog Devices		AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			BICMOS				4 mA		3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers			1.27 mm	125 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1			Not Qualified	1 Amp				YES	e3	30	260		1.5 V	0 ns
ADM485ARMZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		15 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.75 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	4 Amp		1	1 RECEIVER ACTIVE UNDER SHUTDOWN; COMMON I/O; TRISTATABLE RECEIVERS	YES	e3	30	260	3 mm	1.5 V	30 ns
LTC2850IMS8#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
ADM211EARUZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		TOTEM-POLE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3		260	9.7 mm	10 V	2000 ns
LTC2850IS8#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm	Not Qualified			1		YES	e3	30	260	4.9025 mm		70 ns
MAX14853GWE+T	Analog Devices	LINE TRANSCEIVER																																Matte Tin (Sn) - annealed			1									e3	30	260
MAX3232ECWE+T	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		3 V	1.27 mm	70 Cel			0 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		2		NO	e3	30	260	10.3 mm	10 V	0 ns
LTC1480IS8#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		80 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm	Not Qualified			1		YES	e3	30	260	4.9025 mm		200 ns
LTC2801IDE#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	12	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		2000 ns	EIA-232-F; TIA-232-F		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					1.8 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-N12	1	.8 mm	3 mm	Not Qualified			1		NO	e3	30	260	4 mm		400 ns
MAX14776EASA+T	Analog Devices	LINE TRANSCEIVER																																Matte Tin (Sn) - annealed			1									e3	30	260
MAX488EESA+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		2000 ns	EIA-422; EIA-485	.25 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000001 Amp	4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1		YES	e3	30	260	4.9 mm	1.5 V	2000 ns
ADM202EARNZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		1500 ns	EIA-232-E; V.28	18 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e3	30	260	9.9 mm	10 V	1000 ns
LTM2881HY-5	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	BALL	32	BGA	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			1550 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V			GRID ARRAY		4.5 V			1.62 V	1.27 mm	105 Cel	5 V		-40 Cel	1	TIN LEAD	BOTTOM	R-PBGA-B32	3	3.62 mm	11.25 mm				1		YES	e0		245	15 mm		140 ns
ADM483EARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		2000 ns	EIA-422; EIA-485	.36 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e3	40	260	4.9 mm	3.5 V	2000 ns
LTC2862CS8-1#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	70 Cel			0 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		65 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.