INDUSTRIAL Other Function Interface ICs 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	No. of Bits	Interface Standard	Maximum Supply Current	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
SN74AUP1T98DCKR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			1		.0009 mA	3.3 V		1.2/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			Other Interface ICs	2.3 V	.65 mm	85 Cel		PUSH-PULL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6	1	1.1 mm	1.25 mm	Not Qualified		e4	NOT SPECIFIED	260	2 mm
PCA9518DWRG4	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1						3.3 V				SMALL OUTLINE				3 V	1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified		e4	30	260	12.8 mm
SN74AUP1T58DBVTG4	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS				2.5 V		1.2/3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		Other Interface ICs	2.3 V	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	1.45 mm	1.6 mm	Not Qualified		e4	30	260	2.9 mm
SN74AUP1T98DBVT	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			1		.0009 mA	3.3 V		1.2/3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			Other Interface ICs	2.3 V	.95 mm	85 Cel		PUSH-PULL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6	1	1.45 mm	1.6 mm	Not Qualified		e4	NOT SPECIFIED	260	2.9 mm
SN74AUP1T98DBVRG4	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS				3.3 V		1.2/3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		Other Interface ICs	2.3 V	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	1.45 mm	1.6 mm	Not Qualified		e4	30	260	2.9 mm
TPS65192RHDR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	38 V	1						30 V		-7,30	-7 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20		Other Interface ICs	12 V	.5 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N28	2	1 mm	5 mm	Not Qualified		e4	NOT SPECIFIED	260	5 mm
SN74AUP1T98YFPR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	BALL	6	VFBGA	RECTANGULAR	UNSPECIFIED	YES	3.6 V	1			1		.0009 mA	2.5 V		2.5/3.3		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			Other Interface ICs	2.3 V	.4 mm	85 Cel		PUSH-PULL	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	R-XBGA-B6	1	.5 mm	.77 mm	Not Qualified		e1	NOT SPECIFIED	260	1.17 mm
SN74AUP1T98YZPR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	BALL	6	VFBGA	RECTANGULAR	UNSPECIFIED	YES	3.6 V	1			1		.0009 mA	3.3 V		1.2/3.3		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			Other Interface ICs	2.3 V	.5 mm	85 Cel		PUSH-PULL	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	R-XBGA-B6	1	.5 mm	.9 mm	Not Qualified		e1	NOT SPECIFIED	260	1.4 mm
SN65CML100DR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		EIA-644; TIA-644		3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	3 V	1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		e4	30	260	4.9 mm
ISO7420FCCD	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5 V	2	2					3.3 V				SMALL OUTLINE				3.3 V	1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	2	1.75 mm	3.9 mm	Not Qualified	IT ALSO OPERATES AT 5 V	e4	30	260	4.9 mm
SN65CML100D	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		EIA-644; TIA-644		3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	3 V	1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		e4	30	260	4.9 mm
SN74AUP1T58DCKRE4	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS				2.5 V		1.2/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08		Other Interface ICs	2.3 V	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	1.1 mm	1.25 mm	Not Qualified		e4	30	260	2 mm
TPD4S214AYFFR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	BALL	12	VFBGA	RECTANGULAR	UNSPECIFIED	YES		1										GRID ARRAY, VERY THIN PROFILE, FINE PITCH					.4 mm	85 Cel			-40 Cel		BOTTOM	R-XBGA-B12		.625 mm	1.39 mm						1.69 mm
PCA9515APWRG4	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		BICMOS				3 V		2.5/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25		Other Interface ICs	2.3 V	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.2 mm	3 mm	Not Qualified		e4	30	260	4.4 mm
PCA9518DWG4	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1						3.3 V				SMALL OUTLINE				3 V	1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified		e4	30	260	12.8 mm
TUSB1210BRHB	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	4.8 V	1						3.6 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20			2.7 V	.5 mm	85 Cel			-40 Cel		QUAD	S-PQCC-N32		1 mm	5 mm						5 mm
TPS65197BRUYT	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	45 V	1						30 V			-8 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				16.5 V	.4 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N28	1	.8 mm	4 mm			e4	NOT SPECIFIED	260	4 mm
SN74AUP1T58DCKTG4	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS				2.5 V		1.2/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08		Other Interface ICs	2.3 V	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	1.1 mm	1.25 mm	Not Qualified		e4	30	260	2 mm
PCA9515APWR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		BICMOS				3 V	3.6 V	2.5/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	2.3 V	Line Driver or Receivers	2.3 V	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.2 mm	3 mm	Not Qualified		e4	30	260	4.4 mm
ISO7521CDW	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5 V	2	2					3.3 V				SMALL OUTLINE				3.3 V	1.27 mm	105 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	3	2.65 mm	7.5 mm	Not Qualified	IT ALSO REQUIRES 5 V FOR NORMAL OPERATION	e4	30	260	10.3 mm
TCA9406DQMR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	NO LEAD	8	QCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1						1.8 V				CHIP CARRIER				1.65 V		85 Cel			-40 Cel		QUAD	S-XQCC-N8					IT ALSO REQUIRES 2.3 TO 5.5
SN74LV4320AGKFR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	BALL	114	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS			.01 mA			1.8/5,3.3/5		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA114,6X19,32		Other Interface ICs	1.65 V	.8 mm	85 Cel			-40 Cel	TIN LEAD	BOTTOM	R-PBGA-B114	2	1.4 mm	5.5 mm	Not Qualified		e0	20	235	16 mm
SN65CML100DGK	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		EIA-644; TIA-644		3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	3 V	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified		e4	30	260	3 mm
TUSB216IRWBT	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	NO LEAD	12	VQCCN	SQUARE	PLASTIC/EPOXY	YES	6.5 V	1	1				36 mA	5 V				CHIP CARRIER, VERY THIN PROFILE	LCC12,.062SQ,16			2.3 V	.4 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N12	2	.4 mm	1.6 mm			e4	30	260	1.6 mm
SN74AUP1T98DCKTE4	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS				3.3 V		1.2/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08		Other Interface ICs	2.3 V	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	1.1 mm	1.25 mm	Not Qualified		e4	30	260	2 mm
TXS0206AYFPR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	BALL	20	VFBGA	RECTANGULAR	UNSPECIFIED	YES	3.6 V	1			4		.018 mA	1.2 V		1.2/3.3		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA20,4X5,16		Other Interface ICs	1.1 V	.4 mm	85 Cel		3-STATE	-40 Cel	TIN SILVER COPPER	BOTTOM	R-XBGA-B20	1	.5 mm	1.557 mm	Not Qualified	IT ALSO OPERATES AT 1.8, 3.3V	e1	30	260	1.958 mm
PCA9548ADGV	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	8					2.5 V				SMALL OUTLINE				2.3 V	.4 mm	85 Cel			-40 Cel		DUAL	R-PDSO-G24		1.2 mm	4.4 mm				NOT SPECIFIED	NOT SPECIFIED	5 mm
PCA9517P	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		BICMOS								IN-LINE				.9 V	2.54 mm	85 Cel			-40 Cel		DUAL	R-PDIP-T8		5.08 mm	7.62 mm		ALSO OPERATES WITH 2.7 V TO 5.5 V				9.59 mm
SN74ACT2440FNR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	J BEND	68	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		CMOS				5 V				CHIP CARRIER				4.5 V	1.27 mm	85 Cel			-40 Cel		QUAD	S-PQCC-J68		5.08 mm	24.2316 mm	Not Qualified			NOT SPECIFIED	NOT SPECIFIED	24.2316 mm
SN65LVDS22ID	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1						3.3 V				SMALL OUTLINE					1.27 mm	85 Cel			-40 Cel		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified					9.9 mm
TCA9543APW	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1						1.8 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25			1.65 V	.65 mm	85 Cel			-40 Cel		DUAL	R-PDSO-G14		1.2 mm	4.4 mm						5 mm
SN65LVDM22ID	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1						3.3 V				SMALL OUTLINE					1.27 mm	85 Cel			-40 Cel		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified					9.9 mm
PCA9515ADCTT	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		BICMOS				3 V		2.5/3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16		Line Driver or Receivers	2.3 V	.65 mm	85 Cel			-40 Cel		DUAL	R-PDSO-G8		1.3 mm	2.8 mm	Not Qualified					2.95 mm
ISO7420FMDR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2						3.3 V				SMALL OUTLINE				3 V	1.27 mm	105 Cel			-40 Cel		DUAL	R-PDSO-G8		1.75 mm	3.9 mm		ALSO OPERATES AT 5V NOM				4.9 mm
SN74AUP1T98DBVR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			1		.0009 mA	3.3 V		1.2/3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			Other Interface ICs	2.3 V	.95 mm	85 Cel		PUSH-PULL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6	1	1.45 mm	1.6 mm	Not Qualified		e4	NOT SPECIFIED	260	2.9 mm
TXS0101DRLT	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	FLAT	6	VSOF	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1						1.8 V		1.8/3.3,2.5/5		SMALL OUTLINE, VERY THIN PROFILE	TSSOP6,.06,20		Other Interface ICs	1.65 V	.5 mm	85 Cel			-40 Cel		DUAL	R-PDSO-F6		.6 mm	1.2 mm	Not Qualified	ALSO OPERATES WITH 2.3 TO 5.5 VOLT		NOT SPECIFIED	NOT SPECIFIED	1.6 mm
SN74ACT2440FN	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	J BEND	68	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		CMOS				5 V				CHIP CARRIER				4.5 V	1.27 mm	85 Cel			-40 Cel		QUAD	S-PQCC-J68		5.08 mm	24.2316 mm	Not Qualified			NOT SPECIFIED	NOT SPECIFIED	24.2316 mm
TUSB1210RHBR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	4.8 V	1						3.6 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20			2.7 V	.5 mm	85 Cel			-40 Cel		QUAD	S-PQCC-N32		1 mm	5 mm						5 mm
PCA9515ADCTR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		BICMOS				3 V		2.5/3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16		Line Driver or Receivers	2.3 V	.65 mm	85 Cel			-40 Cel		DUAL	R-PDSO-G8		1.3 mm	2.8 mm	Not Qualified					2.95 mm
SN74AUP1T98DBVRE4	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS				3.3 V		1.2/3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		Other Interface ICs	2.3 V	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	1.45 mm	1.6 mm	Not Qualified		e4	30	260	2.9 mm
SN74AUP1T57DBVTE4	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS				2.5 V		1.2/3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		Other Interface ICs	2.3 V	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	1.45 mm	1.6 mm	Not Qualified		e4	30	260	2.9 mm
TXS02326MRGER	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.3 V	1							5.5 V	1.8/2.95		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.3 V	Other Interface ICs	1.7 V	.5 mm	85 Cel	3.25 V		-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24	2	1 mm	4 mm	Not Qualified		e4	30	260	4 mm
SN74AUP1T98DCKRE4	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS				3.3 V		1.2/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08		Other Interface ICs	2.3 V	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	1.1 mm	1.25 mm	Not Qualified		e4	30	260	2 mm
TXS0101DRLR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	FLAT	6	VSOF	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			1		.0144 mA	1.8 V		1.8/3.3,2.5/5		SMALL OUTLINE, VERY THIN PROFILE	TSSOP6,.06,20		Other Interface ICs	1.65 V	.5 mm	85 Cel		3-STATE	-40 Cel	NICKEL PALLADIUM GOLD SILVER	DUAL	R-PDSO-F6	1	.6 mm	1.2 mm	Not Qualified	ALSO OPERATES WITH 2.3 TO 5.5 VOLT	e4	30	260	1.6 mm
TXB0102DCTR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1						1.5 V	5.5 V	1.2/3.6,1.8/5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16	1.65 V	Other Interface ICs	1.2 V	.65 mm	85 Cel	1.8 V		-40 Cel		DUAL	R-PDSO-G8		1.3 mm	2.8 mm	Not Qualified					3 mm
SN65LVDM22IDR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1						3.3 V				SMALL OUTLINE					1.27 mm	85 Cel			-40 Cel		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified					9.9 mm
PCA9517PWR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS								SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				.9 V	.65 mm	85 Cel			-40 Cel		DUAL	R-PDSO-G8		1.2 mm	3 mm		ALSO OPERATES WITH 2.7 V TO 5.5 V				4.4 mm
SN74AUP1T97DBVR	Texas Instruments	INTERFACE CIRCUIT	INDUSTRIAL	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			1		.0009 mA	2.5 V		1.2/3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			Other Interface ICs	2.3 V	.95 mm	85 Cel		PUSH-PULL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	1.45 mm	1.6 mm	Not Qualified		e4	30	260	2.9 mm

Other Function Interface ICs

Other function interface ICs are electronic components that provide specific functions for interfacing different devices in electronic systems. They are designed to facilitate the exchange of data and signals between various components of the system.

Other function interface ICs can be classified into several types based on their specific functions and applications. Some of the most common types of interface ICs include:

1. Voltage level translators - These ICs are used to convert voltage levels between different devices in electronic systems, ensuring that signals are compatible and can be correctly interpreted.

2. Real-time clock (RTC) ICs - These ICs are used to keep track of time and date in electronic systems, and they typically include a battery backup to ensure that the clock remains accurate even if the main power supply is lost.

3. Touchscreen controllers - These ICs are used to interface with touchscreens and enable touch-based input in electronic systems.

Other function interface ICs can also include USB controllers, Ethernet controllers, and Bluetooth controllers, among other components. They are typically characterized by their data rate, power consumption, and specific functions.