INDUSTRIAL Clock Drivers & Buffers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
98ULPA877AHILFT	Renesas Electronics	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	52	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				1.8	1.8		0	GRID ARRAY, LOW PROFILE, FINE PITCH	BGA52,6X10,25		9 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.04 ns	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	10	BOTTOM	410 MHz	R-PBGA-B52	3	1.9 V	1.31 mm	4.5 mm	Not Qualified	1.7 V			e1	30	260	7 mm	98ULPA
9DB803DGILF	Renesas Electronics	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20			Clock Drivers	.5 mm	85 Cel	3-STATE	.05 ns	-40 Cel	MATTE TIN	8	DUAL		R-PDSO-G48	1	3.465 V	1.2 mm	6.1 mm	Not Qualified	3.135 V			e3	30	260	12.5 mm	9DB
9DB833AFILFT	Renesas Electronics	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4			Clock Drivers	.635 mm	85 Cel	3-STATE	.06 ns	-40 Cel	MATTE TIN	8	DUAL		R-PDSO-G48	1	3.465 V	2.8 mm	7.5 mm	Not Qualified	3.135 V			e3	30	260	15.875 mm	9DB
9DBV0941AKILF	Renesas Electronics	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				1.8			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.4 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.06 ns	-40 Cel	TIN	18	QUAD		S-XQCC-N48	3	1.9 V	1 mm	6 mm		1.7 V			e3		260	6 mm	9DBV
9DBV0941AKILFT	Renesas Electronics	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				1.8			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.4 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.06 ns	-40 Cel	TIN	18	QUAD		S-XQCC-N48	3	1.9 V	1 mm	6 mm		1.7 V			e3		260	6 mm	9DBV
AD9510BCPZ-REEL7	Analog Devices	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1		BICMOS		3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.76 ns		Clock Drivers	.5 mm	85 Cel		1.43 ns	-40 Cel	MATTE TIN	8	QUAD	1200 MHz	S-XQCC-N64	3	3.465 V	1 mm	9 mm	Not Qualified	3.135 V			e3	30	260	9 mm	9510
AD9516-0BCPZ-REEL7	Analog Devices	CLOCK DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1				3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	2.6 ns		Clock Drivers	.5 mm	85 Cel	3-STATE	.675 ns	-40 Cel	MATTE TIN	10	QUAD	2950 MHz	S-XQCC-N64	3	3.465 V	1 mm	9 mm	Not Qualified	3.135 V			e3	30	260	9 mm	9516
AD9516-1BCPZ	Analog Devices	CLOCK DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1				3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	2.6 ns	1 Amp	Clock Drivers	.5 mm	85 Cel	OPEN-DRAIN	.675 ns	-40 Cel	MATTE TIN	10	QUAD	800 MHz	S-XQCC-N64	3	3.465 V	1 mm	9 mm	Not Qualified	3.135 V			e3	30	260	9 mm	9516
CDCLVD2106RHAT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2			TR	2.5	2.5		0	CHIP CARRIER	LCC40,.24SQ,20	2.5 ns		Clock Drivers	.5 mm	85 Cel		.075 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	QUAD	800 MHz	S-PQCC-N40	3	2.625 V	1 mm	6 mm	Not Qualified	2.375 V			e4	30	260	6 mm	CDC
CDCS501PWR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25		12 Amp	Clock Drivers	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL	108 MHz	R-PDSO-G8	1	3.6 V	1.2 mm	3 mm	Not Qualified	3 V			e4	30	260	4.4 mm	501
CDCUN1208LPRHBR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			TR	1.8	1.8/3.3	8 pF	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		12 Amp	Clock Drivers	.5 mm	85 Cel	3-STATE	.13 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	16	QUAD	400 MHz	S-PQCC-N32	2	1.9 V	1 mm	5 mm	Not Qualified	1.7 V		ALSO OPERATES IN 2.5V AND 3.3V SUPPLY	e4	NOT SPECIFIED	260	5 mm	CDC
CDCV304TPWREP	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TR	2.5	2.5/3.3	10 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	4.5 ns	24 Amp	Clock Driver	.65 mm	105 Cel		.15 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL	200 MHz	R-PDSO-G8	1	3.6 V	1.2 mm	3 mm	Not Qualified	2.3 V		V62/12618-01XE WILLL BE SENDING IN DETAIL	e4	30	260	4.4 mm	CDCV
CDCVF2310PW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			TUBE	2.5	2.5/3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	3.5 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.17 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL	200 MHz	R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	2.3 V			e4	30	260	7.8 mm	CDC
CY2302SXI-1	Infineon Technologies	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3/5		0	SMALL OUTLINE	SOP8,.25	.35 ns	12 Amp	Clock Drivers	1.27 mm	85 Cel		.25 ns	-40 Cel	MATTE TIN	2	DUAL	133 MHz	R-PDSO-G8	3	3.465 V	1.727 mm	3.8985 mm	Not Qualified	3.135 V		IT ALSO OPERATES WITH 5V SUPPLY	e3	20	260	4.889 mm	23S
CY2302SXI-1T	Infineon Technologies	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3/5		0	SMALL OUTLINE	SOP8,.25	.35 ns	12 Amp	Clock Drivers	1.27 mm	85 Cel		.25 ns	-40 Cel	MATTE TIN	2	DUAL	133 MHz	R-PDSO-G8	3	3.465 V	1.727 mm	3.8985 mm	Not Qualified	3.135 V		IT ALSO OPERATES WITH 5V SUPPLY	e3	20	260	4.889 mm	23S
CY7B9950AIT	Cypress Semiconductor	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	32	TQFP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1				2.5	2.5/3.3		0	FLATPACK, THIN PROFILE	TQFP32,.35SQ,32		24 Amp	Clock Drivers	.8 mm	85 Cel		.65 ns	-40 Cel	TIN LEAD	8	QUAD	200 MHz	S-PQFP-G32		2.625 V	1.2 mm	7 mm	Not Qualified	2.375 V		ALSO OPERATES WITH 3.3V SUPPLY	e0			7 mm	7B
ICS574MIT	Integrated Device Technology	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3	3.3		0	SMALL OUTLINE	SOP8,.25		18 Amp	Clock Drivers	1.27 mm	85 Cel		.15 ns	-40 Cel	TIN LEAD	4	DUAL	160 MHz	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	3 V			e0	20	240	4.9 mm	574
ICS83023AMILF	Integrated Device Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	2				3.3	3.3		0	SMALL OUTLINE	SOP8,.25	2.4 ns		Clock Drivers	1.27 mm	85 Cel		.06 ns	-40 Cel	Matte Tin (Sn) - annealed	1	DUAL		R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e3	30	260	4.9 mm	83023
ICS83023AMILFT	Integrated Device Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	2				3.3	3.3		0	SMALL OUTLINE	SOP8,.25	2.4 ns		Clock Drivers	1.27 mm	85 Cel		.06 ns	-40 Cel	Matte Tin (Sn) - annealed	1	DUAL		R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e3	30	260	4.9 mm	83023
ICS83026AMILFT	Integrated Device Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				3.3	3.3		0	SMALL OUTLINE	SOP8,.25	2.5 ns		Clock Drivers	1.27 mm	85 Cel		.02 ns	-40 Cel	Matte Tin (Sn) - annealed	2	DUAL		R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e3	30	260	4.9 mm	83026
ICS83948AYI-147LF	Integrated Device Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				2.5	2.5/3.3		0	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	4.4 ns	15 Amp	Clock Drivers	.8 mm	85 Cel	3-STATE	.16 ns	-40 Cel	Matte Tin (Sn) - annealed	12	QUAD		S-PQFP-G32	3	2.625 V	1.6 mm	7 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3V SUPPLY	e3	30	260	7 mm	83948
ICS854S006AGILF	Renesas Electronics		INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES							2.5/3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25			Clock Drivers	.635 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL		R-PDSO-G24	1				Not Qualified				e3	30	260
ICS854S202AYILFT	Integrated Device Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				3.3			0	FLATPACK, LOW PROFILE, FINE PITCH					.5 mm	85 Cel			-40 Cel	MATTE TIN	12	QUAD		S-PQFP-G48	3	3.465 V	1.6 mm	7 mm	Not Qualified	3.135 V			e3			7 mm	854S
ICS8705BYILFT	Integrated Device Technology	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				2.5			0	FLATPACK, LOW PROFILE		7.3 ns			.8 mm	85 Cel		.065 ns	-40 Cel	Matte Tin (Sn) - annealed	8	QUAD	15.625 MHz	S-PQFP-G32	3	2.625 V	1.6 mm	7 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3V SUPPLY	e3	30	260	7 mm
IDT49FCT805SOGI	Integrated Device Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SCHMITT TRIGGER	2		CMOS		5	5		0	SMALL OUTLINE	SOP20,.4	5.6 ns	64 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.7 ns	-40 Cel	Matte Tin (Sn) - annealed	5	DUAL		R-PDSO-G20	1	5.25 V	2.6416 mm	7.5184 mm	Not Qualified	4.75 V			e3	30	260	12.8016 mm	FCT
IDT5V993A-5QGI	Integrated Device Technology	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP28,.25		12 Amp	Clock Drivers	.635 mm	85 Cel		.7 ns	-40 Cel	Matte Tin (Sn) - annealed	8	DUAL	85 MHz	R-PDSO-G28	1	3.6 V	1.7272 mm	3.9116 mm	Not Qualified	3 V			e3	30	260	9.906 mm	5V
IDT5V993A-5QGI8	Integrated Device Technology	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			0	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel		.7 ns	-40 Cel	MATTE TIN	8	DUAL	85 MHz	R-PDSO-G28		3.6 V	1.75 mm	3.9116 mm	Not Qualified	3 V			e3			9.9 mm
IDT5V9950PFGI8	Integrated Device Technology	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1				3.3			0	FLATPACK, LOW PROFILE					.8 mm	85 Cel		.5 ns	-40 Cel	MATTE TIN	8	QUAD	200 MHz	S-PQFP-G32	3	3.6 V	1.6 mm	7 mm	Not Qualified	3 V			e3			7 mm
IDT74FCT3807AQGI	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.25	4.3 ns	24 Amp	Clock Drivers	.635 mm	85 Cel	3-STATE	.45 ns	-40 Cel	Matte Tin (Sn) - annealed	10	DUAL		R-PDSO-G20	1	3.6 V	1.7272 mm	3.937 mm	Not Qualified	3 V			e3	30	260	8.6868 mm	FCT
IDT74FCT3807SOGI	Renesas Electronics	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3	3.3		0	SMALL OUTLINE	SOP20,.4	4.8 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.6 ns	-40 Cel	Matte Tin (Sn) - annealed	10	DUAL		R-PDSO-G20	1	3.6 V	2.6416 mm	7.5184 mm	Not Qualified	3 V			e3	30	260	12.8016 mm	FCT
IDT74FCT807CTPYGI	Integrated Device Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SCHMITT TRIGGER	1		CMOS		5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	3.7 ns	48 Amp	Clock Drivers	.65 mm	85 Cel		.45 ns	-40 Cel	Matte Tin (Sn) - annealed	10	DUAL	100 MHz	R-PDSO-G20	1	5.25 V	1.99 mm	5.3 mm	Not Qualified	4.75 V			e3	30	260	7.2 mm	FCT
IDT74FCT807CTPYGI8	Integrated Device Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SCHMITT TRIGGER	1		CMOS		5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	3.7 ns	48 Amp	Clock Drivers	.65 mm	85 Cel		.45 ns	-40 Cel	Matte Tin (Sn) - annealed	10	DUAL	100 MHz	R-PDSO-G20	1	5.25 V	2 mm	5.3 mm	Not Qualified	4.75 V			e3	30	260	7.2 mm	FCT
IDT74FCT807CTSOGI	Integrated Device Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SCHMITT TRIGGER	1		CMOS		5	5		0	SMALL OUTLINE	SOP20,.4	3.7 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.45 ns	-40 Cel	Matte Tin (Sn) - annealed	10	DUAL		R-PDSO-G20	1	5.25 V	2.6416 mm	7.5184 mm	Not Qualified	4.75 V			e3	30	260	12.8016 mm	FCT
IDT74FCT807CTSOGI8	Integrated Device Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SCHMITT TRIGGER	1		CMOS		5	5		0	SMALL OUTLINE	SOP20,.4	3.7 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.45 ns	-40 Cel	Matte Tin (Sn) - annealed	10	DUAL		R-PDSO-G20	1	5.25 V	2.6416 mm	7.5184 mm	Not Qualified	4.75 V			e3	30	260	12.8016 mm	FCT
LMH2180SD/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2		CMOS	TR	2.7	2.5/5	10 pF	0	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20			Clock Drivers	.5 mm	85 Cel			-40 Cel	MATTE TIN	2	DUAL	78 MHz	S-PDSO-N8	1	5 V	.8 mm	3 mm	Not Qualified	2.4 V	2.3 mA		e3	30	260	3 mm	2180
LMH2180SDE/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2		CMOS	TR	2.7	2.5/5	10 pF	0	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20			Clock Drivers	.5 mm	85 Cel			-40 Cel	MATTE TIN	2	DUAL	78 MHz	S-PDSO-N8	1	5 V	.8 mm	3 mm	Not Qualified	2.4 V	2.3 mA		e3	30	260	3 mm	2180
LMH2180TMX/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	BALL	8	FBGA	SQUARE	UNSPECIFIED	YES					TR		2.5/5			GRID ARRAY, FINE PITCH	BGA8,3X3,16			Clock Drivers	.4 mm	85 Cel			-40 Cel	TIN SILVER COPPER		BOTTOM	78 MHz	S-XBGA-B8	1		.675 mm		Not Qualified				e1	30	260
LMK00304SQE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1				3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel	3-STATE	.05 ns	-40 Cel		8	QUAD		S-XQCC-N32		3.45 V	.8 mm	5 mm		3.15 V						5 mm	00304
LMK1D1208RHDT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	1.8			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	.575 ns			.5 mm	105 Cel		.02 ns	-40 Cel	NICKEL PALLADIUM GOLD	16	QUAD	2000 MHz	S-PQCC-N28	1	1.89 V	1 mm	5 mm		1.71 V	95 mA		e4	30	260	5 mm
LTC6954IUFF-3#TRPBF	Analog Devices	CLOCK DRIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	SCHMITT TRIGGER	3		CMOS	TR	3.3		10 pF	3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.16X.28,20	.625 ns	2500 Amp		.5 mm	105 Cel	3-STATE		-40 Cel	MATTE TIN	3	QUAD	1400 MHz	R-PQCC-N36		3.45 V	.8 mm	4 mm		3.15 V	320 mA		e3			7 mm
MC10EL34DG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL		5	-5.2		0	SMALL OUTLINE	SOP16,.25	1.2 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	3	DUAL	1100 MHz	R-PDSO-G16	1	5.7 V	1.75 mm	3.9 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	9.9 mm	10EL
NB2309AI1D	Onsemi	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		3.3	3.3		0	SMALL OUTLINE	SOP16,.25		12 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.25 ns	-40 Cel	TIN LEAD	8	DUAL	133.33 MHz	R-PDSO-G16		3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e0		235	9.9 mm	2309
NB3N111KMNR4G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1				3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	1.1 ns		Clock Drivers	.5 mm	85 Cel		.1 ns	-40 Cel	MATTE TIN	10	QUAD		S-XQCC-N32	1	3.6 V	1 mm	5 mm	Not Qualified	3 V			e3	30	260	5 mm	3N
NB7V32MMNTXG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	10000000000 Hz		TR	1.8	1.8/2.5		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.275 ns		Prescaler/Multivibrators	.5 mm	85 Cel		.05 ns	-40 Cel	NICKEL GOLD PALLADIUM	1	QUAD		S-XQCC-N16	1	2.625 V	1 mm	3 mm	Not Qualified	1.71 V	100 mA	IT ALSO OPERATES AT 2.5V SUPPLY		30	260	3 mm	7V
SI53108-A01AGM	Silicon Labs	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1				3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		4.5 ns			.4 mm	85 Cel		.05 ns	-40 Cel		16	QUAD		S-XQCC-N48		3.465 V	.95 mm	6 mm		3.135 V						6 mm	53108
SN65EPT22DGK	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2			TUBE	3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.55 ns			.65 mm	85 Cel		.2 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL		S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified	3 V	50 mA		e4	30	260	3 mm	65EL
SN65EPT22DGKR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2			TR	3.3			1	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.55 ns			.65 mm	85 Cel		.05 ns	-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		S-PDSO-G8	1	3.6 V	1.1 mm	3 mm		3 V	50 mA		e4	30	260	3 mm	65EL
SN65EPT22DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2		CMOS	TR	3.3			0	SMALL OUTLINE		.55 ns			1.27 mm	85 Cel		.2 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL		S-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V	50 mA		e4	30	260	4.9 mm	65EL

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.