INDUSTRIAL Clock Drivers & Buffers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MPC9449FAR2	Motorola	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			2.5			0	FLATPACK, LOW PROFILE		7 ns			.65 mm	85 Cel	3-STATE	.3 ns	-40 Cel		15	QUAD		S-PQFP-G52		2.625 V	1.7 mm	10 mm	Not Qualified	2.375 V		CAN ALSO OPERATE WITH 3.3V SUPPLY				10 mm
PI49FCT3805CHE	Diodes Incorporated	CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SCHMITT TRIGGER	2	CMOS		3.3	3.3	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	4.5 ns	24 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.5 ns	-40 Cel	MATTE TIN	4	DUAL		R-PDSO-G20	1	3.6 V	2 mm	5.3 mm	Not Qualified	3 V			e3			7.2 mm	FCT
PI49FCT3805DS	Pericom Semiconductor	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SCHMITT TRIGGER	2	CMOS		3.3	3.3		0	SMALL OUTLINE	SSOP20,.25	3 ns	12 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.27 ns	-40 Cel	TIN LEAD	5	DUAL		R-PDSO-G20		3.6 V	2.65 mm	7.5 mm	Not Qualified	3 V			e0			12.8 mm	FCT
PI6C2410QE	Pericom Semiconductor	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		12 Amp	Clock Drivers	.635 mm	85 Cel		.2 ns	-40 Cel		4	DUAL	160 MHz	R-PDSO-G24		3.6 V	1.75 mm	3.9116 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	8.65 mm	6C
PI6CL10804WEX	Diodes Incorporated	CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			1.2	1.2/1.5		0	SMALL OUTLINE	SOP8,.25	3.5 ns	8 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.1 ns	-40 Cel	MATTE TIN	4	DUAL	200 MHz	R-PDSO-G8	1	1.3 V	1.75 mm	3.885 mm	Not Qualified	1.1 V		ALSO OPERATES AT 1.5V SUPPLY	e3			4.9 mm	6C
PI90LV14L	Pericom Semiconductor	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	4 ns		Clock Drivers	.65 mm	85 Cel	3-STATE	.19 ns	-40 Cel	TIN LEAD	5	DUAL		R-PDSO-G20	1		1.2 mm	4.4 mm	Not Qualified				e0			6.5 mm	90LV
SI53019-A01AGMR	Silicon Labs	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	72	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel	3-STATE		-40 Cel		38	QUAD		S-XQCC-N72		3.465 V	.95 mm	10 mm		3.135 V						10 mm	53019
SI53102-A2-GMR	Silicon Labs	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			2.5	2.5/3.3		0	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.06,16			Clock Drivers	.4 mm	85 Cel		.1 ns	-40 Cel		4	DUAL		R-PDSO-N8	2	2.75 V	.8 mm	1.4 mm	Not Qualified	2.25 V		ALSO OPERATES AT 3.3 V SUPPLY		40	260	1.6 mm	53102
SI53112-A00AGM	Silicon Labs	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		4.5 ns			.5 mm	85 Cel	3-STATE	.05 ns	-40 Cel		24	QUAD		S-XQCC-N64		3.465 V	.95 mm	9 mm		3.135 V				NOT SPECIFIED	NOT SPECIFIED	9 mm	53112
SI53119-A01AGM	Silicon Labs	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	72	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel			-40 Cel		38	QUAD		S-XQCC-N72		3.465 V	.95 mm	10 mm		3.135 V				NOT SPECIFIED	NOT SPECIFIED	10 mm	53119
SI53152-A01AGMR	Silicon Labs	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20		1 Amp	Clock Drivers	.5 mm	85 Cel			-40 Cel		4	QUAD		S-XQCC-N24		3.465 V	.8 mm	4 mm	Not Qualified	3.135 V						4 mm	53152
SI53156-A01AGM	Silicon Labs	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		1 Amp	Clock Drivers	.5 mm	85 Cel			-40 Cel		12	QUAD		S-XQCC-N32		3.465 V	.8 mm	5 mm	Not Qualified	3.135 V						5 mm	53156
SI5330A-A00200-GM	Silicon Labs	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			3.3	1.8/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20		4 Amp	Clock Drivers	.5 mm	85 Cel	OPEN-DRAIN	.1 ns	-40 Cel		8	QUAD	710 MHz	S-XQCC-N24		3.63 V	.9 mm	4 mm	Not Qualified	2.97 V						4 mm	ECL
SI5330B-A00205-GM	Silicon Labs	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			2.5	1.8/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20		4 Amp	Clock Drivers	.5 mm	85 Cel	OPEN-DRAIN	.1 ns	-40 Cel		8	QUAD	710 MHz	S-XQCC-N24		2.75 V	.9 mm	4 mm	Not Qualified	2.25 V				NOT SPECIFIED	NOT SPECIFIED	4 mm	5330
SI5330B-B00204-GM	Silicon Labs	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		4 ns			.5 mm	85 Cel		.1 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	QUAD	710 MHz	S-XQCC-N24	2	3.63 V	.9 mm	4 mm		2.97 V			e4	40	260	4 mm	5330
SI5330C-A00207-GM	Silicon Labs	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1			3.3	1.8/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20		4 Amp	Clock Drivers	.5 mm	85 Cel	OPEN-DRAIN	.1 ns	-40 Cel		8	QUAD	250 MHz	S-XQCC-N24		3.63 V	.9 mm	4 mm	Not Qualified	2.97 V						4 mm	5330
SI5330F-B00216-GMR	Silicon Labs	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	STANDARD	1			1.8			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		4 ns			.5 mm	85 Cel		.1 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	QUAD	200 MHz	S-XQCC-N24	2	1.98 V	.9 mm	4 mm		1.71 V			e4	40	260	4 mm	5330
SI5330M-B00231-GM	Silicon Labs	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	STANDARD	1			3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		4 ns			.5 mm	85 Cel		.1 ns	-40 Cel		4	QUAD		S-XQCC-N24	3	3.63 V	.9 mm	4 mm		2.97 V				40	260	4 mm	5330
SI53323-B-GM	Silicon Labs	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			2.5	2.5/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.975 ns		Clock Drivers	.5 mm	85 Cel		.05 ns	-40 Cel		8	QUAD		S-XQCC-N16		2.63 V	.9 mm	3 mm	Not Qualified	2.38 V		ALSO OPERATES AT 3.3 V SUPPLY		NOT SPECIFIED	NOT SPECIFIED	3 mm	53323
SI53345-B-GM	Silicon Labs	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			1.8			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.05 ns			.5 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	20	QUAD		S-XQCC-N32	2	1.89 V	1 mm	5 mm		1.71 V		ALSO OPERATES AT 2.5V VCC AND 3.3V VCC NOMINAL SUPPLY	e3	40	260	5 mm	53345
SI53360-B-GT	Silicon Labs	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1	CMOS		1.8				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 ns	12 Amp		.65 mm	85 Cel	3-STATE	.15 ns	-40 Cel		8	DUAL		R-PDSO-G16		1.89 V	1.2 mm	4.4 mm		1.71 V		ALSO OPERATES AT 2.5 V AND 3.3 V SUPPLY				5 mm	53360
SI53365-B-GT	Silicon Labs	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		1.8				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 ns	12 Amp		.65 mm	85 Cel	3-STATE	.15 ns	-40 Cel		8	DUAL		R-PDSO-G16		1.89 V	1.2 mm	4.4 mm		1.71 V		ALSO OPERATES AT 2.5 V AND 3.3 V SUPPLY		NOT SPECIFIED	NOT SPECIFIED	5 mm	53365
SL18861DI	Silicon Labs	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	10	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			1.8			0	SMALL OUTLINE, VERY THIN PROFILE					.4 mm	85 Cel	3-STATE		-40 Cel		3	DUAL		R-PDSO-N10		1.9 V	.8 mm	1.4 mm	Not Qualified	1.7 V						2 mm	18861
SY89831UMG-TR	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		TR	2.5			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.45 ns			.5 mm	85 Cel		.02 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	QUAD	2000 MHz	S-XQCC-N16	2	2.625 V	.95 mm	3 mm	Not Qualified	2.375 V		IT CAN ALSO OPERATE WITH 3.3V SUPPLY	e4			3 mm	89831
ZL30265LDG1	Microchip Technology	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	56	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1		TRAY	1.8			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC56,.31SQ,20	3.8 ns			.5 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.1 ns	-40 Cel		12	QUAD	1045 MHz	S-XQCC-N56		1.89 V	1 mm	8 mm		1.71 V	852 mA	ALSO OPERATES AT 2.5 V AND 3.3 V POWER SUPPLY				8 mm	30265
ZL40214LDG1	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	CMOS	TRAY	2.5			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2 ns			.5 mm	85 Cel		.1 ns	-40 Cel		8	QUAD		S-XQCC-N16		2.625 V	1 mm	3 mm		2.375 V		ALSO OPERATES AT 3.3 V SUPPLY				3 mm	4000/14000/40000
ZL40294LDF6	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	80	HBGA	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	CMOS	TR	3.3			0	GRID ARRAY, HEAT SINK/SLUG		3 ns			.5 mm	85 Cel	3-STATE WITH SERIES RESISTOR	.05 ns	-40 Cel		40	BOTTOM	250 MHz	S-XBGA-N80		3.465 V	.8 mm	6 mm		3.135 V	308 mA					6 mm	4000/14000/40000
AD9516-3BCPZ-REEL7	Analog Devices	CLOCK DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1			3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	2.6 ns		Clock Drivers	.5 mm	85 Cel	3-STATE	.675 ns	-40 Cel	MATTE TIN	10	QUAD	2950 MHz	S-XQCC-N64	3	3.465 V	1 mm	9 mm	Not Qualified	3.135 V			e3	30	260	9 mm	9516
PL133-47SI	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		TUBE	2.5			0	SMALL OUTLINE		9.2 ns			1.27 mm	85 Cel		.25 ns	-40 Cel	MATTE TIN	4	DUAL		R-PDSO-G8		3.63 V	1.75 mm	3.9 mm		2.25 V			e3			4.9 mm	PL133
SY100E222LTY	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	52	LQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TRAY	3.3			0	FLATPACK, LOW PROFILE		1.57 ns			.65 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	15	QUAD		S-PQFP-G52	3	3.6 V	1.6 mm	10 mm	Not Qualified	3 V		ALSO OPERATES AT -3V TO -3.6V SUPPLY AT VCC = 0V	e3			10 mm	100E
SY56028XRMG	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1		TUBE	2.5			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.36 ns			.5 mm	85 Cel		.015 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	QUAD	4500 MHz	S-XQCC-N32	2	2.625 V	.9 mm	5 mm	Not Qualified	2.375 V			e4	40	260	5 mm	ECL
SY56572XRMG	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1		TUBE	2.5			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.36 ns			.5 mm	85 Cel		.015 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	QUAD	4500 MHz	S-XQCC-N32	2	2.625 V	.9 mm	5 mm	Not Qualified	2.375 V			e4	40	260	5 mm	56572
SY58011UMG-TR	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		TR	2.5			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.25 ns			.5 mm	85 Cel		.015 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	QUAD	7000 MHz	S-XQCC-N16	2	3.6 V	.95 mm	3 mm	Not Qualified	2.375 V		CAN ALSO OPERATE WITH 3.3V SUPPLY	e4			3 mm	58011
SY58031UMG-TR	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		TR	2.5			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	.27 ns			.5 mm	85 Cel		.02 ns	-40 Cel	NICKEL PALLADIUM GOLD	16	QUAD	6000 MHz	S-XQCC-N32	2	2.625 V	.9 mm	5 mm	Not Qualified	2.375 V	330 mA		e4		260	5 mm	58031
SY58034UMG-TR	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1		TR	2.5			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.29 ns			.5 mm	85 Cel		.02 ns	-40 Cel	NICKEL PALLADIUM GOLD	12	QUAD	6000 MHz	S-XQCC-N32	2	2.625 V	.9 mm	5 mm	Not Qualified	2.375 V		CAN ALSO OPERATE WITH 3.3V SUPPLY	e4			5 mm	58034
SY89202UMG	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		TUBE	2.5			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.93 ns			.5 mm	85 Cel		.05 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	QUAD	1500 MHz	S-XQCC-N32	2	2.625 V	.9 mm	5 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3V SUPPLY	e4			5 mm	89202
SY89467UHY	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		TRAY	2.5			0	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH		1.2 ns			.5 mm	85 Cel		.3 ns	-40 Cel	MATTE TIN	20	QUAD	1500 MHz	S-PQFP-G64	3	2.625 V	1.2 mm	10 mm	Not Qualified	2.375 V		IT CAN ALSO OPERATES WITH 3V TO 3.6V SUPPLY	e3			10 mm	89467
ZL30253LDG1	Microchip Technology	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL MUX	1		TRAY	1.8		15 pF	0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		3 Amp		.5 mm	85 Cel			-40 Cel	Matte Tin (Sn)	6	QUAD	1035 MHz	S-XQCC-N32		1.89 V	1 mm	5 mm		1.71 V	297 mA	IT ALSO REQUIRED 3.3V SUPPLY	e3			5 mm	30253
ZL40203LDG1	Microchip Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1	CMOS	TRAY	2.375	2.5/3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	2 ns		Clock Drivers	.5 mm	85 Cel		.1 ns	-40 Cel		8	QUAD		S-XQCC-N16		2.625 V	1 mm	3 mm	Not Qualified	2.375 V		ALSO OPERATES AT 3.3 V SUPPLY				3 mm	4000/14000/40000
ZL40264LDG1	Microchip Technology	CLOCK DRIVER	INDUSTRIAL	NO LEAD	20	HQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS	TRAY	2.5				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	1 ns			.5 mm	85 Cel		.05 ns	-40 Cel		4	QUAD	400 MHz	S-PQCC-N20		2.625 V	1 mm	4 mm		2.375 V	53 mA					4 mm
CDC391DBLE	Texas Instruments		INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			BICMOS		5	5			SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		48 Amp	Clock Drivers	.635 mm	85 Cel			-40 Cel			DUAL		R-PDSO-G16					Not Qualified
SNCDC337DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5		50 pF	0	SMALL OUTLINE		9 ns			1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL	80 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	4.75 V	85 mA	4 OUTPUTS ARE BUFFERED & THE OTHER 4 ARE DIVIDED BY TWO				12.8 mm	ABT
SN65ELT22DGK	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2		TUBE	5			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		1.1 ns		Clock Driver	.65 mm	85 Cel		.1 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL		S-PDSO-G8	1	5.7 V	1.1 mm	3 mm	Not Qualified	4.2 V			e4	30	260	3 mm	65ELT
SNCDC209DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		5		50 pF	0	SMALL OUTLINE		10.1 ns			1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL		R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	3 V		CAN BE OPERATED FROM 3.3V SUPPLY ALSO; WITH DUAL OUTPUT ENABLE; CENTER PIN VCC AND GND				12.8 mm	AC
SNCDC209-7DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		5		50 pF	0	SMALL OUTLINE		10.1 ns			1.27 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL		R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	3 V		CAN BE OPERATED FROM 3.3V SUPPLY ALSO; WITH DUAL OUTPUT ENABLE; CENTER PIN VCC AND GND				12.8 mm	AC
CDC329ADRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		5	5		0	SMALL OUTLINE	SOP16,.25	5.9 ns		Clock Drivers	1.27 mm	85 Cel		1.5 ns	-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL	80 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	4.75 V		POLARITY CONTROL SELECTS TRUE OR COMPLEMENTARY OUTPUTS	e4	30	260	9.9 mm	329
CDC5801ADBQ	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		TUBE	3.3			1	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL	62.5 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e4	30	260	8.65 mm	CDC
SN65LVEP11DGKR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	2.5	+-2.5/+-3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.3 ns		Clock Drivers	.65 mm	85 Cel		.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL		S-PDSO-G8	1	3.8 V	1.1 mm	3 mm	Not Qualified	2.375 V	45 mA	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e4	30	260	3 mm	65LVEP

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.