INDUSTRIAL Clock Drivers & Buffers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Control Type	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
LMH2180YD	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	STANDARD	2					2.7			0	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel			-40 Cel		2	DUAL		75 MHz	S-XDSO-N8		5 V	.8 mm	3 mm	Not Qualified		2.4 V						3 mm	2180
CDC209-7DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		4	TR	5	3.3/5	50 pF	0	SMALL OUTLINE	SOP20,.4	15.6 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.52 mm	Not Qualified	TRUE	3 V				NOT SPECIFIED	NOT SPECIFIED	12.825 mm	209
CDC351IDBRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.2 ns	32 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL		100 MHz	R-PDSO-G24	1	3.6 V	2 mm	5.3 mm	Not Qualified		3 V			e4	30	260	8.2 mm	351
CDC328ADB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	5 ns	48 Amp	Clock Drivers	.65 mm	85 Cel		1 ns	-40 Cel		6	DUAL		100 MHz	R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	6.2 mm	328
CDCR83ADBQG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1					3.3			1	SMALL OUTLINE, SHRINK PITCH				Clock Driver	.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL			R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified		3.135 V			e4	30	260	8.65 mm	CDC
SN65LVEP11D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				TUBE	2.5	+-2.5/+-3.3		0	SMALL OUTLINE	SOP8,.25	.3 ns		Clock Drivers	1.27 mm	85 Cel		.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			R-PDSO-G8	1	3.8 V	1.75 mm	3.9 mm	Not Qualified		2.375 V	45 mA	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e4	30	260	4.9 mm	65LVEP
CDC209N	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	2	CMOS		4		5	3.3/5	50 pF	0	IN-LINE	DIP20,.3	15.6 ns	24 Amp	Bus Driver/Transceivers	2.54 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL	ENABLE LOW	60 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V				NOT SPECIFIED	NOT SPECIFIED	24.325 mm	209
SNCDC392DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE		5 ns			1.27 mm	85 Cel	3-STATE	2.2 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
CDC329DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE	SOP16,.25	6.6 ns	64 Amp	Clock Drivers	1.27 mm	85 Cel		2.5 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	329
74AC11208DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		4		5	3.3/5	50 pF	0	SMALL OUTLINE	SOP20,.4	10.1 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL	ENABLE LOW		R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	3 V	.08 mA			NOT SPECIFIED	NOT SPECIFIED	12.8 mm	AC
SN65LVELT22DGK	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2				TUBE	3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.55 ns			.65 mm	85 Cel		.1 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			S-PDSO-G8	1	3.8 V	1.1 mm	3 mm	Not Qualified		3 V			e4	30	260	3 mm	65EL
SN65EL11D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				TUBE	5	+-5		0	SMALL OUTLINE	SOP8,.25	.3 ns		Clock Drivers	1.27 mm	85 Cel		.015 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified		4.2 V	26 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e4	30	260	4.9 mm	65EL
SN65LVEP11DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				TR	2.5	+-2.5/+-3.3		0	SMALL OUTLINE	SOP8,.25	.3 ns		Clock Drivers	1.27 mm	85 Cel		.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			R-PDSO-G8	1	3.8 V	1.75 mm	3.9 mm	Not Qualified		2.375 V	45 mA	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e4	30	260	4.9 mm	65LVEP
CGS2535TV	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	QCCN	SQUARE	PLASTIC/EPOXY	YES	STANDARD	4					3.3			0	CHIP CARRIER		5 ns				85 Cel		.35 ns	-40 Cel		4	QUAD			S-PQCC-N28		3.6 V					3 V		IT ALSO OPERATS AT 5V NOM					2535
SNCDC209-7N	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	2	CMOS				5		50 pF	0	IN-LINE		10.1 ns			2.54 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL			R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified		3 V		CAN BE OPERATED FROM 3.3V SUPPLY ALSO; WITH DUAL OUTPUT ENABLE; CENTER PIN VCC AND GND				24.325 mm	AC
CDC328ADBRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TR	5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	5 ns	48 Amp	Clock Drivers	.65 mm	85 Cel		1 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	6	DUAL		100 MHz	R-PDSO-G16	1	5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V		COMBINATIONS OF TRUE AND COMPLEMENTARY OUTPUTS POSSIBLE WITH POLARITY-CONTROL INPUTS	e4	NOT SPECIFIED	260	6.2 mm	328
CDC209-7N	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	2	CMOS		4		5	3.3/5	50 pF	0	IN-LINE	DIP20,.3	15.6 ns	24 Amp	Bus Driver/Transceivers	2.54 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL	ENABLE LOW	60 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V				NOT SPECIFIED	NOT SPECIFIED	24.325 mm	CDC
CDC7005RGZTG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1					3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.95 ns			.5 mm	85 Cel	3-STATE	.06 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	QUAD		800 MHz	S-PQCC-N48	3	3.6 V	1 mm	7 mm	Not Qualified		3 V		INTEGRATED LOW-NOISE OP AMP	e4	30	260	7 mm	7005
CDC329DLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5			0	SMALL OUTLINE		6.6 ns			1.27 mm	85 Cel		2.5 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V						9.9 mm	CDC
CDC339DWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE	SOP20,.4	9 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	12.8 mm	339
CDC339DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE	SOP20,.4	9 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	12.8 mm	CDC
SNCDC328DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5.4 ns			.65 mm	85 Cel		2.6 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	30 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				6.2 mm	ABT
SN65EL11DGKR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1					5	+-5		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	.3 ns		Clock Drivers	.65 mm	85 Cel		.015 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			S-PDSO-G8	1	5.7 V	1.1 mm	3 mm	Not Qualified		4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e4	30	260	3 mm	65EL
CDCP1803RGET	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				TR	3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	.6 ns		Clock Drivers	.5 mm	85 Cel	3-STATE	.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	3	QUAD		800 MHz	S-PQCC-N24	2	3.6 V	1 mm	4 mm	Not Qualified		3 V			e4	30	260	4 mm	1803
CDCS503IPWRQ1	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		AEC-Q100			3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	105 Cel			-40 Cel		1	DUAL		108 MHz	R-PDSO-G8		3.6 V	1.2 mm	3 mm			3 V				NOT SPECIFIED	NOT SPECIFIED	4.4 mm	CDC
CDCF5801DBQG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS				3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		16 Amp	Clock Drivers	.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		280 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V		DIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE	e4	30	260	8.65 mm	5801
LMH2180TM/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	BALL	8	FBGA	SQUARE	UNSPECIFIED	YES						TR		2.5/5			GRID ARRAY, FINE PITCH	BGA8,3X3,16			Clock Drivers	.4 mm	85 Cel			-40 Cel	TIN SILVER COPPER		BOTTOM		78 MHz	S-XBGA-B8	1		.675 mm		Not Qualified					e1	30	260
CDC5801DBQ	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				TUBE	3.3			1	SMALL OUTLINE, SHRINK PITCH			16 Amp	Clock Driver	.635 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		500 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V	70 mA		e4	30	260	8.65 mm	5801
CDC392D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE	SOP16,.25	6.5 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	2.2 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	392
CDCS503TPWRQ1	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		AEC-Q100		TR	3.3		15 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			12 Amp		.65 mm	105 Cel			-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		108 MHz	R-PDSO-G8	3	3.6 V	1.2 mm	3 mm			3 V			e4	30	260	4.4 mm	CDC
CDC3RL02YFPR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	BALL	8	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				TR	1.8	2.5/5	50 pF	0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,16		8 Amp	Clock Drivers	.4 mm	85 Cel			-40 Cel	TIN SILVER COPPER	2	BOTTOM		52 MHz	R-PBGA-B8	1	5.5 V	.5 mm	.77 mm	Not Qualified		2.3 V			e1	30	260	1.57 mm	CDC
CDC5801ADBQG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1					3.3			1	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		500 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	30	260	8.65 mm	CDC
CDC209DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		4	TR	5	3.3/5	50 pF	0	SMALL OUTLINE	SOP20,.4	15.6 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.52 mm	Not Qualified	TRUE	3 V				NOT SPECIFIED	NOT SPECIFIED	12.825 mm	209
SNCDC329DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5			0	SMALL OUTLINE		6.6 ns			1.27 mm	85 Cel		2.5 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V						9.9 mm	CDC
LMH2180TMX	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	BALL	8	VFBGA	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2					2.7			0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH					.4 mm	85 Cel			-40 Cel		2	BOTTOM		75 MHz	S-PBGA-B8		5 V	.675 mm	1.215 mm	Not Qualified		2.4 V						1.215 mm	2180
SNCDC328AD	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE		5 ns			1.27 mm	85 Cel		1 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	40 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
CDC337DWG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TUBE	5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	9 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	8	DUAL		80 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.52 mm	Not Qualified		4.75 V			e4	NOT SPECIFIED	260	12.825 mm	337
SNCDC337DB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		9 ns			.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	85 mA	4 OUTPUTS ARE BUFFERED & THE OTHER 4 ARE DIVIDED BY TWO				7.2 mm	ABT
CDC339DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			TUBE	5	5		0	SMALL OUTLINE	SOP20,.4	9 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL		80 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.5 mm	Not Qualified		4.75 V	85 mA		e4	30	260	12.8 mm	CDC
SN65LVELT23D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2				TUBE	3.3		20 pF	0	SMALL OUTLINE		2.5 ns	24 Amp		1.27 mm	85 Cel		.18 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL		180 MHz	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	30	260	4.9 mm	65LVEL
74ACT11208DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		4	TR	5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	11.5 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL	ENABLE LOW		R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	12.8 mm	ACT
SN0305042RTHT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				TR	3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.6 ns	12 Amp		.5 mm	85 Cel	3-STATE	.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	QUAD		800 MHz	S-PQCC-N24	2	3.6 V	1 mm	4 mm	Not Qualified		3 V		3 LVPECL DIFFERENTIAL CLOCK OUTPUTS AND SINGLE ENDED LVCMOS OUTPUT	e4	30	260	4 mm	1803
CDCF5801ADBQ	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			TUBE	3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		40 Amp	Clock Drivers	.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		280 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V		DIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE	e4	30	260	8.65 mm	5801
CDCP1803RGETG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				TR	3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	.6 ns		Clock Drivers	.5 mm	85 Cel	3-STATE	.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	3	QUAD		800 MHz	S-PQCC-N24	2	3.6 V	1 mm	4 mm	Not Qualified		3 V			e4	30	260	4 mm	1803
SN65ELT21D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				TUBE	5		20 pF	0	SMALL OUTLINE		4.5 ns			1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL			R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified		4.2 V			e4	30	260	4.9 mm	65ELT
CDC337DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS				5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	9 ns	32 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	7.2 mm	337
CDC7005ZVA	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	64	LFBGA	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1				TRAY	3.3			0	GRID ARRAY, LOW PROFILE, FINE PITCH		.95 ns	6 Amp	Clock Driver	.8 mm	85 Cel	3-STATE	.06 ns	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	5	BOTTOM		800 MHz	S-PBGA-B64	3	3.6 V	1.4 mm	8 mm	Not Qualified		3 V	265 mA	INTEGRATED LOW-NOISE OP AMP	e1	NOT SPECIFIED	260	8 mm	7005
CDC208DWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS		4	TR	5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	NOT SPECIFIED	260	12.8 mm	208

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.