INDUSTRIAL Clock Drivers & Buffers 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Control Type	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
CDC5801ADBQRG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			1	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		500 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	30	260	8.65 mm	CDC
74AC11208N	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	2	CMOS	4		5	3.3/5	50 pF	0	IN-LINE	DIP20,.3	10.1 ns	24 Amp	Bus Driver/Transceivers	2.54 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL	ENABLE LOW		R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	.08 mA			NOT SPECIFIED	NOT SPECIFIED	24.325 mm	AC
SNCDC329DLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5			0	SMALL OUTLINE		6.6 ns			1.27 mm	85 Cel		2.5 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V						9.9 mm	CDC
CDC392DBLE	Texas Instruments		INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			BICMOS			5	5			SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		32 Amp	Clock Drivers	.635 mm	85 Cel			-40 Cel			DUAL			R-PDSO-G16					Not Qualified
SN65EPT22D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2			TUBE	3.3			0	SMALL OUTLINE		.55 ns			1.27 mm	85 Cel		.2 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V	50 mA		e4	30	260	4.9 mm	65EL
LMH2190TMX-38/NOPB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	BALL	16	VFBGA	SQUARE	PLASTIC/EPOXY	YES	STANDARD	1				3.5	3.5		0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA16,4X4,20	11 ns		Clock Drivers	.4 mm	85 Cel		8.5 ns	-40 Cel	TIN SILVER COPPER	4	BOTTOM			S-PBGA-B16	1	5.5 V	.675 mm	1.61 mm	Not Qualified		2.5 V			e1	30	260	1.61 mm	2190
CGS2535TVX	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	STANDARD	4	CMOS			3.3	3.3/5	50 pF	0	CHIP CARRIER	LDCC28,.5SQ	5 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	-40 Cel	TIN LEAD	4	QUAD			S-PQCC-J28	1	3.6 V	4.57 mm	11.43 mm	Not Qualified		3 V	.235 mA	IOH,VOH,IOL & VOL @ VCC=4.5V	e0		220	11.43 mm	ABT
SNCDC208DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		11.5 ns			.65 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				7.2 mm	ACT
SNCDC208-7DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS			5		50 pF	0	SMALL OUTLINE		11.5 ns			1.27 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				12.8 mm	ACT
SN65EPT21DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		TR	3.3		20 pF	0	SMALL OUTLINE		1.9 ns	24 Amp		1.27 mm	85 Cel		.25 ns	-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		300 MHz	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	30	260	4.9 mm	65EP
SNCDC328D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE		5.4 ns			1.27 mm	85 Cel		2.6 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	30 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
HPA00394ZQLR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	52	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1				1.8			0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH					.65 mm	85 Cel	3-STATE	.035 ns	-40 Cel	TIN SILVER COPPER	20	BOTTOM		410 MHz	R-PBGA-B52	2	1.9 V	1 mm	4.5 mm			1.7 V			e1	30	260	7 mm	877
SNCDC391DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5 ns			.65 mm	85 Cel	3-STATE	1 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	40 mA	WITH THREE CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				6.2 mm	ABT
CDCP1803RGER	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	3.3	3.3		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	.6 ns		Clock Drivers	.5 mm	85 Cel	3-STATE	.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	3	QUAD		800 MHz	S-PQCC-N24	2	3.6 V	1 mm	4 mm	Not Qualified		3 V			e4	30	260	4 mm	1803
CDC339NSR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE	SOP20,.3	9 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	12.6 mm	CDC
CDCF5801ADBQRG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		TR	3.3	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		40 Amp	Clock Drivers	.635 mm	85 Cel	3-STATE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	1	DUAL		280 MHz	R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V		DIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE	e4	NOT SPECIFIED	260	8.65 mm	5801
CDCFR83DBQRG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		TR	3.3			1	SMALL OUTLINE, SHRINK PITCH			36 Amp		.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		533 MHz	R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified		3.135 V	100 mA		e4	30	260	8.65 mm	83
SN65EPT23DGK	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		TUBE	3.3		20 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		1.9 ns	24 Amp		.65 mm	85 Cel		.11 ns	-40 Cel	NICKEL PALLADIUM GOLD SILVER	2	DUAL		300 MHz	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified		3 V			e4	30	260	3 mm	65EP
LMH2180SDX	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	STANDARD	2				2.7			0	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel			-40 Cel		2	DUAL		75 MHz	S-XDSO-N8		5 V	.8 mm	3 mm	Not Qualified		2.4 V						3 mm	2180
CDCR83DBQRG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			3.3			0	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		400 MHz	R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified		3.135 V			e4	30	260	8.65 mm	83
SNCDC328ADB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5.5 ns			.65 mm	85 Cel		1.1 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	32 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				6.2 mm	ABT
CDC3S04YFFR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	BALL	20	VFBGA	RECTANGULAR	UNSPECIFIED	YES	STANDARD	1			TR	1.8	1.8	10 pF	0	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA20,4X5,16	3 ns	3 Amp	Clock Drivers	.4 mm	85 Cel		.05 ns	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	4	BOTTOM		52 MHz	R-XBGA-B20	1	1.95 V	.625 mm	1.905 mm	Not Qualified		1.65 V			e1	NOT SPECIFIED	260	2.305 mm	CDC
CGS74CT2525N	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL			DIP				STANDARD	1	CMOS			5			0			10.1 ns			2.54 mm	85 Cel		.55 ns	-40 Cel		8						5.5 V	5.08 mm	7.62 mm			4.5 V						19.18 mm	CMOS
CDCFR83DBQ	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			3.3			1	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		533 MHz	R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified		3.135 V			e4	30	260	8.65 mm	83
SNCDC208-7DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		11.5 ns			.65 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				7.2 mm	ACT
CDC339DB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		TUBE	5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	9 ns	48 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL		80 MHz	R-PDSO-G20	1	5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	85 mA		e4	30	260	7.2 mm	CDC
CDC208NSRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS	4	TR	5	5	50 pF	0	SMALL OUTLINE	SOP20,.3	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	NOT SPECIFIED	260	12.6 mm	208
CDCDB803RSLT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS		TR	3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	3 ns			.4 mm	105 Cel		.05 ns	-40 Cel	NICKEL PALLADIUM GOLD	16	QUAD		250 MHz	S-PQCC-N48	1	3.6 V	1 mm	6 mm			3 V	9 mA		e4		260	6 mm	CDC
SN65EPT21DGK	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		TUBE	3.3		20 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		1.9 ns	24 Amp		.65 mm	85 Cel		.25 ns	-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		300 MHz	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified		3 V			e4	30	260	3 mm	65EP
SNCDC329AD	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE		5.9 ns			1.27 mm	85 Cel		1.5 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	40 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT
CDC5806PWR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25				.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	6	DUAL			R-PDSO-G20	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e4	30	260	6.5 mm	5806
SNCDC208N	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	2	CMOS			5		50 pF	0	IN-LINE		11.5 ns			2.54 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL			R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				24.325 mm	ACT
CDC351IDWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			3.3	3.3		0	SMALL OUTLINE	SOP24,.4	4.2 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel		10	DUAL		100 MHz	R-PDSO-G24		3.6 V	2.65 mm	7.5 mm	Not Qualified		3 V				NOT SPECIFIED	NOT SPECIFIED	15.4 mm	351
CDC208NSR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS	4	TR	5	5	50 pF	0	SMALL OUTLINE	SOP20,.3	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	30	260	12.6 mm	208
SNCDC208-7DB	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		11.5 ns			.65 mm	85 Cel	3-STATE	.7 ns	-40 Cel		4	DUAL			R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified		4.5 V		WITH DUAL OUTPUT ENABLE & BOTH SHOULD BE HIGH FOR TRI-STATING; CENTER PIN VCC AND GND				7.2 mm	ACT
CDC339NSRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE	SOP20,.3	9 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel		8	DUAL		80 MHz	R-PDSO-G20		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V						12.6 mm	CDC
SN65ELT22D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2			TUBE	5			0	SMALL OUTLINE		1.1 ns			1.27 mm	85 Cel		.1 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			R-PDSO-G8	1	5.7 V	1.75 mm	3.9 mm	Not Qualified		4.2 V			e4	30	260	4.9 mm	65ELT
SN65EPT23DR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		TR	3.3		20 pF	0	SMALL OUTLINE		1.9 ns	24 Amp		1.27 mm	85 Cel		.11 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL		300 MHz	R-PDSO-G8	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V			e4	30	260	4.9 mm	65EP
CDC208DBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2	CMOS	4	TR	5	5	50 pF	0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	11.7 ns	24 Amp	Bus Driver/Transceivers	.65 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	7.2 mm	208
CDC329ADBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5	5		0	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	5.9 ns		Clock Drivers	.65 mm	85 Cel		1.5 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	6.2 mm	329
CDC7005RGZT	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	3.3			0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		.95 ns	6 Amp		.5 mm	85 Cel	3-STATE	.06 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5	QUAD		800 MHz	S-PQCC-N48	3	3.6 V	1 mm	7 mm	Not Qualified		3 V	265 mA	INTEGRATED LOW-NOISE OP AMP	e4	NOT SPECIFIED	260	7 mm	7005
SN65ELT23D	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2			TUBE	5		20 pF	0	SMALL OUTLINE		5 ns	24 Amp		1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL			R-PDSO-G8	1	5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V			e4	30	260	4.9 mm	65ELT
CDCR83DBQ	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS			3.3			0	SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		400 MHz	R-PDSO-G24	2	3.465 V	1.75 mm	3.9 mm	Not Qualified		3.135 V			e4	30	260	8.65 mm	83
SNCDC329ADBLE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE, SHRINK PITCH		5.9 ns			.65 mm	85 Cel		1.5 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	2 mm	5.3 mm	Not Qualified		4.75 V	40 mA					6.2 mm	ABT
V62/12618-01XE	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1				2.5			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		4.5 ns			.65 mm	105 Cel		.15 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL		200 MHz	R-PDSO-G8	1	3.6 V	1.2 mm	4.4 mm			2.3 V			e4	30	260	3 mm	CDCV
SN65LVELT23DGK	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	STANDARD	2			TUBE	3.3		20 pF	0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.5 ns	24 Amp		.65 mm	85 Cel		.18 ns	-40 Cel	NICKEL PALLADIUM GOLD	2	DUAL		180 MHz	S-PDSO-G8	1	3.6 V	1.1 mm	3 mm	Not Qualified		3 V			e4	30	260	3 mm	65LVEL
CAB4AZNRR	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	BALL	253	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			TR	1.2			0	GRID ARRAY, LOW PROFILE, FINE PITCH					.5 mm	95 Cel			-40 Cel	TIN SILVER COPPER	8	BOTTOM		1200 MHz	R-PBGA-B253	3		1.4 mm	8 mm						e1	30	260	13.5 mm	CAB4A
SNCDC329ADR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS			5		50 pF	0	SMALL OUTLINE		5.9 ns			1.27 mm	85 Cel		1.5 ns	-40 Cel		6	DUAL			R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified		4.75 V	40 mA	WITH FOUR CONTROL LINES FOR PROGRAMMING OUTPUT POLARITY				9.9 mm	ABT

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.