PARALLEL IN SERIAL OUT Digital Shift Registers 1,427

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74AHCT165DBLE	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8					SMALL OUTLINE, SHRINK PITCH					.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G16			2 mm	5.3 mm	Not Qualified	COMPLEMENTARY							6.2 mm	AHCT/VHCT
SN74LV166ADBRE4	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	35000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	26 ns		Shift Registers	.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	6.2 mm	LV/LV-A/LVX/H
SN74F166AN	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	110000000 Hz	TTL		8		5	5	50 pF	IN-LINE	DIP16,.3	8 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	110 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	70 mA	CLOCK INHIBIT		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	F/FAST
SN74LS674DWG4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	20000000 Hz	TTL		16	TUBE	5	5	45 pF	SMALL OUTLINE	SOP24,.4	40 ns	24 Amp	Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	28 MHz	R-PDSO-G24	1	5.25 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.75 V	40 mA	PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER; COMMON SERIAL I/O PIN	e4	NOT SPECIFIED	260	15.4 mm	LS
SN74LS597DRE4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5			SMALL OUTLINE	SOP16,.25	60 ns		Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V		SISO OPERATION ALSO AVAILABLE		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	LS
SN74LV165ANSE4	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8		2.5			SMALL OUTLINE		26 ns			1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	10.2 mm	LV/LV-A/LVX/H
SN74165DR	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5			SMALL OUTLINE		31 ns			1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V						9.9 mm	TTL/H/L
CD74HCT597MG4	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS		8		5	5		SMALL OUTLINE	SOP16,.25	57 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	16 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	9.9 mm	HCT
SN74HC166AIPWRQ1	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	CMOS	AEC-Q100	8		5	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	190 ns		Shift Registers	.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	29 MHz	R-PDSO-G16		6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		CLOCK INHIBIT		NOT SPECIFIED	NOT SPECIFIED	5 mm	HC/UH
DM74LS165WM	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5			SMALL OUTLINE		47 ns			1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	25 MHz	R-PDSO-G16		5.25 V	2.65 mm	7.5 mm		COMPLEMENTARY	4.75 V						10.3 mm	LS
SN74LV165APWTE4	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	50000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	26 ns		Shift Registers	.65 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	5 mm	LV/LV-A/LVX/H
SN74LS597D	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	20000000 Hz	TTL		8	TUBE	5		45 pF	SMALL OUTLINE	SOP16,.25	60 ns	24 Amp	Shift Registers	1.27 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	25 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	53 mA	SISO OPERATION ALSO AVAILABLE	e4	NOT SPECIFIED	260	9.9 mm	LS
SN74ALS166NSR	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	45000000 Hz	TTL		8	TR	5	5		SMALL OUTLINE	DIP16,.3	13 ns	8 Amp	Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	24 mA	SISO OPERATION ALSO AVAILABLE	e4	30	260	10.2 mm	ALS
SN74LS589J	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		8		5		30 pF	IN-LINE	DIP16,.3	30 ns		Shift Registers	2.54 mm	70 Cel	RIGHT	3-STATE	POSITIVE EDGE	0 Cel		DUAL	20 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	45 mA			NOT SPECIFIED	NOT SPECIFIED	19.56 mm	LS
SN74HCS166QPWRQ1	Texas Instruments	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	155000000 Hz	CMOS	AEC-Q100	8	TR	5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	40 ns	7.8 Amp		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	155 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm		TRUE	2 V	.002 mA		e4	30	260	5 mm	HC
SN74ALS166DBRG4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	13 ns		Shift Registers	.65 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	6.2 mm	ALS
SN74HCS166QDRQ1	Texas Instruments	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	155000000 Hz	CMOS	AEC-Q100	8	TR	5		50 pF	SMALL OUTLINE	SOP16,.25	40 ns	7.8 Amp		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	155 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm		TRUE	2 V	.002 mA		e4	30	260	9.9 mm	HC
CD74HCT597EE4	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	16000000 Hz	CMOS		8		5	5		IN-LINE	DIP16,.3	57 ns		Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	16 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V		SISO OPERATION ALSO AVAILABLE	e4			19.305 mm	HCT
CD4014BCJ	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		CMOS		8		5			IN-LINE		320 ns			2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL		R-GDIP-T16		15 V	5.08 mm	7.62 mm		TRUE	3 V		LG_MAX				19.94 mm	4000/14000/40000
SN74LV166APWRE4	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	35000000 Hz	CMOS		8		2.5	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	26 ns		Shift Registers	.65 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	5 mm	LV/LV-A/LVX/H
SN74LS166ANE4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	25000000 Hz	TTL		8		5	5		IN-LINE	DIP16,.3	25 ns		Shift Registers	2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V		CLOCK INHIBIT	e4			19.305 mm	LS
SN74F166DR	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5		50 pF	SMALL OUTLINE		9 ns			1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	110 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	60 mA	CLOCK INHIBIT				9.9 mm	F/FAST
SN74LS165N-10	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		8		5		15 pF	IN-LINE		40 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	35 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	36 mA	CLOCK INHIBIT				19.305 mm	LS
SN74ALS166DG4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5	50 pF	SMALL OUTLINE	SOP16,.25	13 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	24 mA	SISO OPERATION ALSO AVAILABLE	e4	30	260	9.9 mm	ALS
SN74165J-00	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL		8		5		15 pF	IN-LINE		31 ns			2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	26 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	63 mA	CLOCK INHIBIT				19.56 mm	TTL/H/L
SN74AHC165N	Texas Instruments	PARALLEL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8					IN-LINE					2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V						19.305 mm	AHC
PSN74HCS165QDYYRQ1	Texas Instruments	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1	120000000 Hz	CMOS	AEC-Q100	8	TR	5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.13,20	45 ns	7.8 Amp		.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	150 MHz	R-PDSO-G16		6 V	1.1 mm	2 mm		COMPLEMENTARY	2 V	.002 mA					4.2 mm	HC
SN74LS674N	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL		16		5		45 pF	IN-LINE	DIP24,.6	40 ns		Shift Registers	2.54 mm	70 Cel	RIGHT	3-STATE	NEGATIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T24		5.25 V	5.08 mm	15.24 mm	Not Qualified	TRUE	4.75 V	40 mA	HOLD MODE; READ/WRITE CONTROL; CHIP SELECT DISABLES BOTH SERIAL & PARALLEL OPERATIONS	e4			31.75 mm	LS
SN74ALS166FN-00	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL		8		5			CHIP CARRIER					1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.5 V		CLOCK INHIBIT				8.9662 mm	ALS
SN74LS166ADR	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1	25000000 Hz	TTL		8	TR	5	5	15 pF	SMALL OUTLINE	SOP16,.25	25 ns	8 Amp	Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	25 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	32 mA	CLOCK INHIBIT	e4	NOT SPECIFIED	260	9.9 mm	LS
SN74ALS166DBLE	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5			SMALL OUTLINE, SHRINK PITCH		13 ns			.65 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	45 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V						6.2 mm	ALS
CD4014BMN	Texas Instruments	PARALLEL IN SERIAL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		CMOS		8		5			IN-LINE		320 ns			2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL		R-PDIP-T16		15 V	5.08 mm	7.62 mm		TRUE	3 V						19.305 mm	4000/14000/40000
SN74ALS166NSRE4	Texas Instruments	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		8		5	5		SMALL OUTLINE	SOP16,.3	13 ns		Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		SISO OPERATION ALSO AVAILABLE	e4	30	260	10.2 mm	ALS
PSN74LV165ABQBR	Texas Instruments	PARALLEL IN SERIAL OUT		NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY		YES	1	35000000 Hz	CMOS		8	TR, 7 INCH	2.5		50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.1X.14,20	26 ns	12 Amp		.5 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		QUAD	85 MHz	R-PQCC-N16		5.5 V	.8 mm	2.5 mm		COMPLEMENTARY	2 V	.02 mA					3.5 mm	LV/LV-A/LVX/H
SN74LV165ABQBR	Texas Instruments	PARALLEL IN SERIAL OUT		NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY		YES	1	35000000 Hz	CMOS		8	TR, 7 INCH	2.5		50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.1X.14,20	26 ns	12 Amp		.5 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	85 MHz	R-PQCC-N16	1	5.5 V	.8 mm	2.5 mm		COMPLEMENTARY	2 V	.02 mA		e4		260	3.5 mm	LV/LV-A/LVX/H
SN74LV165AQWBQBRQ1	Texas Instruments	PARALLEL IN SERIAL OUT		NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY		YES	1	35000000 Hz	CMOS	AEC-Q100	8	TR, 7 INCH	2.5		50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.1X.14,20	26 ns	12 Amp		.5 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	85 MHz	R-PQCC-N16	1	5.5 V	.8 mm	2.5 mm		COMPLEMENTARY	2 V	.02 mA	CLOCK INHIBIT	e4		260	3.5 mm	LV/LV-A/LVX/H
NLV74HC589ADG	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	4000000 Hz	CMOS	AEC-Q100	8		5	2/6		SMALL OUTLINE	SOP16,.25			Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL		R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V			e3	30	260	9.9 mm	HC/UH
MC100E446FNG	Onsemi	PARALLEL IN SERIAL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		ECL		4		5			CHIP CARRIER		1.48 ns			1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	NEGATIVE EDGE	0 Cel	TIN	QUAD	1300 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = OV WITH VEE = -4.2V TO -5.7V; SISO OPERATION ALSO AVAILABLE	e3		260	11.505 mm	100E
MC10E446FNR2	Onsemi	PARALLEL IN SERIAL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		ECL		4		5			CHIP CARRIER		1.48 ns			1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	NEGATIVE EDGE	0 Cel	TIN LEAD	QUAD	1300 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = OV WITH VEE = -4.2V TO -5.7V; SISO OPERATION ALSO AVAILABLE	e0		235	11.505 mm	10E
MC10EP446MNG	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			CHIP CARRIER, VERY THIN PROFILE		1.025 ns			.5 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN	QUAD	3200 MHz	S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	10E
NLV14014BDR2G	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	4000000 Hz	CMOS	AEC-Q100	8		5	5/15		SMALL OUTLINE	SOP16,.25	800 ns		Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL		R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e3	30	260	9.9 mm	4000/14000/40000
MC10EP446FAG	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.025 ns			.8 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN	QUAD	3200 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	7 mm	10E
NLVHC165ADR2G	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20 Hz	CMOS	AEC-Q100	8	TR	5		50 pF	SMALL OUTLINE	SOP16,.25	225 ns			1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL	4 MHz	R-PDSO-G16	1	6 V	2.05 mm	5.27 mm		TRUE	2 V	.16 mA		e3	30	260	9.2 mm	HC
100336PCX	Onsemi	PARALLEL IN SERIAL OUT	OTHER	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		ECL		4					IN-LINE		2 ns			2.54 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	300 MHz	R-PDIP-T24			5.08 mm	10.16 mm		COMPLEMENTARY			CAN ALSO BE OPERATED AS A COUNTER				30.585 mm	100K
MC100E446FNR2	Onsemi	PARALLEL IN SERIAL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		ECL		4		5			CHIP CARRIER		1.48 ns			1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	NEGATIVE EDGE	0 Cel	TIN LEAD	QUAD	1300 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = OV WITH VEE = -4.2V TO -5.7V; SISO OPERATION ALSO AVAILABLE	e0		235	11.505 mm	100E
100336QCX	Onsemi	PARALLEL IN SERIAL OUT	OTHER	NO LEAD	28	QCCN	SQUARE	PLASTIC/EPOXY		YES	1		ECL		4					CHIP CARRIER		1.8 ns			1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		QUAD	350 MHz	S-PQCC-N28			4.57 mm	11.43 mm		COMPLEMENTARY			CAN ALSO BE OPERATED AS A COUNTER				11.43 mm	100K
MC100EP446FA	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY		YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.025 ns			.8 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN LEAD	QUAD	3200 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	7 mm	100E
NLV74HC165ADTR2G	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	20000000 Hz	CMOS	AEC-Q100	8	TR	3	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	225 ns		Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	HC/UH

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.