PARALLEL IN SERIAL OUT Digital Shift Registers 1,427

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MC10EP446FAR2G	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.025 ns		.8 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN	QUAD	3200 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	7 mm	10E
NLV14021BDR2G	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	4000000 Hz	CMOS	AEC-Q100	8		5	5/15		SMALL OUTLINE	SOP16,.25	800 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL		R-PDSO-G16	1	18 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V			e3	30	260	9.9 mm	4000/14000/40000
MC100EP446MNG	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY	YES	1		ECL		8		3.3			CHIP CARRIER, VERY THIN PROFILE		1.025 ns		.5 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	MATTE TIN	QUAD	3200 MHz	S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	100E
100336QIX	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	NO LEAD	28	QCCN	SQUARE	PLASTIC/EPOXY	YES	1		ECL		4					CHIP CARRIER		1.8 ns		1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		QUAD	350 MHz	S-PQCC-N28			4.57 mm	11.43 mm		COMPLEMENTARY			CAN ALSO BE OPERATED AS A COUNTER				11.43 mm	100K
MC100EP446FAR2G	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.025 ns		.8 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN	QUAD	3200 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	7 mm	100E
100336SC	Onsemi	PARALLEL IN SERIAL OUT	OTHER	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL		4					SMALL OUTLINE		1.8 ns		1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	350 MHz	R-PDSO-G24			2.65 mm	7.5 mm		COMPLEMENTARY			CAN ALSO BE OPERATED AS A COUNTER				15.4 mm	100K
MC100E446FN	Onsemi	PARALLEL IN SERIAL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		4		5			CHIP CARRIER		1.48 ns		1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	NEGATIVE EDGE	0 Cel	TIN LEAD	QUAD	1300 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = OV WITH VEE = -4.2V TO -5.7V; SISO OPERATION ALSO AVAILABLE	e0		235	11.505 mm	100E
MC100E446FNR2G	Onsemi	PARALLEL IN SERIAL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		4		5			CHIP CARRIER		1.48 ns		1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	NEGATIVE EDGE	0 Cel	TIN	QUAD	1300 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = OV WITH VEE = -4.2V TO -5.7V; SISO OPERATION ALSO AVAILABLE	e3		260	11.505 mm	100E
MC10EP446MNR4G	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY	YES	1		ECL		8		3.3			CHIP CARRIER, VERY THIN PROFILE		1.025 ns		.5 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN	QUAD	3200 MHz	S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	10E
MC100EP446MNR4G	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY	YES	1		ECL		8		3.3			CHIP CARRIER, VERY THIN PROFILE		1.025 ns		.5 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN	QUAD	3200 MHz	S-PQCC-N32	1	5.5 V	1 mm	5 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	5 mm	100E
NLV74HC589ADTR2G	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	4000000 Hz	CMOS	AEC-Q100	8	TR	5	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Shift Registers	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	5 mm	HC/UH
MC10E446FN	Onsemi	PARALLEL IN SERIAL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		4		5			CHIP CARRIER		1.48 ns		1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	NEGATIVE EDGE	0 Cel	TIN LEAD	QUAD	1300 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = OV WITH VEE = -4.2V TO -5.7V; SISO OPERATION ALSO AVAILABLE	e0		235	11.505 mm	10E
MC54HC597AJ	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS		8		3	2/6		IN-LINE	DIP16,.3	275 ns	Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	40 MHz	R-GDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V			e0			19.495 mm	HC/UH
MC10E446FNG	Onsemi	PARALLEL IN SERIAL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		4		5			CHIP CARRIER		1.48 ns		1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	NEGATIVE EDGE	0 Cel	TIN	QUAD	1300 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = OV WITH VEE = -4.2V TO -5.7V; SISO OPERATION ALSO AVAILABLE	e3		260	11.505 mm	10E
100336PC	Onsemi	PARALLEL IN SERIAL OUT	OTHER	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		ECL		4					IN-LINE		2 ns		2.54 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	300 MHz	R-PDIP-T24			5.08 mm	10.16 mm		COMPLEMENTARY			CAN ALSO BE OPERATED AS A COUNTER				30.585 mm	100K
100336SCX	Onsemi	PARALLEL IN SERIAL OUT	OTHER	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		ECL		4					SMALL OUTLINE		1.8 ns		1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		DUAL	350 MHz	R-PDSO-G24			2.65 mm	7.5 mm		COMPLEMENTARY			CAN ALSO BE OPERATED AS A COUNTER				15.4 mm	100K
MC10E446FNR2G	Onsemi	PARALLEL IN SERIAL OUT	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		4		5			CHIP CARRIER		1.48 ns		1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	NEGATIVE EDGE	0 Cel	TIN	QUAD	1300 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = OV WITH VEE = -4.2V TO -5.7V; SISO OPERATION ALSO AVAILABLE	e3		260	11.505 mm	10E
MC10EP446FA	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.025 ns		.8 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN LEAD	QUAD	3200 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	7 mm	10E
MC10EP446FAR2	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.025 ns		.8 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN LEAD	QUAD	3200 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	7 mm	10E
100336QC	Onsemi	PARALLEL IN SERIAL OUT	OTHER	NO LEAD	28	QCCN	SQUARE	PLASTIC/EPOXY	YES	1		ECL		4					CHIP CARRIER		1.8 ns		1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	0 Cel		QUAD	350 MHz	S-PQCC-N28			4.57 mm	11.43 mm		COMPLEMENTARY			CAN ALSO BE OPERATED AS A COUNTER				11.43 mm	100K
MC100EP446FAR2	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	1		ECL		8		3.3			FLATPACK, LOW PROFILE		1.025 ns		.8 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel	TIN LEAD	QUAD	3200 MHz	S-PQFP-G32	2	5.5 V	1.6 mm	7 mm	Not Qualified	COMPLEMENTARY	3 V		ECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	7 mm	100E
100336QI	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	NO LEAD	28	QCCN	SQUARE	PLASTIC/EPOXY	YES	1		ECL		4					CHIP CARRIER		1.8 ns		1.27 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		QUAD	350 MHz	S-PQCC-N28			4.57 mm	11.43 mm		COMPLEMENTARY			CAN ALSO BE OPERATED AS A COUNTER				11.43 mm	100K
NLV74HC165ADR2G	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS	AEC-Q100	8		3	2/6		SMALL OUTLINE	SOP16,.25	225 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	MATTE TIN	DUAL		R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e3	30	260	9.9 mm	HC/UH
SN74LS165NG	Onsemi	PARALLEL IN SERIAL OUT	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL		8		5			IN-LINE		40 ns		2.54 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel		DUAL	25 MHz	R-PDIP-T16		5.25 V	4.44 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V		CLOCK INHIBIT		NOT SPECIFIED	NOT SPECIFIED	19.175 mm	LS
MC74HC165AFELG	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8		3	2/6		SMALL OUTLINE	SOP16,.3	225 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	3	6 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	10.2 mm	HC/UH
MC14014BDR2	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		5	5/15		SMALL OUTLINE	SOP16,.25	800 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	4 MHz	R-PDSO-G16		18 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V		OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER	e0		235	9.9 mm	4000/14000/40000
MC74HC589ADR2	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		3	2/6		SMALL OUTLINE	SOP16,.25	275 ns	Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	24 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V			e0		235	9.9 mm	HC/UH
MC14014BFEL	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1500000 Hz	CMOS		8		5	5/15		SMALL OUTLINE	SOP16,.3	800 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	4 MHz	R-PDSO-G16		18 V	2.05 mm	5.275 mm	Not Qualified	TRUE	3 V		OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER	e4		260	10.2 mm	4000/14000/40000
SN74LS166M	Onsemi	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	25000000 Hz	TTL		8		5	5		SMALL OUTLINE	SOP16,.3	35 ns	Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	25 MHz	R-PDSO-G16	1	5.25 V	2.05 mm	5.275 mm	Not Qualified	TRUE	4.75 V			e4			10.2 mm	LS
MC14021BF	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1500000 Hz	CMOS		8		5	5/15		SMALL OUTLINE	SOP16,.3	800 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	4 MHz	R-PDSO-G16	3	18 V	2.05 mm	5.275 mm	Not Qualified	TRUE	3 V		OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER	e4		260	10.2 mm	4000/14000/40000
MC74HC165ANG	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	12000000 Hz	CMOS		8		3	2/6		IN-LINE	DIP16,.3	225 ns	Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	Tin (Sn)	DUAL	24 MHz	R-PDIP-T16		6 V	4.44 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V			e3	40	260	19.175 mm	HC/UH
SN74LS165DR2	Onsemi	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	25000000 Hz	TTL		8		5	5		SMALL OUTLINE	SOP16,.25	40 ns	Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	TIN LEAD	DUAL	25 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V		CLOCK INHIBIT	e0		235	9.9 mm	LS
MC74HC589ADT	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		3	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	275 ns	Shift Registers	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4		260	5 mm	HC/UH
MC74HC589AD	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		3	2/6		SMALL OUTLINE	SOP16,.25	275 ns	Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V			e0		235	9.9 mm	HC/UH
SN74LS166D	Onsemi	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	25000000 Hz	TTL		8		5	5		SMALL OUTLINE	SOP16,.25	35 ns	Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	TIN LEAD	DUAL	25 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V			e0		235	9.9 mm	LS
MM74HC589SJ	Onsemi	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		4.5			SMALL OUTLINE		280 ns		1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL	28 MHz	R-PDSO-G16	1	6 V	2.1 mm	5.3 mm	Not Qualified	TRUE	2 V			e3			10.2 mm	HC/UH
MC74HC165AD	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8		3	2/6		SMALL OUTLINE	SOP16,.25	225 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e0		235	9.9 mm	HC/UH
MC14021BDR2	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		5	5/15		SMALL OUTLINE	SOP16,.25	800 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	Tin/Lead (Sn85Pb15)	DUAL	4 MHz	R-PDSO-G16		18 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V		OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER	e0	30	235	9.9 mm	4000/14000/40000
CD4021BCMX	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	2.5 Hz	CMOS		8	TR	5		50 pF	SMALL OUTLINE	SOP16,.25	350 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel		DUAL	2.5 MHz	R-PDSO-G16		15 V	1.753 mm	3.9 mm		TRUE	3 V	.6 mA					9.9 mm	4000/14000/40000
MC74HC165ADR2	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8		3	2/6		SMALL OUTLINE	SOP16,.25	225 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e0		235	9.9 mm	HC/UH
MC14014BFR2	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1500000 Hz	CMOS		8		5	5/15		SMALL OUTLINE	SOP16,.3	800 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	4 MHz	R-PDSO-G16		18 V	2.05 mm	5.275 mm	Not Qualified	TRUE	3 V		OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER	e0			10.2 mm	4000/14000/40000
MC74HC165AFG	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8		3	2/6		SMALL OUTLINE	SOP16,.3	225 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	3	6 V	2.05 mm	5.275 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	10.2 mm	HC/UH
MC74HC589AFELG	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8		3	2/6		SMALL OUTLINE	SOP16,.3	275 ns	Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16		6 V	2.05 mm	5.275 mm	Not Qualified	TRUE	2 V			e4		260	10.2 mm	HC/UH
MC74HC589AFEL	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8		3	2/6		SMALL OUTLINE	SOP16,.3	275 ns	Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	3	6 V	2.05 mm	5.275 mm	Not Qualified	TRUE	2 V			e4		260	10.2 mm	HC/UH
SN74LS165D	Onsemi	PARALLEL IN SERIAL OUT	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	25000000 Hz	TTL		8		5	5		SMALL OUTLINE	SOP16,.25	40 ns	Shift Registers	1.27 mm	70 Cel	RIGHT		POSITIVE EDGE	0 Cel	TIN LEAD	DUAL	25 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V		CLOCK INHIBIT	e0		235	9.9 mm	LS
MC14014BF	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1500000 Hz	CMOS		8		5	5/15		SMALL OUTLINE	SOP16,.3	800 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	4 MHz	R-PDSO-G16		18 V	2.05 mm	5.275 mm	Not Qualified	TRUE	3 V		OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER	e4		260	10.2 mm	4000/14000/40000
MC14021BFR2	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1500000 Hz	CMOS		8		5	5/15		SMALL OUTLINE	SOP16,.3	800 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL	4 MHz	R-PDSO-G16		18 V	2.05 mm	5.275 mm	Not Qualified	TRUE	3 V		OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER	e0			10.2 mm	4000/14000/40000
MC14021BFEL	Onsemi	PARALLEL IN SERIAL OUT	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	1500000 Hz	CMOS		8		5	5/15		SMALL OUTLINE	SOP16,.3	800 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	4 MHz	R-PDSO-G16	3	18 V	2.05 mm	5.275 mm	Not Qualified	TRUE	3 V		OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER	e4		260	10.2 mm	4000/14000/40000

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.