NXP Semiconductors Digital Shift Registers 1,471

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
74LV595PW-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	77 ns	Shift Registers	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4		260	5 mm	LV/LV-A/LVX/H
NPIC6C4894DY	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		12	5			SMALL OUTLINE				1.27 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel		DUAL	10 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm		TRUE	4.5 V					12.8 mm	NPIC
74HC594N	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	20000000 Hz	CMOS		8	5	2/6		IN-LINE	DIP16,.3	225 ns	Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDIP-T16		6 V	4.2 mm	7.62 mm	Not Qualified	TRUE	2 V	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4			19.025 mm	HC/UH
74LV595PW	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	77 ns	Shift Registers	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	30	260	5 mm	LV/LV-A/LVX/H
74HC4015D	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		4	5		50 pF	SMALL OUTLINE		53 ns			125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	6 V			Not Qualified	TRUE	2 V	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER	e4				HC/UH
74HCT7731PW	NXP Semiconductors	SERIAL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	4		CMOS		64	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V	INDIVIDUAL CLOCK FOR EACH SHIFT REGISTER				5 mm	HCT
74HC7731D,118	NXP Semiconductors	SERIAL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4		CMOS		64	5		50 pF	SMALL OUTLINE		46 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	INDIVIDUAL CLOCK FOR EACH SHIFT REGISTER	e4			9.9 mm	HC/UH
HEF4014BP,652	NXP Semiconductors	PARALLEL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8	5	5/15	50 pF	IN-LINE	DIP16,.3	260 ns	Shift Registers	2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	6 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	TRUE	3 V	OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER	e4			21.6 mm	4000/14000/40000
HEF4031BTD-T	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		64	5		50 pF	SMALL OUTLINE		380 ns		1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	2.5 MHz	R-PDSO-G16		15 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	DELAYED BUFFERED CLOCK OUTPUT FOR CASCADING				9.9 mm	4000/14000/40000
74VHCT595PW-Q100	NXP Semiconductors	SERIAL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		12 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm		TRUE	4.5 V					5 mm	AHCT/VHCT/VT
74HCT4015PW-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		4	5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		53 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER				5 mm	HCT
74AHC594PW-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		15.1 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	70 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm		TRUE	2 V					5 mm	AHC/VHC/H/U/V
HEF40194BP	NXP Semiconductors	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	6000000 Hz	CMOS		4	5	5/15	50 pF	IN-LINE	DIP16,.3	205 ns	Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		DUAL	6 MHz	R-PDIP-T16	1	15 V	4.7 mm	7.62 mm	Not Qualified	TRUE	3 V	HOLD MODE				21.6 mm	4000/14000/40000
74HCT165D/T3	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		51 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	17 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V	CLOCK INHIBIT	e4			5 mm	HCT
74LV165N	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	20000000 Hz	CMOS		8	3.3	3.3	50 pF	IN-LINE	DIP16,.3	90 ns	Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	78 MHz	R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	1 V	CLOCK INHIBIT	e4			19.025 mm	LV/LV-A/LVX/H
74HC4094N	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	24000000 Hz	CMOS		8	5	2/6	50 pF	IN-LINE	DIP16,.3	295 ns	Shift Registers	2.54 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDIP-T16		6 V	4.2 mm	7.62 mm	Not Qualified	TRUE	2 V	PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT	e4			19.025 mm	HC/UH
74HCT166PW	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		60 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	17 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V	CLOCK INHIBIT				5 mm	HCT
74AHCT594DB-Q100J	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, SHRINK PITCH		11 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	70 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm		TRUE	4.5 V					6.2 mm	AHCT/VHCT/VT
NPIC6C4894D-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	12	5			SMALL OUTLINE				1.27 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel		DUAL	10 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm		TRUE	4.5 V					12.8 mm	NPIC
74HCT164BQ-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		54 ns		.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		QUAD	18 MHz	R-PQCC-N14		5.5 V	1 mm	2.5 mm		TRUE	4.5 V					3 mm	HCT
HEF4015BPB	NXP Semiconductors	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS		4	5		50 pF	IN-LINE		260 ns		2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	7 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	TRUE	3 V	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER				21.6 mm	4000/14000/40000
HEF4006BP	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4	9000000 Hz	CMOS		5	5	5/15	50 pF	IN-LINE	DIP14,.3	180 ns	Shift Registers	2.54 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel		DUAL	9 MHz	R-PDIP-T14		15 V	4.2 mm	7.62 mm	Not Qualified	TRUE	3 V	SHARED CLOCK BETWEEN 4 SHIFT REGISTERS; TWO 4 BIT & TWO 5 BIT SHIFT REGISTERS				19.025 mm	4000/14000/40000
74HCT165BQ-Q100	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		51 ns		.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		QUAD	17 MHz	R-PQCC-N16	1	5.5 V	1 mm	2.5 mm		COMPLEMENTARY	4.5 V					3.5 mm	HCT
74HC5974N	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8	5			IN-LINE		265 ns		2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDIP-T16		6 V	4.2 mm	7.62 mm		TRUE	2 V					19.025 mm	HC/UH
74AHCT164BQ,115	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	14	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	65000000 Hz	CMOS		8	5	5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1X.12,20	14 ns	Shift Registers	.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	85 MHz	R-PQCC-N14	1	5.5 V	1 mm	2.5 mm	Not Qualified	TRUE	4.5 V		e4	30	260	3 mm	AHCT/VHCT/VT
74HCT195D-T	NXP Semiconductors	PARALLEL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	5		50 pF	SMALL OUTLINE		48 ns			125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	18 MHz	R-PDSO-G16		5.5 V			Not Qualified	TRUE	4.5 V	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT					HCT
74HCT166PW-T	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		60 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	17 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V	CLOCK INHIBIT				5 mm	HCT
74HC4094PW	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8	5	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	295 ns	Shift Registers	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V	UNLATCHED SERIAL SHIFT RIGHT OUTPUT; PARALLEL OUTPUT IS LATCHED	e4	30	260	5 mm	HC/UH
74HCT597D-T	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5		50 pF	SMALL OUTLINE		60 ns			125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	5.5 V			Not Qualified	TRUE	4.5 V		e4				HCT
74AHCT164D-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	65000000 Hz	CMOS		8	5	5		SMALL OUTLINE	SOP14,.25	14 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	85 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		e4			8.65 mm	AHCT/VHCT/VT
74HC166D,652	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	45 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	6 V			Not Qualified	TRUE	2 V	CLOCK INHIBIT	e4	30	260		HC/UH
74HCT165BQ-Q100,11	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS	AEC-Q100	8	5	5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.1X.14,20	51 ns	Shift Registers	.5 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		QUAD	17 MHz	R-PQCC-N16		5.5 V	1 mm	2.5 mm	Not Qualified	COMPLEMENTARY	4.5 V					3.5 mm	HCT
74HCT164PW-Q100J	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	18000000 Hz	CMOS	AEC-Q100	8	5	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	54 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	18 MHz	R-PDSO-G14		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V					5 mm	HCT
74AHC595PW-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	90000000 Hz	CMOS		8	5	2/5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	20.1 ns	Shift Registers	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V		e4			5 mm	AHC/VHC/H/U/V
74LV165DB	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	90 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	78 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	1 V	CLOCK INHIBIT	e4	30	260	6.2 mm	LV/LV-A/LVX/H
74HC594D-Q100	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE		225 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm		TRUE	2 V					9.9 mm	HC/UH
74HCT7731D,112	NXP Semiconductors	SERIAL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4		CMOS		64	5	5	50 pF	SMALL OUTLINE	SOP16,.25	63 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	INDIVIDUAL CLOCK FOR EACH SHIFT REGISTER	e4	30	260	9.9 mm	HCT
HEF4031BPN	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		64	5		50 pF	IN-LINE		380 ns		2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	2.5 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V	DELAYED BUFFERED CLOCK OUTPUT FOR CASCADING				21.6 mm	4000/14000/40000
74HC597PW-T	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		53 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V		e4			5 mm	HC/UH
HEF4014BPN	NXP Semiconductors	PARALLEL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8	5	5/15	50 pF	IN-LINE	DIP16,.3	260 ns	Shift Registers	2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	6 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	TRUE	3 V	OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER		40	245	21.6 mm	4000/14000/40000
74LV165PW-Q100J	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		76 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	30 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm		COMPLEMENTARY	1 V					5 mm	LV/LV-A/LVX/H
74HC40104D	NXP Semiconductors	PARALLEL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	5		50 pF	SMALL OUTLINE		255 ns			125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	67 MHz	R-PDSO-G16		6 V			Not Qualified	TRUE	2 V						HC/UH
74HC166PW,112	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	45 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V	CLOCK INHIBIT	e4	30	260	5 mm	HC/UH
74HCT597D-Q100	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE		60 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm		TRUE	4.5 V					9.9 mm	HCT
74LV595DB	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	77 ns	Shift Registers	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	24 MHz	R-PDSO-G16	1	3.6 V	2 mm	5.3 mm	Not Qualified	TRUE	1 V	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4	30	260	6.2 mm	LV/LV-A/LVX/H
HEF4517BTD-T	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		64	5		50 pF	SMALL OUTLINE		440 ns		1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	2 MHz	R-PDSO-G16		15 V	2.65 mm	7.5 mm	Not Qualified	TRUE	3 V	OUTPUTS ALSO AVAILABLE AT 16TH, 32ND AND 48TH STAGE OF THE SHIFT REGISTER				10.3 mm	4000/14000/40000
74AHC164PW-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		20.5 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	85 MHz	R-PDSO-G14		5.5 V	1.1 mm	4.4 mm		TRUE	2 V					5 mm	AHC/VHC/H/U/V
74AHC164D-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE		20.5 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	85 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm		TRUE	2 V					8.65 mm	AHC/VHC/H/U/V

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.