NXP Semiconductors Digital Shift Registers 1,471

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
HEF4094BDF	NXP Semiconductors	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS		8	5		50 pF	IN-LINE		330 ns		2.54 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	5 MHz	R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT					4000/14000/40000
74AHCT595PW	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	90000000 Hz	CMOS		8	5	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	12 ns	Shift Registers	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V		e4	30	260	5 mm	AHCT/VHCT/VT
74LV164PW-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		49 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	30 MHz	R-PDSO-G14		5.5 V	1.1 mm	4.4 mm		TRUE	1 V					5 mm	LV/LV-A/LVX/H
74AHCT594DB,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5	5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	15.1 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		e4	30	260	6.2 mm	HCT
74LV164PW-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		49 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1 V		e4			5 mm	LV/LV-A/LVX/H
74HC594DB-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, SHRINK PITCH		225 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4			6.2 mm	HC/UH
74HCT40104DB	NXP Semiconductors	PARALLEL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	5			SMALL OUTLINE, SHRINK PITCH		51 ns		.65 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	57 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V					6.2 mm	HCT
74VHCT595D-Q100	NXP Semiconductors	SERIAL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE		12 ns		1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm		TRUE	4.5 V					9.9 mm	AHCT/VHCT/VT
74HCT597DB,112	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	60 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V		e4	30	260	6.2 mm	HCT
74HC7731D-T	NXP Semiconductors	SERIAL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4		CMOS		64	5		50 pF	SMALL OUTLINE		46 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	INDIVIDUAL CLOCK FOR EACH SHIFT REGISTER	e4			9.9 mm	HC/UH
74HC595D/T3	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE		265 ns		1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	SERIAL STANDARD OUTPUT FOR CASCADING	e4			9.9 mm	HC/UH
74HCT595BQ	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	5	5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.1X.14,20	63 ns	Shift Registers	.5 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	20 MHz	R-PQCC-N16	1	5.5 V	1 mm	2.5 mm	Not Qualified	TRUE	4.5 V	SERIAL STANDARD OUTPUT FOR CASCADING	e4	30	260	3.5 mm	HCT
74LV165DB,112	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	90 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	78 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	1 V	CLOCK INHIBIT	e4	30	260	6.2 mm	LV/LV-A/LVX/H
HEF4015BPN	NXP Semiconductors	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS		4	5		50 pF	IN-LINE		260 ns		2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	7 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	TRUE	3 V	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER		40	245	21.6 mm	4000/14000/40000
HEF4031BTD	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		64	5		50 pF	SMALL OUTLINE		380 ns		1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	2.5 MHz	R-PDSO-G16		15 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V	DELAYED BUFFERED CLOCK OUTPUT FOR CASCADING				9.9 mm	4000/14000/40000
74LVC595AD,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	SQUARE	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS		8	3.3	3.3		SMALL OUTLINE	SOP16,.25	18.2 ns	Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	115 MHz	S-PDSO-G16	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	1.2 V		e4	30	260	9.9 mm	LVC/LCX/Z
74LVC594APW,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS		8	3.3	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	18.2 ns	Shift Registers	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	115 MHz	R-PDSO-G16	1	3.6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	1.2 V		e4	30	260	5 mm	LVC/LCX/Z
HEF40194BDF	NXP Semiconductors	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS		4	5		50 pF	IN-LINE		205 ns		2.54 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		DUAL	6 MHz	R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	HOLD MODE					4000/14000/40000
HEF4035BDF	NXP Semiconductors	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS		4	5		50 pF	IN-LINE		340 ns		2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	5 MHz	R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	CONFIGURABLE	3 V	J AND KBAR SERIAL INPUT					4000/14000/40000
74HCT4015DB	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		4	5		50 pF	SMALL OUTLINE, SHRINK PITCH		53 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER				6.2 mm	HCT
74HCT7731D,118	NXP Semiconductors	SERIAL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4		CMOS		64	5		50 pF	SMALL OUTLINE		63 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	INDIVIDUAL CLOCK FOR EACH SHIFT REGISTER	e4			9.9 mm	HCT
HEF4031BDB	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS		64	5		50 pF	IN-LINE		380 ns		2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	2.5 MHz	R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V	DELAYED BUFFERED CLOCK OUTPUT FOR CASCADING					4000/14000/40000
74HC4094DB-Q100J	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5	2/6		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	295 ns	Shift Registers	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V					6.2 mm	HC/UH
74AHCT164PW-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		14 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	85 MHz	R-PDSO-G14		5.5 V	1.1 mm	4.4 mm		TRUE	4.5 V					5 mm	AHCT/VHCT/VT
74LV165DB-T	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	3.3		50 pF	SMALL OUTLINE, SHRINK PITCH		90 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	78 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	1 V	CLOCK INHIBIT	e4			6.2 mm	LV/LV-A/LVX/H
74HC597PW-Q100J	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		265 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G16		6 V	1.1 mm	4.4 mm		TRUE	2 V					5 mm	HC/UH
74HCT299PW-T	NXP Semiconductors	PARALLEL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	56 ns	Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	17 MHz	R-PDSO-G20	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e4			6.5 mm	HCT
74HCT299PW,112	NXP Semiconductors	PARALLEL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	56 ns	Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	17 MHz	R-PDSO-G20	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e4	30	260	6.5 mm	HCT
74HCT7731DB	NXP Semiconductors	SERIAL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	4		CMOS		64	5			SMALL OUTLINE, SHRINK PITCH				.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	INDIVIDUAL CLOCK FOR EACH SHIFT REGISTER				6.2 mm	HCT
74HC7597D-T	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5		50 pF	SMALL OUTLINE		265 ns			125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	107 MHz	R-PDSO-G16		6 V			Not Qualified	TRUE	2 V						HC/UH
74HC166DB	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		8	5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	45 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V	CLOCK INHIBIT	e4	30	260	6.2 mm	HC/UH
74HCT299D-T	NXP Semiconductors	PARALLEL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	5	5	50 pF	SMALL OUTLINE	SOP20,.4	56 ns	Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	17 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e4	30	260	12.8 mm	HCT
74HCT194PW-T	NXP Semiconductors	PARALLEL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		48 ns		.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V	HOLD MODE				5 mm	HCT
74HC166DB,118	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5		50 pF	SMALL OUTLINE, SHRINK PITCH		45 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V	CLOCK INHIBIT	e4	30	260	6.2 mm	HC/UH
HEF4015BP,652	NXP Semiconductors	SERIAL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	7000000 Hz	CMOS		4	5	5/15	50 pF	IN-LINE	DIP16,.3	260 ns	Shift Registers	2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	7 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	TRUE	3 V	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER	e4			21.6 mm	4000/14000/40000
74HCT195NB	NXP Semiconductors	PARALLEL IN PARALLEL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		4	5		50 pF	IN-LINE		48 ns		2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	18 MHz	R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	TRUE	4.5 V	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT				19.025 mm	HCT
74AHCT164D,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	65000000 Hz	CMOS		8	5	5		SMALL OUTLINE	SOP14,.25	14 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	85 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V		e4	30	260	8.65 mm	AHCT/VHCT/VT
74AHC164PW,118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	65000000 Hz	CMOS		8	5	2/5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	20.5 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	85 MHz	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V		e4	30	260	5 mm	AHC/VHC/H/U/V
74HC164PW-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		255 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G14		6 V	1.1 mm	4.4 mm		TRUE	2 V					5 mm	HC/UH
74HCT164N	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	22000000 Hz	CMOS		8	5	5	50 pF	IN-LINE	DIP14,.3	54 ns	Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	18 MHz	R-PDIP-T14		5.5 V	4.2 mm	7.62 mm	Not Qualified	TRUE	4.5 V		e4			19.025 mm	HCT
74LVC595AD,118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	SQUARE	PLASTIC/EPOXY	YES	1		CMOS		8	3.3			SMALL OUTLINE		18.2 ns		1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	115 MHz	S-PDSO-G16	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	1.2 V		e4			9.9 mm	LVC/LCX/Z
74HCT4015D,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS		4	5	5	50 pF	SMALL OUTLINE	SOP16,.25	53 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	5.5 V			Not Qualified	TRUE	4.5 V	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER	e4	30	260		HCT
74LV165PW-T	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	3.3		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		76 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	1 V	CLOCK INHIBIT	e4			5 mm	LV/LV-A/LVX/H
74HC40104DB-T	NXP Semiconductors	PARALLEL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4				SMALL OUTLINE, SHRINK PITCH		255 ns		.65 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	67 MHz	R-PDSO-G16		6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V					6.2 mm	HC/UH
74AHCT164PW-Q100J	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		14 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	85 MHz	R-PDSO-G14		5.5 V	1.1 mm	4.4 mm		TRUE	4.5 V					5 mm	AHCT/VHCT/VT
HEF4015BT,652	NXP Semiconductors	SERIAL IN PARALLEL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	7000000 Hz	CMOS		4	5	5/15	50 pF	SMALL OUTLINE	SOP16,.25	260 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	7 MHz	R-PDSO-G16	1	15 V	1.75 mm	3.9 mm	Not Qualified	TRUE	3 V	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER	e4	30	260	9.9 mm	4000/14000/40000
74HC166D/T3	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		45 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V	CLOCK INHIBIT				5 mm	HC/UH
74HC165D,118	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE		250 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm		COMPLEMENTARY	2 V	CLOCK INHIBIT				9.9 mm	HC/UH

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.