NXP Semiconductors Digital Shift Registers 1,471

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
HEF4517BT,652	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	2000000 Hz	CMOS		64	5	5/15		SMALL OUTLINE	SOP16,.25	440 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	8 MHz	R-PDSO-G16	2	15 V	2.65 mm	7.5 mm	Not Qualified	TRUE	3 V	OUTPUTS ALSO AVAILABLE AT 16TH, 32ND AND 48TH STAGE OF THE SHIFT REGISTER	e4	30	260	10.3 mm	4000/14000/40000
74HCT7597NB	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8	5		50 pF	IN-LINE		53 ns		2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDIP-T16		5.5 V	4.06 mm	7.62 mm	Not Qualified	TRUE	4.5 V					19.09 mm	HCT
HEF4731VP	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4	2250000 Hz	CMOS		64	5		50 pF	IN-LINE	DIP14,.3	230 ns	Shift Registers	2.54 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel		DUAL	2.25 MHz	R-PDIP-T14		12.5 V	4.2 mm	7.62 mm	Not Qualified	TRUE	4.5 V	INDIVIDUAL CLOCK FOR EACH SHIFT REGISTER				19.025 mm	4000/14000/40000
74HC166PW-Q100	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		225 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G16		6 V	1.1 mm	4.4 mm		TRUE	2 V					5 mm	HC/UH
74LVC594ABQ,115	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	3.3			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		18.2 ns		.5 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	115 MHz	R-PQCC-N16	1	3.6 V	1 mm	2.5 mm	Not Qualified	TRUE	1.2 V		e4	30	260	3.5 mm	LVC/LCX/Z
HEF4557BP	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	5000000 Hz	CMOS		64	5	5/15	50 pF	IN-LINE	DIP16,.3	480 ns	Shift Registers	2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	10 MHz	R-PDIP-T16		15 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V	VARIABLE LENGTH SHIFT REGISTER (1 TO 64 BITS); CLOCK INHIBIT BAR ALLOWS HL EXTERNAL CLOCK OPERATION	e4			19.025 mm	4000/14000/40000
74LV164DB-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	3.3		50 pF	SMALL OUTLINE, SHRINK PITCH		49 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	1 V		e4			6.2 mm	LV/LV-A/LVX/H
74LV165N,112	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	20000000 Hz	CMOS		8	3.3	3.3	50 pF	IN-LINE	DIP16,.3	90 ns	Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	78 MHz	R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	1 V	CLOCK INHIBIT	e4			19.025 mm	LV/LV-A/LVX/H
74HCT594N	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	20000000 Hz	CMOS		8	5	5		IN-LINE	DIP16,.3	48 ns	Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T16		5.5 V	4.2 mm	7.62 mm	Not Qualified	TRUE	4.5 V	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT	e4			19.025 mm	HCT
74AHCT164D-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE		14 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	85 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm		TRUE	4.5 V					8.65 mm	AHCT/VHCT/VT
HEF40194BD	NXP Semiconductors	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	6000000 Hz	CMOS		4	5	5/15	50 pF	IN-LINE	DIP16,.3	205 ns	Shift Registers	2.54 mm	85 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel		DUAL	6 MHz	R-GDIP-T16	1	15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	HOLD MODE			225		4000/14000/40000
HEF4517BT,653	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	2000000 Hz	CMOS		64	5	5/15		SMALL OUTLINE	SOP16,.25	440 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	8 MHz	R-PDSO-G16	2	15 V	2.65 mm	7.5 mm	Not Qualified	TRUE	3 V	OUTPUTS ALSO AVAILABLE AT 16TH, 32ND AND 48TH STAGE OF THE SHIFT REGISTER	e4	30	260	10.3 mm	4000/14000/40000
74HCT299D,652	NXP Semiconductors	PARALLEL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	5	5	50 pF	SMALL OUTLINE	SOP20,.4	56 ns	Shift Registers	1.27 mm	125 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	17 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL	e4	30	260	12.8 mm	HCT
HEF4094BT-Q100,118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE		330 ns		1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	14 MHz	R-PDSO-G16		15 V	1.75 mm	3.9 mm		TRUE	3 V					9.9 mm	4000/14000/40000
HEF4094BTT	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		330 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	14 MHz	R-PDSO-G16		15 V	1.1 mm	4.4 mm		TRUE	3 V			NOT SPECIFIED	NOT SPECIFIED	5 mm	4000/14000/40000
74HCT7731D	NXP Semiconductors	SERIAL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4		CMOS		64	5	5	50 pF	SMALL OUTLINE	SOP16,.25	63 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	INDIVIDUAL CLOCK FOR EACH SHIFT REGISTER	e4	30	260	9.9 mm	HCT
74HCT4094PW	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		65 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V	PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT				5 mm	HCT
74HC597N,652	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	20000000 Hz	CMOS		8	5	2/6	50 pF	IN-LINE	DIP16,.3	53 ns	Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T16		6 V	4.7 mm	7.62 mm	Not Qualified	TRUE	2 V		e4			21.6 mm	HC/UH
74LV165AD-Q100J	NXP Semiconductors	PARALLEL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	35000000 Hz	CMOS	AEC-Q100	8	2.5	3.3		SMALL OUTLINE	SOP16,.25	26 ns	Shift Registers	1.27 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V					9.9 mm	LV/LV-A/LVX/H
74AHC595PW-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		20.1 ns		.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm		TRUE	2 V		e4			5 mm	AHC/VHC/H/U/V
HEF4557BPN	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	5000000 Hz	CMOS		64	5	5/15	50 pF	IN-LINE	DIP16,.3	480 ns	Shift Registers	2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	2.5 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V	VARIABLE LENGTH SHIFT REGISTER (1 TO 64 BITS); CLOCK INHIBIT BAR ALLOWS HL EXTERNAL CLOCK OPERATION		40	245	21.6 mm	4000/14000/40000
HEF4006BD	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	4	9000000 Hz	CMOS		5	5	5/15	50 pF	IN-LINE	DIP14,.3	180 ns	Shift Registers	2.54 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel		DUAL	9 MHz	R-GDIP-T14		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	SHARED CLOCK BETWEEN 4 SHIFT REGISTERS; TWO 4 BIT & TWO 5 BIT SHIFT REGISTERS					4000/14000/40000
74HCT165PW	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	21000000 Hz	CMOS		8	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	51 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	17 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V	CLOCK INHIBIT	e4	30	260	5 mm	HCT
74HC7597D	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5		50 pF	SMALL OUTLINE		265 ns			125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	107 MHz	R-PDSO-G16		6 V			Not Qualified	TRUE	2 V						HC/UH
74HC164DB-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5		50 pF	SMALL OUTLINE, SHRINK PITCH		255 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G14	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		e4			6.2 mm	HC/UH
74HC4094D-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE		295 ns		1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm		TRUE	2 V					9.9 mm	HC/UH
74HC165NB	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8	5		50 pF	IN-LINE		50 ns		2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDIP-T16		6 V	4.2 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V	CLOCK INHIBIT				19.025 mm	HC/UH
HEF4517BT,512	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	2000000 Hz	CMOS		64	5	5/15	50 pF	SMALL OUTLINE	SOP16,.4	440 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	2 MHz	R-PDSO-G16	2	15 V	2.65 mm	7.5 mm	Not Qualified	TRUE	3 V	OUTPUTS ALSO AVAILABLE AT 16TH, 32ND AND 48TH STAGE OF THE SHIFT REGISTER	e4	30	260	10.3 mm	4000/14000/40000
74LV165D,118	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS		8	3.3	3.3	50 pF	SMALL OUTLINE	SOP16,.25	90 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	78 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	1 V	CLOCK INHIBIT	e4	30	260	9.9 mm	LV/LV-A/LVX/H
HEF40195BDF	NXP Semiconductors	PARALLEL IN PARALLEL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS		4	5		50 pF	IN-LINE		255 ns		2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	5 MHz	R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V	J AND KBAR SERIAL INPUT					4000/14000/40000
HEF4731VDF	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	4		CMOS		64	5		50 pF	IN-LINE		230 ns		2.54 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel		DUAL	2.25 MHz	R-GDIP-T14		12.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	INDIVIDUAL CLOCK FOR EACH SHIFT REGISTER					4000/14000/40000
74LV164D-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	3.3			SMALL OUTLINE		49 ns		1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	30 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.9 mm		TRUE	1 V					8.65 mm	LV/LV-A/LVX/H
74HC166N	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	24000000 Hz	CMOS		8	5	2/6	50 pF	IN-LINE	DIP16,.3	45 ns	Shift Registers	2.54 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDIP-T16		6 V	4.7 mm	7.62 mm	Not Qualified	TRUE	2 V	CLOCK INHIBIT	e4			21.6 mm	HC/UH
NPIC6C595BQ-Q100	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1			AEC-Q100	8	5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				.5 mm	125 Cel	RIGHT	OPEN-DRAIN	POSITIVE EDGE	-40 Cel		QUAD		R-PQCC-N16	1	5.5 V	1 mm	2.5 mm		TRUE	4.5 V					3.5 mm	NPIC
74VHC595D-Q100J	NXP Semiconductors	SERIAL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	8	5			SMALL OUTLINE		20.1 ns		1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm		TRUE	2 V					9.9 mm	AHC/VHC/H/U/V
HEF4031BP	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	2500000 Hz	CMOS		64	5	5/15	50 pF	IN-LINE	DIP16,.3	380 ns	Shift Registers	2.54 mm	85 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	2.5 MHz	R-PDIP-T16		15 V	4.7 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V	DELAYED BUFFERED CLOCK OUTPUT FOR CASCADING				21.6 mm	4000/14000/40000
74AHCT595D-Q100,11	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	90000000 Hz	CMOS	AEC-Q100	8	5	5		SMALL OUTLINE	SOP16,.25	12 ns	Shift Registers	1.27 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V					9.9 mm	AHCT/VHCT/VT
74HCT597PW	NXP Semiconductors	PARALLEL IN SERIAL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5		50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		60 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V					5 mm	HCT
74HC194DB,112	NXP Semiconductors	PARALLEL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS		4	5	2/6	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	44 ns	Shift Registers	.65 mm	125 Cel	BIDIRECTIONAL		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	20 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V	HOLD MODE	e4	30	260	6.2 mm	HC/UH
74AHCT595PW,112	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	90000000 Hz	CMOS		8	5	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	12 ns	Shift Registers	.65 mm	125 Cel	RIGHT	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	4.5 V		e4	30	260	5 mm	AHCT/VHCT/VT
74AHC164D,118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	65000000 Hz	CMOS		8	5	2/5.5		SMALL OUTLINE	SOP14,.25	20.5 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	85 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		e4	30	260	8.65 mm	AHC/VHC/H/U/V
74AHC164D-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	65000000 Hz	CMOS		8	5	2/5.5		SMALL OUTLINE	SOP14,.25	20.5 ns	Shift Registers	1.27 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	85 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		e4			8.65 mm	AHC/VHC/H/U/V
74HC195DB	NXP Semiconductors	PARALLEL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4	5		50 pF	SMALL OUTLINE, SHRINK PITCH		45 ns		.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V	COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT				6.2 mm	HC/UH
74AHC594DB,118	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5	5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	15.1 ns	Shift Registers	.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	90 MHz	R-PDSO-G16	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		e4	30	260	6.2 mm	HC/UH
74HC594PW	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8	5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				.65 mm	125 Cel	RIGHT		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G16		6 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V	PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT				5 mm	HC/UH
74HCT4015D-T	NXP Semiconductors	SERIAL IN PARALLEL OUT	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		4	5		50 pF	SMALL OUTLINE		53 ns			125 Cel	RIGHT		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	20 MHz	R-PDSO-G16	1	5.5 V			Not Qualified	TRUE	4.5 V	INDIVIDUAL CLOCK & CLEAR FOR EACH SHIFT REGISTER	e4				HCT
HEF4731VD	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	4	2250000 Hz	CMOS		64	5		50 pF	IN-LINE	DIP14,.3	230 ns	Shift Registers	2.54 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel		DUAL	2.25 MHz	R-GDIP-T14		12.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	INDIVIDUAL CLOCK FOR EACH SHIFT REGISTER					4000/14000/40000
HEF4731VPN	NXP Semiconductors	SERIAL IN SERIAL OUT	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4		CMOS		64	5		50 pF	IN-LINE		230 ns		2.54 mm	85 Cel	RIGHT		NEGATIVE EDGE	-40 Cel		DUAL	2.25 MHz	R-PDIP-T14		12.5 V	4.2 mm	7.62 mm	Not Qualified	TRUE	4.5 V	INDIVIDUAL CLOCK FOR EACH SHIFT REGISTER				19.025 mm	4000/14000/40000

Digital Shift Registers

Digital shift registers are electronic circuits that can store and shift data in a serial-in, serial-out (SISO) or parallel-in, serial-out (PISO) fashion. They are commonly used in digital systems for data storage, data transfer, and signal processing applications.

Shift registers can be designed using various types of flip-flops, such as D flip-flops, JK flip-flops, and T flip-flops. They can also be designed using various technologies, including transistor-transistor logic (TTL), complementary metal-oxide-semiconductor (CMOS), and field-programmable gate arrays (FPGAs).

Digital shift registers can be classified into various types based on their operation mode and the direction of data shift. The most common types of shift registers include:

1. Serial-in, serial-out (SISO) shift registers: These shift registers have one serial input and one serial output. They can shift data in one direction, either left or right, and can be used for data storage, delay generation, and signal processing applications.

2. Parallel-in, serial-out (PISO) shift registers: These shift registers have multiple parallel inputs and one serial output. They can shift data from multiple inputs to a single output in a serial fashion and can be used for data transfer and signal processing applications.

3. Serial-in, parallel-out (SIPO) shift registers: These shift registers have one serial input and multiple parallel outputs. They can shift data from a single input to multiple outputs in a parallel fashion and can be used for data storage and signal processing applications.

4. Parallel-in, parallel-out (PIPO) shift registers: These shift registers have multiple parallel inputs and multiple parallel outputs. They can shift data from multiple inputs to multiple outputs in a parallel fashion and can be used for data transfer and signal processing applications.

Digital shift registers are used in various applications, including serial-to-parallel conversion, parallel-to-serial conversion, data storage, data transfer, and signal processing. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.