QCCJ Latches & Flip-Flops 442

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MC100E143FNR2	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	9	5			CHIP CARRIER		1 ns			1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	100E
MC100E150FNG	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	6	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.8 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD	900 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	72 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	100E
MC100E151FNG	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL	6	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.9 ns		FF/Latches	1.27 mm	85 Cel	OPEN-EMITTER	POSITIVE EDGE	0 Cel	MATTE TIN	QUAD	900 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	90 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	11.505 mm	100E
MC100E143FNR2G	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	9	5			CHIP CARRIER		1 ns			1.27 mm	85 Cel		POSITIVE EDGE	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	100E
SN74AS373FN	Texas Instruments	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	8	5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel	3-STATE		0 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74ALS74FN3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2	34000000 Hz	TTL		5	5		CHIP CARRIER	LDCC20,.4SQ		8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20								4 mA
SN74AS534FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		TTL		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74AS74FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74HC173FN3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	4		CMOS			2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20
SN74S268FN	Texas Instruments	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	6	5		15 pF	CHIP CARRIER	LDCC20,.4SQ	18 ns		FF/Latches	1.27 mm	70 Cel	3-STATE	HIGH LEVEL	0 Cel		QUAD		S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	119 mA			NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	S
SN74ALS580FN	Texas Instruments	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	8	5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel	3-STATE		0 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74AS573FN3	Texas Instruments	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	8	5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel	3-STATE		0 Cel		QUAD		S-PQCC-J20
SN74HC112FN3	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		CMOS			2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		QUAD		S-PQCC-J20											NOT SPECIFIED	NOT SPECIFIED
SN74LS171FN3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	4		TTL					CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20
SN74AS174FN3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	6		TTL					CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20
SN74HCT564FN	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		CMOS		5	5		CHIP CARRIER	LDCC20,.4SQ		6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74ALS112AFN	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE	0 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74AS114FN-00	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	2	5			CHIP CARRIER					1.27 mm	70 Cel		NEGATIVE EDGE	0 Cel		QUAD		S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.5 V		WITH INDIVIDUAL SET INPUTS				8.9662 mm	AS
SN74LS607FN3	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		TTL					CHIP CARRIER	LDCC28,.5SQ			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J28											NOT SPECIFIED	NOT SPECIFIED
SN74LS175FN3	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	4		TTL		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20											NOT SPECIFIED	NOT SPECIFIED
SN74LS174FN3	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	6		TTL		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20											NOT SPECIFIED	NOT SPECIFIED
SN74ALS74AFN3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2	34000000 Hz	TTL		5	5		CHIP CARRIER	LDCC20,.4SQ		8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20								4 mA
SN74S74FN3	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20											NOT SPECIFIED	NOT SPECIFIED
SN74AS580FN3	Texas Instruments	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	8	5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel	3-STATE		0 Cel		QUAD		S-PQCC-J20
SN74HC113FN	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		CMOS			2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74ALS575AFN3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		TTL		5	5		CHIP CARRIER	LDCC28,.5SQ			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J28
SN74ALS174FN-00	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	6	5		50 pF	CHIP CARRIER		17 ns			1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD	50 MHz	S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.5 V	19 mA					8.9662 mm	ALS
SN74LS112AFN3	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE	0 Cel		QUAD		S-PQCC-J20
SN74HC379FN3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	4		CMOS					CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20
SN74ALS576FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		TTL		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74ALS74AFN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74ALS259FN-00	Texas Instruments	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	1	5			CHIP CARRIER					1.27 mm	70 Cel		LOW LEVEL	0 Cel		QUAD		S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.5 V		1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH				8.9662 mm	ALS
SN74AS174FN-00	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	6	5		50 pF	CHIP CARRIER		10 ns			1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD	100 MHz	S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.5 V	45 mA					8.9662 mm	AS
SN74AS114FN3	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL					CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE	0 Cel		QUAD		S-PQCC-J20											NOT SPECIFIED	NOT SPECIFIED
SN74LS175FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	4	5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	25 ns		FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.75 V	18 mA			NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74HC377FN	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		CMOS			2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74ALS29842FN	Texas Instruments	D LATCH	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	10	5	5		CHIP CARRIER	LDCC28,.5SQ		48 Amp	FF/Latches	1.27 mm	70 Cel	3-STATE		0 Cel		QUAD		S-PQCC-J28					Not Qualified			85 mA
SN74ALS109AFN3	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20
SN74HCT573FN	Texas Instruments	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		CMOS	8	5	5		CHIP CARRIER	LDCC20,.4SQ		6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74ALS259FN	Texas Instruments	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	8	5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel			0 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74S113FN3	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE	0 Cel		QUAD		S-PQCC-J20
SN74LS107AFN	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL	2	5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	20 ns		FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.75 V	6 mA			NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74HC378FN3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	6		CMOS					CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20
SN74ALS534FN3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		TTL		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20
SN74S174FN3	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	6		TTL		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20											NOT SPECIFIED	NOT SPECIFIED
SN74ALS574FN3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		TTL		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20
SN74ALS874FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL		5	5		CHIP CARRIER	LDCC28,.5SQ			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J28					Not Qualified
SN74ALS876FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL		5	5		CHIP CARRIER	LDCC28,.5SQ			FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J28					Not Qualified

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.