QCCJ Latches & Flip-Flops 442

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Inputs	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
MC10E150FNR2G	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		6	TR	5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.8 ns	FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD	900 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	62 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC10E143FNG	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		9		5		CHIP CARRIER		1 ns		1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC10H175FNG	Onsemi	D LATCH	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		5	RAIL			CHIP CARRIER	LDCC20,.4SQ	2 ns	FF/Latches	1.27 mm	75 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD		S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	TRUE		107 mA		e3		260	8.965 mm	10H
MC10E431FN	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	3	1000000000 Hz	ECL		1		5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.85 ns	FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	1100 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	132 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC10E452FN	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		5		5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.85 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	1100 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC10H176FNR2G	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL		6	TR			CHIP CARRIER	LDCC20,.4SQ	2.2 ns	FF/Latches	1.27 mm	75 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	250 MHz	S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	TRUE		123 mA		e3		260	8.965 mm	10H
MC10133FN	Onsemi	D LATCH	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		ECL		2				CHIP CARRIER		6 ns		1.27 mm	85 Cel		OPEN-EMITTER	HIGH LEVEL	-30 Cel	TIN LEAD	QUAD		S-PQCC-J20			4.57 mm	8.9662 mm	Not Qualified	TRUE				e0			8.9662 mm	10K
MC10E154FNR2	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	2	5	TR	5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.8 ns	Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	91 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC100E431FNG	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	3	1000000000 Hz	ECL		1		5	-4.5	CHIP CARRIER	LDCC28,.5SQ	.85 ns	FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	Tin (Sn)	QUAD	1100 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	152 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	40	260	11.505 mm	100E
MC10H175FNR2G	Onsemi	D LATCH	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		5	TR			CHIP CARRIER	LDCC20,.4SQ	2 ns	FF/Latches	1.27 mm	75 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD		S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	TRUE		107 mA		e3		260	8.965 mm	10H
MC10E151FNR2G	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		6	TR	5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.9 ns	FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	900 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	78 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	11.505 mm	10E
MC10H175FNR2	Onsemi	D LATCH	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		5	TR			CHIP CARRIER	LDCC20,.4SQ	2 ns	FF/Latches	1.27 mm	75 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD		S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	TRUE		107 mA		e0		235	8.965 mm	10H
MC10E451FNR2	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		6	TR	5	-5.2	CHIP CARRIER	LDCC28,.5SQ	1.05 ns	FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	1100 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	101 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC10E175FNR2G	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		9	TR	5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.8 ns	FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28	3	5.5 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	132 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.5V	e3		260	11.505 mm	10E
MC10E143FNR2	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		9		5		CHIP CARRIER		1 ns		1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC10E167FNG	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1000000000 Hz	ECL	2	6		5	-5.2	CHIP CARRIER	LDCC28,.5SQ	1.05 ns	Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	1000 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	113 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC10H173FNR2	Onsemi	D LATCH	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	2	4	TR			CHIP CARRIER	LDCC20,.4SQ	3.7 ns	Multiplexer/Demultiplexers	1.27 mm	75 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	Tin/Lead (Sn80Pb20)	QUAD		S-PQCC-J20	1		4.57 mm	8.965 mm	Not Qualified	TRUE		73 mA	FOUR 2:1 MUX FOLLOWED BY LATCH	e0			8.965 mm	10H
MC10H186FNR2G	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL		6	TR			CHIP CARRIER	LDCC20,.4SQ	3 ns	FF/Latches	1.27 mm	75 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	250 MHz	S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	TRUE		121 mA	RESET ACTIVE ONLY WHEN CLOCK IS LOW	e3		260	8.965 mm	10H
MC100E175FNG	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		9		5	-4.5	CHIP CARRIER	LDCC28,.5SQ	.8 ns	FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28		5.5 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	152 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.5V	e3		260	11.505 mm	100E
MC100E256FN	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	4	3		5	-4.5	CHIP CARRIER	LDCC28,.5SQ	.8 ns	Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	Tin/Lead (Sn80Pb20)	QUAD		S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	96 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0			11.505 mm	100E
MC10E155FNR2	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	2	6	TR	5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.75 ns	Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	102 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC10E175FNR2	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		9	TR	5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.8 ns	FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.5 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	132 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.5V	e0		235	11.505 mm	10E
MC100E431FNR2	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	3	1000000000 Hz	ECL		1	TR	5	-4.5	CHIP CARRIER	LDCC28,.5SQ	.85 ns	FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	1100 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	152 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	100E
MC10153FN	Onsemi	D LATCH	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		ECL		2				CHIP CARRIER	LDCC20,.4SQ	5.6 ns	FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	-30 Cel	Tin/Lead (Sn80Pb20)	QUAD		S-PQCC-J20	1		4.57 mm	8.965 mm	Not Qualified	TRUE		83 mA		e0			8.965 mm	10K
MC10231FNR2	Onsemi	D FLIP-FLOP	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2	200000000 Hz	ECL		1	TR		-5.2	CHIP CARRIER	LDCC20,.4SQ	3.3 ns	FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-30 Cel	Tin/Lead (Sn80Pb20)	QUAD	200 MHz	S-PQCC-J20	1		4.57 mm	8.965 mm	Not Qualified	COMPLEMENTARY		72 mA		e0			8.965 mm	10K
MC10E154FNR2G	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	2	5	TR	5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.8 ns	Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	91 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC100E212FNR2	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		3		5	-4.5	CHIP CARRIER	LDCC28,.5SQ	1.025 ns	Other Logic ICs	1.27 mm	85 Cel			POSITIVE EDGE	0 Cel	TIN LEAD	QUAD		S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0			11.505 mm	100E
MC10131FNR2	Onsemi	D FLIP-FLOP	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2	125000000 Hz	ECL		1	TR		-5.2	CHIP CARRIER	LDCC20,.4SQ	4.5 ns	FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-30 Cel	TIN LEAD	QUAD	125 MHz	S-PQCC-J20	1		4.57 mm	8.965 mm	Not Qualified	COMPLEMENTARY		62 mA	WITH ADDITIONAL COMMON CLOCK	e0		235	8.965 mm	10K
MC10E156FNG	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	4	3		5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.8 ns	Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	90 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC10H130FN	Onsemi	D LATCH	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		2				CHIP CARRIER	LDCC20,.4SQ	1.7 ns	FF/Latches	1.27 mm	75 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD		S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	COMPLEMENTARY				e0		235	8.965 mm	10H
MC10E151FN	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		6		5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.9 ns	FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	900 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	78 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC10E150FNG	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		6		5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.8 ns	FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD	900 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	62 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC10135FNR2	Onsemi	JBAR-KBAR FLIP-FLOP	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	5200000 Hz	ECL		2	TR		-5.2	CHIP CARRIER	LDCC20,.4SQ	4.5 ns	FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	-30 Cel	TIN LEAD	QUAD	125 MHz	S-PQCC-J20	1		4.57 mm	8.965 mm	Not Qualified	COMPLEMENTARY		75 mA		e0		235	8.965 mm	10K
MC10E154FN	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	2	5		5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.8 ns	Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	91 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC100E452FNR2G	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		5		5	-4.5	CHIP CARRIER	LDCC28,.5SQ	.85 ns	Shift Registers	1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	1100 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	100E
MC10E212FNR2	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		3		5	-5.2	CHIP CARRIER	LDCC28,.5SQ	1.025 ns	Other Logic ICs	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD		S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC10H131FN	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL		2	RAIL			CHIP CARRIER	LDCC20,.4SQ	1.7 ns	FF/Latches	1.27 mm	75 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	Tin/Lead (Sn80Pb20)	QUAD	250 MHz	S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	COMPLEMENTARY		62 mA		e0	30	235	8.965 mm	10H
MC10H186FNG	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL		6				CHIP CARRIER	LDCC20,.4SQ	3 ns	FF/Latches	1.27 mm	75 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	250 MHz	S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	TRUE		121 mA	RESET ACTIVE ONLY WHEN CLOCK IS LOW	e3		260	8.965 mm	10H
MC10E143FNR2G	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		9		5		CHIP CARRIER		1 ns		1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	700 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	11.505 mm	10E
MC10E155FN	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	2	6		5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.75 ns	Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN LEAD	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	102 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC100E167FN	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1000000000 Hz	ECL	2	6		5	-4.5	CHIP CARRIER	LDCC28,.5SQ	1.05 ns	Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	1000 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	130 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	100E
MC10E131FNG	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1000000000 Hz	ECL		4		5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.675 ns	FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	MATTE TIN	QUAD	1100 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	70 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	11.505 mm	10E
MC10E151FNR2	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		6	TR	5	-5.2	CHIP CARRIER	LDCC28,.5SQ	.9 ns	FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	900 MHz	S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	78 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E
MC10H135FNR2G	Onsemi	JBAR-KBAR FLIP-FLOP	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL		2	TR			CHIP CARRIER	LDCC20,.4SQ	2.6 ns	FF/Latches	1.27 mm	75 Cel			POSITIVE EDGE	0 Cel	TIN	QUAD	250 MHz	S-PQCC-J20	3		4.57 mm	8.965 mm	Not Qualified	COMPLEMENTARY		75 mA		e3	30	260	8.965 mm	10H
MC10H131FNG	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL		2	RAIL			CHIP CARRIER	LDCC20,.4SQ	1.7 ns	FF/Latches	1.27 mm	75 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	MATTE TIN	QUAD	250 MHz	S-PQCC-J20	3		4.57 mm	8.965 mm	Not Qualified	COMPLEMENTARY		62 mA		e3	30	260	8.965 mm	10H
MC10H130FNR2G	Onsemi	D LATCH	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		2	TR			CHIP CARRIER	LDCC20,.4SQ	1.7 ns	FF/Latches	1.27 mm	75 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	TIN	QUAD		S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	COMPLEMENTARY				e3		260	8.965 mm	10H
MC100E256FNR2	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	4	3	TR	5	-4.5	CHIP CARRIER	LDCC28,.5SQ	.8 ns	Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	Tin/Lead (Sn80Pb20)	QUAD		S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	96 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0			11.505 mm	100E
MC10E167FNR2	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1000000000 Hz	ECL	2	6	TR	5	-5.2	CHIP CARRIER	LDCC28,.5SQ	1.05 ns	Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN LEAD	QUAD	1000 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	TRUE	4.2 V	113 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0		235	11.505 mm	10E

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.