QCCJ Latches & Flip-Flops 442

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Inputs	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74HC109FN3	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		CMOS					2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20											NOT SPECIFIED	NOT SPECIFIED
SN74HC74FN3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		CMOS					2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20
SN74LS109AFN3	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL				5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel			POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20
SN74HC175FN3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	4		CMOS					2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20
SN74S113FN	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL		2		5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	7 ns		FF/Latches	1.27 mm	70 Cel			NEGATIVE EDGE	0 Cel		QUAD	80 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.75 V	25 mA			NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	S
SN74ALS109FN-00	Texas Instruments	J-KBAR FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL		2		5		50 pF	CHIP CARRIER		18 ns			1.27 mm	70 Cel			POSITIVE EDGE	0 Cel		QUAD	34 MHz	S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.5 V	4 mA					8.9662 mm	ALS
SN74LS608FN3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		TTL							CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20											NOT SPECIFIED	NOT SPECIFIED
SN74LS379FN3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	4		TTL				5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel			POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20
SN74S112FN	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL		2		5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	7 ns		FF/Latches	1.27 mm	70 Cel			NEGATIVE EDGE	0 Cel		QUAD	80 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.75 V	25 mA			NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	S
SN74AS74FN3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL				5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel			POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20
SN74ALS175FN-00	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL		4		5		50 pF	CHIP CARRIER		17 ns			1.27 mm	70 Cel			POSITIVE EDGE	0 Cel		QUAD	50 MHz	S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.5 V	14 mA					8.9662 mm	ALS
SN74AS576FN	Texas Instruments	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL		8					CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		3-STATE		0 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74LS109AFN	Texas Instruments	J-KBAR FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL		2		5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	40 ns		FF/Latches	1.27 mm	70 Cel			POSITIVE EDGE	0 Cel		QUAD	25 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.75 V	8 mA			NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74HC112FN	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		CMOS					2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel			NEGATIVE EDGE	-40 Cel		QUAD		S-PQCC-J20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74ALS113AFN-00	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL		2		5		50 pF	CHIP CARRIER		19 ns			1.27 mm	70 Cel			NEGATIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.5 V	4.5 mA					8.9662 mm	ALS
SN74LS259BFN3	Texas Instruments	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL		8		5	5		CHIP CARRIER	LDCC20,.4SQ		8 Amp	FF/Latches	1.27 mm	70 Cel				0 Cel		QUAD		S-PQCC-J20								36 mA
SN74S374FN3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		TTL				5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20
SN74ALS109AFN	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL				5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel			POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74LS273FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL		8		5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	27 ns		FF/Latches	1.27 mm	70 Cel			POSITIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	27 mA			NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74HC174FN3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	6		CMOS					2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20
SN74HC259FN	Texas Instruments	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		CMOS		8			2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel				-40 Cel		QUAD		S-PQCC-J20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74AS113FN3	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL							CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel			NEGATIVE EDGE	0 Cel		QUAD		S-PQCC-J20											NOT SPECIFIED	NOT SPECIFIED
SN74AS112FN3	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL							CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel			NEGATIVE EDGE	0 Cel		QUAD		S-PQCC-J20											NOT SPECIFIED	NOT SPECIFIED
SN74LS113AFN3	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2	30000000 Hz	TTL				5	5		CHIP CARRIER	LDCC20,.4SQ		8 Amp	FF/Latches	1.27 mm	70 Cel			NEGATIVE EDGE	0 Cel		QUAD		S-PQCC-J20								6 mA
SN74HCT573FN3	Texas Instruments	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		CMOS		8		5	5		CHIP CARRIER	LDCC20,.4SQ		6 Amp	FF/Latches	1.27 mm	85 Cel		3-STATE		-40 Cel		QUAD		S-PQCC-J20
5962-01-365-1412	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL		8		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel				0 Cel		QUAD		S-PQCC-J20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74AS574FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8	90000000 Hz	TTL				5	5	50 pF	CHIP CARRIER	LDCC20,.4SQ		48 Amp	FF/Latches	1.27 mm	70 Cel		3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74HCT564FN3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		CMOS				5	5		CHIP CARRIER	LDCC20,.4SQ		6 Amp	FF/Latches	1.27 mm	85 Cel		3-STATE	POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20
SN74LS113AFN	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2	30000000 Hz	TTL		2		5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	20 ns	8 Amp	FF/Latches	1.27 mm	70 Cel			NEGATIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.75 V	6 mA			NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74ALS995FN	Texas Instruments	D LATCH	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL		10		5		50 pF	CHIP CARRIER	LDCC28,.5SQ	22 ns		FF/Latches	1.27 mm	70 Cel		3-STATE	HIGH LEVEL	0 Cel		QUAD		S-PQCC-J28		5.5 V	4.57 mm	11.5062 mm	Not Qualified	INVERTED	4.5 V	85 mA	WITH READ-BACK		NOT SPECIFIED	NOT SPECIFIED	11.5062 mm	ALS
SN74ALS577FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		TTL				5	5		CHIP CARRIER	LDCC28,.5SQ			FF/Latches	1.27 mm	70 Cel		3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J28					Not Qualified
SN74HC377FN3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		CMOS					2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20											NOT SPECIFIED	NOT SPECIFIED
SN74ALS873FN3	Texas Instruments	D LATCH	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL		4		5	5		CHIP CARRIER	LDCC28,.5SQ			FF/Latches	1.27 mm	70 Cel		3-STATE		0 Cel		QUAD		S-PQCC-J28
SN74ALS873FN	Texas Instruments	D LATCH	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL		4		5	5		CHIP CARRIER	LDCC28,.5SQ			FF/Latches	1.27 mm	70 Cel		3-STATE		0 Cel		QUAD		S-PQCC-J28					Not Qualified
SN74ALS273FN-00	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL		8		5		50 pF	CHIP CARRIER		15 ns			1.27 mm	70 Cel			POSITIVE EDGE	0 Cel		QUAD	35 MHz	S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.5 V	29 mA					8.9662 mm	ALS
100331QIX	Onsemi	D FLIP-FLOP	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	3		ECL		1	TR				CHIP CARRIER	LDCC28,.5SQ	1.8 ns			1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel		QUAD	400 MHz	S-PQCC-J28		-5.7 V	4.57 mm	11.43 mm		COMPLEMENTARY	-4.2 V		WITH ADDITIONAL COMMON CLOCK; SET AND RESET INPUTS				11.43 mm	100K
100331QI	Onsemi	D FLIP-FLOP	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	3		ECL		1					CHIP CARRIER	LDCC28,.5SQ	1.8 ns			1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel		QUAD	400 MHz	S-PQCC-J28		-5.7 V	4.57 mm	11.43 mm		COMPLEMENTARY	-4.2 V		WITH ADDITIONAL COMMON CLOCK; SET AND RESET INPUTS				11.43 mm	100K
100331QC	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	3		ECL		1					CHIP CARRIER	LDCC28,.5SQ	1.8 ns			1.27 mm	85 Cel			POSITIVE EDGE	0 Cel		QUAD	400 MHz	S-PQCC-J28		-5.7 V	4.57 mm	11.43 mm		COMPLEMENTARY	-4.2 V		WITH ADDITIONAL COMMON CLOCK; SET AND RESET INPUTS				11.43 mm	100K
100351QCX	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		6	TR				CHIP CARRIER	LDCC28,.5SQ	1.9 ns			1.27 mm	85 Cel			POSITIVE EDGE	0 Cel		QUAD	375 MHz	S-PQCC-J28			4.57 mm	11.43 mm		COMPLEMENTARY			WITH DUAL CLOCK				11.43 mm	100K
100351QC	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		6					CHIP CARRIER	LDCC28,.5SQ	1.9 ns			1.27 mm	85 Cel			POSITIVE EDGE	0 Cel		QUAD	375 MHz	S-PQCC-J28			4.57 mm	11.43 mm		COMPLEMENTARY			WITH DUAL CLOCK				11.43 mm	100K
100351QIX	Onsemi	D FLIP-FLOP	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		6	TR				CHIP CARRIER	LDCC28,.5SQ	1.9 ns			1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel		QUAD	375 MHz	S-PQCC-J28			4.57 mm	11.43 mm		COMPLEMENTARY			WITH DUAL CLOCK				11.43 mm	100K
100351QI	Onsemi	D FLIP-FLOP	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL		6					CHIP CARRIER	LDCC28,.5SQ	1.9 ns			1.27 mm	85 Cel			POSITIVE EDGE	-40 Cel		QUAD	375 MHz	S-PQCC-J28			4.57 mm	11.43 mm		COMPLEMENTARY			WITH DUAL CLOCK				11.43 mm	100K
100331QCX	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	3		ECL		1	TR				CHIP CARRIER	LDCC28,.5SQ	1.8 ns			1.27 mm	85 Cel			POSITIVE EDGE	0 Cel		QUAD	400 MHz	S-PQCC-J28		-5.7 V	4.57 mm	11.43 mm		COMPLEMENTARY	-4.2 V		WITH ADDITIONAL COMMON CLOCK; SET AND RESET INPUTS				11.43 mm	100K
MC10H135FNG	Onsemi	JBAR-KBAR FLIP-FLOP	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL		2	RAIL				CHIP CARRIER	LDCC20,.4SQ	2.6 ns		FF/Latches	1.27 mm	75 Cel			POSITIVE EDGE	0 Cel	TIN	QUAD		S-PQCC-J20	3		4.57 mm	8.965 mm	Not Qualified	COMPLEMENTARY		75 mA		e3	30	260	8.965 mm	10H
MC100E156FNR2	Onsemi	D LATCH	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		ECL	4	3	TR	5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.8 ns		Multiplexer/Demultiplexers	1.27 mm	85 Cel		OPEN-EMITTER	LOW LEVEL	0 Cel	Tin/Lead (Sn80Pb20)	QUAD	700 MHz	S-PQCC-J28	1	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	103 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e0			11.505 mm	100E
MC100E452FNG	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		5		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.85 ns		Shift Registers	1.27 mm	85 Cel	RIGHT	OPEN-EMITTER	POSITIVE EDGE	0 Cel	MATTE TIN	QUAD	1100 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	11.505 mm	100E
MC10E151FNG	Onsemi	D FLIP-FLOP	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	1100000000 Hz	ECL		6		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.9 ns		FF/Latches	1.27 mm	85 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	900 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	COMPLEMENTARY	4.2 V	78 mA	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3	30	260	11.505 mm	10E
MC10H176FNG	Onsemi	D FLIP-FLOP	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	250000000 Hz	ECL		6	RAIL				CHIP CARRIER	LDCC20,.4SQ	2.2 ns		FF/Latches	1.27 mm	75 Cel		OPEN-EMITTER	POSITIVE EDGE	0 Cel	TIN	QUAD	250 MHz	S-PQCC-J20			4.57 mm	8.965 mm	Not Qualified	TRUE		123 mA		e3		260	8.965 mm	10H

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.