SQUARE Latches & Flip-Flops 1,754

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Inputs	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
5962-87525022A	Texas Instruments	D FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	1	100000000 Hz	CMOS	38535Q/M;38534H;883B		4		5	5	50 pF	CHIP CARRIER	LCC20,.35SQ	10 ns	24 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel		QUAD	95 MHz	S-XQCC-N20		5.5 V			Not Qualified	TRUE	4.5 V		FOUR 2:1 MUX FOLLOWED BY REGISTER		NOT SPECIFIED	NOT SPECIFIED		ACT
SN74ALS994FN	Texas Instruments	D LATCH	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL			10		5	5	50 pF	CHIP CARRIER	LDCC28,.5SQ	27 ns		FF/Latches	1.27 mm	70 Cel	3-STATE	HIGH LEVEL	0 Cel		QUAD		S-PQCC-J28		5.5 V	4.57 mm	11.5062 mm	Not Qualified	TRUE	4.5 V	82 mA	WITH READ-BACK		NOT SPECIFIED	NOT SPECIFIED	11.5062 mm	ALS
SN74ALS534FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		TTL					5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20					Not Qualified
5962-9314801Q2A	Texas Instruments	D FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	1	150000000 Hz	BICMOS	MIL-PRF-38535 Class Q		8	TUBE	5	5	50 pF	CHIP CARRIER	LCC20,.35SQ	7.6 ns	48 Amp	FF/Latch	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	TIN LEAD	QUAD	150 MHz	S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Qualified	TRUE	4.5 V	30 mA	WITH HOLD MODE	e0			8.89 mm	ABT
JM38510/32504B2A	Texas Instruments	D FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	1		TTL	MIL-M-38510 Class B		8		5			CHIP CARRIER		27 ns			1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel		QUAD	30 MHz	S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	8.89 mm	LS
SN74AS74FN-00	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		TTL			1		5		50 pF	CHIP CARRIER		9 ns			1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD	105 MHz	S-PQCC-J20		5.5 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.5 V	16 mA					8.9662 mm	AS
SN74LS373FN3	Texas Instruments	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL			8		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel	3-STATE		0 Cel		QUAD		S-PQCC-J20
SN74HC107FHP4	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	2		CMOS						2/6		CHIP CARRIER	LCC20,.35SQ			FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		QUAD		S-XQCC-N20
5962-9758001Q2X	Texas Instruments	J-KBAR FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	2		TTL	MIL-PRF-38535 Class Q		2		5			CHIP CARRIER		10.5 ns			1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel		QUAD	70 MHz	S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Qualified	COMPLEMENTARY	4.5 V				NOT SPECIFIED	NOT SPECIFIED	8.89 mm	F/FAST
SN74HC273FN	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		CMOS						2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20					Not Qualified
5962-88741012X	Texas Instruments	D LATCH	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	1		TTL	MIL-STD-883		8		5			CHIP CARRIER		22 ns			1.27 mm	125 Cel		LOW LEVEL	-55 Cel	TIN LEAD	QUAD		S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Qualified	TRUE	4.5 V		1:8 DMUX FOLLOWED BY LATCH	e0			8.89 mm	ALS
SN74SSTV16859RGQR	Texas Instruments	D FLIP-FLOP	COMMERCIAL	NO LEAD	56	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1		CMOS			13		2.5	2.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC56,.31SQ,20	2.8 ns		Other Logic ICs	.5 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD	200 MHz	S-PQCC-N56	3	2.7 V	1 mm	8 mm	Not Qualified	TRUE	2.3 V				20	235	8 mm	SSTV
SN74HCT534FH	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	8		CMOS					5	5		CHIP CARRIER	LCC20,.35SQ		6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		QUAD		S-XQCC-N20					Not Qualified
SN74ALS259FN3	Texas Instruments	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL			8		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel			0 Cel		QUAD		S-PQCC-J20
SN74LS605FN3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		TTL								CHIP CARRIER	LDCC28,.5SQ			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J28											NOT SPECIFIED	NOT SPECIFIED
5962-9221503M2X	Texas Instruments	D FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	1		CMOS	MIL-STD-883		8		5		50 pF	CHIP CARRIER		8.3 ns	48 Amp		1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel		QUAD		S-CQCC-N20		5.5 V	1.905 mm	8.89 mm	Qualified	TRUE	4.5 V	16.8 mA			NOT SPECIFIED	NOT SPECIFIED	8.89 mm	FCT
SN74LS398FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL		2	4		5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	32 ns		Multiplexer/Demultiplexers	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.75 V	13 mA	FOUR 2:1 MUX FOLLOWED BY REGISTER		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74LS259BFN	Texas Instruments	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL			1		5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	24 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		LOW LEVEL	0 Cel		QUAD		S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	36 mA	1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74LS279AFN	Texas Instruments	R-S LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	4		TTL			2		5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	27 ns		FF/Latches	1.27 mm	70 Cel		LOW LEVEL	0 Cel		QUAD		S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	7 mA	WITH DUAL S INPUT FOR TWO FUNCTIONS		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74AUP1G80DSFR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	NO LEAD	6	VSON	SQUARE	PLASTIC/EPOXY	YES	1	260000000 Hz	CMOS			1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,14	28.7 ns	4 Amp	FF/Latches	.35 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	260 MHz	S-PDSO-N6	1	3.6 V	.4 mm	1 mm	Not Qualified	INVERTED	.8 V	.0009 mA		e4	NOT SPECIFIED	260	1 mm	AUP/ULP/V
SN74AUP1G79DPWR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BUTT	5	HVBCC	SQUARE	PLASTIC/EPOXY	YES	1		CMOS			1		1.2			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		24 ns	4 Amp			85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	BOTTOM	260 MHz	S-PBCC-B5	1	3.6 V	.4 mm	.8 mm		TRUE	.8 V	.0009 mA		e4	NOT SPECIFIED	NOT SPECIFIED	.8 mm	AUP/ULP/V
SN74ALS373FN	Texas Instruments	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL			8		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel	3-STATE		0 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74ALS374FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		TTL					5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20					Not Qualified
JM38510/65352B2A	Texas Instruments	D FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	2	18000000 Hz	CMOS	MIL-M-38510 Class B		1	TUBE	5		50 pF	CHIP CARRIER		42 ns	4 Amp		1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	TIN LEAD	QUAD	20 MHz	S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Not Qualified	COMPLEMENTARY	4.5 V	.04 mA		e0			8.89 mm	HCT
SN74HCT564FH	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	8		CMOS					5	5		CHIP CARRIER	LCC20,.35SQ		6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		QUAD		S-XQCC-N20					Not Qualified
SN74LS379FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL			4		5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	27 ns		FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	COMPLEMENTARY	4.75 V	15 mA	WITH HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74ALS175FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	4		TTL					5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74ALS575FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		TTL					5	5		CHIP CARRIER	LDCC28,.5SQ			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J28					Not Qualified
SN74LS399FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL		2	4		5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	32 ns		Multiplexer/Demultiplexers	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	13 mA	FOUR 2:1 MUX FOLLOWED BY REGISTER		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74AUP1G80DPWR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BUTT	5	HVBCC	SQUARE	PLASTIC/EPOXY	YES	1		CMOS			1		1.2			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		28.7 ns	4 Amp			85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	BOTTOM	260 MHz	S-PBCC-B5	1	3.6 V	.4 mm	.8 mm		INVERTED	.8 V	.0009 mA		e4	NOT SPECIFIED	NOT SPECIFIED	.8 mm	AUP/ULP/V
JM38510/30101	Texas Instruments	J-K FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	2		TTL			2		5			CHIP CARRIER		42 ns			1.27 mm	125 Cel		NEGATIVE EDGE	-55 Cel		QUAD	30 MHz	S-CQCC-N20		5.5 V	1.9 mm	8.885 mm	Not Qualified	COMPLEMENTARY	4.5 V						8.885 mm	LS
SN74LS279AFN3	Texas Instruments	R-S LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	4		TTL			1		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel			0 Cel		QUAD		S-PQCC-J20
SN74LS378FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL			6		5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	27 ns		FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	22 mA	WITH HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74HC114FN	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		CMOS						2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74LS377FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL			8		5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	27 ns		FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD	30 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	28 mA	WITH HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	LS
SN74AS174FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	6		TTL								CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74ALS564FN3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		TTL					5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20
SN74HC174FH	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	6		CMOS						2/6		CHIP CARRIER	LCC20,.35SQ			FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		QUAD		S-XQCC-N20					Not Qualified
SN74HC173FN	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	4		CMOS						2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74AUP1G79DSFR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	NO LEAD	6	VSON	SQUARE	PLASTIC/EPOXY	YES	1	220000000 Hz	CMOS			1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,14	24 ns	4 Amp	FF/Latches	.35 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	260 MHz	S-PDSO-N6	1	3.6 V	.4 mm	1 mm	Not Qualified	TRUE	.8 V	.0009 mA		e4	NOT SPECIFIED	260	1 mm	AUP/ULP/V
5962-8752501M2X	Texas Instruments	D FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	2		CMOS	MIL-PRF-38535		1		5			CHIP CARRIER		14 ns			1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel		QUAD	85 MHz	S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Qualified	COMPLEMENTARY	4.5 V				NOT SPECIFIED	NOT SPECIFIED	8.89 mm	ACT
5962-88534022A	Texas Instruments	J-KBAR FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	2	85000000 Hz	CMOS	MIL-PRF-38535		2		5	5	50 pF	CHIP CARRIER	LCC20,.35SQ	14 ns	24 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel		QUAD	85 MHz	S-CQCC-N20		5.5 V			Not Qualified	COMPLEMENTARY	4.5 V				NOT SPECIFIED	NOT SPECIFIED		ACT
SN74LS273FN3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		TTL					5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD		S-PQCC-J20
5962-89925012X	Texas Instruments	D FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	1		TTL	MIL-STD-883		6		5			CHIP CARRIER		42 ns				125 Cel		POSITIVE EDGE	-55 Cel		QUAD	30 MHz	S-CQCC-N20		5.5 V			Qualified	TRUE	4.5 V		WITH HOLD MODE					LS
JM38510/30106B2A	Texas Instruments	D FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	1	30000000 Hz	TTL	MIL-M-38510 Class B		6	TUBE	5		15 pF	CHIP CARRIER		30 ns	8 Amp		1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	TIN LEAD	QUAD	30 MHz	S-CQCC-N20		5.5 V	2.03 mm	8.89 mm	Not Qualified	TRUE	4.5 V	26 mA		e0			8.89 mm	LS
SN74S174FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL			6		5	5	15 pF	CHIP CARRIER	LDCC20,.4SQ	17 ns		FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	0 Cel		QUAD	75 MHz	S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	144 mA			NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	S
SN74HC373FN3	Texas Instruments	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		CMOS			8			2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel		QUAD		S-PQCC-J20
5962-3830102B2X	Texas Instruments	D FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	2		TTL			1		5			CHIP CARRIER		59 ns				125 Cel		POSITIVE EDGE	-55 Cel		QUAD	20 MHz	S-CQCC-N20		5.5 V			Not Qualified	COMPLEMENTARY	4.5 V							LS

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.