COMMERCIAL Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74LS279ADRE4	Texas Instruments	R-S LATCH	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	4		TTL	2	TR	5	5	15 pF	SMALL OUTLINE	SOP16,.25	27 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		LOW LEVEL	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	7 mA	WITH DUAL S INPUT FOR TWO FUNCTIONS	e4	30	260	9.9 mm	LS
SN74LS377N3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5	15 pF	IN-LINE	DIP20,.3	27 ns		FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE		DUAL	30 MHz	R-PDIP-T20		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	28 mA	WITH HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	25.4 mm	LS
SN74LS377NE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1	30000000 Hz	TTL	8	TUBE	5	5	15 pF	IN-LINE	DIP20,.3	27 ns	8 Amp	FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDIP-T20		5.25 V	5.08 mm	6.35 mm	Not Qualified	TRUE	4.75 V	28 mA	WITH HOLD MODE	e4			24.33 mm	LS
SN74LS377NS	Motorola	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5		IN-LINE	DIP20,.3	27 ns		FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE	TIN LEAD	DUAL	40 MHz	R-PDIP-T20		5.25 V	4.19 mm	7.62 mm	Not Qualified	TRUE	4.75 V		WITH HOLD MODE	e0			26.415 mm	LS
SSTVF16859BS	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	NO LEAD	56	HVQCCN	SQUARE	PLASTIC/EPOXY		YES	1			13		2.5	2.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC56,.31SQ,20	2.5 ns		Other Logic ICs	.5 mm	70 Cel		POSITIVE EDGE	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	210 MHz	S-PQCC-N56	1	2.7 V	1 mm	8 mm	Not Qualified	TRUE	2.3 V			e4	40	260	8 mm	SSTV
N74F259D,602	NXP Semiconductors	D LATCH	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	1		5	5	50 pF	SMALL OUTLINE	SOP16,.25	10 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		LOW LEVEL	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	5.5 V			Not Qualified	TRUE	4.5 V	75 mA	1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH	e4				F/FAST
N74F259D,623	NXP Semiconductors	D LATCH	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	1		5		50 pF	SMALL OUTLINE		10 ns				70 Cel		LOW LEVEL	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	5.5 V			Not Qualified	TRUE	4.5 V	75 mA	1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH	e4				F/FAST
SN74ALS273DWR	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	35000000 Hz	TTL	8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.4	15 ns	24 Amp	FF/Latch	1.27 mm	70 Cel		POSITIVE EDGE	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	35 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	29 mA		e4	NOT SPECIFIED	260	12.8 mm	ALS
SN74ALS273DWRE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	35000000 Hz	TTL	8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.4	15 ns	24 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	35 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	29 mA		e4	40	260	12.8 mm	ALS
SN74ALS273DWRG4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.4	15 ns	24 Amp	FF/Latch	1.27 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	35 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	29 mA		e4	30	260	12.8 mm	ALS
SN74AS175ADR	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	4	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	10 ns		FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE		DUAL	100 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V	34 mA			NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AS
SN74LS175NS	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	4		5			SMALL OUTLINE		25 ns			1.27 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDSO-G16	1	5.25 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.75 V			e4	30	260	10.2 mm	LS
SN74LS279AN	Texas Instruments	R-S LATCH	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	4		TTL	2	TUBE	5	5	15 pF	IN-LINE	DIP16,.3	27 ns	8 Amp	FF/Latches	2.54 mm	70 Cel		LOW LEVEL	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	7 mA	WITH DUAL S INPUT FOR TWO FUNCTIONS	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	LS
SN74LS73ADRG4	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	2	30000000 Hz	TTL	2	TR	5	5	15 pF	SMALL OUTLINE	SOP14,.25	20 ns	8 Amp	FF/Latches	1.27 mm	70 Cel	TOTEM POLE	NEGATIVE EDGE	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	30 MHz	R-PDSO-G14	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	6 mA		e4	NOT SPECIFIED	260	8.65 mm	LS
SN74LS73ANE4	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	2	30000000 Hz	TTL	2	TUBE	5	5	15 pF	IN-LINE	DIP14,.3	20 ns	8 Amp	FF/Latches	2.54 mm	70 Cel	TOTEM POLE	NEGATIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	13 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	6 mA		e4			19.305 mm	LS
74F273AD-T	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5		50 pF	SMALL OUTLINE		10 ns			1.27 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G20		5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	43 mA		e4			12.8 mm	F/FAST
N74F273AD	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	125000000 Hz	TTL	8		5	5	50 pF	SMALL OUTLINE	SOP20,.4	10 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	125 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	43 mA		e4	30	260	12.8 mm	F/FAST
N74F273AD,623	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	125000000 Hz	TTL	8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.4	10 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	125 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	43 mA		e4	30	260	12.8 mm	F/FAST
N74F273AD-T	NXP Semiconductors	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	125000000 Hz	TTL	8	TR	5	5	50 pF	SMALL OUTLINE	SOP20,.4	10 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	43 mA		e4			12.8 mm	F/FAST
SN74AS175N	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	4		TTL			5	5		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE		DUAL		R-PDIP-T16					Not Qualified
SN74AS74ANSR	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	105000000 Hz	TTL	1	TR	5	5	50 pF	SMALL OUTLINE	SOP14,.3	9 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	105 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V	16 mA		e4	30	260	10.3 mm	AS
SN74AS74ANSRE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	105000000 Hz	TTL	1	TR	5	5		SMALL OUTLINE	SOP14,.3	9 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	105 MHz	R-PDSO-G14	1	5.5 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V	16 mA		e4	30	260	10.2 mm	AS
MC7479P	Motorola	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		TTL						IN-LINE	DIP14,.3			FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T14					Not Qualified					e0
DM74AS109N	National Semiconductor	J-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		TTL	2		5		50 pF	IN-LINE	DIP16,.3	9 ns		FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE	TIN LEAD	DUAL	105 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V	17 mA		e0			21.755 mm	AS
DM85L51N	National Semiconductor	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	4		TTL						IN-LINE	DIP14,.3		3.6 Amp	FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T14					Not Qualified			9 mA		e0
MC7476P	Motorola	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		TTL	4		5			IN-LINE		30 ns				70 Cel		NEGATIVE EDGE	TIN LEAD	DUAL		R-PDIP-T16		5.25 V			Not Qualified	COMPLEMENTARY	4.75 V			e0				TTL/H/L
74173PC	National Semiconductor	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5	5		IN-LINE	DIP16,.3	43 ns		FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE	Tin/Lead (Sn/Pb)	DUAL	25 MHz	R-PDIP-T16		5.25 V			Not Qualified	TRUE	4.75 V			e0				TTL/H/L
74S74DC	National Semiconductor	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO	2		TTL			5	5		IN-LINE	DIP14,.3			FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE	Tin/Lead (Sn/Pb)	DUAL		R-XDIP-T14					Not Qualified					e0
DM74LS74N	National Semiconductor	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2	25000000 Hz	TTL			5	5		IN-LINE	DIP14,.3		8 Amp	FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T14					Not Qualified			8 mA		e0
MC7473P	Motorola	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		TTL	4		5			IN-LINE		30 ns				70 Cel		POSITIVE EDGE	TIN LEAD	DUAL		R-PDIP-T14		5.25 V			Not Qualified	COMPLEMENTARY	4.75 V			e0				TTL/H/L
MC7475P	Motorola	D LATCH	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	4		BIPOLAR	1		5			IN-LINE						70 Cel		POSITIVE EDGE	TIN LEAD	DUAL		R-PDIP-T16					Not Qualified	COMPLEMENTARY				e0				ECL
SN74LS259N	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5		IN-LINE	DIP16,.3		8 Amp	FF/Latches	2.54 mm	70 Cel		LOW LEVEL		DUAL		R-PDIP-T16					Not Qualified	TRUE		36 mA						LS
SN74LS74ANDS	Motorola	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		TTL	1		5	5		IN-LINE	DIP14,.3	40 ns		FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE	Tin/Lead (Sn/Pb)	DUAL	33 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V			e0			18.86 mm	LS
SN74F74D	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2	100000000 Hz	TTL	1	TUBE	5	5	50 pF	SMALL OUTLINE	SOP14,.25	9.2 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G14	1	5.5 V	1.75 mm	3.91 mm	Not Qualified	COMPLEMENTARY	4.5 V	16 mA		e4	30	260	8.65 mm	F/FAST
SN74H78N	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	2		5		25 pF	IN-LINE	DIP14,.3	27 ns		FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE		DUAL	25 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	25 mA	WITH MASTER SLAVE OPERATION; WITH INDIVIDUAL SET INPUTS		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	TTL/H/L
ECL2540N	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		ECL	2					IN-LINE	DIP16,.3			FF/Latches	2.54 mm	70 Cel				DUAL		R-PDIP-T16					Not Qualified
74F109SJ	Texas Instruments	J-KBAR FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		TTL	2		5			SMALL OUTLINE		9.2 ns			1.27 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL	90 MHz	R-PDSO-G16		5.5 V	2.1 mm	5.3 mm		COMPLEMENTARY	4.5 V						10.1 mm	F/FAST
TIM99604J	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC		NO	8		TTL						IN-LINE	DIP28,.6			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL		R-XDIP-T28					Not Qualified
74F377SCX	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5			SMALL OUTLINE		9 ns			1.27 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL	105 MHz	R-PDSO-G20		5.5 V	2.642 mm	7.493 mm		TRUE	4.5 V		WITH HOLD MODE				12.8015 mm	F/FAST
TIM99606N	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	8		TTL						IN-LINE	DIP28,.6			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL		R-PDIP-T28					Not Qualified
SN29024N	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		TTL						IN-LINE	DIP16,.3			FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE		DUAL		R-PDIP-T16					Not Qualified
74SSTL16857DGGRE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	14		2.5	2.5,2.5/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3.8 ns		Other Logic ICs	.5 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL	150 MHz	R-PDSO-G48		3.6 V	1.2 mm	6.1 mm	Not Qualified	TRUE	2.3 V				NOT SPECIFIED	NOT SPECIFIED	12.5 mm	SSTL
74HSTL16918DGGRG4	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1			9		3.3	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	5.2 ns		FF/Latches	.5 mm	70 Cel	3-STATE	POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G48	1	3.45 V	1.2 mm	6.1 mm	Not Qualified	TRUE	3.15 V			e4	30	260	12.5 mm	TTL/H/L
TIM99604N	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	8		TTL						IN-LINE	DIP28,.6			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL		R-PDIP-T28					Not Qualified
SN15845J	Texas Instruments	R-S FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO	1		DTL						IN-LINE	DIP14,.3			FF/Latches	2.54 mm	70 Cel		MASTER-SLAVE		DUAL		R-XDIP-T14					Not Qualified
74F74SCX	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		TTL	1		5			SMALL OUTLINE		9.2 ns			1.27 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL	100 MHz	R-PDSO-G14		5.5 V	1.753 mm	3.9 mm		COMPLEMENTARY	4.5 V						8.6235 mm	F/FAST
74F74SJX	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		TTL	1		5			SMALL OUTLINE		9.2 ns			1.27 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL	100 MHz	R-PDSO-G14		5.5 V	2.108 mm	5.3 mm		COMPLEMENTARY	4.5 V						10.11 mm	F/FAST
74F74SJ	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		TTL	1		5			SMALL OUTLINE		9.2 ns			1.27 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL	100 MHz	R-PDSO-G14		5.5 V	2.108 mm	5.3 mm		COMPLEMENTARY	4.5 V						10.11 mm	F/FAST

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.