COMMERCIAL Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74ALS113JP4	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO	2		TTL			5	5		IN-LINE	DIP14,.3			FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE		DUAL		R-XDIP-T14
SN74ALS580ADW3	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL	8		5	5		SMALL OUTLINE	SOP20,.4			FF/Latches	1.27 mm	70 Cel	3-STATE			DUAL		R-PDSO-G20
SN74H73J	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	2		TTL	2		5		25 pF	IN-LINE	DIP14,.3	27 ns		FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE		DUAL	25 MHz	R-GDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	25 mA	MASTER SLAVE OPERATION		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	TTL/H/L
SN74LS174DRE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	30000000 Hz	TTL	6	TR	5	5	15 pF	SMALL OUTLINE	SOP16,.25	30 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDSO-G16	1	5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	26 mA		e4	30	260	9.9 mm	LS
SN74S268FN	Texas Instruments	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	6		5		15 pF	CHIP CARRIER	LDCC20,.4SQ	18 ns		FF/Latches	1.27 mm	70 Cel	3-STATE	HIGH LEVEL		QUAD		S-PQCC-J20		5.25 V	4.57 mm	8.9662 mm	Not Qualified	TRUE	4.75 V	119 mA			NOT SPECIFIED	NOT SPECIFIED	8.9662 mm	S
SN74H78JP4	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO	2		TTL						IN-LINE	DIP14,.3			FF/Latches	2.54 mm	70 Cel		MASTER-SLAVE		DUAL		R-XDIP-T14
SN7472N	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	2		5		15 pF	IN-LINE	DIP14,.3	40 ns		FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE		DUAL	15 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	20 mA	WITH MASTER SLAVE OPERATION; 3 J & 3 K INPUTS ANDED		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	TTL/H/L
SN74ALS580FN	Texas Instruments	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	8		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel	3-STATE			QUAD		S-PQCC-J20					Not Qualified
SN7470J4	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO	1		TTL						IN-LINE	DIP14,.3			FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE		DUAL		R-XDIP-T14											NOT SPECIFIED	NOT SPECIFIED
SN74ALS109JP4	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	2		TTL			5	5		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE		DUAL		R-XDIP-T16
5962-01-010-6445	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO	1		TTL						IN-LINE	DIP14,.3			FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE		DUAL		R-XDIP-T14					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74ALS74N1	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		TTL			5	5		IN-LINE	DIP14,.3			FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE		DUAL		R-PDIP-T14					Not Qualified
SN74AS573FN3	Texas Instruments	D LATCH	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		TTL	8		5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel	3-STATE			QUAD		S-PQCC-J20
SN74ALS114AN1	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		TTL			5	5		IN-LINE	DIP14,.3			FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE		DUAL		R-PDIP-T14					Not Qualified
SN74ALS273DWE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	35000000 Hz	TTL	8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP20,.4	15 ns	24 Amp	FF/Latch	1.27 mm	70 Cel		POSITIVE EDGE	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	35 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	29 mA		e4	NOT SPECIFIED	260	12.8 mm	ALS
SN74LS378J-00	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		TTL	6		5		15 pF	IN-LINE		27 ns			2.54 mm	70 Cel		POSITIVE EDGE		DUAL	30 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	22 mA	WITH HOLD MODE				19.56 mm	LS
SN74F273D	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8		TTL			5	5		SMALL OUTLINE	SOP20,.4		20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE		DUAL		R-PDSO-G20					Not Qualified			88 mA
SN74AS580N1	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE			DUAL		R-PDIP-T20					Not Qualified
SN74AS874JT4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC	NO	2		TTL			5	5		IN-LINE	DIP24,.3			FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE		DUAL		R-XDIP-T24
5962-01-030-7992	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		TTL			5	5		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE		DUAL		R-PDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
5962-01-158-9156	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		TTL			5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL		R-PDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74H103N-00	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		TTL	2		5		25 pF	IN-LINE		20 ns			2.54 mm	70 Cel		NEGATIVE EDGE		DUAL	40 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	38 mA					19.305 mm	TTL/H/L
SN74ALS112ADRE4	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	30000000 Hz	TTL	2	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	19 ns	8 Amp	FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V	4.5 mA		e4	30	260	9.9 mm	ALS
SN74LS112ANE4	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	30000000 Hz	TTL	2	TUBE	5	5	15 pF	IN-LINE	DIP16,.3	20 ns	8 Amp	FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	45 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	6 mA		e4			19.305 mm	LS
SN74F374DW3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	70000000 Hz	TTL			5	5		SMALL OUTLINE	SOP20,.4		24 Amp	FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL		R-PDSO-G20								86 mA
SN74S175N	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	75000000 Hz	TTL	4	TUBE	5	5	15 pF	IN-LINE	DIP16,.3	17 ns	20 Amp	FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	75 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	96 mA		e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	S
SN74AS175BDRE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL	4	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	10 ns		FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE		DUAL	100 MHz	R-PDSO-G16		5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V	34 mA			NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AS
SN74AS113J	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO	2		TTL						IN-LINE	DIP14,.3			FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE		DUAL		R-XDIP-T14					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74LS173ANE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	25000000 Hz	TTL	4	TUBE	5	5	45 pF	IN-LINE	DIP16,.3	35 ns	24 Amp	FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	30 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	24 mA	WITH HOLD MODE; WITH DUAL OUTPUT ENABLE; DISABLE TIME CL = 5PF	e4			19.305 mm	LS
SN74ALS842JTP4	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC	NO	1		TTL	10					IN-LINE	DIP24,.3		24 Amp	FF/Latches	2.54 mm	70 Cel	3-STATE			DUAL		R-XDIP-T24
SN74S74NSRG4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	TTL	1	TR	5	5		SMALL OUTLINE	SOP14,.3	9 ns	20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	75 MHz	R-PDSO-G14	1	5.25 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.75 V	25 mA		e4	30	260	10.2 mm	S
SN74S374N1	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		TTL			5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL		R-PDIP-T20					Not Qualified
SN74376N-10	Texas Instruments	J-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	4		5		15 pF	IN-LINE		35 ns			2.54 mm	70 Cel		POSITIVE EDGE		DUAL	30 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	74 mA					19.305 mm	TTL/H/L
SN74LS171FN3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	4		TTL						CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE		QUAD		S-PQCC-J20
SN74174DW	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	GULL WING		SOP	RECTANGULAR	CERAMIC	YES	6		TTL			5	5		SMALL OUTLINE	SO(UNSPEC)			FF/Latches		70 Cel		POSITIVE EDGE		DUAL							Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74LS279AJ4	Texas Instruments	R-S LATCH	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	4		TTL	1		5	5		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	70 Cel				DUAL		R-XDIP-T16
SN74175N-00	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	4		5		15 pF	IN-LINE		35 ns			2.54 mm	70 Cel		POSITIVE EDGE		DUAL	25 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	45 mA					19.305 mm	TTL/H/L
SN74L77T-03	Texas Instruments	D LATCH	COMMERCIAL	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	2		TTL	2		5		15 pF	FLATPACK		30 ns			1.27 mm	70 Cel		HIGH LEVEL		DUAL		R-GDFP-F14		5.25 V		3.683 mm	Not Qualified	TRUE	4.75 V	27 mA					6.48 mm	TTL/H/L
SN7473J-00	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	2		TTL	2		5		15 pF	IN-LINE		40 ns			2.54 mm	70 Cel		NEGATIVE EDGE		DUAL	15 MHz	R-GDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	20 mA	MASTER SLAVE OPERATION				19.56 mm	TTL/H/L
SN74376JP4	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	4		TTL						IN-LINE	DIP16,.3			FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE		DUAL		R-XDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74LS107AN-00	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		TTL	2		5		15 pF	IN-LINE		20 ns			2.54 mm	70 Cel		NEGATIVE EDGE		DUAL	30 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	6 mA					19.305 mm	LS
SN74AS109NP1	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		TTL						IN-LINE	DIP16,.3			FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE		DUAL		R-PDIP-T16					Not Qualified
SN7475JP4	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	1		TTL	4		5	5		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	70 Cel				DUAL		R-XDIP-T16
SN74F74D3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	100000000 Hz	TTL			5	5		SMALL OUTLINE	SOP14,.25		20 Amp	FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE		DUAL		R-PDSO-G14								16 mA
SN74LS175J-00	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		TTL	4		5		15 pF	IN-LINE		30 ns			2.54 mm	70 Cel		POSITIVE EDGE		DUAL	30 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	18 mA					19.56 mm	LS
SN74ALS846DW3	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		TTL	8					SMALL OUTLINE	SOP24,.4		24 Amp	FF/Latches	1.27 mm	70 Cel	3-STATE			DUAL		R-PDSO-G24
SN74SSTV16859DGGG4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	64	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	13		2.5	2.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20	2.8 ns		Other Logic ICs	.5 mm	70 Cel		POSITIVE EDGE		DUAL	200 MHz	R-PDSO-G64		2.7 V	1.2 mm	6.1 mm	Not Qualified	TRUE	2.3 V						17 mm	SSTV
SN74ALS533N1	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		TTL	8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE			DUAL		R-PDIP-T20					Not Qualified

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.