COMMERCIAL Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74LS173ADRE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	25000000 Hz	TTL	4	TR	5	5	45 pF	SMALL OUTLINE	SOP16,.25	35 ns	24 Amp	FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL	30 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.75 V	24 mA	WITH HOLD MODE; WITH DUAL OUTPUT ENABLE; DISABLE TIME CL = 5PF		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	LS
SN74173N	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5	5	50 pF	IN-LINE	DIP16,.3	43 ns		FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL	25 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V		WITH HOLD MODE; WITH DUAL OUTPUT ENABLE; DISABLE TIME CL = 5PF		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	TTL/H/L
SN74LS112AJ	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	2		TTL	2		5	5	15 pF	IN-LINE	DIP16,.3	20 ns		FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE		DUAL	30 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	6 mA			NOT SPECIFIED	NOT SPECIFIED	19.56 mm	LS
SN74LS76ADR	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		TTL	2	TR	5	5	15 pF	SMALL OUTLINE	SOP16,.25	20 ns		FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE		DUAL	45 MHz	R-PDSO-G16		5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V	6 mA	MASTER SLAVE OPERATION		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	LS
5962-01-006-7949	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO	2		TTL			5	5		IN-LINE	DIP14,.3			FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE		DUAL		R-XDIP-T14					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74AS826DWP3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	8		TTL			5	5		SMALL OUTLINE	SOP24,.4			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL		R-PDSO-G24
SN74S174J-00	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	6		5		15 pF	IN-LINE		17 ns			2.54 mm	70 Cel		POSITIVE EDGE		DUAL	75 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V	144 mA					19.56 mm	S
SN74ALS879NT1	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		TTL			5	5		IN-LINE	DIP24,.3			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL		R-PDIP-T24					Not Qualified
SN74LS113AJP4	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC		NO	2		TTL			5	5		IN-LINE	DIP14,.3			FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE		DUAL		R-XDIP-T14
SN74H74N-10	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		TTL	1		5		25 pF	IN-LINE		20 ns			2.54 mm	70 Cel		POSITIVE EDGE		DUAL	35 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	25 mA					19.305 mm	TTL/H/L
SN74ALS534NP1	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	8		TTL			5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL		R-PDIP-T20					Not Qualified
SN74L75N-10	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		TTL	2		5		15 pF	IN-LINE		30 ns			2.54 mm	70 Cel		HIGH LEVEL		DUAL		R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	27 mA					19.305 mm	TTL/H/L
SN74LS279AN3	Texas Instruments	R-S LATCH	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	4		TTL	2		5	5		IN-LINE	DIP16,.3	27 ns		FF/Latches	2.54 mm	70 Cel		LOW LEVEL		DUAL		R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V		WITH DUAL S INPUT FOR TWO FUNCTIONS		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	LS
SN7472N-00	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	2		5		15 pF	IN-LINE		40 ns			2.54 mm	70 Cel		NEGATIVE EDGE		DUAL	15 MHz	R-PDIP-T14		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	20 mA	WITH MASTER SLAVE OPERATION				19.305 mm	TTL/H/L
SN74ALS373DW3	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8		5	5		SMALL OUTLINE	SOP20,.4			FF/Latches	1.27 mm	70 Cel	3-STATE			DUAL		R-PDSO-G20
SN74S113AD	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		TTL	2		5	5		SMALL OUTLINE	SOP14,.25	7 ns		FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE		DUAL	125 MHz	R-PDSO-G14		5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V				NOT SPECIFIED	NOT SPECIFIED	8.65 mm	S
SN74LS259NP3	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5		IN-LINE	DIP16,.3		8 Amp	FF/Latches	2.54 mm	70 Cel				DUAL		R-PDIP-T16								36 mA
SN74259NP1	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	70 Cel				DUAL		R-PDIP-T16					Not Qualified
SN74AS573NP1	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE			DUAL		R-PDIP-T20					Not Qualified
SN74LS398DWR	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	4		5		15 pF	SMALL OUTLINE		32 ns			1.27 mm	70 Cel		POSITIVE EDGE		DUAL		R-PDSO-G20		5.25 V	2.65 mm	7.5 mm	Not Qualified	COMPLEMENTARY	4.75 V	13 mA	FOUR 2:1 MUX FOLLOWED BY REGISTER				12.8 mm	LS
SN74S74AD	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		TTL	1		5			SMALL OUTLINE		9 ns			1.27 mm	70 Cel		POSITIVE EDGE		DUAL	110 MHz	R-PDSO-G14		5.25 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.75 V						8.65 mm	S
SN74LS364NP3	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	8		TTL			5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL		R-PDIP-T20											NOT SPECIFIED	NOT SPECIFIED
SN74AS843JT	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	9					IN-LINE	DIP24,.3			FF/Latches	2.54 mm	70 Cel	3-STATE			DUAL		R-XDIP-T24					Not Qualified
SN74ALS74ANP1	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		TTL			5	5		IN-LINE	DIP14,.3			FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE		DUAL		R-PDIP-T14					Not Qualified
SN74AS29845DWP3	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL	8					SMALL OUTLINE	SOP24,.4			FF/Latches	1.27 mm	70 Cel	3-STATE			DUAL		R-PDSO-G24											NOT SPECIFIED	NOT SPECIFIED
SN74LS175N-10	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	4		5		15 pF	IN-LINE		30 ns			2.54 mm	70 Cel		POSITIVE EDGE		DUAL	30 MHz	R-PDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	18 mA					19.305 mm	LS
SN74LS606NP1	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	8		TTL						IN-LINE	DIP28,.6			FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL		R-PDIP-T28					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74S268JP4	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	6					IN-LINE	DIP16,.3			FF/Latches	2.54 mm	70 Cel	3-STATE			DUAL		R-XDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74ALS873BNTP3	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		TTL	4		5	5		IN-LINE	DIP24,.3			FF/Latches	2.54 mm	70 Cel	3-STATE			DUAL		R-PDIP-T24
SN74ALS112J	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	2		TTL			5	5		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE		DUAL		R-XDIP-T16					Not Qualified
SN74ALS29843FN	Texas Instruments	D LATCH	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY		YES	1		TTL	9		5	5		CHIP CARRIER	LDCC28,.5SQ		48 Amp	FF/Latches	1.27 mm	70 Cel	3-STATE			QUAD		S-PQCC-J28					Not Qualified			85 mA
SN74ALS174FN3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	6		TTL			5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		POSITIVE EDGE		QUAD		S-PQCC-J20
SN74LS363J4	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC		NO	1		TTL	8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	70 Cel	3-STATE			DUAL		R-XDIP-T20											NOT SPECIFIED	NOT SPECIFIED
SN74LS173ANP3	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	4		TTL			5	5		IN-LINE	DIP16,.3		24 Amp	FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL		R-PDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74F109N-10	Texas Instruments	J-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		TTL	2		5			IN-LINE		9.2 ns			2.54 mm	70 Cel		POSITIVE EDGE		DUAL	150 MHz	R-PDIP-T16		5.5 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V						19.305 mm	F/FAST
SN74276D	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	4		TTL						SMALL OUTLINE	SOP20,.4			FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE		DUAL		R-PDSO-G20					Not Qualified
SN74110NP3	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL						IN-LINE	DIP14,.3			FF/Latches	2.54 mm	70 Cel		MASTER-SLAVE		DUAL		R-PDIP-T14											NOT SPECIFIED	NOT SPECIFIED
SN74ALS114AFN	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	2		TTL			5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel		NEGATIVE EDGE		QUAD		S-PQCC-J20					Not Qualified
SN74LS73AN3	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2		TTL			5	5		IN-LINE	DIP14,.3			FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE		DUAL		R-PDIP-T14
SN74ALS259D	Texas Instruments	D LATCH	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	1		TTL	8	TUBE	5	5	50 pF	SMALL OUTLINE	SOP16,.25	13 ns	8 Amp	FF/Latch	1.27 mm	70 Cel		LOW LEVEL	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	22 mA	1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH	e4	30	260	9.9 mm	ALS
SN74LS173AJ	Texas Instruments	D FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED		NO	1		TTL	4		5	5	45 pF	IN-LINE	DIP16,.3	30 ns	24 Amp	FF/Latches	2.54 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL	30 MHz	R-GDIP-T16		5.25 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.75 V		WITH HOLD MODE; WITH DUAL OUTPUT ENABLE; DISABLE TIME CL = 5PF		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	LS
DM74LS73AM	Texas Instruments	J-K FLIP-FLOP	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		TTL	2		5			SMALL OUTLINE		28 ns			1.27 mm	70 Cel		NEGATIVE EDGE		DUAL	30 MHz	R-PDSO-G14		5.25 V	1.753 mm	3.9 mm		COMPLEMENTARY	4.75 V						8.6235 mm	LS
SN74F174ADE4	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	1	80000000 Hz	TTL	6	TUBE	5	5	50 pF	SMALL OUTLINE	SOP16,.25	11 ns	20 Amp	FF/Latch	1.27 mm	70 Cel		POSITIVE EDGE	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	55 mA		e4	30	260	9.9 mm	F/FAST
SN74ALS574FN	Texas Instruments	D FLIP-FLOP	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY		YES	8		TTL			5	5		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE		QUAD		S-PQCC-J20					Not Qualified
SN74AS824DW3	Texas Instruments	D FLIP-FLOP	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	9		TTL						SMALL OUTLINE	SOP24,.4			FF/Latches	1.27 mm	70 Cel	3-STATE	POSITIVE EDGE		DUAL		R-PDSO-G24
5962-01-324-7648	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	2	105000000 Hz	TTL			5	5		IN-LINE	DIP14,.3		20 Amp	FF/Latches	2.54 mm	70 Cel		POSITIVE EDGE		DUAL		R-PDIP-T14					Not Qualified			16 mA			NOT SPECIFIED	NOT SPECIFIED
SN74LS76AJP4	Texas Instruments	JBAR-KBAR FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC		NO	2		TTL			5	5		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE		DUAL		R-XDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74ALS841-1NTP3	Texas Instruments	D LATCH	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	1		TTL	10					IN-LINE	DIP24,.3		48 Amp	FF/Latches	2.54 mm	70 Cel	3-STATE			DUAL		R-PDIP-T24

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.