INDUSTRIAL Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74SSTUB32866ZKER	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1	410000000 Hz	TTL	25		1.8	1.8		GRID ARRAY, LOW PROFILE, FINE PITCH		.8 ns		Other Logic ICs	.8 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN SILVER COPPER	BOTTOM	410 MHz	R-PBGA-B96	3	1.9 V	1.4 mm	5.5 mm	Not Qualified	TRUE	1.7 V			e1	30	260	13.5 mm	SSTU
SN74HC573N	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	8			2/6	50 pF	IN-LINE	DIP20,.3		7.8 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDIP-T20					Not Qualified					e4
SN74HC174FHP4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	6		CMOS				2/6		CHIP CARRIER	LCC20,.35SQ			FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		QUAD		S-XQCC-N20
SN74HCT374DW3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8		CMOS			5	5		SMALL OUTLINE	SOP20,.4		6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G20
SN74HC174NSRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	25000000 Hz	CMOS	6	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.3	200 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4	30	260	10.2 mm	HC/UH
SN74HC259PWLE	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8	TR	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	165 ns	5.2 Amp	FF/Latches	.65 mm	85 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16		6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH		NOT SPECIFIED	NOT SPECIFIED	5 mm	HC/UH
SN74HC7074NTP1	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			CMOS						IN-LINE	DIP24,.3			FF/Latches	2.54 mm	85 Cel			-40 Cel		DUAL		R-PDIP-T24					Not Qualified
SN74HC174PW	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	25000000 Hz	CMOS	6	TUBE	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	200 ns	5.2 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V	.08 mA		e4	30	260	5 mm	HC
SN74HC375D	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	4			2/6	50 pF	SMALL OUTLINE	SOP16,.25		5.2 Amp	FF/Latches	1.27 mm	85 Cel			-40 Cel		DUAL		R-PDSO-G16					Not Qualified
SN74HCT573JP4	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	1		CMOS	8		5	5		IN-LINE	DIP20,.3		6 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-XDIP-T20
SN74HC375FH	Texas Instruments	D LATCH	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	1		CMOS	4			2/6		CHIP CARRIER	LCC20,.35SQ			FF/Latches	1.27 mm	85 Cel			-40 Cel		QUAD		S-XQCC-N20					Not Qualified
SN74HC75N1	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS	2			2/6		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	85 Cel			-40 Cel		DUAL		R-PDIP-T16					Not Qualified
SN74LV273PWR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	26 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	60 MHz	R-PDSO-G20		5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2.7 V						6.5 mm	LV/LV-A/LVX/H
SN74HC77N1	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	4			2/6		IN-LINE	DIP14,.3			FF/Latches	2.54 mm	85 Cel			-40 Cel		DUAL		R-PDIP-T14					Not Qualified
SN74HC109DTE4	Texas Instruments	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	25000000 Hz	CMOS	2	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	220 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V		DUMMY VAL	e4	30	260	9.9 mm	HC/UH
SN74HC374DW3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8		CMOS				2/6		SMALL OUTLINE	SOP20,.4			FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G20											NOT SPECIFIED	NOT SPECIFIED
SN74AC74PWE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	95000000 Hz	CMOS	1		3	3.3/5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	16 ns	12 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G14	1	6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	AC
SN74HC173DR-00	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	4		5		50 pF	SMALL OUTLINE		38 ns			1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		WITH HOLD MODE; WITH DUAL OUTPUT ENABLE				9.9 mm	HC/UH
SN74HC114N1	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS				2/6		IN-LINE	DIP14,.3			FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-PDIP-T14					Not Qualified
SN74HC78D3	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS				2/6		SMALL OUTLINE	SOP14,.25			FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-PDSO-G14
SN74LV273ANSE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		2.5			SMALL OUTLINE		25 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4	30	260	12.6 mm	LV/LV-A/LVX/H
SN74AC74N	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	95000000 Hz	CMOS	1	TUBE	3	3.3/5	50 pF	IN-LINE	DIP14,.3	16 ns	24 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	125 MHz	R-PDIP-T14		6 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V	.02 mA		e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	AC
SN74ABT377APWRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS	8	TR	5	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	7.3 ns	64 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V	30 mA	WITH HOLD MODE	e4	30	260	6.5 mm	ABT
SN74AHC74DGVRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS	1	TR	3.3	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25,16	17.5 ns	8 Amp	FF/Latches	.4 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	3.6 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	4.4 mm	AHC/VHC/H/U/V
SN74AHCT74RGYRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	NO LEAD	14	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2	65000000 Hz	CMOS	1	TR	5	5	50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14/18,.14SQ,20	10 ns	8 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	80 MHz	S-PQCC-N14	2	5.5 V	1 mm	3.5 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	3.5 mm	AHCT/VHCT/VT
SN74LVC2G74DCT	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	1		1.8			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH		14.4 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	200 MHz	R-PDSO-G8		5.5 V	1.3 mm	2.8 mm	Not Qualified	COMPLEMENTARY	1.65 V						2.95 mm	LVC/LCX/Z
SN74LV175APWRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	45000000 Hz	CMOS	4	TR	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	27 ns	6 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	LV/LV-A/LVX/H
SN74ABT377APWG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS	8	TUBE	5	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	7.3 ns	64 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V	30 mA	WITH HOLD MODE	e4	30	260	6.5 mm	ABT
SN74AHCT174DR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	65000000 Hz	CMOS	6	TR	5	5	50 pF	SMALL OUTLINE	SOP16,.25	10 ns	8 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	80 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	4.5 V	.04 mA		e4	NOT SPECIFIED	260	9.9 mm	AHCT/VHCT/VT
SN74HC374NP1	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		CMOS				2/6		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74AUC1G74DCTR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	200000000 Hz	CMOS	1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP8,.16	3.8 ns	9 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	275 MHz	R-PDSO-G8	1	2.7 V	1.3 mm	2.8 mm	Not Qualified	COMPLEMENTARY	.8 V	.01 mA		e4	NOT SPECIFIED	260	2.95 mm	AUC
SN74LV174ADRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	50000000 Hz	CMOS	6	TR	2.5	3.3	50 pF	SMALL OUTLINE	SOP16,.25	23 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	110 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	.02 mA		e4	NOT SPECIFIED	260	9.9 mm	LV/LV-A/LVX/H
SN74LV174ADGVR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	50000000 Hz	CMOS	6	TR	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25,16	23 ns	12 Amp	FF/Latches	.4 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	110 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	3.6 mm	Not Qualified	TRUE	2 V	.02 mA		e4	NOT SPECIFIED	260	4.4 mm	LV/LV-A/LVX/H
SN74ALVC74D	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		1.8	3.3	50 pF	SMALL OUTLINE	SOP14,.25		24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G14		3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	1.65 V				NOT SPECIFIED	NOT SPECIFIED	8.65 mm	ALVC/VCX/A
SN74HC4724N-10	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	1		5		50 pF	IN-LINE		43 ns			2.54 mm	85 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH				19.305 mm	HC/UH
SN74ALVTH16721DGGR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	20		BICMOS		TR		2.5/3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		64 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G56					Not Qualified
SN74AUC74RGYRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	NO LEAD	14	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2	225000000 Hz	CMOS	1	TR	1.2	1.2/2.5	15 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14/18,.14SQ,20	4 ns	5 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	350 MHz	S-PQCC-N14	2	2.7 V	1 mm	3.5 mm	Not Qualified	COMPLEMENTARY	.8 V			e4	30	260	3.5 mm	AUC
SN74HC378D-00	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	6		5		50 pF	SMALL OUTLINE		40 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G16		6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		WITH HOLD MODE				9.9 mm	HC/UH
SN74HC112D3	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS				2/6		SMALL OUTLINE	SOP16,.25			FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-PDSO-G16											NOT SPECIFIED	NOT SPECIFIED
SN74HC573FN3	Texas Instruments	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		CMOS	8			2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel		QUAD		S-PQCC-J20
SN74HC7076NT	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			CMOS						IN-LINE	DIP24,.3			FF/Latches	2.54 mm	85 Cel			-40 Cel		DUAL		R-PDIP-T24					Not Qualified
SN74HC73D3	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS				2/6		SMALL OUTLINE	SOP14,.25			FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-PDSO-G14
SN74AHC273DBRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS	8	TR	3.3	2/5.5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	19.5 ns	8 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4	30	260	7.2 mm	AHC/VHC/H/U/V
SN74HCT273DBRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS	8	TR	5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	42 ns	4 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V			e4	30	260	7.2 mm	HCT
SN74HC114FN3	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2		CMOS				2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		QUAD		S-PQCC-J20
SN74HC273DBLE	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		5			SMALL OUTLINE, SHRINK PITCH		200 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDSO-G20		6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		DUMMY VAL				7.2 mm	HC/UH
SN74HC563J4	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	1		CMOS	8			2/6		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-XDIP-T20
SN74ABT273NE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	150000000 Hz	BICMOS	8	TUBE	5	5	50 pF	IN-LINE	DIP20,.3	7.3 ns	64 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V	30 mA		e4			24.325 mm	ABT

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.