INDUSTRIAL Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74HC76N1	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS				2/6		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-PDIP-T16					Not Qualified
SN74HC107N-10	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS	2		5		50 pF	IN-LINE		32 ns			2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDIP-T14		6 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V		MASTER SLAVE OPERATION				19.305 mm	HC/UH
SN74AUC1G79DCKRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	200000000 Hz	CMOS	1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	3.9 ns	9 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	275 MHz	R-PDSO-G5	1	2.7 V	1.1 mm	1.25 mm	Not Qualified	TRUE	.8 V	.01 mA		e4	30	260	2 mm	AUC
SN74AHC74DGVRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS	1	TR	3.3	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25,16	17.5 ns	8 Amp	FF/Latches	.4 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	3.6 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	4.4 mm	AHC/VHC/H/U/V
SN74HC78D	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	25000000 Hz	CMOS				2/6	50 pF	SMALL OUTLINE	SOP14,.25		5.2 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-PDSO-G14					Not Qualified
SN74LVC112ADGVRE4	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS	2	TR	1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25,16	7.1 ns	24 Amp	FF/Latches	.4 mm	85 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G16	1	3.6 V	1.2 mm	3.6 mm	Not Qualified	COMPLEMENTARY	1.65 V			e4	30	260	4.4 mm	LVC/LCX/Z
SN74HC375N-10	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS	2		5		50 pF	IN-LINE		33 ns			2.54 mm	85 Cel		HIGH LEVEL	-40 Cel		DUAL		R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V						19.305 mm	HC/UH
SN74AHC74DGV	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25,16	17.5 ns			.4 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	110 MHz	R-PDSO-G14		5.5 V	1.2 mm	3.6 mm	Not Qualified	COMPLEMENTARY	2 V						4.4 mm	AHC
SN74HC74D3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS				2/6		SMALL OUTLINE	SOP14,.25			FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G14
SN74HC373AN	Texas Instruments	JBAR-KBAR FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	8	TUBE		2/6	50 pF	IN-LINE	DIP20,.3		6 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDIP-T20					Not Qualified					e4
SN74HC573DW3	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8			2/6		SMALL OUTLINE	SOP20,.4			FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G20
SN74LV74APWE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	45000000 Hz	CMOS	1	TUBE	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	23 ns	6 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	LV/LV-A/LVX/H
SN74HC377J	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	8		CMOS				2/6		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-XDIP-T20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74LVC1G80DCKTG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	1	TR	1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	9.9 ns	32 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	160 MHz	R-PDSO-G5	1	5.5 V	1.1 mm	1.25 mm	Not Qualified	INVERTED	1.65 V			e4	30	260	2 mm	LVC/LCX/Z
SN74AUP1G79DCKTE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	24 ns	1.7 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	260 MHz	R-PDSO-G5	1	3.6 V	1.1 mm	1.25 mm	Not Qualified	TRUE	.8 V			e4	30	260	2 mm	AUP/ULP/V
SN74AUC1G79YEPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	5	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1	200000000 Hz	CMOS	1	TR	1.2	1.2/2.5	150 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA5,2X3,20	3.9 ns	5 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	275 MHz	R-PBGA-B5		2.7 V	.5 mm	.9 mm	Not Qualified	TRUE	.8 V				NOT SPECIFIED	NOT SPECIFIED	1.4 mm	AUC
SN74HC75DR	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2	TR		2/6	50 pF	SMALL OUTLINE	SOP16,.25		5.2 Amp	FF/Latches	1.27 mm	85 Cel		HIGH LEVEL	-40 Cel		DUAL		R-PDSO-G16					Not Qualified	COMPLEMENTARY								HC/UH
SN74ABT377ANSRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS	8	TR	5	5		SMALL OUTLINE	SOP20,.3	7.3 ns	64 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	30 mA	WITH HOLD MODE	e4	30	260	12.6 mm	ABT
SN74AUP2G80DCUR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	80000000 Hz	CMOS	1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	28.7 ns	4 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	260 MHz	R-PDSO-G8	1	3.6 V	.9 mm	2 mm	Not Qualified	TRUE	.8 V	.0009 mA		e4	NOT SPECIFIED	260	2.3 mm	AUP/ULP/V
SN74HC107FH4	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	2		CMOS				2/6		CHIP CARRIER	LCC20,.35SQ			FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		QUAD		S-XQCC-N20
SN74AUC1G80YEPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	5	VFBGA	RECTANGULAR	UNSPECIFIED	YES	1	200000000 Hz	CMOS	1	TR	1.2	1.2/2.5	15 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA5,2X3,20	3.9 ns	5 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	275 MHz	R-XBGA-B5		2.7 V	.5 mm	.9 mm	Not Qualified	INVERTED	.8 V				NOT SPECIFIED	NOT SPECIFIED	1.4 mm	AUC
SN74HC7074NT-00	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS	1		5		50 pF	IN-LINE		44 ns			2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	22 MHz	R-PDIP-T24		6 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V		TWO INVERTERS; ONE 2-INPUT NOR GATE; ONE 2-INPUT NAND GATE				31.64 mm	HC/UH
SN74HC259FN3	Texas Instruments	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		CMOS	8			2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel			-40 Cel		QUAD		S-PQCC-J20											NOT SPECIFIED	NOT SPECIFIED
5962-01-033-2279	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS				5/15		IN-LINE	DIP14,.3			FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T14					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74HC379J4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	4		CMOS						IN-LINE	DIP16,.3			FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-XDIP-T16
SN74AUC1G79DCKR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	200000000 Hz	CMOS	1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	3.9 ns	9 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	275 MHz	R-PDSO-G5	1	2.7 V	1.1 mm	1.25 mm	Not Qualified	TRUE	.8 V	.01 mA		e4	NOT SPECIFIED	260	2 mm	AUC
SN74ACT74DWR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		5			SMALL OUTLINE		13 ns				85 Cel		POSITIVE EDGE	-40 Cel		DUAL	125 MHz	R-PDSO-G14		5.5 V			Not Qualified	COMPLEMENTARY	4.5 V							ACT
MM74HC259J/A+	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS	1		5			IN-LINE		225 ns				85 Cel		LOW LEVEL	-40 Cel		DUAL		R-GDIP-T16		6 V				TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH					HC/UH
SN74HCT534J	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	8		CMOS			5	5		IN-LINE	DIP20,.3		6 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-XDIP-T20					Not Qualified
SN74LV1G79YZPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	5	VFBGA	RECTANGULAR	UNSPECIFIED	YES	1		CMOS	1		1.8			GRID ARRAY, VERY THIN PROFILE, FINE PITCH		9.9 ns			.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	160 MHz	R-XBGA-B5		5.5 V	.5 mm	.9 mm	Not Qualified	TRUE	1.65 V						1.4 mm	LV/LV-A/LVX/H
SN74LVC1G80YZAR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	5	VFBGA	RECTANGULAR	UNSPECIFIED	YES	1		CMOS	1	TR	1.8	3.3	50 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA5,2X3,20	9.9 ns	24 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	160 MHz	R-XBGA-B5		5.5 V	.5 mm	.9 mm	Not Qualified	INVERTED	1.65 V				NOT SPECIFIED	NOT SPECIFIED	1.4 mm	LVC/LCX/Z
SN74HCT534NP1	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		CMOS			5	5		IN-LINE	DIP20,.3		6 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74LVC112APWG4	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS	2	TUBE	1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	7.1 ns	24 Amp	FF/Latches	.65 mm	85 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G16	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	1.65 V			e4	30	260	5 mm	LVC/LCX/Z
SN74AHCT174PWRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	65000000 Hz	CMOS	6	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	10 ns	8 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	80 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V			e4	30	260	5 mm	AHCT/VHCT/VT
SN74LVC112PW	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-PDSO-G16		3.6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2.7 V						5 mm	LVC/LCX/Z
SN74HCT273DBRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS	8	TR	5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	42 ns	4 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V			e4	30	260	7.2 mm	HCT
SN74HC113D-00	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		35 ns			1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDSO-G14		6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V						8.65 mm	HC/UH
SN74HC7074NT1	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			CMOS						IN-LINE	DIP24,.3			FF/Latches	2.54 mm	85 Cel			-40 Cel		DUAL		R-PDIP-T24					Not Qualified
SN74LVC112ADBRG4	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS	2	TR	1.8	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	7.1 ns	24 Amp	FF/Latches	.65 mm	85 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G16	1	3.6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	1.65 V			e4	30	260	6.2 mm	LVC/LCX/Z
SN74HSTL16918DGGR	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1			9	TR	3.3	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	5.2 ns	24 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	LOW LEVEL	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL		R-PDSO-G48	1	3.45 V	1.2 mm	6.1 mm	Not Qualified	TRUE	3.15 V	100 mA		e4	NOT SPECIFIED	260	12.5 mm	TTL/H/L
MM74HC174J/A+	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS	6		5			IN-LINE		206 ns				85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-GDIP-T16		6 V				TRUE	2 V							HC/UH
SN74HC379D3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4		CMOS						SMALL OUTLINE	SOP16,.25			FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G16
SN74LVTH273PWLE	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS	8	TR	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	5.5 ns	64 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	150 MHz	R-PDSO-G20		3.6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2.7 V	5 mA			NOT SPECIFIED	NOT SPECIFIED	6.5 mm	LVT
SN74HC73J4	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO	2		CMOS				2/6		IN-LINE	DIP14,.3			FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-XDIP-T14
SN74HC564JP4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	8		CMOS				2/6		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-XDIP-T20
SN74HC378N	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	20000000 Hz	CMOS	6		5		50 pF	IN-LINE	DIP16,.3	200 ns	5.2 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	23 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	19.305 mm	HC/UH
SN74AUC1G74RSERG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVQCCN	SQUARE	UNSPECIFIED	YES	1	200000000 Hz	CMOS	1	TR	1.2	1.2/2.5	15 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC8,.06SQ,20	3.8 ns	5 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	275 MHz	S-XQCC-N8	1	2.7 V	.6 mm	1.5 mm	Not Qualified	COMPLEMENTARY	.8 V			e4	30	260	1.5 mm	AUC
CD40175BCJ	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS	4		5			IN-LINE		300 ns			2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	6 MHz	R-GDIP-T16		15 V	5.08 mm	7.62 mm		COMPLEMENTARY	3 V		LG_MAX				19.94 mm	4000/14000/40000

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.