INDUSTRIAL Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74HC534NP1	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		CMOS				2/6		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74LVC112D	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		3.3	3.3		SMALL OUTLINE	SOP16,.25		24 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-PDSO-G16		3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2.7 V				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	LVC/LCX/Z
SN74HC259DTG4	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	165 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	9.9 mm	HC/UH
SN74ABT377ADBRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS	8	TR	5	5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	7.3 ns	64 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	30 mA	WITH HOLD MODE	e4	30	260	7.2 mm	ABT
SN74AUP1G79DBVTG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	220000000 Hz	CMOS	1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	24 ns	4 Amp	FF/Latches	.95 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	260 MHz	R-PDSO-G5	1	3.6 V	1.45 mm	1.6 mm	Not Qualified	TRUE	.8 V	.0009 mA		e4	NOT SPECIFIED	260	2.9 mm	AUP/ULP/V
SN74AUP1G79DCKR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	220000000 Hz	CMOS	1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP5/6,.08	24 ns	4 Amp	FF/Latches	.65 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	260 MHz	R-PDSO-G5	1	3.6 V	1.1 mm	1.25 mm	Not Qualified	TRUE	.8 V	.0009 mA		e4	NOT SPECIFIED	260	2 mm	AUP/ULP/V
SN74AHC273DGVRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS	8	TR	3.3	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25,16	19.5 ns	8 Amp	FF/Latches	.4 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	5 mm	AHC/VHC/H/U/V
SN74HC273N1	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		CMOS				2/6		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74ACT74NE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	125000000 Hz	CMOS	1	TUBE	5	5	50 pF	IN-LINE	DIP14,.3	13 ns	24 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	125 MHz	R-PDIP-T14		5.5 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V	.02 mA		e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	ACT
SN74HC259N-10	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	1		5		50 pF	IN-LINE		43 ns			2.54 mm	85 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH				19.305 mm	HC/UH
SN74HC175N-00	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	4		5		50 pF	IN-LINE		38 ns			2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V						19.305 mm	HC/UH
SN74LV175ADRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	45000000 Hz	CMOS	4	TR	2.5	3.3	50 pF	SMALL OUTLINE	SOP16,.25	27 ns	6 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G16	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	9.9 mm	LV/LV-A/LVX/H
SN74ACT74PWE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	125000000 Hz	CMOS	1		5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	13 ns	24 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G14	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4	30	260	5 mm	ACT
SN74ABT377DBLE	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS	8	TR	5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	7.3 ns	64 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	150 MHz	R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	30 mA	WITH HOLD MODE		NOT SPECIFIED	NOT SPECIFIED	7.2 mm	ABT
SN74LV174APWTE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	50000000 Hz	CMOS	6	TR	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	23 ns	6 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	5 mm	LV/LV-A/LVX/H
SN74HC4724DWR-00	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	1		5		50 pF	SMALL OUTLINE		43 ns			1.27 mm	85 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH				10.3 mm	HC/UH
SN74LVTH273DBR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS	8	TR	3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	5.5 ns	64 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	3.6 V	2 mm	5.3 mm	Not Qualified	TRUE	2.7 V	5 mA		e4	30	260	7.2 mm	LVT
SN74HC378FN3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	6		CMOS						CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20
SN74HC114DR-00	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	2		5		50 pF	SMALL OUTLINE		44 ns			1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDSO-G14		6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V		WITH INDIVIDUAL SET INPUTS				8.65 mm	HC/UH
SN74ABT273DBRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS	8	TR	5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	7.3 ns	64 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	150 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	30 mA		e4	NOT SPECIFIED	260	7.2 mm	ABT
SN74HC564J	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	8		CMOS				2/6		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-XDIP-T20					Not Qualified
SN74HC7075DW3	Texas Instruments		INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS						SMALL OUTLINE	SOP24,.4			FF/Latches	1.27 mm	85 Cel			-40 Cel		DUAL		R-PDSO-G24
SN74HC109DT	Texas Instruments	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	25000000 Hz	CMOS	2	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	220 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V		DUMMY VAL	e4	30	260	9.9 mm	HC/UH
SN74HC175PWT	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	25000000 Hz	CMOS	4	TR	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	190 ns	4 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	5 mm	HC/UH
SN74AC74DBRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	95000000 Hz	CMOS	1	TR	3	3.3/5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3	16 ns	12 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G14	1	6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	6.2 mm	AC
SN74HC259DTE4	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	165 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	9.9 mm	HC/UH
SN74HCT533NP1	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74HC77D	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	4			2/6	50 pF	SMALL OUTLINE	SOP14,.25		5.2 Amp	FF/Latches	1.27 mm	85 Cel			-40 Cel		DUAL		R-PDSO-G14					Not Qualified
SN74HC74J	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO	2		CMOS				2/6		IN-LINE	DIP14,.3			FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-XDIP-T14					Not Qualified
SN74HC273N-00	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	8		5		50 pF	IN-LINE		40 ns			2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	21 MHz	R-PDIP-T20		6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V						24.325 mm	HC/UH
SN74AUC2G79DCUR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	200000000 Hz	CMOS	1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	3.9 ns	9 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	Matte Tin (Sn)	DUAL	275 MHz	R-PDSO-G8	1	2.7 V	.9 mm	2 mm	Not Qualified	TRUE	.8 V	.01 mA		e3	NOT SPECIFIED	260	2.3 mm	AUC
SN74HCT534JP4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	8		CMOS			5	5		IN-LINE	DIP20,.3		6 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-XDIP-T20
SN74AHC174DBLE	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6	80000000 Hz	CMOS	1	TR	3.3	2/5.5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	16.5 ns	8 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	110 MHz	R-PDSO-G16		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	6.2 mm	AHC
SN74HC109J4	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	2		CMOS				2/6		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-XDIP-T16											NOT SPECIFIED	NOT SPECIFIED
SN74HC4724N	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	8		5		50 pF	IN-LINE	DIP16,.3	43 ns	5.2 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	HC
SN74AUP1G79DRLRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	FLAT	5	VSOF	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	FL6,.047,20	24 ns	1.7 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	260 MHz	R-PDSO-F5	1	3.6 V	.6 mm	1.2 mm	Not Qualified	TRUE	.8 V			e4	30	260	1.6 mm	AUP/ULP/V
SN74AUP1G79YEPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	5	VFBGA	RECTANGULAR	UNSPECIFIED	YES	1		CMOS	1	TR	1.2	1.2/3.3	30 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA5,2X3,20	24 ns	1.7 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		BOTTOM	260 MHz	R-XBGA-B5		3.6 V	.5 mm	.9 mm	Not Qualified	TRUE	.8 V				NOT SPECIFIED	NOT SPECIFIED	1.4 mm	AUP/ULP/V
SN74HCT374NP1	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		CMOS			5	5		IN-LINE	DIP20,.3		6 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74HC107FH	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	2		CMOS				2/6		CHIP CARRIER	LCC20,.35SQ			FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		QUAD		S-XQCC-N20					Not Qualified
SN74HC75J	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	2		CMOS	2			2/6		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	85 Cel			-40 Cel		DUAL		R-XDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74AUP1G80YFPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	6	VFBGA	RECTANGULAR	UNSPECIFIED	YES	1	260000000 Hz	CMOS	1	TR	1.2	1.2/3.3	30 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,16	28.7 ns	4 Amp	FF/Latches	.4 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	260 MHz	R-XBGA-B6	1	3.6 V	.5 mm	.77 mm	Not Qualified	INVERTED	.8 V	.0009 mA		e1	NOT SPECIFIED	260	1.17 mm	AUP/ULP/V
SN74HC75J4	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	2		CMOS	2			2/6		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	85 Cel			-40 Cel		DUAL		R-XDIP-T16
SN74SSTUB32866ZKER	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	1	410000000 Hz	TTL	25		1.8	1.8		GRID ARRAY, LOW PROFILE, FINE PITCH		.8 ns		Other Logic ICs	.8 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN SILVER COPPER	BOTTOM	410 MHz	R-PBGA-B96	3	1.9 V	1.4 mm	5.5 mm	Not Qualified	TRUE	1.7 V			e1	30	260	13.5 mm	SSTU
SN74HC573N	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	8			2/6	50 pF	IN-LINE	DIP20,.3		7.8 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDIP-T20					Not Qualified					e4
SN74HC174FHP4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	6		CMOS				2/6		CHIP CARRIER	LCC20,.35SQ			FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		QUAD		S-XQCC-N20
SN74HCT374DW3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8		CMOS			5	5		SMALL OUTLINE	SOP20,.4		6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G20
SN74HC174NSRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	25000000 Hz	CMOS	6	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.3	200 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V			e4	30	260	10.2 mm	HC/UH
SN74HC259PWLE	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8	TR	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	165 ns	5.2 Amp	FF/Latches	.65 mm	85 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16		6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH		NOT SPECIFIED	NOT SPECIFIED	5 mm	HC/UH

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.