INDUSTRIAL Latches & Flip-Flops 2,400+

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74HC107J	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO	2		CMOS				2/6		IN-LINE	DIP14,.3			FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-XDIP-T14					Not Qualified
SN74HC534NP3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		CMOS				2/6		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T20
SN74AUC2G80DCURE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	200000000 Hz	CMOS	1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	3.9 ns	5 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	275 MHz	R-PDSO-G8	1	2.7 V	.9 mm	2 mm	Not Qualified	INVERTED	.8 V			e4	30	260	2.3 mm	AUC
SN74HC377DW3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8		CMOS				2/6		SMALL OUTLINE	SOP20,.4			FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G20											NOT SPECIFIED	NOT SPECIFIED
SN74LVTH273NSRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS	8	TR	3.3	3.3	50 pF	SMALL OUTLINE	SOP20,.3	5.5 ns	64 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	3.6 V	2 mm	5.3 mm	Not Qualified	TRUE	2.7 V			e4	30	260	12.6 mm	LVT
SN74LVC74DB	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		3.3			SMALL OUTLINE, SHRINK PITCH		6.5 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDSO-G14		3.6 V	2 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V						6.2 mm	LVC/LCX/Z
SN74HC173FH	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	4		CMOS				2/6		CHIP CARRIER	LCC20,.35SQ			FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		QUAD		S-XQCC-N20					Not Qualified
SN74LV273PWLE	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	50000000 Hz	CMOS	8	TR	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	26 ns	12 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDSO-G20		5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2.7 V				NOT SPECIFIED	NOT SPECIFIED	6.5 mm	LV/LV-A/LVX/H
SN74HC375JP4	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	1		CMOS	4			2/6		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	85 Cel			-40 Cel		DUAL		R-XDIP-T16
SN74ABT377APWRE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS	8	TR	5	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	7.3 ns	64 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V	30 mA	WITH HOLD MODE	e4	30	260	6.5 mm	ABT
SN74HC379FN3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	4		CMOS						CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20
SN74AC74NE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	95000000 Hz	CMOS	1	TUBE	3	3.3/5	50 pF	IN-LINE	DIP14,.3	16 ns	24 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	125 MHz	R-PDIP-T14		6 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V	.02 mA		e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	AC
SN74HCT563NP1	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	8		5	5		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDIP-T20					Not Qualified
SN74AUP1G79DRLR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	FLAT	5	VSOF	RECTANGULAR	PLASTIC/EPOXY	YES	1	220000000 Hz	CMOS	1	TR	1.2	1.2/3.3	30 pF	SMALL OUTLINE, VERY THIN PROFILE	FL6,.047,20	24 ns	4 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	260 MHz	R-PDSO-F5	1	3.6 V	.6 mm	1.2 mm	Not Qualified	TRUE	.8 V	.0009 mA		e4	NOT SPECIFIED	260	1.6 mm	AUP/ULP/V
SN74LVC2G79YZPR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	BALL	8	VFBGA	RECTANGULAR	UNSPECIFIED	YES	2	160000000 Hz	CMOS	1	TR	1.8	3.3	50 pF	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA8,2X4,20	9.9 ns	32 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	160 MHz	R-XBGA-B8	1	5.5 V	.5 mm	.9 mm	Not Qualified	TRUE	1.65 V	.005 mA		e1	NOT SPECIFIED	260	1.9 mm	LVC/LCX/Z
SN74HC77DR-00	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		33 ns			1.27 mm	85 Cel		HIGH LEVEL	-40 Cel		DUAL		R-PDSO-G14		6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V						8.65 mm	HC/UH
SN74HC112DG4	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	20000000 Hz	CMOS	2	TUBE	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	155 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	24 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	9.9 mm	HC/UH
SN74AUC1G80DBVR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	200000000 Hz	CMOS	1	TR	1.2	1.2/2.5	15 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	3.9 ns	9 Amp	FF/Latches	.95 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	275 MHz	R-PDSO-G5	1	2.7 V	1.45 mm	1.6 mm	Not Qualified	INVERTED	.8 V	.01 mA		e4	NOT SPECIFIED	260	2.9 mm	AUC
SN74HCT374NP3	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8		CMOS			5	5		IN-LINE	DIP20,.3		6 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T20
SN74HC573J	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	1		CMOS	8			2/6		IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-XDIP-T20					Not Qualified
MM74C173J	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	4000000 Hz	CMOS	4		5	5/15	50 pF	IN-LINE	DIP16,.3	400 ns	.36 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	3 MHz	R-GDIP-T16		15 V	5.08 mm	7.62 mm	Not Qualified	TRUE	3 V		WITH HOLD MODE; WITH DUAL OUTPUT ENABLE	e0				CMOS
SN74HC114N-10	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	2		5		50 pF	IN-LINE		44 ns			2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL	20 MHz	R-PDIP-T14		6 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V		WITH INDIVIDUAL SET INPUTS				19.305 mm	HC/UH
SN74HC114NP3	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS				2/6		IN-LINE	DIP14,.3			FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-PDIP-T14
SN74HC174NP1	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	6		CMOS				2/6		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T16					Not Qualified
SN74LVTH273PWR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS	8	TR	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	5.5 ns	64 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	3.6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2.7 V	5 mA		e4	30	260	6.5 mm	LVT
SN74LV273DBLE	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	50000000 Hz	CMOS	8	TR	3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	26 ns	12 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDSO-G20		5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	2.7 V				NOT SPECIFIED	NOT SPECIFIED	7.2 mm	LV/LV-A/LVX/H
SN74HC75N-10	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS	2		5		50 pF	IN-LINE		33 ns			2.54 mm	85 Cel		HIGH LEVEL	-40 Cel		DUAL		R-PDIP-T16		6 V	5.08 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V						19.305 mm	HC/UH
SN74LV175APWLE	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	45000000 Hz	CMOS	4	TR	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	27 ns	6 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	125 MHz	R-PDSO-G16		5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V				NOT SPECIFIED	NOT SPECIFIED	5 mm	LV/LV-A/LVX/H
SN74LVC1G80DBVTE4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	1	TR	1.8	3.3	50 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	9.9 ns	24 Amp	FF/Latches	.95 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	160 MHz	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	INVERTED	1.65 V			e4	30	260	2.9 mm	LVC/LCX/Z
SN74HC112NP1	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS				2/6		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-PDIP-T16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74AHCT273DGVR	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	45000000 Hz	CMOS	8	TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25,16	11 ns	8 Amp	FF/Latches	.4 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	65 MHz	R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	4.5 V			e4	30	260	5 mm	AHCT/VHCT/VT
SN74HC109FH4	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES	2		CMOS				2/6		CHIP CARRIER	LCC20,.35SQ			FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		QUAD		S-XQCC-N20											NOT SPECIFIED	NOT SPECIFIED
SN74HC379JP4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	4		CMOS						IN-LINE	DIP16,.3			FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-XDIP-T16
SN74HC76JP4	Texas Instruments	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	2		CMOS				2/6		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-XDIP-T16
SN74LV175ADGVRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	45000000 Hz	CMOS	4	TR	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25,16	27 ns	6 Amp	FF/Latches	.4 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	125 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	3.6 mm	Not Qualified	COMPLEMENTARY	2 V			e4	30	260	4.4 mm	LV/LV-A/LVX/H
SN74HC174DG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	25000000 Hz	CMOS	6	TUBE	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	200 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V			e4	30	260	9.9 mm	HC/UH
SN74HC7076DW	Texas Instruments		INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS						SMALL OUTLINE	SOP24,.4			FF/Latches	1.27 mm	85 Cel			-40 Cel		DUAL		R-PDSO-G24					Not Qualified
SN74HC375J	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	1		CMOS	4			2/6		IN-LINE	DIP16,.3			FF/Latches	2.54 mm	85 Cel			-40 Cel		DUAL		R-XDIP-T16					Not Qualified
SN74HC174DT	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	25000000 Hz	CMOS	6	TR	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	200 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	29 MHz	R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V			e4	30	260	9.9 mm	HC/UH
SN74HC377FN	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	8		CMOS				2/6		CHIP CARRIER	LDCC20,.4SQ			FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		QUAD		S-PQCC-J20					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74HC4724DW	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8					SMALL OUTLINE	SOP16,.4			FF/Latches	1.27 mm	85 Cel			-40 Cel		DUAL		R-PDSO-G16					Not Qualified						NOT SPECIFIED	NOT SPECIFIED
SN74HCT573NP3	Texas Instruments	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	8		5	5		IN-LINE	DIP20,.3		6 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDIP-T20
SN74AUC1G74RSER	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	NO LEAD	8	HVQCCN	SQUARE	UNSPECIFIED	YES	1	200000000 Hz	CMOS	1	TR	1.2	1.2/2.5	15 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC8,.06SQ,20	3.8 ns	9 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	275 MHz	S-XQCC-N8	1	2.7 V	.6 mm	1.5 mm	Not Qualified	COMPLEMENTARY	.8 V	.01 mA		e4	30	260	1.5 mm	AUC
SN74LV174APWT	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	50000000 Hz	CMOS	6	TR	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	23 ns	6 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	110 MHz	R-PDSO-G16	1	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4	30	260	5 mm	LV/LV-A/LVX/H
SN74HC259DE4	Texas Instruments	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8	TUBE	5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	165 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		LOW LEVEL	-40 Cel	NICKEL PALLADIUM GOLD	DUAL		R-PDSO-G16	1	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		1:8 DMUX FOLLOWED BY LATCH	e4	30	260	9.9 mm	HC/UH
SN74ABT377ADWG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	BICMOS	8	TUBE	5	5		SMALL OUTLINE	SOP20,.4	7.3 ns	64 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	150 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	30 mA	WITH HOLD MODE	e4	30	260	12.8 mm	ABT
SN74HCT573FN	Texas Instruments	D LATCH	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		CMOS	8		5	5		CHIP CARRIER	LDCC20,.4SQ		6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel		QUAD		S-PQCC-J20					Not Qualified
SN74HC377NSRG4	Texas Instruments	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	20000000 Hz	CMOS	8	TR	5	2/6	50 pF	SMALL OUTLINE	SOP20,.3	200 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	23 MHz	R-PDSO-G20	1	6 V	2 mm	5.3 mm	Not Qualified	TRUE	2 V		WITH HOLD MODE	e4	30	260	12.6 mm	HC/UH

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.