Renesas Electronics Latches & Flip-Flops 947

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
54FCT373TLM	Renesas Electronics	JBAR-KBAR FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC	YES	1		CMOS		8		5	5	50 pF	CHIP CARRIER	LCC20,.35SQ		32 Amp	FF/Latches	1.27 mm	125 Cel	3-STATE		-55 Cel	TIN LEAD	QUAD		S-XQCC-N20					Not Qualified					e0
SSTUAF32866CHLFT	Renesas Electronics	D FLIP-FLOP		BALL	96		RECTANGULAR		PLASTIC/EPOXY	YES	1	410000000 Hz	TTL		25	TR	1.8					3 ns	8 Amp			70 Cel	3-STATE	POSITIVE EDGE	0 Cel	TIN SILVER COPPER	BOTTOM	410 MHz	R-PBGA-B96	3	1.9 V				TRUE	1.7 V	100 mA		e1		260		SSTU
HD74LV273ATELL-E	Renesas Electronics	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	45000000 Hz	CMOS		8	TR	2.5	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	25 ns	6 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G20	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	TRUE	2 V			e4			6.5 mm	LV/LV-A/LVX/H
IDT54FCT373TLM	Renesas Electronics	JBAR-KBAR FLIP-FLOP	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC	YES	1		CMOS		8		5	5	50 pF	CHIP CARRIER	LCC20,.35SQ		32 Amp	FF/Latches	1.27 mm	125 Cel	3-STATE		-55 Cel	TIN LEAD	QUAD		S-XQCC-N20					Not Qualified					e0
HD74HC114FP-EL	Renesas Electronics	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		2		4.5			SMALL OUTLINE		190 ns			1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-PDSO-G14		6 V	2.2 mm	5.5 mm	Not Qualified	COMPLEMENTARY	2 V		WITH INDIVIDUAL SET INPUTS				10.06 mm	HC/UH
HD74AC175ARPVEL	Renesas Electronics	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		4		3.3			SMALL OUTLINE		14.5 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	187 MHz	R-PDSO-G16		6 V	1.75 mm	3.95 mm	Not Qualified	COMPLEMENTARY	2 V						9.9 mm	AC
HD74LS174FP	Renesas Electronics	D FLIP-FLOP	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1	30000000 Hz	TTL		6		5	5		SMALL OUTLINE	SOP16,.3	30 ns	8 Amp	FF/Latches	1.27 mm	75 Cel		POSITIVE EDGE	-20 Cel		DUAL	30 MHz	R-PDSO-G16	1		2.2 mm	5.5 mm	Not Qualified	TRUE		26 mA			20	260	10.06 mm	LS
HD74HC77RPEL	Renesas Electronics	D LATCH	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	2		CMOS		2		4.5	2/6	50 pF	SMALL OUTLINE	SOP14,.25	130 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		HIGH LEVEL	-40 Cel		DUAL		R-PDSO-G14	1	6 V	1.75 mm	3.95 mm	Not Qualified	TRUE	2 V						8.65 mm	HC/UH
HD74AC259FP	Renesas Electronics	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		1		3.3			SMALL OUTLINE		12 ns			1.27 mm	85 Cel		LOW LEVEL	-40 Cel		DUAL	95 MHz	R-PDSO-G16		3.6 V	2.2 mm	5.5 mm	Not Qualified	TRUE	3 V		ALSO OPERATES WITH 5V SUPPLY				10.06 mm	AC
HD74HCT564FPEL-E	Renesas Electronics	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	8	24000000 Hz	CMOS			TR	5	5	50 pF	SMALL OUTLINE	SOP20,.3		6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G20					Not Qualified
HD74LS175P	Renesas Electronics	D FLIP-FLOP	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	1	30000000 Hz	TTL		4		5	5		IN-LINE	DIP16,.3	30 ns	8 Amp	FF/Latches	2.54 mm	75 Cel		POSITIVE EDGE	-20 Cel		DUAL	25 MHz	R-PDIP-T16	1	5.25 V	5.06 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.75 V	18 mA					19.2 mm	LS
74SSTUBF32868ABKG8	Renesas Electronics	D FLIP-FLOP		BALL	176		RECTANGULAR		PLASTIC/EPOXY	YES	1	410000000 Hz	TTL		28	TR	1.8					1.6 ns	6 Amp			70 Cel	OPEN-DRAIN	POSITIVE EDGE	0 Cel	TIN SILVER COPPER	BOTTOM	410 MHz	R-PBGA-B176	3	1.9 V				TRUE	1.7 V	100 mA		e1		260		SSTU
7702601EX	Renesas Electronics	D FLIP-FLOP	MILITARY		20				CERAMIC, METAL-SEALED COFIRED		1		CMOS		4		5			CHIP CARRIER		10 ns				125 Cel		POSITIVE EDGE	-55 Cel		QUAD	95 MHz			5.5 V			Not Qualified	TRUE	4.5 V		FOUR 2:1 MUX FOLLOWED BY REGISTER					ACT
HD14042BFP	Renesas Electronics	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		4		5			SMALL OUTLINE		440 ns			1.27 mm	85 Cel		HIGH LEVEL	-40 Cel		DUAL		R-PDSO-G16		18 V	2.2 mm	5.5 mm	Not Qualified	COMPLEMENTARY	3 V						10.06 mm	4000/14000/40000
HD74SSTV16842T	Renesas Electronics	D FLIP-FLOP	COMMERCIAL	GULL WING	64	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		TTL		11		2.5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.8 ns			.5 mm	70 Cel		POSITIVE EDGE	0 Cel		DUAL		R-PDSO-G64		2.7 V	1.2 mm	6.1 mm	Not Qualified	TRUE	2.3 V						17 mm	SSTV
HD74LS113P	Renesas Electronics	J-K FLIP-FLOP	COMMERCIAL EXTENDED	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	2	30000000 Hz	TTL		2		5	5		IN-LINE	DIP14,.3	30 ns	8 Amp	FF/Latches	2.54 mm	75 Cel		NEGATIVE EDGE	-20 Cel		DUAL	30 MHz	R-PDIP-T14			5.06 mm	7.62 mm	Not Qualified	COMPLEMENTARY		8 mA					19.2 mm	LS
IDT54FCT273AE	Renesas Electronics	JBAR-KBAR FLIP-FLOP	MILITARY	FLAT	20	DFP	RECTANGULAR		CERAMIC	YES	8	83300000 Hz	CMOS				5	5	50 pF	FLATPACK	FL20,.3		32 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL		R-XDFP-F20					Not Qualified					e0
ICSSSTVF16859YKLF-T	Renesas Electronics	D FLIP-FLOP	COMMERCIAL	NO LEAD	56	HVQCCN	SQUARE		UNSPECIFIED	YES	1				13		2.5			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.6 ns			.5 mm	70 Cel		POSITIVE EDGE	0 Cel	MATTE TIN	QUAD	210 MHz	S-XQCC-N56		2.7 V	1 mm	8 mm	Not Qualified	TRUE	2.3 V			e3			8 mm	SSTV
74SSTU32864DBFG	Renesas Electronics	D FLIP-FLOP														TRAY														TIN SILVER COPPER				3									e1		260
RD74LVC74BTELL	Renesas Electronics	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS		1	TR	1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	14.4 ns	24 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G14		5.5 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	1.65 V						5 mm	LVC/LCX/Z
HD74ALVC1G80VSE-E	Renesas Electronics	D FLIP-FLOP	INDUSTRIAL	FLAT	5	VSOF	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		1		1.5			SMALL OUTLINE, VERY THIN PROFILE		8 ns			.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN BISMUTH	DUAL	200 MHz	R-PDSO-F5	1	3.6 V	.6 mm	1.2 mm	Not Qualified	INVERTED	1.2 V			e6			1.6 mm	ALVC/VCX/A
UPD71083C-A	Renesas Electronics	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	1		CMOS		8		5	5	200 pF	IN-LINE	DIP20,.3		12 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel	TIN BISMUTH	DUAL		R-PDIP-T20					Not Qualified			20 mA		e6	10	260
HD74HC73FPEL	Renesas Electronics	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	2	24000000 Hz	CMOS		2	TR	4.5	2/6	50 pF	SMALL OUTLINE	SOP14,.3	190 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-PDSO-G14	1	6 V	2.2 mm	5.5 mm	Not Qualified	COMPLEMENTARY	2 V				20	260	10.06 mm	HC/UH
HD74HC75T	Renesas Electronics	D LATCH	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	2		CMOS		2		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		36 ns			.65 mm	85 Cel		HIGH LEVEL	-40 Cel	TIN LEAD	DUAL		R-PDSO-G16		6 V	1.1 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e0			5 mm	HC/UH
HD74HC76RP-EL	Renesas Electronics	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	2		CMOS		2		4.5			SMALL OUTLINE		190 ns			1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-PDSO-G16		6 V	1.75 mm	3.95 mm	Not Qualified	COMPLEMENTARY	2 V						9.9 mm	HC/UH
HD74LS112	Renesas Electronics	J-K FLIP-FLOP	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC	NO	2	30000000 Hz	TTL				5	5		IN-LINE	DIP16,.3		8 Amp	FF/Latches	2.54 mm	70 Cel		NEGATIVE EDGE	-20 Cel		DUAL		R-XDIP-T16					Not Qualified			8 mA
74FCT377CTSOG	Renesas Electronics	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		8		5	5	50 pF	SMALL OUTLINE	SOP20,.4	5.2 ns	48 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	MATTE TIN	DUAL		R-PDSO-G20	1	5.25 V	2.6416 mm	7.5 mm	Not Qualified	TRUE	4.75 V		WITH HOLD MODE	e3	30	260	12.8 mm	FCT
HD14044BP	Renesas Electronics	R-S LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	1		CMOS		4		5			IN-LINE		350 ns			2.54 mm	85 Cel	3-STATE	LOW LEVEL	-40 Cel		DUAL		R-PDIP-T16		18 V	5.06 mm	7.62 mm	Not Qualified	TRUE	3 V						19.2 mm	4000/14000/40000
HD74LS113FP-EL	Renesas Electronics	J-K FLIP-FLOP	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	2		TTL		2		5			SMALL OUTLINE		30 ns			1.27 mm	75 Cel		NEGATIVE EDGE	-20 Cel		DUAL	30 MHz	R-PDSO-G14			2.2 mm	5.5 mm	Not Qualified	COMPLEMENTARY							10.06 mm	LS
54FCT273CE	Renesas Electronics	JBAR-KBAR FLIP-FLOP	MILITARY	FLAT	20	DFP	RECTANGULAR		CERAMIC	YES	8	83300000 Hz	CMOS				5	5	50 pF	FLATPACK	FL20,.3		32 Amp	FF/Latches	1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	TIN LEAD	DUAL		R-XDFP-F20					Not Qualified					e0
SSTUAF32869AHLFT	Renesas Electronics	D FLIP-FLOP		BALL	150	TFBGA	RECTANGULAR		PLASTIC/EPOXY	YES	1	410000000 Hz			14	TR, 13 INCH	1.8			GRID ARRAY, THIN PROFILE, FINE PITCH	BGA150,11X19,25	2 ns	12 Amp		.65 mm	70 Cel	OPEN-DRAIN	POSITIVE EDGE	0 Cel	TIN SILVER COPPER	BOTTOM		R-PBGA-B150	3	1.9 V	1.2 mm	8 mm		TRUE	1.7 V	100 mA		e1		260	13 mm	32869
ICSSSTUA32866BHMT	Renesas Electronics	D FLIP-FLOP	COMMERCIAL	BALL	96	TFBGA	RECTANGULAR		PLASTIC/EPOXY	YES	1				25		1.8			GRID ARRAY, THIN PROFILE, FINE PITCH		1.9 ns			.65 mm	70 Cel		POSITIVE EDGE	0 Cel	TIN LEAD	BOTTOM	410 MHz	R-PBGA-B96		1.9 V	1.2 mm	5 mm	Not Qualified	TRUE	1.7 V			e0			11.5 mm	SSTU
SSTUA32864BH-T	Renesas Electronics	D FLIP-FLOP
HD74HC112RP	Renesas Electronics	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	2		CMOS		2		4.5			SMALL OUTLINE		190 ns			1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	TIN LEAD	DUAL		R-PDSO-G16		6 V	1.75 mm	3.95 mm	Not Qualified	COMPLEMENTARY	2 V			e0			9.9 mm	HC/UH
ICSSSTU32864YHLFT	Renesas Electronics	D FLIP-FLOP	COMMERCIAL	BALL	96	LFBGA	RECTANGULAR		PLASTIC/EPOXY	YES	1				25		1.8			GRID ARRAY, LOW PROFILE, FINE PITCH		1.85 ns			.8 mm	70 Cel		POSITIVE EDGE	0 Cel	TIN SILVER COPPER	BOTTOM	270 MHz	R-PBGA-B96		1.9 V	1.5 mm	5.5 mm	Not Qualified	TRUE	1.7 V			e1			13.5 mm	SSTU
HD74LV74RP	Renesas Electronics	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	2		CMOS		1					SMALL OUTLINE		22 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDSO-G14		5.5 V	1.75 mm	3.95 mm	Not Qualified	COMPLEMENTARY	2 V						8.65 mm	LV/LV-A/LVX/H
ICSSSTV16859YGLF-T	Renesas Electronics	D FLIP-FLOP	COMMERCIAL	GULL WING	64	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	1				13		2.5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.7 ns			.5 mm	70 Cel		POSITIVE EDGE	0 Cel	MATTE TIN	DUAL	200 MHz	R-PDSO-G64		2.7 V	1.2 mm	6.1 mm	Not Qualified	TRUE	2.3 V			e3			17 mm	SSTV
HD14174BRP	Renesas Electronics	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		6		5			SMALL OUTLINE		420 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	6.5 MHz	R-PDSO-G16		18 V	1.75 mm	3.95 mm	Not Qualified	TRUE	3 V						9.9 mm	4000/14000/40000
HD74HC108FP-EL	Renesas Electronics	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		2		4.5			SMALL OUTLINE		190 ns			1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-PDSO-G14		6 V	2.2 mm	5.5 mm	Not Qualified	COMPLEMENTARY	2 V		WITH INDIVIDUAL SET INPUTS				10.06 mm	HC/UH
74FCT377DTQG	Renesas Electronics	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		8		5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.25	4.4 ns	48 Amp	FF/Latches	.635 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Matte Tin (Sn) - annealed	DUAL		R-PDSO-G20	1	5.25 V	1.7272 mm	3.937 mm	Not Qualified	TRUE	4.75 V		WITH HOLD MODE	e3	30	260	8.6868 mm	FCT
74FCT2574ATQ	Renesas Electronics	D FLIP-FLOP	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	8		CMOS			TUBE	5	5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.25		12 Amp	FF/Latches	.635 mm	70 Cel	3-STATE	POSITIVE EDGE	0 Cel	TIN LEAD	DUAL		R-PDSO-G20	1				Not Qualified	TRUE				e0	20	240		FCT
HD74AC273RPVEL	Renesas Electronics	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		8		3.3			SMALL OUTLINE		14.5 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	125 MHz	R-PDSO-G20		6 V	2.65 mm	7.5 mm	Not Qualified	TRUE	2 V						12.8 mm	AC
HCS109KMSR	Renesas Electronics	J-KBAR FLIP-FLOP	MILITARY	FLAT	16	DFP	RECTANGULAR	100k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	YES	2		CMOS	MIL-PRF-38535 Class V	2		5			FLATPACK		35 ns			1.27 mm	125 Cel		POSITIVE EDGE	-55 Cel	GOLD	DUAL		R-CDFP-F16		5.5 V	2.92 mm	6.73 mm	Not Qualified	COMPLEMENTARY	4.5 V			e4				HC/UH
IDT74LVC162374PF	Renesas Electronics	D FLIP-FLOP	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	16		CMOS				3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.25,16		12 Amp	FF/Latches	.4 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL		R-PDSO-G48	1				Not Qualified					e0	30	240
RD74LVC1G79WPE	Renesas Electronics	D FLIP-FLOP	INDUSTRIAL	BALL	5	VFBGA	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		1		1.8			GRID ARRAY, VERY THIN PROFILE, FINE PITCH		9.9 ns			.4 mm	85 Cel		POSITIVE EDGE	-40 Cel		BOTTOM	160 MHz	R-PBGA-B5		5.5 V	.4 mm	.7 mm	Not Qualified	TRUE	1.65 V						1.1 mm	LVC/LCX/Z
SSTUA32864BHLF-T	Renesas Electronics	D FLIP-FLOP	COMMERCIAL	BALL	96	LFBGA	RECTANGULAR		PLASTIC/EPOXY	YES	1				25		1.8			GRID ARRAY, LOW PROFILE, FINE PITCH		1.9 ns			.8 mm	70 Cel		POSITIVE EDGE	0 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	410 MHz	R-PBGA-B96	3	1.9 V	1.5 mm	5.5 mm	Not Qualified	TRUE	1.7 V			e1	30	260	13.5 mm	SSTU
HD74HC573FPEL-E	Renesas Electronics	D LATCH	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	1		CMOS		8	TR		2/6	50 pF	SMALL OUTLINE	SOP20,.3		6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G20					Not Qualified
74SSTU32864CBF8	Renesas Electronics	D FLIP-FLOP	COMMERCIAL	BALL	96	BGA	RECTANGULAR		PLASTIC/EPOXY	YES	1				25		1.8	1.8		GRID ARRAY	BGA96,6X16,32	2.35 ns		Other Logic ICs	.8 mm	70 Cel		POSITIVE EDGE	0 Cel	TIN LEAD	BOTTOM	340 MHz	R-PBGA-B96	3	1.9 V			Not Qualified	TRUE	1.7 V		14 BIT 1:2 CONFIGURATION ALSO POSSIBLE	e0	30	225		SSTU

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.