Toshiba Latches & Flip-Flops 995

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
TC74HC279AP	Toshiba	R-S LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4		CMOS		2		4.5	2/6	50 pF	IN-LINE	DIP16,.3	165 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDIP-T16		6 V	4.45 mm	7.62 mm	Not Qualified	TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	19.25 mm	HC/UH
TC74HC279AP(F)	Toshiba
TC7WZ74FK,LJ(CT	Toshiba	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1		1.8			SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH		26 ns			.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	162 MHz	R-PDSO-G8		5.5 V	.9 mm	2 mm		COMPLEMENTARY	1.65 V				30	260	2.3 mm	LVC/LCX/Z
TC74HC279AF	Toshiba	R-S LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4		CMOS		2		4.5	2/6	50 pF	SMALL OUTLINE	SOP16,.3	165 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		LOW LEVEL	-40 Cel	TIN LEAD	DUAL		R-PDSO-G16		6 V	1.9 mm	5.3 mm	Not Qualified	TRUE	2 V			e0			10.3 mm	HC/UH
TC74HC279AF(F)	Toshiba
TC7WH74FK,LJ(CT	Toshiba	D FLIP-FLOP	AUTOMOTIVE	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	AEC-Q100	1		3.3			SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH		19.5 ns			.5 mm	125 Cel		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDSO-G8		5.5 V	.9 mm	2 mm		COMPLEMENTARY	2 V						2.3 mm	LV/LV-A/LVX/H
TC74HC74AF(F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	25000000 Hz	CMOS			TUBE		2/6	50 pF	SMALL OUTLINE	SOP14,.3		4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G14	1				Not Qualified						40	260
TC7WH74FU(TE12L,F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	45000000 Hz	CMOS			TR		2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.16		4 Amp	FF/Latches	.635 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G8					Not Qualified
TC7W74FU(TE12L,F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	25000000 Hz	CMOS		1	TR	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.16	190 ns	4 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN SILVER	DUAL	25 MHz	R-PDSO-G8	1	6 V	1.2 mm	2.8 mm	Not Qualified	COMPLEMENTARY	2 V			e2		260	2.9 mm	HC/UH
TC7WH74FU,LJ(CT	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		3.3			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH		17.5 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	110 MHz	R-PDSO-G8		5.5 V	1.3 mm	2.8 mm		COMPLEMENTARY	2 V				NOT SPECIFIED	NOT SPECIFIED	2.9 mm	LV/LV-A/LVX/H
TC7W74FK,LF	Toshiba	D FLIP-FLOP
TC4013BP(N,F)	Toshiba	D FLIP-FLOP
74VHC9273FT	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		20.9 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	115 MHz	R-PDSO-G20		5.5 V	1.2 mm	4.4 mm		TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	6.5 mm	AHC/VHC/H/U/V
TC74AC109P	Toshiba	J-KBAR FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	55000000 Hz	CMOS		2		3.3	3.3/5	50 pF	IN-LINE	DIP16,.3	16 ns	12 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDIP-T16		5.5 V	4.45 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V				NOT SPECIFIED	NOT SPECIFIED	19.25 mm	AC
TC74HC74AF(EL,F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	25000000 Hz	CMOS			TR		2/6	50 pF	SMALL OUTLINE	SOP14,.3		4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G14					Not Qualified
TC7W74FU,LF	Toshiba	D FLIP-FLOP
TC4013BF	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	3500000 Hz	CMOS		1		5	5/15	50 pF	SMALL OUTLINE	SOP14,.3	300 ns	.61 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	12 MHz	R-PDSO-G14		18 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	3 V				NOT SPECIFIED	NOT SPECIFIED	10.3 mm	4000/14000/40000
TC4042BP	Toshiba	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		4		5		50 pF	IN-LINE		440 ns			2.54 mm	85 Cel		HIGH LEVEL	-40 Cel	TIN LEAD	DUAL		R-PDIP-T16		18 V	4.45 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V		PROGRAMMABLE TRIGGER TYPE	e0			19.25 mm	4000/14000/40000
TC74HC74AP(F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2		CMOS		1		5			IN-LINE		190 ns			2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	29 MHz	R-PDIP-T14		6 V	4.45 mm	7.62 mm		COMPLEMENTARY	2 V				NOT SPECIFIED	NOT SPECIFIED	19.25 mm	HC/UH
TC74LCX74F	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		1.8	3.3	50 pF	SMALL OUTLINE	SOP14,.3	22 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	150 MHz	R-PDSO-G14		3.6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	1.65 V	100 mA			NOT SPECIFIED	NOT SPECIFIED	10.3 mm	LVC/LCX/Z
TC74VHC273FT	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS		8		3.3	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	19.5 ns	8 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	100 MHz	R-PDSO-G20		5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			e4			6.5 mm	AHC/VHC
TC74VHC74FT(EL)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS		1	TR	5	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	10.5 ns	8 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	75 MHz	R-PDSO-G14		5.5 V	1.2 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e0			5 mm	AHC/VHC
TC7W74FULF(T	Toshiba	D FLIP-FLOP
TC7WH74FK	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	45000000 Hz	CMOS		1		5	2/5.5	50 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20	17.5 ns	4 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	170 MHz	R-PDSO-G8		5.5 V	.8 mm	2 mm	Not Qualified	COMPLEMENTARY	2 V				NOT SPECIFIED	NOT SPECIFIED	2.3 mm	HC/UH
TC40H076F	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	10000000 Hz	CMOS						15 pF	SMALL OUTLINE	SOP16,.3		1.4 Amp	FF/Latches	1.27 mm	85 Cel		MASTER-SLAVE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G16					Not Qualified					e0
TC4013BFN	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	3500000 Hz	CMOS		1		5	5/15	50 pF	SMALL OUTLINE	SOP14,.25	300 ns	.61 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	12 MHz	R-PDSO-G14		18 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V		NOT AVAILABLE IN JAPAN		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	4000/14000/40000
TC4044BF(EL)	Toshiba	R-S LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4		CMOS		1	TR		5/15	50 pF	SMALL OUTLINE	SOP16,.3		.61 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G16					Not Qualified
TC40H259P	Toshiba	D LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8				15 pF	IN-LINE	DIP16,.3		1.4 Amp	FF/Latches	2.54 mm	85 Cel			-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T16					Not Qualified	TRUE				e0				HC/UH
TC4099BF	Toshiba	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		1		5		50 pF	SMALL OUTLINE		400 ns			1.27 mm	85 Cel		LOW LEVEL	-40 Cel	TIN LEAD	DUAL		R-PDSO-G16		18 V	1.9 mm	5.3 mm	Not Qualified	TRUE	3 V		1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH	e0			10.3 mm	4000/14000/40000
TC40H076AF	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	10000000 Hz	CMOS						15 pF	SMALL OUTLINE	SOP16,.3		1.4 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G16					Not Qualified	COMPLEMENTARY				e0				HC/UH
TC4027BP	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	3500000 Hz	CMOS		2	TUBE	5	5/15	50 pF	IN-LINE	DIP16,.3	300 ns	.61 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	12 MHz	R-PDIP-T16		18 V	4.45 mm	7.62 mm	Not Qualified	COMPLEMENTARY	3 V				NOT SPECIFIED	NOT SPECIFIED	19.25 mm	4000/14000/40000
TC7MH175FK	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	45000000 Hz	CMOS		4		3.3	3.3/5	50 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP20,.16,20	17 ns	4 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	125 MHz	R-PDSO-G16		5.5 V	1 mm	3 mm	Not Qualified	COMPLEMENTARY	2 V			e0			4 mm	LV/LV-A/LVX/H
TC75VHC374FT	Toshiba
TC40H174P	Toshiba	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	6	10000000 Hz	CMOS						15 pF	IN-LINE	DIP16,.3		1.4 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T16					Not Qualified					e0
TC4027BF(EL,F)	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	3500000 Hz	CMOS			TR		5/15	50 pF	SMALL OUTLINE	SOP16,.3		.61 Amp	FF/Latches	1.27 mm	85 Cel		MASTER-SLAVE	-40 Cel		DUAL		R-PDSO-G16					Not Qualified
TC40H373P	Toshiba	D LATCH	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS		8					IN-LINE	DIP20,.3			FF/Latches	2.54 mm	85 Cel	3-STATE		-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T20					Not Qualified					e0
TC4042BFN	Toshiba	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		4		5		50 pF	SMALL OUTLINE		440 ns			1.27 mm	85 Cel		HIGH LEVEL	-40 Cel	TIN COPPER/TIN SILVER	DUAL		R-PDSO-G16		18 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	3 V		PROGRAMMABLE TRIGGER TYPE	e2			9.9 mm	4000/14000/40000
TC40H074F	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	10000000 Hz	CMOS						15 pF	SMALL OUTLINE	SOP14,.3		1.4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G14					Not Qualified	COMPLEMENTARY				e0				HC/UH
TC40H175F	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	10000000 Hz	CMOS		4		5		15 pF	SMALL OUTLINE	SOP16,.3	63 ns	1.4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	10 MHz	R-PDSO-G16		8 V			Not Qualified	COMPLEMENTARY	2 V			e0				40H
TC4027BF(EL)	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	3500000 Hz	CMOS			TR		5/15	50 pF	SMALL OUTLINE	SOP16,.3		.61 Amp	FF/Latches	1.27 mm	85 Cel		MASTER-SLAVE	-40 Cel		DUAL		R-PDSO-G16					Not Qualified
TC40H175P	Toshiba	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	10000000 Hz	CMOS		4		5		15 pF	IN-LINE	DIP16,.3	63 ns	1.4 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	10 MHz	R-PDIP-T16		8 V			Not Qualified	COMPLEMENTARY	2 V			e0				40H
TC7PA175FU(TE85L,F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	100000000 Hz	CMOS			TR		2/3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08		6 Amp	FF/Latches	.635 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G6					Not Qualified
TC7MH273FK	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	45000000 Hz	CMOS		8		3.3	3.3/5		SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP20,.16,20	19.5 ns	4 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	100 MHz	R-PDSO-G20		5.5 V	1 mm	3 mm	Not Qualified	TRUE	2 V			e0			5 mm	LV/LV-A/LVX/H
TC4013BF(EL,N,F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS		1		5			SMALL OUTLINE		300 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	12 MHz	R-PDSO-G14		18 V	1.9 mm	5.3 mm		COMPLEMENTARY	3 V				NOT SPECIFIED	NOT SPECIFIED	10.3 mm	4000/14000/40000
TC40H373F	Toshiba	D LATCH	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		8					SMALL OUTLINE	SOP20,.3			FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20					Not Qualified					e0
74VHC174FT	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS		6		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		16.5 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	130 MHz	R-PDSO-G16		5.5 V	1.2 mm	4.4 mm		TRUE	2 V						5 mm	AHC/VHC/H/U/V
TC40H374P	Toshiba	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8	10000000 Hz	CMOS						50 pF	IN-LINE	DIP20,.3		4.7 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T20					Not Qualified	TRUE				e0				HC/UH
TC4013BF(EL,F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	3500000 Hz	CMOS			TR		5/15	50 pF	SMALL OUTLINE	SOP14,.3		.61 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G14					Not Qualified

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.