Toshiba Latches & Flip-Flops 995

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
TC74ACT174P	Toshiba	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	85000000 Hz	CMOS	6		5	5	50 pF	IN-LINE	DIP16,.3	11.5 ns	24 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	85 MHz	R-PDIP-T16	5.5 V	4.45 mm	7.62 mm	Not Qualified	TRUE	4.5 V			NOT SPECIFIED	NOT SPECIFIED	19.25 mm	ACT
TC74HC279P	Toshiba	R-S LATCH	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4		CMOS	2					IN-LINE		165 ns			2.54 mm	85 Cel		LOW LEVEL	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T16	6 V	5 mm	7.62 mm	Not Qualified	TRUE	2 V	WITH DUAL S INPUT FOR TWO FUNCTIONS	e0			19.43 mm	HC/UH
TC74HC112AF-EL	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		31 ns			1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	TIN LEAD	DUAL	24 MHz	R-PDSO-G16	6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V		e0			10.3 mm	HC/UH
TC74ACT109F(EL)	Toshiba	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		11.4 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	85 MHz	R-PDSO-G16	5.5 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V					10.3 mm	ACT
TC74VCX374FTG(EB2)	Toshiba
TC74HC174P	Toshiba																											TIN LEAD											e0
TC74LVX74FS	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	50000000 Hz	CMOS			3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP14,.25		4 Amp	FF/Latches	.635 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G14				Not Qualified				e0
TC74HC76P	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	24000000 Hz	CMOS				2/6	50 pF	IN-LINE	DIP16,.3		4 Amp	FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T16				Not Qualified				e0
TC7WG74FK(TE85L)	Toshiba
TC74LVQ273FS(EL)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		3.3		50 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH		14.5 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	65 MHz	R-PDSO-G20	3.6 V	1.6 mm	4.4 mm	Not Qualified	TRUE	2 V		e0			6.5 mm	LVQ
TC74HC112AP	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	24000000 Hz	CMOS	2		4.5	2/6	50 pF	IN-LINE	DIP16,.3	155 ns	5.2 Amp	FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL	28 MHz	R-PDIP-T16	6 V	4.45 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V			NOT SPECIFIED	NOT SPECIFIED	19.25 mm	HC/UH
TC74HC107AF(EL,F)	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	25000000 Hz	CMOS		TR		2/6	50 pF	SMALL OUTLINE	SOP14,.3		4 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL		R-PDSO-G14				Not Qualified
TC74HC175AP(F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4	25000000 Hz	CMOS		TUBE		2/6	50 pF	IN-LINE	DIP16,.3		4 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T16				Not Qualified
TC74HC279AF-TP1	Toshiba	R-S LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4		CMOS	2		5		50 pF	SMALL OUTLINE		30 ns			1.27 mm	85 Cel		LOW LEVEL	-40 Cel	TIN LEAD	DUAL		R-PDSO-G16	6 V	1.9 mm	5.3 mm	Not Qualified	TRUE	2 V	WITH DUAL S INPUT FOR TWO FUNCTIONS	e0			10.3 mm	HC/UH
TC74HC273AF	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	24000000 Hz	CMOS	8	TUBE		2/6	50 pF	SMALL OUTLINE	SOP20,.3	180 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	67 MHz	R-PDSO-G20	6 V	1.8 mm	5.3 mm	Not Qualified	TRUE	2 V			NOT SPECIFIED	NOT SPECIFIED	12.8 mm	HC/UH
TC74VHCT374AFK(EL)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	75000000 Hz	CMOS		TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.16,20		8 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G20				Not Qualified
TC74VHC175F(EL,F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4	75000000 Hz	CMOS		TR		2/5.5	50 pF	SMALL OUTLINE	SOP16,.3		8 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G16				Not Qualified
TC74VCXH162373FT(S	Toshiba	D LATCH	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	8		3.3	3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		12 Amp	FF/Latches	.5 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G48				Not Qualified
TC74HC564AF(F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	24000000 Hz	CMOS		TUBE		2/6	50 pF	SMALL OUTLINE	SOP20,.3		6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G20				Not Qualified
TC74HC533F	Toshiba	D LATCH	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8			2/6	50 pF	SMALL OUTLINE	SOP20,.3		6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20				Not Qualified				e0
TC74VHC174F(EL,F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6	80000000 Hz	CMOS		TR		2/5.5	50 pF	SMALL OUTLINE	SOP16,.3		8 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G16				Not Qualified
TC74VHCV373FK(EL)	Toshiba	D LATCH	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8	TR		2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.16,20		16 Amp	FF/Latches	.5 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G20				Not Qualified
TC74HC75F	Toshiba	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2			2/6	50 pF	SMALL OUTLINE	SOP16,.3		4 Amp	FF/Latches	1.27 mm	85 Cel			-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G16				Not Qualified				e0
TC74VCX162843FT(EL)	Toshiba	D LATCH	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	9	TR	3.3	3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		12 Amp	FF/Latches	.5 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G56				Not Qualified	TRUE							ALVC/VCX/A
TC74HC107AF-TP1EL	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		31 ns			1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	TIN COPPER/TIN SILVER	DUAL	25 MHz	R-PDSO-G14	6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V		e2			10.3 mm	HC/UH
TC74VCX162374FT(SP	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16	250000000 Hz	CMOS			3.3	3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		12 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G48				Not Qualified
TC74VHC273FT(EL,M)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		5			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		19.5 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDSO-G20	5.5 V	1.2 mm	4.4 mm		TRUE	2 V					6.5 mm	AHC/VHC/H/U/V
TC74AC174FS	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	6					SMALL OUTLINE, LOW PROFILE, SHRINK PITCH		16.6 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	180 MHz	R-PDSO-G16	5.5 V	1.6 mm	4.4 mm	Not Qualified	TRUE	2 V		e0			5 mm	AC
TC74LVQ174F(ELP)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	6		3.3		50 pF	SMALL OUTLINE		13 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	70 MHz	R-PDSO-G16	3.6 V	1.9 mm	5.3 mm	Not Qualified	TRUE	2 V		e0			10.3 mm	LVQ
TC74VHC74F	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS	1		3.3	2/5.5	50 pF	SMALL OUTLINE	SOP14,.3	17.5 ns	8 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	110 MHz	R-PDSO-G14	5.5 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			NOT SPECIFIED	NOT SPECIFIED	10.3 mm	AHC/VHC
TC74LCX16373FT(EL)	Toshiba	D LATCH	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	8	TR	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		24 Amp	FF/Latches	.5 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G48				Not Qualified
TC74HC375AFN	Toshiba	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2			2/6	50 pF	SMALL OUTLINE	SOP16,.25	150 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		HIGH LEVEL	-40 Cel		DUAL		R-PDSO-G16	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V	NOT AVAILABLE IN JAPAN		NOT SPECIFIED	240	9.9 mm	HC/UH
TC7WT74FU(TE12L,F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	16000000 Hz	CMOS		TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.16		4 Amp	FF/Latches	.635 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G8				Not Qualified
TC74HCT273AFW-TP2	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		5		50 pF	SMALL OUTLINE		38 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G20	5.5 V	2.7 mm	7.5 mm	Not Qualified	TRUE	4.5 V			NOT SPECIFIED	240	12.8 mm	HCT
TC74HC573AF(F)	Toshiba
TC74AC374F(EL,F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	55000000 Hz	CMOS		TR		3.3/5	50 pF	SMALL OUTLINE	SOP20,.3		12 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G20				Not Qualified
TC74HC73AF-TP1	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		31 ns			1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G14	6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			NOT SPECIFIED	240	10.3 mm	HC/UH
TC74ACT574F(F)	Toshiba																																							30	260
TC74AC574F(F)	Toshiba
TC74AC175F(TP1)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	4		5		50 pF	SMALL OUTLINE		10 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	80 MHz	R-PDSO-G16	5.5 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V		e0			10.3 mm	AC
TC74HC76AP	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	25000000 Hz	CMOS	2		5	2/6	50 pF	IN-LINE	DIP16,.3	31 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	25 MHz	R-PDIP-T16	6 V	4.45 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V	MASTER SLAVE OPERATION	e0			19.25 mm	HC/UH
TC74LVQ273FW(ELP)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		3.3		50 pF	SMALL OUTLINE		14.5 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	65 MHz	R-PDSO-G20	3.6 V	2.7 mm	7.5 mm	Not Qualified	TRUE	2 V			NOT SPECIFIED	240	12.8 mm	LVQ
TC74VHC273FW	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS	8		3.3	2/5.5	50 pF	SMALL OUTLINE	SOP20,.4	19.5 ns	8 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	100 MHz	R-PDSO-G20	5.5 V	2.7 mm	7.5 mm	Not Qualified	TRUE	2 V	NOT AVAILABLE IN JAPAN	e0			12.8 mm	AHC/VHC
TC74HC74AFN	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	25000000 Hz	CMOS	1		4.5	2/6	50 pF	SMALL OUTLINE	SOP14,.25	190 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	29 MHz	R-PDSO-G14	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V	NOT AVAILABLE IN JAPAN	e0			8.65 mm	HC/UH
TC74HC377AFW	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	29000000 Hz	CMOS	8			2/6	50 pF	SMALL OUTLINE	SOP20,.4	175 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	77 MHz	R-PDSO-G20	6 V	2.7 mm	7.5 mm	Not Qualified	TRUE	2 V	NOT AVAILABLE IN JAPAN	e0			12.8 mm	HC/UH
TC74HC107AF	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	25000000 Hz	CMOS	2			2/6	50 pF	SMALL OUTLINE	SOP14,.3	155 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	TIN LEAD	DUAL	80 MHz	R-PDSO-G14	6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V		e0			10.3 mm	HC/UH
TC74VCX374FK(EL)	Toshiba
TC74HC573AFN	Toshiba	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8			2/6	50 pF	SMALL OUTLINE	SOP16,.25		4 Amp	FF/Latches	1.27 mm	85 Cel			-40 Cel		DUAL		R-PDSO-G16				Not Qualified

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.