Toshiba Latches & Flip-Flops 995

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
TC74ACT174F(TP2)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	6		5		50 pF	SMALL OUTLINE		11.5 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	85 MHz	R-PDSO-G16	5.5 V	1.9 mm	5.3 mm	Not Qualified	TRUE	4.5 V		e0			10.3 mm	ACT
TC74VCX16843FT(EL)	Toshiba	D LATCH	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	9	TR	3.3	3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		24 Amp	FF/Latches	.5 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G56				Not Qualified
TC74HC77P	Toshiba	D LATCH	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	4			2/6	50 pF	IN-LINE	DIP14,.3		4 Amp	FF/Latches	2.54 mm	85 Cel			-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T14				Not Qualified				e0
TC74HC175AF-TP1EL	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	4		5		50 pF	SMALL OUTLINE		35 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	25 MHz	R-PDSO-G16	6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V		e0			10.3 mm	HC/UH
TC74HCT374P	Toshiba																											TIN LEAD											e0
TC74AC377F(TP1)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		5		50 pF	SMALL OUTLINE		12 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	80 MHz	R-PDSO-G20	5.5 V	1.8 mm	5.3 mm	Not Qualified	TRUE	2 V	WITH HOLD MODE; 50 OHM LINE DRIVE CAPABILITY FOR < = 10MS ONE O/P AT A TIME				12.8 mm	AC
TC74HC109AF-TP2EL	Toshiba	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		38 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDSO-G16	6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V					10.3 mm	HC/UH
TC74HC534F	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	24000000 Hz	CMOS				2/6	50 pF	SMALL OUTLINE	SOP20,.3		6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20				Not Qualified				e0
TC74VCX16721FT(EL)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	20	250000000 Hz	CMOS		TR	3.3	3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		24 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G56				Not Qualified	TRUE							ALVC/VCX/A
TC74VCX2573FK(EL)	Toshiba
TC74ACT374FT(EL)	Toshiba
TC74VCXH16374FT(EL)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16	250000000 Hz	CMOS		TR	3.3	3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		24 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G48				Not Qualified
TC74AC377F(EL,F)	Toshiba
TC74LCX273FK(EL)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	150000000 Hz	CMOS		TR	3.3	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.16,20		24 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G20				Not Qualified
TC74HC175AF(EL,F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4	25000000 Hz	CMOS		TR		2/6	50 pF	SMALL OUTLINE	SOP16,.3		4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G16				Not Qualified
TC74ACT175FN	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	80000000 Hz	CMOS	4		5	5	50 pF	SMALL OUTLINE	SOP16,.25	12.5 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	80 MHz	R-PDSO-G16	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V	NOT AVAILABLE IN JAPAN		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	ACT
TC74HC259AF-EL	Toshiba	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	1		5		50 pF	SMALL OUTLINE		41 ns			1.27 mm	85 Cel		LOW LEVEL	-40 Cel	TIN LEAD	DUAL		R-PDSO-G16	6 V	1.9 mm	5.3 mm	Not Qualified	TRUE	2 V	1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH	e0			10.3 mm	HC/UH
TC74HC73AF	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	24000000 Hz	CMOS	2		5	2/6	50 pF	SMALL OUTLINE	SOP14,.3	31 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	24 MHz	R-PDSO-G14	6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V	MASTER SLAVE OPERATION	e0			10.3 mm	HC/UH
TC74VCX574FK(EL)	Toshiba
TC74LCX573F(F)	Toshiba	D LATCH	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8	TUBE	3.3	3.3	50 pF	SMALL OUTLINE	SOP20,.3		24 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G20				Not Qualified
TC74LCX74FW	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1					SMALL OUTLINE		8 ns				85 Cel		POSITIVE EDGE	-40 Cel		DUAL	150 MHz	R-PDSO-G14	3.6 V			Not Qualified	COMPLEMENTARY	2 V			NOT SPECIFIED	240		LVC/LCX/Z
TC74LVX74F(ELP)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		3.3		50 pF	SMALL OUTLINE		15 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	50 MHz	R-PDSO-G14	3.6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V		e0			10.3 mm	LV/LV-A/LVX/H
TC74VHC74F(EL)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		5		50 pF	SMALL OUTLINE		10.5 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	75 MHz	R-PDSO-G14	5.5 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V		e0			10.3 mm	AHC/VHC
TC74HC375AF-TP2	Toshiba	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		30 ns			1.27 mm	85 Cel		HIGH LEVEL	-40 Cel	TIN LEAD	DUAL		R-PDSO-G16	6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V		e0			10.3 mm	HC/UH
TC74VHC273FT(EL)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS	8	TR	5	2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	12.5 ns	8 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	70 MHz	R-PDSO-G20	5.5 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V			NOT SPECIFIED	NOT SPECIFIED	6.5 mm	AHC/VHC
TC74AC174F(TP2)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	6		5		50 pF	SMALL OUTLINE		11 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	90 MHz	R-PDSO-G16	5.5 V	1.9 mm	5.3 mm	Not Qualified	TRUE	2 V		e0			10.3 mm	AC
TC74AC74FN	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	60000000 Hz	CMOS	1		3.3	3.3/5	50 pF	SMALL OUTLINE	SOP14,.25	16 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDSO-G14	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V	NOT AVAILABLE IN JAPAN		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	AC
TC7W74FKTE12L	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	1		5			SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH		190 ns			.5 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	29 MHz	R-PDSO-G8	6 V	.9 mm	2 mm	Not Qualified	COMPLEMENTARY	2 V					2.3 mm	HC/UH
TC74AC109F(EL)	Toshiba	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		10 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	100 MHz	R-PDSO-G16	5.5 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V		e0			10.3 mm	AC
TC74AC377P(F)	Toshiba
TC74HCT373AF(F)	Toshiba
TC74VHC175FK	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	75000000 Hz	CMOS	4		3.3	2/5.5	50 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH		17 ns	8 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	125 MHz	R-PDSO-G16	5.5 V	1 mm	3 mm	Not Qualified	COMPLEMENTARY	2 V					4 mm	AHC/VHC/H/U/V
TC74HCT174AP(F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	6	24000000 Hz	CMOS		TUBE	5	5	50 pF	IN-LINE	DIP16,.3		4 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T16				Not Qualified
TC74VHCV573FT(EL)	Toshiba	D LATCH	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8	TR		2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		16 Amp	FF/Latches	.635 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G20				Not Qualified
TC74AC109FN	Toshiba	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	55000000 Hz	CMOS	2		3.3	3.3/5	50 pF	SMALL OUTLINE	SOP16,.25	16 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDSO-G16	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V	NOT AVAILABLE IN JAPAN		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AC
TC74HC107AP	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	25000000 Hz	CMOS	2			2/6	50 pF	IN-LINE	DIP14,.3	155 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL	80 MHz	R-PDIP-T14	6 V	4.45 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V			NOT SPECIFIED	NOT SPECIFIED	19.25 mm	HC/UH
TC74VHCV573FK	Toshiba	D LATCH	INDUSTRIAL	GULL WING	20	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		2.3			SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH		23.5 ns			.5 mm	85 Cel	3-STATE	LOW LEVEL	-40 Cel		DUAL		R-PDSO-G20	5.5 V	1 mm	3 mm	Not Qualified	TRUE	1.8 V			NOT SPECIFIED	NOT SPECIFIED		AHC/VHC/H/U/V
TC74LVX174FN	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	55000000 Hz	CMOS	6		2.7	3.3	50 pF	SMALL OUTLINE	SOP16,.25	21 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	95 MHz	R-PDSO-G16	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V	NOT AVAILABLE IN JAPAN		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	LV/LV-A/LVX/H
TC74LCX74F(EL,F)	Toshiba	JBAR-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS			3.3	3.3	50 pF	SMALL OUTLINE	SOP14,.3		24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G14				Not Qualified
TC74HC259AF-TP2EL	Toshiba	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	1		5		50 pF	SMALL OUTLINE		41 ns			1.27 mm	85 Cel		LOW LEVEL	-40 Cel		DUAL		R-PDSO-G16	6 V	1.9 mm	5.3 mm	Not Qualified	TRUE	2 V	1:8 DMUX FOLLOWED BY LATCH; RESET ACTIVE ONLY WHEN LATCH ENABLE IS HIGH				10.3 mm	HC/UH
TC74HCT74AP(F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	22000000 Hz	CMOS		TUBE	5	5	50 pF	IN-LINE	DIP14,.3		4 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T14				Not Qualified
TC74HC113AF(TP1)	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		31 ns			1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL	32 MHz	R-PDSO-G14	6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			NOT SPECIFIED	NOT SPECIFIED	10.3 mm	HC/UH
TC74HC73AP	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	24000000 Hz	CMOS	2		5	2/6	50 pF	IN-LINE	DIP14,.3	31 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		NEGATIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	24 MHz	R-PDIP-T14	6 V	4.45 mm	7.62 mm	Not Qualified	COMPLEMENTARY	2 V	MASTER SLAVE OPERATION	e0			19.25 mm	HC/UH
TC74LVX373FS	Toshiba	D LATCH	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.25		4 Amp	FF/Latches	.635 mm	85 Cel	3-STATE		-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20				Not Qualified				e0
TC74VCXH162373FT(E	Toshiba	D LATCH	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	8		3.3	3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		12 Amp	FF/Latches	.5 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G48				Not Qualified
TC74VHC373FS(EL)	Toshiba	D LATCH	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8	TR		2/5.5	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.25		8 Amp	FF/Latches	.635 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G20				Not Qualified
TC74HC74AFN-TP1	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		5		50 pF	SMALL OUTLINE		38 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDSO-G14	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V			NOT SPECIFIED	240	8.65 mm	HC/UH
TC74HC175F	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4	24000000 Hz	CMOS				2/6	50 pF	SMALL OUTLINE	SOP16,.3		4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G16				Not Qualified				e0

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.