12 Multiplexers & Switches 198

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
TS3DS26227YZPR	Texas Instruments	SPDT		12		RECTANGULAR	YES	UNSPECIFIED						BALL					GRID ARRAY							BOTTOM	R-XBGA-B12							Not Qualified
TS5A26542YZTR	Texas Instruments	SPDT	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	UNSPECIFIED	.0005 mA	2	2		43 kHz	BALL			2.5 V	2.5/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA12,3X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-XBGA-B12	SEPARATE OUTPUT	1	5.5 V	.625 mm		1.37 mm	Not Qualified		63 dB	2.25 V	IT CAN ALSO OPERATE WITH 4.5V TO 5.5V	0 V		e1	BREAK-BEFORE-MAKE	30	260	35 ns	1.6 ohm	20 ns	.15 ohm	1.87 mm	5.5 V
LMS4684ITLX	Texas Instruments	SPDT	INDUSTRIAL	12	BGA	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		BALL			2.7 V	3	GRID ARRAY	BGA12,3X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Tin/Lead (Sn63Pb37)	BOTTOM	R-PBGA-B12	SEPARATE OUTPUT	1	5.5 V				Not Qualified	NO/NC		1.8 V				e0	BREAK-BEFORE-MAKE	40	260	65 ns	.8 ohm	40 ns	.06 ohm
TS3USB221ZXUR	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			BALL			3.3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel		BOTTOM	S-PBGA-B12			3.6 V	.61 mm		2 mm	Not Qualified		41 dB	2.3 V								30 ns	6 ohm	12 ns	.2 ohm	2.5 mm
MAX20334EWC+T	Analog Devices	DPST	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	BICMOS		BALL			4.3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	-40 Cel	TIN SILVER COPPER NICKEL	BOTTOM	R-PBGA-B12		1	5.5 V	.69 mm		1.228 mm			95 dB	2.7 V				e2		30	260	120000 ns	8 ohm	10000 ns	.2 ohm	1.628 mm
DG387C/D	Analog Devices	SPDT	COMMERCIAL	12	DIE	RECTANGULAR	YES	UNSPECIFIED		1	1	CMOS		NO LEAD	-18 V	-15 V	15 V	+-15	UNCASED CHIP	DIE OR CHIP	Multiplexer or Switches		70 Cel	0 Cel	TIN LEAD	UPPER	R-XUUC-N12			18 V				Not Qualified		62 dB	5 V			-5 V	e0	BREAK-BEFORE-MAKE			300 ns	50 ohm	250 ns
DG381C/D	Analog Devices	SPST	COMMERCIAL	12	DIE	RECTANGULAR	YES	UNSPECIFIED		2	1	CMOS		NO LEAD	-18 V	-15 V	15 V	+-15	UNCASED CHIP	DIE OR CHIP	Multiplexer or Switches		70 Cel	0 Cel	TIN LEAD	UPPER	R-XUUC-N12	SEPARATE OUTPUT		18 V				Not Qualified	NC	62 dB	5 V			-5 V	e0	BREAK-BEFORE-MAKE			300 ns	50 ohm	250 ns
ADG1236YCP	Analog Devices	SPDT	AUTOMOTIVE	12	HVQCCN	SQUARE	YES	UNSPECIFIED		1	1	CMOS		NO LEAD	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N12	SEPARATE OUTPUT		16.5 V	.8 mm		3 mm	Not Qualified		75 dB	13.5 V			-13.5 V	e0	BREAK-BEFORE-MAKE				120 ohm		5 ohm	3 mm
ADG836YCP-REEL	Analog Devices	SPDT	AUTOMOTIVE	12	HVQCCN	SQUARE	YES	UNSPECIFIED		2	2	CMOS		NO LEAD			1.8 V	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N12	SEPARATE OUTPUT	3	1.95 V	1 mm		3 mm	Not Qualified	NO/NC	67 dB	1.65 V	CAN ALSO OPERATE WITH 2.5V AND 3.3V SUPPLIES			e0	BREAK-BEFORE-MAKE		240	37 ns	1.4 ohm	9 ns	.1 ohm	3 mm
DG300C/D	Analog Devices	SPST	COMMERCIAL	12	DIE	SQUARE	YES	UNSPECIFIED		2	1	CMOS		NO LEAD	-18 V	-15 V	15 V	+-15	UNCASED CHIP	DIE OR CHIP	Multiplexer or Switches		70 Cel	0 Cel	TIN LEAD	UPPER	S-XUUC-N12	SEPARATE OUTPUT		18 V				Not Qualified	NO	62 dB	5 V			-5 V	e0	BREAK-BEFORE-MAKE			300 ns	50 ohm	250 ns
MAX4684EBC+	Analog Devices	SPDT	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		2	1			BALL			3 V	3	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA12,3X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B12	SEPARATE OUTPUT	1	5.5 V	.65 mm		1.52 mm	Not Qualified		64 dB	1.8 V				e1	BREAK-BEFORE-MAKE	30	260	50 ns	.8 ohm	30 ns	.06 ohm	2.02 mm
MAX4736EGC+T	Analog Devices	SPDT	INDUSTRIAL	12	VQCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED		2	1	CMOS		NO LEAD			1.8 V	1.8/3	CHIP CARRIER, VERY THIN PROFILE	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-CQCC-N12	SEPARATE OUTPUT	1	3.6 V	1 mm		3 mm	Not Qualified		52 dB	1.6 V				e3	BREAK-BEFORE-MAKE	30	260	30 ns	2 ohm	25 ns		3 mm
DG305C/D	Analog Devices	SPDT	COMMERCIAL	12	DIE	RECTANGULAR	YES	UNSPECIFIED		1	1	CMOS		NO LEAD	-18 V	-15 V	15 V	+-15	UNCASED CHIP	DIE OR CHIP	Multiplexer or Switches		70 Cel	0 Cel	TIN LEAD	UPPER	R-XUUC-N12			18 V				Not Qualified		62 dB	5 V			-5 V	e0	BREAK-BEFORE-MAKE			250 ns	50 ohm	150 ns
MAX4736EGC+	Analog Devices	SPDT	INDUSTRIAL	12	VQCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED		2	1	CMOS		NO LEAD			1.8 V	1.8/3	CHIP CARRIER, VERY THIN PROFILE	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-CQCC-N12	SEPARATE OUTPUT	1	3.6 V	1 mm		3 mm	Not Qualified		52 dB	1.6 V				e3	BREAK-BEFORE-MAKE	30	260	30 ns	2 ohm	25 ns		3 mm
MAX4932EWC+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		2	3	BICMOS		BALL			3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B12		1	5.5 V	.69 mm		1.55 mm			80 dB	1.8 V				e1		30	260		.75 ohm		.1 ohm	2.035 mm
MAX4932EWC+	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		2	3	BICMOS		BALL			3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B12		1	5.5 V	.69 mm		1.517 mm			80 dB	1.8 V				e1		30	260		.75 ohm		.1 ohm	2 mm
MAX4695EGC+T	Analog Devices	SPDT	INDUSTRIAL	12	VQCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED		1	1			NO LEAD			3 V		CHIP CARRIER, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-CQCC-N12		1	3.3 V	1 mm		3 mm	Not Qualified		75 dB	2.7 V				e3		30	260	30 ns	60 ohm	18 ns	3 ohm	3 mm
MAX4734ETC+	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	12	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		NO LEAD			1.8 V	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N12		1	3.6 V	.8 mm	.15 A	3 mm	Not Qualified		56 dB	1.6 V				e3	BREAK-BEFORE-MAKE	30	260	30 ns	2 ohm	25 ns		3 mm
MAX4736ETC+	Analog Devices	SPDT	INDUSTRIAL	12	HVQCCN	SQUARE	YES	UNSPECIFIED		2	1	CMOS		NO LEAD			3 V	1.8/3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N12	SEPARATE OUTPUT	1	3.6 V	.9 mm		3 mm	Not Qualified		52 dB	1.6 V				e3	BREAK-BEFORE-MAKE	30	260	25 ns	.8 ohm	20 ns	.1 ohm	3 mm
ADG836YCPZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	12	HVQCCN	SQUARE	YES	UNSPECIFIED		2	2	CMOS		NO LEAD			1.8 V	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N12	SEPARATE OUTPUT	3	1.95 V	1 mm		3 mm	Not Qualified		67 dB	1.65 V	CAN ALSO OPERATE WITH 2.5V AND 3.3V SUPPLIES			e3	BREAK-BEFORE-MAKE		260	37 ns	1.4 ohm	9 ns	.1 ohm	3 mm
ADG1204YCP	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	12	HVQCCN	RECTANGULAR	YES	UNSPECIFIED	.3 mA	1	4	CMOS		NO LEAD	-5.5 V	-5 V	5 V	+-15/+12/+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN LEAD	QUAD	R-XQCC-N12			5.5 V	1 mm	.03 A	3 mm	Not Qualified		56 dB	4.5 V	ALSO OPERATES AT +12 V AND +/-15 V SUPPLY		-4.5 V	e0	BREAK-BEFORE-MAKE			160 ns	220 ohm		10 ohm	3 mm
ADG836YCP-REEL7	Analog Devices	SPDT	AUTOMOTIVE	12	HVQCCN	SQUARE	YES	UNSPECIFIED		2	2	CMOS		NO LEAD			1.8 V	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N12	SEPARATE OUTPUT	3	1.95 V	1 mm		3 mm	Not Qualified	NO/NC	67 dB	1.65 V	CAN ALSO OPERATE WITH 2.5V AND 3.3V SUPPLIES			e0	BREAK-BEFORE-MAKE		240	37 ns	1.4 ohm	9 ns	.1 ohm	3 mm
ADG836YCP	Analog Devices	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	12	HVQCCN	SQUARE	YES	UNSPECIFIED		2	2	CMOS		NO LEAD			1.8 V	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N12	SEPARATE OUTPUT		1.95 V	1 mm		3 mm	Not Qualified	NO/NC	67 dB	1.65 V	CAN ALSO OPERATE WITH 2.5V AND 3.3V SUPPLIES			e0	BREAK-BEFORE-MAKE			37 ns	1.4 ohm	9 ns	.1 ohm	3 mm
DG304C/D	Analog Devices	SPST	COMMERCIAL	12	DIE	RECTANGULAR	YES	UNSPECIFIED		2	1	CMOS		NO LEAD	-18 V	-15 V	15 V	+-15	UNCASED CHIP	DIE OR CHIP	Multiplexer or Switches		70 Cel	0 Cel	TIN LEAD	UPPER	R-XUUC-N12	SEPARATE OUTPUT		18 V				Not Qualified	NO	62 dB	5 V			-5 V	e0	BREAK-BEFORE-MAKE			250 ns	50 ohm	150 ns
MAX4909EWC+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		2	3	BICMOS		BALL			3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel		BOTTOM	R-PBGA-B12			5.5 V	.69 mm		1.55 mm			80 dB	1.8 V						NOT SPECIFIED	NOT SPECIFIED		.75 ohm		.1 ohm	2.035 mm
MAX4734ETC	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	12	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	4	CMOS		NO LEAD			1.8 V	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-N12		1	3.6 V	.8 mm	.15 A	3 mm	Not Qualified		56 dB	1.6 V				e0	BREAK-BEFORE-MAKE		245	30 ns	2 ohm	25 ns		3 mm
MAX14505EWC+	Analog Devices	SPDT	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		BALL			3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel		BOTTOM	R-PBGA-B12			5.5 V	.69 mm		1.55 mm			84 dB	2.3 V						NOT SPECIFIED	NOT SPECIFIED	60000000 ns	.5 ohm	3000 ns	.01 ohm	2.135 mm
DG301C/D	Analog Devices	SPDT	COMMERCIAL	12	DIE	SQUARE	YES	UNSPECIFIED		1	1	CMOS		NO LEAD	-18 V	-15 V	15 V	+-15	UNCASED CHIP	DIE OR CHIP	Multiplexer or Switches		70 Cel	0 Cel	TIN LEAD	UPPER	S-XUUC-N12			18 V				Not Qualified		62 dB	5 V			-5 V	e0	BREAK-BEFORE-MAKE			300 ns	50 ohm	250 ns
MAX4704EGC+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	12	VQCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED	.001 mA	1	4	CMOS		NO LEAD			3 V	3/5	CHIP CARRIER, VERY THIN PROFILE	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-CQCC-N12		1	3.3 V	1 mm		3 mm	Not Qualified		85 dB	2.7 V				e3	BREAK-BEFORE-MAKE	30	260	60 ns	60 ohm	20 ns	1 ohm	3 mm
MAX4762EBC+T	Analog Devices	SPDT	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	BICMOS		BALL			3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B12		1	5.5 V	.67 mm		1.54 mm	Not Qualified		65 dB	1.8 V				e1		30	260	80 ns	.85 ohm	70 ns	.05 ohm	2.02 mm
MAX4695ETC+	Analog Devices	SPDT	INDUSTRIAL	12	HVQCCN	SQUARE	YES	UNSPECIFIED		1	1			NO LEAD			3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N12		1	3.3 V	.8 mm		3 mm	Not Qualified		75 dB	2.7 V				e3		30	260	30 ns	60 ohm	18 ns	3 ohm	3 mm
MAX4717EBC+T	Analog Devices	SPDT	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	UNSPECIFIED		2	1	BICMOS		BALL			3 V	3/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA12,3X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-XBGA-B12	SEPARATE OUTPUT	1	5.5 V	.67 mm		1.54 mm	Not Qualified		55 dB	1.8 V				e1	BREAK-BEFORE-MAKE	30	260	80 ns	4.5 ohm	40 ns	.1 ohm	2.02 mm
MAX4734ETC+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	12	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		1	4	CMOS		NO LEAD			1.8 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N12		1	3.6 V	.8 mm		3 mm	Not Qualified		56 dB	1.6 V				e3		30	260	30 ns	2 ohm	25 ns		3 mm
MAX14506EWC+	Analog Devices	SPDT	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		BALL			3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B12		1	5.5 V	.69 mm		1.55 mm			84 dB	2.3 V				e1		30	260	60000000 ns	.5 ohm	3000 ns	.01 ohm	2.135 mm
MAX4736ETC+T	Analog Devices	SPDT	INDUSTRIAL	12	HVQCCN	SQUARE	YES	UNSPECIFIED		2	1	CMOS		NO LEAD			3 V	1.8/3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N12	SEPARATE OUTPUT	1	3.6 V	.9 mm		3 mm	Not Qualified		52 dB	1.6 V				e3	BREAK-BEFORE-MAKE	30	260	25 ns	.8 ohm	20 ns	.1 ohm	3 mm
MAX14531EEWC+	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	12	BGA	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	BICMOS		BALL			3 V		GRID ARRAY				85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B12		1	5.5 V						65 dB	2.7 V				e1		30	260	250000 ns	3 ohm	6000 ns
MAX4695ETC+T	Analog Devices	SPDT	INDUSTRIAL	12	HVQCCN	SQUARE	YES	UNSPECIFIED		1	1			NO LEAD			3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N12		1	3.3 V	.8 mm		3 mm	Not Qualified		75 dB	2.7 V				e3		30	260	30 ns	60 ohm	18 ns	3 ohm	3 mm
MAX4908EWC+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		2	3	BICMOS		BALL			3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B12		1	5.5 V	.69 mm		1.55 mm			80 dB	1.8 V				e1		30	260		.75 ohm		.1 ohm	2.035 mm
MAX4930EWC+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		2	3	BICMOS		BALL			3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel		BOTTOM	R-PBGA-B12			5.5 V	.69 mm		1.55 mm			80 dB	1.8 V						NOT SPECIFIED	NOT SPECIFIED		.75 ohm		.1 ohm	2.035 mm
MAX4704EGC+	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	12	VQCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED	.001 mA	1	4	CMOS		NO LEAD			3 V	3/5	CHIP CARRIER, VERY THIN PROFILE	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-CQCC-N12		1	3.3 V	1 mm	.02 A	3 mm	Not Qualified		85 dB	2.7 V				e3	BREAK-BEFORE-MAKE	30	260	60 ns	60 ohm	20 ns	1 ohm	3 mm
MAX4695EGC+	Analog Devices	SPDT	INDUSTRIAL	12	VQCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED		1	1	CMOS		NO LEAD			3 V	3/5	CHIP CARRIER, VERY THIN PROFILE	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-CQCC-N12	SEPARATE OUTPUT	1	3.3 V	1 mm		3 mm	Not Qualified		75 dB	2.7 V				e3	BREAK-BEFORE-MAKE	30	260	30 ns	60 ohm	18 ns	3 ohm	3 mm
MAX14533EEWC+	Analog Devices	AUDIO/VIDEO SWITCH	INDUSTRIAL	12	BGA	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	BICMOS		BALL			3 V		GRID ARRAY				85 Cel	-40 Cel		BOTTOM	R-PBGA-B12			5.5 V						65 dB	2.7 V						NOT SPECIFIED	NOT SPECIFIED	250000 ns	3 ohm	6000 ns
MAX4684EBC+T	Analog Devices	SPDT	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	BICMOS		BALL			3 V	3	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA12,3X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B12	SEPARATE OUTPUT	1	3.3 V	.67 mm		1.54 mm	Not Qualified		64 dB	2.7 V				e1	BREAK-BEFORE-MAKE	30	260	60 ns	.8 ohm	40 ns	.06 ohm	2.02 mm
MAX4717EBC+	Analog Devices	SPDT	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	UNSPECIFIED		2	1	BICMOS		BALL			3 V	3/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA12,3X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-XBGA-B12	SEPARATE OUTPUT	1	5.5 V	.67 mm		1.54 mm	Not Qualified		55 dB	1.8 V				e1	BREAK-BEFORE-MAKE	30	260	80 ns	4.5 ohm	40 ns	.1 ohm	2.02 mm
MAX14504EWC+	Analog Devices	SPDT	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		BALL			3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B12		1	5.5 V	.69 mm		1.55 mm			84 dB	2.3 V				e1		30	260	60000000 ns	.5 ohm	3000 ns	.01 ohm	2.135 mm
NCP374MU075TXG	Onsemi	SPST	INDUSTRIAL	12	SON	RECTANGULAR	YES	PLASTIC/EPOXY	.315 mA					NO LEAD			5 V	5	SMALL OUTLINE	SOLCC12,.16,20	Power Management Circuits	.5 mm	85 Cel	-40 Cel	TIN	DUAL	R-PDSO-N12		1					Not Qualified							e3		30	260
FTL11639UCX	Onsemi	SPST	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			BALL			4.5 V	1.5/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA12,3X4,16	Analog Waveform Generation Functions	.4 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B12		1	5.5 V	.625 mm		1.31 mm	Not Qualified			1.2 V				e1		30	260		.1 ohm			1.615 mm
NCP45540IMNTWG-L	Onsemi	SPST	INDUSTRIAL	12	HVSON	SQUARE	YES	PLASTIC/EPOXY	.75 mA	1	1			NO LEAD			3.3 V	3.3/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC12,.12,20	Power Management Circuits	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-N12		3	5.5 V	1 mm		3 mm	Not Qualified			3 V				e3		30	260		.0077 ohm			3 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.