6 Multiplexers & Switches 639

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	No. of Functions	No. of Channels	Technology	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length
ADG802BRTZ-REEL	Analog Devices	SPST	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm	1.6 mm	Not Qualified	NC	61 dB	1.8 V			e3	BREAK-BEFORE-MAKE	260	55 ns	.6 ohm	15 ns		2.9 mm
ADG742BKS-REEL	Analog Devices	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.1 mm	1.25 mm	Not Qualified	NO	55 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY		e0	BREAK-BEFORE-MAKE		20 ns	5 ohm	13 ns		2 mm
ADG801BRT-REEL7	Analog Devices	SPST	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	2/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm	1.6 mm	Not Qualified	NO	61 dB	1.8 V			e0	BREAK-BEFORE-MAKE	240	55 ns	.6 ohm	15 ns		2.9 mm
ADG602BRT-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm	1.6 mm	Not Qualified	NO	60 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY	-2.7 V	e0	BREAK-BEFORE-MAKE	240	120 ns	2.5 ohm	75 ns	.35 ohm	2.9 mm
ADG742BKS-REEL7	Analog Devices	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.1 mm	1.25 mm	Not Qualified	NO	55 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY		e0	BREAK-BEFORE-MAKE		20 ns	5 ohm	13 ns		2 mm
ADG749BKS	Analog Devices	SPDT	AUTOMOTIVE	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT		5.5 V	1.1 mm	1.25 mm	Not Qualified		67 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY		e0	BREAK-BEFORE-MAKE		15 ns	12 ohm	8 ns	.8 ohm	2 mm
ADG701LBRT-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	NC	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE	240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG602BRTZ-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm	1.6 mm	Not Qualified	NC	60 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY	-2.7 V	e4	BREAK-BEFORE-MAKE	260	120 ns	2.5 ohm	75 ns	.35 ohm	2.9 mm
ADG702LBRT-REEL7	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	NO	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE	240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG702LBRTZ-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	NO	55 dB	1.8 V			e3	BREAK-BEFORE-MAKE	260	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG751BRT	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT		5.5 V	1.45 mm	1.65 mm	Not Qualified		75 dB	1.8 V	SINGLE T-SWITCH		e0	BREAK-BEFORE-MAKE		19 ns	90 ohm	6 ns		2.9 mm
ADG601BRT	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.45 mm	1.6 mm	Not Qualified	NO	60 dB	2.7 V		-2.7 V	e0	BREAK-BEFORE-MAKE		120 ns	2.5 ohm	75 ns	.35 ohm	2.9 mm
ADG749BKS-R2	Analog Devices		INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1		CMOS	GULL WING				2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G6	SEPARATE OUTPUT					Not Qualified							BREAK-BEFORE-MAKE			10 ohm
ADG819BRT-500RL7	Analog Devices	SPDT	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING				3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6		1	3.6 V	1.45 mm	1.6 mm	Not Qualified		71 dB	2.7 V	5 VOLT NOMINAL VOLTAGE ALSO AVAILABLE; 2:1 MUX IS ALSO AVAILABLE		e0	BREAK-BEFORE-MAKE	240	70 ns	1.4 ohm	21 ns	.06 ohm	2.9 mm
ADG802BRT-REEL	Analog Devices	SPST	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	2/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm	1.6 mm	Not Qualified	NC	61 dB	1.8 V			e0	BREAK-BEFORE-MAKE		55 ns	.6 ohm	15 ns		2.9 mm
ADG719BRT-R2	Analog Devices	SPDT	INDUSTRIAL	6	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1		CMOS	GULL WING				3/5	SMALL OUTLINE, THIN PROFILE	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G6						Not Qualified							BREAK-BEFORE-MAKE			10 ohm
ADG751BRT-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm	1.65 mm	Not Qualified		75 dB	1.8 V	SINGLE T-SWITCH		e0	BREAK-BEFORE-MAKE	240	19 ns	90 ohm	6 ns		2.9 mm
ADG820BRT	Analog Devices	SPDT	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.45 mm	1.65 mm	Not Qualified		71 dB	1.8 V			e0	MAKE-BEFORE-BREAK		35 ns	1.4 ohm	45 ns	.06 ohm	2.9 mm
ADG819BCB-R2	Analog Devices	SPDT	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	UNSPECIFIED	1	1	CMOS	BALL			3 V	3/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	BOTTOM	R-XBGA-B6			5.5 V	.67 mm	1.14 mm	Not Qualified		71 dB	1.8 V			e0	BREAK-BEFORE-MAKE		60 ns	1.4 ohm	16 ns	.06 ohm	2.18 mm
ADG741BKSZ-REEL7	Analog Devices	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm	1.25 mm	Not Qualified	NO	55 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY		e4	BREAK-BEFORE-MAKE	260	20 ns	5 ohm	13 ns		2 mm
ADG701BRT	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm	1.6 mm	Not Qualified	NO	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE	240	20 ns	5 ohm	13 ns		2.9 mm
ADG842YKSZ-REEL7	Analog Devices	SPST	AUTOMOTIVE	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			2.5 V	1.8/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	3.6 V	1.1 mm	1.25 mm	Not Qualified	NC	54 dB	1.65 V			e4	BREAK-BEFORE-MAKE	260	16.5 ns	.35 ohm	8.2 ns		2 mm
ADG819BCB-REEL	Analog Devices	SPDT	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	UNSPECIFIED	1	1	CMOS	BALL			3 V	3/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	BOTTOM	R-XBGA-B6		1	5.5 V	.67 mm	1.14 mm	Not Qualified		71 dB	1.8 V			e0	BREAK-BEFORE-MAKE		60 ns	1.4 ohm	16 ns	.06 ohm	2.18 mm
ADG801BRT-R2	Analog Devices	SPST	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	2/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.45 mm	1.6 mm	Not Qualified	NO	61 dB	1.8 V			e0	BREAK-BEFORE-MAKE		55 ns	.6 ohm	15 ns		2.9 mm
ADG741BKS	Analog Devices	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			3.3 V	1.1 mm	1.25 mm	Not Qualified	NC	55 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY		e0	BREAK-BEFORE-MAKE		20 ns	5 ohm	13 ns		2 mm
ADG751ART-REEL7	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm	1.65 mm	Not Qualified		65 dB	1.8 V	SINGLE T-SWITCH		e0	BREAK-BEFORE-MAKE	240	19 ns	50 ohm	6 ns		2.9 mm
ADG802BCBZ-REEL7	Analog Devices	SPST	AUTOMOTIVE	6	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	BALL			3 V	3/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B6			5.5 V	.67 mm	1.14 mm	Not Qualified	NC	61 dB	1.8 V			e1	BREAK-BEFORE-MAKE		55 ns	.6 ohm	15 ns		2.18 mm
ADG741BKS-REEL	Analog Devices	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.1 mm	1.25 mm	Not Qualified	NC	55 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY		e0	BREAK-BEFORE-MAKE		20 ns	5 ohm	13 ns		2 mm
ADG751ART	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT		5.5 V	1.45 mm	1.65 mm	Not Qualified		65 dB	1.8 V	SINGLE T-SWITCH		e0	BREAK-BEFORE-MAKE		19 ns	50 ohm	6 ns		2.9 mm
ADG752BRTZ-REEL	Analog Devices	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel	-40 Cel	Matte Tin (Sn)	DUAL	R-PDSO-G6			5.5 V	1.45 mm	1.6 mm				1.8 V			e3				50 ohm		.2 ohm	2.9 mm
ADG741BKS-R2	Analog Devices	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.1 mm	1.25 mm	Not Qualified	NO	55 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY		e0	BREAK-BEFORE-MAKE		20 ns	5 ohm	13 ns		2 mm
ADG849YKS	Analog Devices	SPDT	AUTOMOTIVE	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT		5.5 V	1.1 mm	1.25 mm	Not Qualified		71 dB	1.8 V	ALSO OPERATES AT +5 V NOMINAL SUPPLY		e0	BREAK-BEFORE-MAKE		60 ns	1.4 ohm	16 ns	.06 ohm	2 mm
ADG3248BKS-R2	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	2	CMOS	GULL WING			3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6		1	3.6 V	1.1 mm	1.25 mm	Not Qualified			2.3 V			e0		240		28 ohm		.1 ohm	2 mm
ADG859YRYZ-REEL	Analog Devices	SPDT	AUTOMOTIVE	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	NO LEAD			2.7 V	3/5	SMALL OUTLINE, VERY THIN PROFILE	TSSOP6,.06,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-N6		1	5.5 V	.6 mm	1.65 mm	Not Qualified		78 dB	1.8 V			e3	BREAK-BEFORE-MAKE		15 ns	4.3 ohm	9.5 ns	.03 ohm	1.66 mm
ADG842YKSZ-REEL	Analog Devices	SPST	AUTOMOTIVE	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			2.5 V	1.8/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	3.6 V	1.1 mm	1.25 mm	Not Qualified	NC	54 dB	1.65 V			e4	BREAK-BEFORE-MAKE	260	16.5 ns	.35 ohm	8.2 ns		2 mm
ADG819BRT-REEL	Analog Devices	SPDT	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm	1.65 mm	Not Qualified		71 dB	1.8 V			e0	BREAK-BEFORE-MAKE		60 ns	1.4 ohm	16 ns	.06 ohm	2.9 mm
ADG801BRTZ-REEL	Analog Devices	SPST	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm	1.6 mm	Not Qualified	NO	61 dB	1.8 V			e3	BREAK-BEFORE-MAKE	260	55 ns	.6 ohm	15 ns		2.9 mm
ADG742BKSZ-R2	Analog Devices	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm	1.25 mm	Not Qualified	NC	55 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY		e4	BREAK-BEFORE-MAKE	260	20 ns	5 ohm	13 ns		2 mm
ADG801BRT-REEL	Analog Devices	SPST	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	2/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.45 mm	1.6 mm	Not Qualified	NO	61 dB	1.8 V			e0	BREAK-BEFORE-MAKE		55 ns	.6 ohm	15 ns		2.9 mm
ADG820BRTZ-REEL7	Analog Devices	SPDT	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm	1.6 mm	Not Qualified		71 dB	1.8 V			e3		260	35 ns	1.4 ohm	45 ns	.06 ohm	2.9 mm
ADG859BRYZ-REEL	Analog Devices	SPDT	INDUSTRIAL	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	NO LEAD			2.7 V	3/5	SMALL OUTLINE, VERY THIN PROFILE	TSSOP6,.06,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-N6		1	5.5 V	.6 mm	1.65 mm	Not Qualified		78 dB	1.8 V			e3	BREAK-BEFORE-MAKE		15 ns	4.3 ohm	9.5 ns	.03 ohm	1.66 mm
ADG702BRT-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm	1.6 mm	Not Qualified	NC	55 dB	1.8 V			e0	BREAK-BEFORE-MAKE	240	20 ns	5 ohm	13 ns		2.9 mm
ADG752BRT-REEL7	Analog Devices	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	COMMON OUTPUT	1	5.5 V	1.45 mm	1.65 mm	Not Qualified	NO/NC	80 dB	1.8 V	CAN ALSO BE OPERATED FROM 4.5 TO 5.5V		e0	BREAK-BEFORE-MAKE	240	18 ns	50 ohm	8 ns	.2 ohm	2.9 mm
ADG601BRT-REEL7	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6			5.5 V	1.45 mm	1.6 mm	Not Qualified	NC	60 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY	-2.7 V	e3	BREAK-BEFORE-MAKE		120 ns	2.5 ohm	75 ns	.35 ohm	2.9 mm
ADG819BRT	Analog Devices	SPDT	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.45 mm	1.65 mm	Not Qualified		71 dB	1.8 V			e0	BREAK-BEFORE-MAKE		60 ns	1.4 ohm	16 ns	.06 ohm	2.9 mm
ADG820BRTZ-REEL	Analog Devices	SPDT	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING			3 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm	1.6 mm	Not Qualified		71 dB	1.8 V			e3		260	35 ns	1.4 ohm	45 ns	.06 ohm	2.9 mm
ADG602BRT-REEL7	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6			5.5 V	1.45 mm	1.6 mm	Not Qualified	NO	60 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY	-2.7 V	e3	BREAK-BEFORE-MAKE		120 ns	2.5 ohm	75 ns	.35 ohm	2.9 mm
ADG802BCB-REEL7	Analog Devices	SPST	AUTOMOTIVE	6	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY	1	1	CMOS	BALL			3 V	3/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel		BOTTOM	R-PBGA-B6			5.5 V	.67 mm	1.14 mm	Not Qualified	NC	61 dB	1.8 V				BREAK-BEFORE-MAKE		55 ns	.6 ohm	15 ns		2.18 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.