6 Multiplexers & Switches 639

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Adjustable Threshold	Maximum Input Voltage
TMUX4157NDCKR	Texas Instruments	SPDT	MILITARY	6		RECTANGULAR	YES	PLASTIC/EPOXY	.07 mA	1	1		200 kHz	GULL WING	-4 V	-10 V	5 V						125 Cel	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	COMMON OUTPUT	1			.15 A				40 dB			-12 V	-12 V	e4	BREAK-BEFORE-MAKE	30	260	280 ns	6 ohm	260 ns	.2 ohm			0 V
TPS22924BYZZR	Texas Instruments	SPST	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	UNSPECIFIED		1	1			BALL			3.3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20		.5 mm	85 Cel	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	R-XBGA-B6		1	3.6 V	.35 mm		.888 mm				.75 V				e1		30	260					1.388 mm	NO
TS5A3159AYEPR	Texas Instruments	SPDT	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	UNSPECIFIED		1	1			BALL			1.8 V	1.8/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		BOTTOM	R-XBGA-B6			5.5 V	.5 mm		.9 mm	Not Qualified		64 dB	1.65 V					BREAK-BEFORE-MAKE			70 ns	2.5 ohm	40 ns	.15 ohm	1.4 mm
SN74LVC1G66DSF2	Texas Instruments	SPST	INDUSTRIAL	6	VSON	SQUARE	YES	PLASTIC/EPOXY	.01 mA	1	1		300 kHz	NO LEAD			1.8 V		SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,14		.35 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-N6		1	5.5 V	.4 mm	.1 A	1 mm		NC	58 dB	1.65 V				e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	12 ns	120 ohm	10 ns	12 ohm	1 mm
TS5A3159ADCKTG4	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0005 mA	1	1			GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	1.95 V	1.1 mm		1.25 mm	Not Qualified		64 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	75 ns	2.5 ohm	50 ns	.15 ohm	2 mm		5.5 V
TS5A3159DBVTG4	Texas Instruments	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0001 mA	1	1		100 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified		63 dB	1.65 V	2-CHANNEL MUX/DEMUX	0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	95 ns	3.2 ohm	70 ns	.7 ohm	2.9 mm		5.5 V
TS5A3160YZPR	Texas Instruments	SPDT	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	UNSPECIFIED		1	1			BALL			1.8 V	1.8/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		BOTTOM	R-XBGA-B6	SEPARATE OUTPUT		1.95 V	.5 mm		.9 mm	Not Qualified		64 dB	1.65 V					MAKE-BEFORE-BREAK			27 ns	2.5 ohm	30 ns	.15 ohm	1.4 mm
74LVC1G3157DRYRG4	Texas Instruments	SPDT	INDUSTRIAL	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY	.035 mA	1	1	CMOS	340 kHz	NO LEAD			2.3 V	3.3	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20	Multiplexers or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-N6	COMMON OUTPUT	1	5.5 V	.6 mm		1 mm	Not Qualified	NC	57 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	14 ns	30 ohm	7.5 ns	.1 ohm	1.45 mm
SN74LVC1G66DSFR	Texas Instruments	SPDT	INDUSTRIAL	6	VSON	SQUARE	YES	PLASTIC/EPOXY	.01 mA	1	1		300 kHz	NO LEAD			1.8 V		SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,14		.35 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N6		1	5.5 V	.4 mm	.1 A	1 mm	Not Qualified	NC	58 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	12 ns	120 ohm	10 ns	12 ohm	1 mm
TS5A63157YZPR	Texas Instruments	SPDT	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	UNSPECIFIED		1	1			BALL			1.8 V	1.8/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		BOTTOM	R-XBGA-B6			5.5 V	.5 mm		.9 mm	Not Qualified		60 dB	1.65 V					BREAK-BEFORE-MAKE			24 ns	40 ohm	12 ns	.1 ohm	1.4 mm
TS5A3160DCKJ	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0005 mA	1	1		105 kHz	GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.1 mm		1.25 mm	Not Qualified		64 dB	1.65 V		0 V		e4	MAKE-BEFORE-BREAK	30	260	27 ns	3.5 ohm	30 ns	.15 ohm	2 mm		5.5 V
TS5A63157DCKRE4	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm		1.25 mm	Not Qualified		60 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	24 ns	40 ohm	12 ns	.1 ohm	2 mm
TS5A3157DCKRG4	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	1		300 kHz	GULL WING			1.8 V	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.1 mm		1.25 mm	Not Qualified	NC	65 dB	1.65 V	VIDEO APPLICATION	0 V		e4	BREAK-BEFORE-MAKE	30	260	24 ns	160 ohm	7.5 ns	.5 ohm	2 mm		5.5 V
TS5A12301EYFPR	Texas Instruments	SPDT	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY	.005 mA	1	1		55 kHz	BALL			2.5 V	5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B6	SEPARATE OUTPUT	1	5.5 V	.5 mm		.77 mm	Not Qualified	NO/NC	63 dB	2.25 V		0 V		e1	BREAK-BEFORE-MAKE	30	260	175 ns	1.6 ohm	160 ns	.15 ohm	1.17 mm		5.5 V
TMUX1101DBVR	Texas Instruments	SPST	AUTOMOTIVE	6	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS	300 kHz	GULL WING			1.8 V		SMALL OUTLINE				125 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6		1	5.5 V						40 dB	1.08 V				e4		30	260	44 ns	80 ohm	44 ns	.4 ohm
TS5A3159ADCKTE4	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING			1.8 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	1.95 V	1.1 mm		1.25 mm	Not Qualified		64 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	75 ns	2.5 ohm	50 ns	.15 ohm	2 mm
TS5A3159DCKTE4	Texas Instruments	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING			1.8 V	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm		1.25 mm	Not Qualified		63 dB	1.65 V	2-CHANNEL MUX/DEMUX			e4	BREAK-BEFORE-MAKE	30	260	95 ns	3.2 ohm	70 ns	.7 ohm	2 mm
TS5A63157YEPR	Texas Instruments	SPDT	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	UNSPECIFIED		1	1			BALL			1.8 V	1.8/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		BOTTOM	R-XBGA-B6			5.5 V	.5 mm		.9 mm	Not Qualified		60 dB	1.65 V					BREAK-BEFORE-MAKE			24 ns	40 ohm	12 ns	.1 ohm	1.4 mm
TMUX1102DBVR	Texas Instruments	SPST	AUTOMOTIVE	6	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS	300 kHz	GULL WING			1.8 V		SMALL OUTLINE				125 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G6		1	5.5 V						40 dB	1.08 V				e4		30	260	44 ns	80 ohm	44 ns	.4 ohm
TS5A63157DBVRE4	Texas Instruments	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING			1.8 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.6 mm	Not Qualified		60 dB	1.65 V				e4	BREAK-BEFORE-MAKE	30	260	24 ns	40 ohm	12 ns	.1 ohm	2.9 mm
TPS22924BYZZT	Texas Instruments	SPST	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	UNSPECIFIED		1	1			BALL			3.3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20		.5 mm	85 Cel	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	R-XBGA-B6		1	3.6 V	.35 mm		.888 mm				.75 V				e1		30	260					1.388 mm	NO
MAX20336ENT+	Analog Devices	DPST	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		1	2			BALL			1.8 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	-40 Cel	TIN SILVER COPPER NICKEL	BOTTOM	R-PBGA-B6		1	5.5 V	.5 mm		.808 mm			55 dB	1.6 V				e2		30	260		.4 ohm		.003 ohm	1.308 mm
MAX20336ENT+T	Analog Devices	DPST	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		1	2			BALL			1.8 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	-40 Cel	TIN SILVER COPPER NICKEL	BOTTOM	R-PBGA-B6		1	5.5 V	.5 mm		.808 mm			55 dB	1.6 V				e2		30	260		.4 ohm		.003 ohm	1.308 mm
ADG752BRT-REEL	Analog Devices	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	COMMON OUTPUT	1	5.5 V	1.45 mm		1.65 mm	Not Qualified	NO/NC	80 dB	1.8 V	CAN ALSO BE OPERATED FROM 4.5 TO 5.5V			e0	BREAK-BEFORE-MAKE		240	18 ns	50 ohm	8 ns	.2 ohm	2.9 mm
ADG802BRT-R2	Analog Devices	SPST	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	2/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.45 mm		1.65 mm	Not Qualified	NC	61 dB	1.8 V				e0	BREAK-BEFORE-MAKE			55 ns	.6 ohm	15 ns		2.9 mm
ADG741BKSZ-REEL	Analog Devices	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm		1.25 mm	Not Qualified	NO	55 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY			e4	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns		2 mm
ADG702BRTZ-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns		2.9 mm
ADG742BKS	Analog Devices	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			3.3 V	1.1 mm		1.25 mm	Not Qualified	NO	55 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY			e0	BREAK-BEFORE-MAKE			20 ns	5 ohm	13 ns		2 mm
ADG3248BKS-REEL7	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	CMOS		GULL WING			3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			3.6 V	1.1 mm		1.25 mm	Not Qualified			2.3 V				e0					28 ohm		.1 ohm	2 mm
ADG841YKSZ-500RL7	Analog Devices	SPST	AUTOMOTIVE	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			2.5 V	1.8/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	3.6 V	1.1 mm		1.25 mm	Not Qualified	NO	54 dB	1.65 V				e4	BREAK-BEFORE-MAKE		260	16.5 ns	.35 ohm	8.2 ns		2 mm
ADG859YRYZ-REEL7	Analog Devices	SPDT	AUTOMOTIVE	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		NO LEAD			2.7 V	3/5	SMALL OUTLINE, VERY THIN PROFILE	TSSOP6,.06,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-N6		1	5.5 V	.6 mm		1.65 mm	Not Qualified		78 dB	1.8 V				e3	BREAK-BEFORE-MAKE			15 ns	4.3 ohm	9.5 ns	.03 ohm	1.66 mm
ADG801BCB-REEL7	Analog Devices	SPST	AUTOMOTIVE	6	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		BALL			3 V	3/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel		BOTTOM	R-PBGA-B6			5.5 V	.67 mm		1.14 mm	Not Qualified	NO	61 dB	1.8 V					BREAK-BEFORE-MAKE			55 ns	.6 ohm	15 ns		2.18 mm
ADG742BKSZ-REEL7	Analog Devices	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm		1.25 mm	Not Qualified	NC	55 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY			e4	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns		2 mm
ADG742BKSZ-REEL	Analog Devices	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm		1.25 mm	Not Qualified	NC	55 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY			e4	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns		2 mm
ADG842YKSZ-500RL7	Analog Devices	SPST	AUTOMOTIVE	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			2.5 V	1.8/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	3.6 V	1.1 mm		1.25 mm	Not Qualified	NC	54 dB	1.65 V				e4	BREAK-BEFORE-MAKE		260	16.5 ns	.35 ohm	8.2 ns		2 mm
ADG841YKSZ-REEL	Analog Devices	SPST	AUTOMOTIVE	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			2.5 V	1.8/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	3.6 V	1.1 mm		1.25 mm	Not Qualified	NO	54 dB	1.65 V				e4	BREAK-BEFORE-MAKE		260	16.5 ns	.35 ohm	8.2 ns		2 mm
ADG701LBRTZ-REEL7	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG820BRT-REEL	Analog Devices	SPDT	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.45 mm		1.65 mm	Not Qualified		71 dB	1.8 V				e0	MAKE-BEFORE-BREAK			35 ns	1.4 ohm	45 ns	.06 ohm	2.9 mm
ADG3248BKS-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	CMOS		GULL WING			3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			3.6 V	1.1 mm		1.25 mm	Not Qualified			2.3 V				e0					28 ohm		.1 ohm	2 mm
ADG742BKS-R2	Analog Devices	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.1 mm		1.25 mm	Not Qualified	NC	55 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY			e0	BREAK-BEFORE-MAKE			20 ns	5 ohm	13 ns		2 mm
ADG841YKSZ-REEL7	Analog Devices	SPST	AUTOMOTIVE	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			2.5 V	1.8/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	3.6 V	1.1 mm		1.25 mm	Not Qualified	NO	54 dB	1.65 V				e4	BREAK-BEFORE-MAKE		260	16.5 ns	.35 ohm	8.2 ns		2 mm
ADG602BRT	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G6			5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	60 dB	2.7 V			-2.7 V	e0	BREAK-BEFORE-MAKE	30	220	120 ns	2.5 ohm	75 ns	.35 ohm	2.9 mm
ADG1202BRJZ-R2	Analog Devices		AUTOMOTIVE	6	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1		CMOS		GULL WING				12/+-15	SMALL OUTLINE, THIN PROFILE	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1					Not Qualified	NO						e4	BREAK-BEFORE-MAKE		260	250 ns	625 ohm
ADG702LBRT-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NO	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG749BKS-REEL	Analog Devices	SPDT	AUTOMOTIVE	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT		5.5 V	1.1 mm		1.25 mm	Not Qualified		67 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY			e0	BREAK-BEFORE-MAKE			15 ns	12 ohm	8 ns	.8 ohm	2 mm
ADG601BRT-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.6 mm	Not Qualified	NC	60 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e0	BREAK-BEFORE-MAKE		240	120 ns	2.5 ohm	75 ns	.35 ohm	2.9 mm
ADG1202BRJZ-REEL7	Analog Devices	SPST	AUTOMOTIVE	6	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1		CMOS		GULL WING				12/+-15	SMALL OUTLINE, THIN PROFILE	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1					Not Qualified	NO						e4	BREAK-BEFORE-MAKE		260	250 ns	625 ohm
ADG752BRT	Analog Devices	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	COMMON OUTPUT	1	5.5 V	1.45 mm		1.65 mm	Not Qualified	NO/NC	80 dB	1.8 V	CAN ALSO BE OPERATED FROM 4.5 TO 5.5V			e0	BREAK-BEFORE-MAKE		240	18 ns	50 ohm	8 ns	.2 ohm	2.9 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.