6 Multiplexers & Switches 639

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
ADG701LBRT-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	NC	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG602BRTZ-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm	1.6 mm	Not Qualified	NC	60 dB	2.7 V	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY		-2.7 V	e4	BREAK-BEFORE-MAKE		260	120 ns	2.5 ohm	75 ns	.35 ohm	2.9 mm
ADG702LBRT-REEL7	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	NO	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG702LBRTZ-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	NO	55 dB	1.8 V				e3	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns	1.5 ohm	2.9 mm
ADG751BRT	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT		5.5 V	1.45 mm	1.65 mm	Not Qualified		75 dB	1.8 V	SINGLE T-SWITCH			e0	BREAK-BEFORE-MAKE			19 ns	90 ohm	6 ns		2.9 mm
ADG601BRT	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.45 mm	1.6 mm	Not Qualified	NO	60 dB	2.7 V			-2.7 V	e0	BREAK-BEFORE-MAKE			120 ns	2.5 ohm	75 ns	.35 ohm	2.9 mm
ADG749BKS-R2	Analog Devices		INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1		CMOS	GULL WING				2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G6	SEPARATE OUTPUT					Not Qualified								BREAK-BEFORE-MAKE				10 ohm
ADG819BRT-500RL7	Analog Devices	SPDT	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING				3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6		1	3.6 V	1.45 mm	1.6 mm	Not Qualified		71 dB	2.7 V	5 VOLT NOMINAL VOLTAGE ALSO AVAILABLE; 2:1 MUX IS ALSO AVAILABLE			e0	BREAK-BEFORE-MAKE		240	70 ns	1.4 ohm	21 ns	.06 ohm	2.9 mm
ADG802BRT-REEL	Analog Devices	SPST	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	2/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm	1.6 mm	Not Qualified	NC	61 dB	1.8 V				e0	BREAK-BEFORE-MAKE			55 ns	.6 ohm	15 ns		2.9 mm
ADG719BRT-R2	Analog Devices	SPDT	INDUSTRIAL	6	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1		CMOS	GULL WING				3/5	SMALL OUTLINE, THIN PROFILE	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G6						Not Qualified								BREAK-BEFORE-MAKE				10 ohm
ADG751BRT-REEL	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm	1.65 mm	Not Qualified		75 dB	1.8 V	SINGLE T-SWITCH			e0	BREAK-BEFORE-MAKE		240	19 ns	90 ohm	6 ns		2.9 mm
ADG820BRT	Analog Devices	SPDT	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.45 mm	1.65 mm	Not Qualified		71 dB	1.8 V				e0	MAKE-BEFORE-BREAK			35 ns	1.4 ohm	45 ns	.06 ohm	2.9 mm
ADG819BCB-R2	Analog Devices	SPDT	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	UNSPECIFIED		1	1	CMOS	BALL			3 V	3/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	BOTTOM	R-XBGA-B6			5.5 V	.67 mm	1.14 mm	Not Qualified		71 dB	1.8 V				e0	BREAK-BEFORE-MAKE			60 ns	1.4 ohm	16 ns	.06 ohm	2.18 mm
ADG741BKSZ-REEL7	Analog Devices	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm	1.25 mm	Not Qualified	NO	55 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY			e4	BREAK-BEFORE-MAKE		260	20 ns	5 ohm	13 ns		2 mm
ADG701BRT	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm	1.6 mm	Not Qualified	NO	55 dB	1.8 V				e0	BREAK-BEFORE-MAKE		240	20 ns	5 ohm	13 ns		2.9 mm
ADG842YKSZ-REEL7	Analog Devices	SPST	AUTOMOTIVE	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			2.5 V	1.8/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6		1	3.6 V	1.1 mm	1.25 mm	Not Qualified	NC	54 dB	1.65 V				e4	BREAK-BEFORE-MAKE		260	16.5 ns	.35 ohm	8.2 ns		2 mm
ADG819BCB-REEL	Analog Devices	SPDT	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	UNSPECIFIED		1	1	CMOS	BALL			3 V	3/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	BOTTOM	R-XBGA-B6		1	5.5 V	.67 mm	1.14 mm	Not Qualified		71 dB	1.8 V				e0	BREAK-BEFORE-MAKE			60 ns	1.4 ohm	16 ns	.06 ohm	2.18 mm
ADG801BRT-R2	Analog Devices	SPST	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	2/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.45 mm	1.6 mm	Not Qualified	NO	61 dB	1.8 V				e0	BREAK-BEFORE-MAKE			55 ns	.6 ohm	15 ns		2.9 mm
ADG741BKS	Analog Devices	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			3.3 V	1.1 mm	1.25 mm	Not Qualified	NC	55 dB	1.8 V	CAN ALSO OPERATE WITH 5 VOLT SUPPLY			e0	BREAK-BEFORE-MAKE			20 ns	5 ohm	13 ns		2 mm
ADG751ART-REEL7	Analog Devices	SPST	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	SEPARATE OUTPUT	1	5.5 V	1.45 mm	1.65 mm	Not Qualified		65 dB	1.8 V	SINGLE T-SWITCH			e0	BREAK-BEFORE-MAKE		240	19 ns	50 ohm	6 ns		2.9 mm
NL17SZ157DFT2G	Onsemi	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	1		GULL WING					SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP6,.08		.65 mm	125 Cel	-55 Cel		DUAL	R-PDSO-G6		1	5.5 V	1.1 mm	1.25 mm				1.65 V		0 V			BREAK-BEFORE-MAKE			20 ns		20 ns		2 mm	5.5 V
7SB3257MUTCG	Onsemi	SINGLE-ENDED MULTIPLEXER	MILITARY	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY		1	2		NO LEAD			4.5 V		SMALL OUTLINE, VERY THIN PROFILE			.4 mm	125 Cel	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-N6		1	5.5 V	.55 mm	1 mm	Not Qualified			4 V				e4		NOT SPECIFIED	NOT SPECIFIED	4.6 ns	15 ohm	4.8 ns		1.2 mm
7SB3257DFT2G	Onsemi	SINGLE-ENDED MULTIPLEXER	MILITARY	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2		GULL WING			4.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	125 Cel	-55 Cel	MATTE TIN	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm	1.25 mm	Not Qualified			4 V				e3		30	260	4.6 ns	15 ohm	4.8 ns		2 mm
NL17SZ157MU1TCG	Onsemi	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	1		NO LEAD					SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,20		.5 mm	125 Cel	-55 Cel		DUAL	R-PDSO-N6		1	5.5 V	.55 mm	1 mm				1.65 V		0 V			BREAK-BEFORE-MAKE			20 ns		20 ns		1.45 mm	5.5 V
7SB3257MU1TCG	Onsemi	SINGLE-ENDED MULTIPLEXER	MILITARY	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY		1	2		NO LEAD			4.5 V		SMALL OUTLINE, VERY THIN PROFILE			.5 mm	125 Cel	-55 Cel		DUAL	R-PDSO-N6			5.5 V	.55 mm	1 mm				4 V						NOT SPECIFIED	NOT SPECIFIED	4.6 ns	15 ohm	4.8 ns		1.45 mm
7SB3257MU3TCG	Onsemi	SINGLE-ENDED MULTIPLEXER	MILITARY	6	VSON	SQUARE	YES	PLASTIC/EPOXY		1	2		NO LEAD			4.5 V		SMALL OUTLINE, VERY THIN PROFILE			.35 mm	125 Cel	-55 Cel		DUAL	S-PDSO-N6			5.5 V	.55 mm	1 mm				4 V						NOT SPECIFIED	NOT SPECIFIED	4.6 ns	15 ohm	4.8 ns		1 mm
NLVASB3157DFT2	Onsemi	SPDT	MILITARY	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	CMOS	GULL WING			2.3 V	1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexers or Switches	.65 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm	1.25 mm	Not Qualified		57 dB	1.65 V				e0	BREAK-BEFORE-MAKE	30	235	24 ns	15 ohm	13 ns	.5 ohm	2 mm
7SB3257DTT1G	Onsemi	SINGLE-ENDED MULTIPLEXER	MILITARY	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2		GULL WING			4.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.95 mm	125 Cel	-55 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm	1.5 mm	Not Qualified			4 V				e3		NOT SPECIFIED	NOT SPECIFIED	4.6 ns	15 ohm	4.8 ns		3 mm
7SB3257DTT2G	Onsemi	SINGLE-ENDED MULTIPLEXER	MILITARY	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2		GULL WING			4.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.95 mm	125 Cel	-55 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm	1.5 mm				4 V				e3		NOT SPECIFIED	NOT SPECIFIED	4.6 ns	15 ohm	4.8 ns		3 mm
7SB3257CMX1TCG	Onsemi	SINGLE-ENDED MULTIPLEXER	MILITARY	6	VFLGA	SQUARE	YES	UNSPECIFIED		1	2		BUTT			4.5 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.35 mm	125 Cel	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	BOTTOM	S-XBGA-B6		1	5.5 V	.4 mm	1 mm	Not Qualified			4 V				e4		NOT SPECIFIED	NOT SPECIFIED	4.6 ns	15 ohm	4.8 ns		1 mm
7SB3257AMX1TCG	Onsemi	SINGLE-ENDED MULTIPLEXER	MILITARY	6	VFLGA	RECTANGULAR	YES	UNSPECIFIED		1	2		BUTT			4.5 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	125 Cel	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	BOTTOM	R-XBGA-B6		1	5.5 V	.4 mm	1 mm	Not Qualified			4 V				e4		NOT SPECIFIED	NOT SPECIFIED	4.6 ns	15 ohm	4.8 ns		1.45 mm
NLVAS4599DTT1	Onsemi	SPDT	MILITARY	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			4.5 V	2/5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm	1.5 mm	Not Qualified		93 dB	2 V				e0	BREAK-BEFORE-MAKE		235	30 ns	40 ohm	15 ns	3 ohm	3 mm
NL5S4157ADFT2G	Onsemi	SPDT	AUTOMOTIVE	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.005 mA	1	1		GULL WING					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08		.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm	1.25 mm			62 dB	1.65 V		0 V		e3	BREAK-BEFORE-MAKE	30	260	100 ns	1.4 ohm	100 ns	.15 ohm	2 mm	5.5 V
NLVAS4599DTT1G	Onsemi	SPDT	MILITARY	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			4.5 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-55 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6	COMMON OUTPUT	1	5.5 V	1.1 mm	1.5 mm	Not Qualified	NC	93 dB	2 V				e3	BREAK-BEFORE-MAKE	40	260	30 ns	40 ohm	15 ns	3 ohm	3 mm
NLVHC1GT66MUR2G	Onsemi	SPST	MILITARY	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	NO LEAD			3 V	2.5/5	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,16	Multiplexer or Switches	.4 mm	125 Cel	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-N6			5.5 V	.55 mm	1 mm	Not Qualified	NO	80 dB	2 V				e4			260	50 ns	60 ohm	50 ns		1.2 mm
NLVASB3157DFT2G	Onsemi	SPDT	MILITARY	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	CMOS	NO LEAD			2.3 V	1.8/5	SMALL OUTLINE, VERY THIN PROFILE	TSSOP6,.08	Multiplexers or Switches	.4 mm	125 Cel	-55 Cel	MATTE TIN	DUAL	R-PDSO-N6		1	5.5 V	.8 mm	1 mm	Not Qualified		57 dB	1.65 V				e3	BREAK-BEFORE-MAKE	30	260	24 ns	15 ohm	13 ns	.5 ohm	1.2 mm
7SB3257BMX1TCG	Onsemi	SINGLE-ENDED MULTIPLEXER	MILITARY	6	VFLGA	RECTANGULAR	YES	UNSPECIFIED		1	2		BUTT			4.5 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	125 Cel	-55 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	BOTTOM	R-XBGA-B6		1	5.5 V	.4 mm	1 mm	Not Qualified			4 V				e4		NOT SPECIFIED	NOT SPECIFIED	4.6 ns	15 ohm	4.8 ns		1.2 mm
NLVAST4599DTT1G	Onsemi	SPDT	MILITARY	6	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			2.5 V		SMALL OUTLINE, THIN PROFILE			.95 mm	125 Cel	-55 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm	1.5 mm			93 dB	2 V				e3		NOT SPECIFIED	NOT SPECIFIED	30 ns	85 ohm	15 ns	2 ohm	3 mm
NLVAS4599DFT2	Onsemi	SPDT	MILITARY	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			4.5 V	2/5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	125 Cel	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G6			5.5 V	1.1 mm	1.25 mm	Not Qualified		93 dB	2 V				e0	BREAK-BEFORE-MAKE	NOT SPECIFIED	235	30 ns	40 ohm	15 ns	3 ohm	2 mm
NL17SZ157MU3TCG	Onsemi	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	6	VSON	SQUARE	YES	PLASTIC/EPOXY	.01 mA	1	1		NO LEAD					SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,14		.35 mm	125 Cel	-55 Cel		DUAL	S-PDSO-N6		1	5.5 V	.65 mm	1 mm				1.65 V		0 V			BREAK-BEFORE-MAKE			20 ns		20 ns		1 mm	5.5 V
NL17SZ157DBVT1G	Onsemi	SINGLE-ENDED MULTIPLEXER	AUTOMOTIVE	6	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	1		GULL WING					SMALL OUTLINE, THIN PROFILE	TSOP6,.11,37		.95 mm	125 Cel	-55 Cel	MATTE TIN	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm	1.5 mm				1.65 V		0 V		e3	BREAK-BEFORE-MAKE	30	260	20 ns		20 ns		3 mm	5.5 V
FSAU3157P6X	Onsemi	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	CMOS	GULL WING			2.3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G6			5.5 V	1.1 mm	1.25 mm			57 dB	1.6 V						NOT SPECIFIED	NOT SPECIFIED	24 ns	100 ohm	13 ns	.5 ohm	2 mm
NLAS3157MX3TCG	Onsemi	SPDT	INDUSTRIAL	6	VSON	SQUARE	YES	UNSPECIFIED	.001 mA	1	1	CMOS	NO LEAD			3.3 V		SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.04,14		.35 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-XDSO-N6		1	4.5 V	.4 mm	1 mm			21 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	30 ns	23.2 ohm	25 ns		1 mm	4.5 V
NLAS9041DFT2G	Onsemi	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1		GULL WING			3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	TIN	DUAL	R-PDSO-G6			5.5 V	1.1 mm	1.25 mm	Not Qualified		52 dB	1.65 V				e3				30 ns	4 ohm	20 ns	.15 ohm	2 mm
NLAS5113DFT2G	Onsemi	SPST	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1		GULL WING			4.2 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN	DUAL	R-PDSO-G6			4.5 V	1.1 mm	1.25 mm	Not Qualified	NO		1.65 V				e3	BREAK-BEFORE-MAKE		260		1.3 ohm		.4 ohm	2 mm
NLAS4599DTT1	Onsemi	SPDT	MILITARY	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			4.5 V	2/5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-55 Cel	Tin/Lead (Sn80Pb20)	DUAL	R-PDSO-G6			5.5 V	1.1 mm	1.5 mm	Not Qualified		93 dB	2 V				e0	BREAK-BEFORE-MAKE	30	235	30 ns	40 ohm	15 ns	3 ohm	3 mm
NLVAS4599DFT2G	Onsemi	SPDT	MILITARY	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	GULL WING			4.5 V	2/5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	125 Cel	-55 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm	1.25 mm	Not Qualified		93 dB	2 V				e3	BREAK-BEFORE-MAKE	40	260	30 ns	40 ohm	15 ns	3 ohm	2 mm
FSA4159L6X	Onsemi	SPDT	INDUSTRIAL	6	VBCC	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS	BUTT			1.8 V	1.8/5	CHIP CARRIER, VERY THIN PROFILE	SOLCC6,.04,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	BOTTOM	R-PBCC-B6		1	5.5 V	.55 mm	1 mm	Not Qualified		60 dB	1.65 V				e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED	75 ns	2 ohm	50 ns	.15 ohm	1.45 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.