SPDT Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length
MAX4583CPE+	Analog Devices	SPDT	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.01 mA	3	1	CMOS		THROUGH-HOLE	-6 V	-5 V	5 V	3/5/+-5	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T16		1	6 V	4.572 mm	.02 A	7.62 mm	Not Qualified		74 dB	2 V	ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY	-2 V	e3	BREAK-BEFORE-MAKE	30	260	200 ns	80 ohm	100 ns	1 ohm	19.175 mm
MAX4564EKA+	Analog Devices	SPDT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-6 V	-5 V	5 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8		1	6 V	1.45 mm		1.625 mm			77 dB	2 V		-2 V	e4		30	260	75 ns	60 ohm	50 ns	.75 ohm	2.9 mm
MAX4544EUA+	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			5 V	3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8		1	12 V	1.1 mm		3 mm	Not Qualified		76 dB	2.7 V			e3	BREAK-BEFORE-MAKE	30	260	100 ns	60 ohm	75 ns	.8 ohm	3 mm
MAX4888ETI+G3U	Analog Devices	SPDT																																								NOT SPECIFIED	NOT SPECIFIED
MAX4583LESE+	Analog Devices	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	3	1	CMOS		GULL WING	-6 V	-5 V	5 V	2/12.6	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	6 V	1.75 mm		3.9 mm	Not Qualified		73 dB	2 V		-2 V	e3	BREAK-BEFORE-MAKE	30	260	200 ns	80 ohm	200 ns	1 ohm	9.9 mm
MAX4644EUA+T	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8		1	3.3 V	1.1 mm		3 mm	Not Qualified	NO/NC	55 dB	2.7 V	CAN ALSO OPERATE WITH 5V SUPPLY		e3	BREAK-BEFORE-MAKE	30	260	20 ns	8 ohm	7.5 ns	.1 ohm	3 mm
DG301ACJ+	Analog Devices	SPDT	COMMERCIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	1	CMOS		THROUGH-HOLE	-18 V	-15 V	15 V	+-15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T14		1	18 V	4.572 mm		7.62 mm	Not Qualified		62 dB	5 V		-5 V	e3	BREAK-BEFORE-MAKE	30	260	300 ns	50 ohm	250 ns		19.05 mm
DG307C/D	Analog Devices	SPDT	COMMERCIAL	14	DIE	RECTANGULAR	YES	UNSPECIFIED		2	1	CMOS		NO LEAD	-18 V	-15 V	15 V	+-15	UNCASED CHIP	DIE OR CHIP	Multiplexer or Switches		70 Cel	0 Cel	TIN LEAD	UPPER	R-XUUC-N14	SEPARATE OUTPUT		18 V				Not Qualified		62 dB	5 V		-5 V	e0	BREAK-BEFORE-MAKE			250 ns	50 ohm	150 ns
MAX4695EGC+T	Analog Devices	SPDT	INDUSTRIAL	12	VQCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED		1	1			NO LEAD			3 V		CHIP CARRIER, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-CQCC-N12		1	3.3 V	1 mm		3 mm	Not Qualified		75 dB	2.7 V			e3		30	260	30 ns	60 ohm	18 ns	3 ohm	3 mm
MAX333ACWP+T	Analog Devices	SPDT	COMMERCIAL	20	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-15 V	15 V		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20		1	20 V	2.65 mm		7.5 mm	Not Qualified		72 dB	4.5 V		-4.5 V	e3		30	260	175 ns	45 ohm	145 ns	2 ohm	12.8 mm
MAX4544EKA-T	Analog Devices	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			5 V	3.3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	COMMON OUTPUT	1	12 V	1.45 mm		1.625 mm	Not Qualified		76 dB	2.7 V			e4	BREAK-BEFORE-MAKE		245	100 ns	60 ohm	75 ns	.8 ohm	2.9 mm
MAX4583CUE+T	Analog Devices	SPDT	COMMERCIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	3	1	CMOS		GULL WING	-6 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	6 V	1.1 mm	.02 A	4.4 mm	Not Qualified		73 dB	2 V		-2 V	e3	BREAK-BEFORE-MAKE	30	260	200 ns	80 ohm	100 ns	1 ohm	5 mm
MAX4762EUB+T	Analog Devices	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	BICMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	65 dB	1.8 V			e3	BREAK-BEFORE-MAKE	30	260	80 ns	.85 ohm	70 ns	.05 ohm	3 mm
MAX4660EUA+T	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-20 V	-15 V	15 V	9/40/+-4.5/+-20	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8	SEPARATE OUTPUT	1	20 V	1.1 mm		3 mm	Not Qualified		70 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	25 ohm	150 ns	.4 ohm	3 mm
MAX4583ASE+	Analog Devices	SPDT	AUTOMOTIVE	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	3	1	CMOS		GULL WING	-6 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	125 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	6 V	1.75 mm	.02 A	3.9 mm	Not Qualified		73 dB	2 V		-2 V	e3	BREAK-BEFORE-MAKE	30	260	200 ns	80 ohm	100 ns	1 ohm	9.9 mm
MAX4533EWP+T	Analog Devices	SPDT																							Matte Tin (Sn) - annealed				1											e3		30	260
MAX4053ESE+	Analog Devices	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1	CMOS		GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	100 ohm	150 ns	12 ohm	9.9 mm
MAX4583AUE+T	Analog Devices	SPDT	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	3	1	CMOS		GULL WING	-6 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	6 V	1.1 mm	.02 A	4.4 mm	Not Qualified		73 dB	2 V		-2 V	e3	BREAK-BEFORE-MAKE	30	260	200 ns	80 ohm	100 ns	1 ohm	5 mm
MAX4556ESE+	Analog Devices	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1	CMOS		GULL WING	-20 V	-15 V	15 V	5,+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified		30 dB	4.5 V		-4.5 V	e3		30	260	300 ns	6 ohm	300 ns	.3 ohm	9.9 mm
MAX4619EUE+T	Analog Devices	SPDT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	3	1	CMOS		GULL WING			3.3 V	2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	3.6 V	1.1 mm	.075 A	4.4 mm	Not Qualified			3 V			e3	BREAK-BEFORE-MAKE	30	260	20 ns	20 ohm	15 ns		5 mm
DG301ABWE	Analog Devices	SPDT	OTHER	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-18 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	85 Cel	-25 Cel	TIN LEAD	DUAL	R-PDSO-G16		1	18 V	2.65 mm		7.5 mm	Not Qualified		62 dB	5 V		-5 V	e0	BREAK-BEFORE-MAKE			300 ns	50 ohm	250 ns		10.3 mm
MAX333ACAP+	Analog Devices	SPDT	COMMERCIAL	20	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-20 V	-15 V	15 V		SMALL OUTLINE, SHRINK PITCH			.65 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20		1	20 V	1.99 mm		5.29 mm	Not Qualified		72 dB	4.5 V		-4.5 V	e3		30	260	175 ns	45 ohm	145 ns		7.2 mm
MAX4717ETB+	Analog Devices	SPDT	INDUSTRIAL	10	HVSON	SQUARE	YES	UNSPECIFIED		2	1	BICMOS		NO LEAD			3 V	3/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-XDSO-N10	SEPARATE OUTPUT	1	5.5 V	.8 mm		3 mm	Not Qualified		55 dB	1.8 V			e3	BREAK-BEFORE-MAKE	30	260	80 ns	4.5 ohm	40 ns	.1 ohm	3 mm
MAX4053CSE+	Analog Devices	SPDT	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1	CMOS		GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	100 ohm	150 ns	12 ohm	9.9 mm
MAX4544CUA+	Analog Devices	SPDT	COMMERCIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			5 V	3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8		1	12 V	1.1 mm		3 mm	Not Qualified		76 dB	2.7 V			e3	BREAK-BEFORE-MAKE	30	260	100 ns	60 ohm	75 ns	.8 ohm	3 mm
MAX303EPE+	Analog Devices	SPDT	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	1	CMOS		THROUGH-HOLE	-20 V	-15 V	15 V	5,+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1	20 V	4.572 mm		7.62 mm	Not Qualified		72 dB	4.5 V	ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY	-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	35 ohm	100 ns	.5 ohm	19.175 mm
MAX4583LETE+	Analog Devices	SPDT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	.01 mA	3	1	CMOS		NO LEAD	-6 V	-5 V	5 V	2/12.6	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N16		1	6 V	.8 mm		4 mm	Not Qualified		73 dB	2 V		-2 V	e3	BREAK-BEFORE-MAKE	30	260	200 ns	80 ohm	200 ns	1 ohm	4 mm
MAX303CPE+	Analog Devices	SPDT	COMMERCIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	1	CMOS		THROUGH-HOLE	-20 V	-15 V	15 V	5,+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1	20 V	4.572 mm		7.62 mm	Not Qualified		72 dB	4.5 V	ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY	-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	35 ohm	100 ns	.5 ohm	19.175 mm
MAX4636ETB+T	Analog Devices	SPDT	INDUSTRIAL	10	HVSON	SQUARE	YES	UNSPECIFIED		2	1	CMOS		NO LEAD			3 V	3/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-XDSO-N10	SEPARATE OUTPUT	1	5.5 V	.8 mm		3 mm	Not Qualified		52 dB	1.8 V			e3	BREAK-BEFORE-MAKE	30	260	18 ns	5.5 ohm	8 ns	.1 ohm	3 mm
MAX4625EUT+T	Analog Devices	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			5 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.625 mm	Not Qualified		57 dB	1.8 V	IT CAN ALSO OPERATE WITH 3 V SUPPLY		e3	MAKE-BEFORE-BREAK	30	260	50 ns	1 ohm	50 ns	.06 ohm	2.9 mm
MAX4053ACSE+T	Analog Devices	SPDT	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1	CMOS		GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	100 ohm	150 ns	6 ohm	9.9 mm
MAX4736ETC+	Analog Devices	SPDT	INDUSTRIAL	12	HVQCCN	SQUARE	YES	UNSPECIFIED		2	1	CMOS		NO LEAD			3 V	1.8/3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N12	SEPARATE OUTPUT	1	3.6 V	.9 mm		3 mm	Not Qualified		52 dB	1.6 V			e3	BREAK-BEFORE-MAKE	30	260	25 ns	.8 ohm	20 ns	.1 ohm	3 mm
MAX4556ESE+T	Analog Devices	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1	CMOS		GULL WING	-20 V	-15 V	15 V	5,+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified		30 dB	4.5 V		-4.5 V	e3		30	260	250 ns	60 ohm	250 ns	5 ohm	9.9 mm
DG419DJ-T	Analog Devices	SPDT
MAX4533CAP+T	Analog Devices	SPDT	COMMERCIAL	20	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1			GULL WING	-18 V	-15 V	15 V	12/+-15	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	Multiplexer or Switches	.65 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1	18 V	1.99 mm		5.29 mm	Not Qualified		62 dB	4.5 V	CAN ALSO OPERATE AT 12V NOMINAL	-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	250 ns	175 ohm	150 ns	6 ohm	7.2 mm
ADG1219BRJZ-R2	Analog Devices	SPDT	AUTOMOTIVE	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	SEPARATE OUTPUT		16.5 V	1.45 mm		1.6 mm	Not Qualified		77 dB	13.5 V		-13.5 V	e3	BREAK-BEFORE-MAKE			140 ns	270 ohm	170 ns	3.5 ohm	2.9 mm
ADG820BRT-REEL7	Analog Devices	SPDT	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.65 mm	Not Qualified		71 dB	1.8 V			e0	MAKE-BEFORE-BREAK		240	35 ns	1.4 ohm	45 ns	.06 ohm	2.9 mm
AD7592DIKNZ	Analog Devices	SPDT	COMMERCIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	1.5 mA	2	1	CMOS		THROUGH-HOLE		-15 V	15 V		IN-LINE			2.54 mm	70 Cel	0 Cel	MATTE TIN	DUAL	R-PDIP-T14				5.33 mm		7.62 mm	Not Qualified		85 dB		OVERVOLTAGE PROTECTION		e3				350 ns	90 ohm	350 ns	2 ohm	19.305 mm
ADG736LBRMZ-REEL	Analog Devices	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified		82 dB	1.8 V			e3	BREAK-BEFORE-MAKE		260	20 ns	8 ohm	10 ns	.1 ohm	3 mm
ADG884BCB-REEL7	Analog Devices	SPDT	INDUSTRIAL	10	VFBGA	RECTANGULAR	YES	UNSPECIFIED		2	1	CMOS		BALL			2.7 V	5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA10,3X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	BOTTOM	R-XBGA-B10	SEPARATE OUTPUT		5.5 V	.63 mm		1.6 mm	Not Qualified	NC	60 dB	1.8 V			e0	BREAK-BEFORE-MAKE			56 ns	.5 ohm	19 ns	.02 ohm	2 mm
ADG733BRQZ	Analog Devices	SPDT	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-2.5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	2.75 V	1.7526 mm		3.9116 mm	Not Qualified		72 dB	2.25 V	ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY	-2.25 V	e3	BREAK-BEFORE-MAKE		260	35 ns	4.5 ohm	16 ns	.1 ohm	4.9022 mm
ADG936BRU-REEL	Analog Devices	SPDT	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			2.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20		1	2.75 V	1.2 mm		4.4 mm	Not Qualified		36 dB	1.65 V			e0			240	14 ns		13 ns		6.5 mm
ADG819BCB-REEL7	Analog Devices	SPDT	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	UNSPECIFIED		1	1	CMOS		BALL			3 V	3/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	BOTTOM	R-XBGA-B6		1	5.5 V	.67 mm		1.14 mm	Not Qualified		71 dB	1.8 V			e0	BREAK-BEFORE-MAKE			60 ns	1.4 ohm	16 ns	.06 ohm	2.18 mm
AD7592DITQ	Analog Devices	SPDT	MILITARY	14	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED	2 mA	2	1	CMOS		THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T14	SEPARATE OUTPUT			5.08 mm		7.62 mm	Not Qualified		85 dB		OVERVOLTAGE PROTECTION		e0	BREAK-BEFORE-MAKE			350 ns	90 ohm	350 ns	2 ohm	19.43 mm
ADG619SRJZ-EP-RL7	Analog Devices	SPDT	MILITARY	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	5/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Multiplexer or Switches	.65 mm	125 Cel	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8		1	5.5 V	1.45 mm		1.6 mm	Not Qualified		67 dB	2.7 V		-2.7 V	e4	BREAK-BEFORE-MAKE	30	260	215 ns	6.5 ohm	105 ns	.7 ohm	2.9 mm
ADG333ABNZ	Analog Devices	SPDT	INDUSTRIAL	20	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.35 mA	4	1	BICMOS		THROUGH-HOLE		-15 V	15 V		IN-LINE			2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T20				5.33 mm		7.62 mm	Not Qualified		72 dB				e3				175 ns	45 ohm	145 ns	4 ohm	25.2 mm
AD7512DIKQ	Analog Devices	SPDT	INDUSTRIAL	14	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		2	1	CMOS		THROUGH-HOLE		-15 V	15 V	+-15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	85 Cel	-25 Cel	TIN LEAD	DUAL	R-GDIP-T14	SEPARATE OUTPUT			6.3 mm		7.62 mm	Not Qualified	NO/NC			OVERVOLTAGE PROTECTION		e0					175 ohm		.75 ohm	17.27 mm
AD7512DITE/883B	Analog Devices	SPDT	MILITARY	20	QCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED		2	1	CMOS	MIL-STD-883 Class B	NO LEAD		-15 V	15 V	+-15	CHIP CARRIER	LCC20,.35SQ	Multiplexer or Switches	1.27 mm	125 Cel	-55 Cel	GOLD	QUAD	S-CQCC-N20	SEPARATE OUTPUT			2.54 mm		8.89 mm	Not Qualified	NO/NC			OVERVOLTAGE PROTECTION		e4				1000 ns	175 ohm	1000 ns	.75 ohm	8.89 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.