SPDT Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length
ADG819BRT-REEL7	Analog Devices	SPDT	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		1.65 mm	Not Qualified		71 dB	1.8 V			e0	BREAK-BEFORE-MAKE		240	60 ns	1.4 ohm	16 ns	.06 ohm	2.9 mm
ADG1236YRU	Analog Devices	SPDT	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.1 mm		4.4 mm	Not Qualified		75 dB	13.5 V		-13.5 V	e0	BREAK-BEFORE-MAKE	30	240		120 ohm		5 ohm	5 mm
ADG836YCP-REEL7	Analog Devices	SPDT	AUTOMOTIVE	12	HVQCCN	SQUARE	YES	UNSPECIFIED		2	2	CMOS		NO LEAD			1.8 V	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.12SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N12	SEPARATE OUTPUT	3	1.95 V	1 mm		3 mm	Not Qualified	NO/NC	67 dB	1.65 V	CAN ALSO OPERATE WITH 2.5V AND 3.3V SUPPLIES		e0	BREAK-BEFORE-MAKE		240	37 ns	1.4 ohm	9 ns	.1 ohm	3 mm
ADG859BRYZ-REEL7	Analog Devices	SPDT	INDUSTRIAL	6	VSON	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		NO LEAD			2.7 V	3/5	SMALL OUTLINE, VERY THIN PROFILE	TSSOP6,.06,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-N6		1	5.5 V	.6 mm		1.65 mm	Not Qualified		78 dB	1.8 V			e3	BREAK-BEFORE-MAKE			15 ns	4.3 ohm	9.5 ns	.03 ohm	1.66 mm
ADG936BCPZ-R-REEL	Analog Devices	SPDT	INDUSTRIAL	20	HVQCCN	SQUARE	YES	UNSPECIFIED		2	1	CMOS		NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N20		3	2.75 V	1 mm		4 mm	Not Qualified		36 dB	1.65 V			e3				14 ns		13 ns		4 mm
ADG1236YRUZ-REEL7	Analog Devices	SPDT	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	16.5 V	1.2 mm		4.4 mm	Not Qualified		80 dB	13.5 V		-13.5 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	190 ohm		3.5 ohm	5 mm
ADG1334BRSZ-REEL	Analog Devices	SPDT	INDUSTRIAL	20	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-16.5 V	-15 V	15 V	12/+-15	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	Multiplexer or Switches	.65 mm	105 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1	16.5 V	2 mm		5.3 mm	Not Qualified		80 dB	13.5 V		-13.5 V	e3	BREAK-BEFORE-MAKE		260	130 ns	200 ohm	85 ns	5 ohm	7.2 mm
ADG733BRQZ-REEL7	Analog Devices	SPDT	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-2.5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	2.75 V	1.7526 mm		3.9116 mm	Not Qualified		72 dB	2.25 V	ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY	-2.25 V	e3	BREAK-BEFORE-MAKE		260	35 ns	4.5 ohm	16 ns	.1 ohm	4.9022 mm
ADG1436YRUZ-REEL	Analog Devices	SPDT	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	+-5/+12/+-15	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm		4.4 mm	Not Qualified		50 dB	4.5 V	CAN ALSO OPERATES AT 12 V AND +/-15 V SUPPLY	-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	105 ns	4 ohm	125 ns	.1 ohm	5 mm
ADG5243FBRUZ	Analog Devices	SPDT	AUTOMOTIVE	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1			GULL WING	-22 V	-15 V	15 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G20		1	22 V	1.2 mm		4.4 mm				5 V		-5 V	e3		30	260		250 ohm		4 ohm	6.5 mm
ADG1439BCPZ-REEL7	Analog Devices	SPDT	AUTOMOTIVE	20	HVQCCN	SQUARE	YES	UNSPECIFIED	.001 mA	2	1	CMOS		NO LEAD	-16.5 V	-5 V	5 V	+-5/+-15/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N20		3	16.5 V	1 mm	.03 A	4 mm	Not Qualified		70 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	350 ns	25 ohm	350 ns	.6 ohm	4 mm
AD7512DIKP-REEL	Analog Devices	SPDT	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1		4.57 mm		8.966 mm	Not Qualified				OVERVOLTAGE PROTECTION		e0			225		100 ohm		.75 ohm	8.966 mm
ADG884BCB-REEL	Analog Devices	SPDT	INDUSTRIAL	10	VFBGA	RECTANGULAR	YES	UNSPECIFIED		2	1	CMOS		BALL			2.7 V	5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA10,3X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	BOTTOM	R-XBGA-B10	SEPARATE OUTPUT		5.5 V	.63 mm		1.6 mm	Not Qualified	NC	60 dB	1.8 V			e0	BREAK-BEFORE-MAKE			56 ns	.5 ohm	19 ns	.02 ohm	2 mm
ADG836LYRMZ	Analog Devices	SPDT	AUTOMOTIVE	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			2.7 V	1.8/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	3.6 V	1.1 mm		3 mm	Not Qualified		67 dB	1.65 V			e3	BREAK-BEFORE-MAKE		260	26 ns	.65 ohm	7 ns	.04 ohm	3 mm
AD7512DIKN/883B	Analog Devices	SPDT	COMMERCIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	1	CMOS	MIL-STD-883 Class B	THROUGH-HOLE		-15 V	15 V		IN-LINE	DIP14,.3		2.54 mm	70 Cel	0 Cel		DUAL	R-PDIP-T14	SEPARATE OUTPUT			4.32 mm		7.62 mm		NO/NC			OVERVOLTAGE PROTECTION							175 ohm		.75 ohm	16.51 mm
ADG819BRM	Analog Devices	SPDT	AUTOMOTIVE	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	Tin/Lead (Sn85Pb15)	DUAL	S-PDSO-G8		1	5.5 V	1.09 mm		3 mm	Not Qualified		71 dB	1.8 V			e0	BREAK-BEFORE-MAKE	30	240	60 ns	1.4 ohm	16 ns	.06 ohm	3 mm
ADG936BCPZ-REEL7	Analog Devices	SPDT	INDUSTRIAL	20	HVQCCN	SQUARE	YES	UNSPECIFIED		2	1	CMOS		NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N20			2.75 V	1 mm		4 mm	Not Qualified		36 dB	1.65 V			e3				14 ns		13 ns		4 mm
ADG333ABR-REEL	Analog Devices	SPDT	INDUSTRIAL	20	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.35 mA	4	1	BICMOS		GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE	SOP20,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1		2.65 mm		7.5 mm	Not Qualified		72 dB				e0	BREAK-BEFORE-MAKE		240	175 ns	45 ohm	145 ns	4 ohm	12.8 mm
ADG852BCPZ-REEL	Analog Devices	SPDT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	UNSPECIFIED		1	1	CMOS		NO LEAD			2.7 V	3/5	CHIP CARRIER, VERY THIN PROFILE	LCC10,.05X.06,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	R-XQCC-N10	SEPARATE OUTPUT	1	5.5 V	.6 mm		1.3 mm	Not Qualified	NO/NC	75 dB	1.8 V			e3	BREAK-BEFORE-MAKE		260	43 ns	1.5 ohm	8 ns	.03 ohm	1.6 mm
ADG5233BRUZ-RL7	Analog Devices	SPDT	AUTOMOTIVE	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1	CMOS		GULL WING	-22 V	-15 V	15 V	+-9/+-22/9/40	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	125 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	22 V	1.2 mm		4.4 mm	Not Qualified		75 dB	9 V	VIDEO APPLICATION	-9 V	e3	BREAK-BEFORE-MAKE	30	260	290 ns	200 ohm	125 ns	3.5 ohm	5 mm
ADG620BRM	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	+-3/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	COMMON OUTPUT	1	5.5 V	1.1 mm	.05 A	3 mm	Not Qualified	NO	67 dB	2.7 V	ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY	-2.7 V	e0	MAKE-BEFORE-BREAK		240	65 ns	6.5 ohm	330 ns	.7 ohm	3 mm
AD7512DISE/883B	Analog Devices	SPDT	MILITARY	20	QCCN	SQUARE	YES	CERAMIC, METAL-SEALED COFIRED	.8 mA	2	1	CMOS		NO LEAD		-15 V	15 V	+-15	CHIP CARRIER	LCC20,.35SQ	Multiplexer or Switches	1.27 mm	125 Cel	-55 Cel	TIN LEAD	QUAD	S-CQCC-N20	SEPARATE OUTPUT			2.54 mm		8.89 mm	Not Qualified				OVERVOLTAGE PROTECTION		e0				1000 ns	100 ohm	1000 ns		8.89 mm
ADG819BRT-R2	Analog Devices	SPDT	AUTOMOTIVE	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6			5.5 V	1.45 mm		1.65 mm	Not Qualified		71 dB	1.8 V			e0	BREAK-BEFORE-MAKE			60 ns	1.4 ohm	16 ns	.06 ohm	2.9 mm
ADG936BRUZ-REEL	Analog Devices	SPDT	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			2.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G20		1	2.75 V	1.2 mm		4.4 mm	Not Qualified		36 dB	1.65 V			e3			260	14 ns		13 ns		6.5 mm
ADG936BRU	Analog Devices	SPDT	INDUSTRIAL	20	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			2.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20		1	2.75 V	1.2 mm		4.4 mm	Not Qualified		36 dB	1.65 V			e0			240	14 ns		13 ns		6.5 mm
ADG436BNZ	Analog Devices	SPDT	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	1	CMOS		THROUGH-HOLE		-15 V	15 V	12/+-15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T16				5.33 mm		7.62 mm	Not Qualified		72 dB				e3	BREAK-BEFORE-MAKE			125 ns	25 ohm	120 ns	1 ohm	20.07 mm
ADG620BRM-REEL	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.001 mA	1	1	CMOS		GULL WING	-5.5 V	-5 V	5 V	+-3/+-5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	COMMON OUTPUT	1	5.5 V	1.1 mm	.05 A	3 mm	Not Qualified	NO	67 dB	2.7 V	ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY	-2.7 V	e0	MAKE-BEFORE-BREAK		240	65 ns	6.5 ohm	330 ns	.7 ohm	3 mm
ADG936BCPZ-RL	Analog Devices	SPDT	INDUSTRIAL	20	HVQCCN	SQUARE	YES	UNSPECIFIED		2	1	CMOS		NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N20		3	2.75 V	1 mm		4 mm	Not Qualified		36 dB	1.65 V			e3			260	14 ns		13 ns		4 mm
ADG733BRQZ-REEL	Analog Devices	SPDT	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1	CMOS		GULL WING	-2.75 V	-2.5 V	2.5 V	3/5/+-2.5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	2.75 V	1.7526 mm		3.9116 mm	Not Qualified		72 dB	2.25 V	ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY	-2.25 V	e3	BREAK-BEFORE-MAKE		260	35 ns	4.5 ohm	16 ns	.1 ohm	4.9022 mm
ADG786WBCPZ-REEL7	Analog Devices	SPDT	INDUSTRIAL	20	HVQCCN	SQUARE	YES	UNSPECIFIED		3	1	CMOS		NO LEAD	-2.75 V	-2.5 V	2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N20		3	2.75 V	1 mm		4 mm			72 dB	2.25 V	5 VOLT NOMINAL VOLTAGE ALSO AVAILABLE	-2.25 V	e3		30	260	35 ns	4.5 ohm	16 ns	.1 ohm	4 mm
ADG819BCBZ-REEL	Analog Devices	SPDT	INDUSTRIAL	6	VFBGA	RECTANGULAR	YES	UNSPECIFIED		1	1	CMOS		BALL			3 V	3/5	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA6,2X3,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-XBGA-B6		1	5.5 V	.67 mm		1.14 mm	Not Qualified		71 dB	1.8 V			e1	BREAK-BEFORE-MAKE		260	60 ns	1.4 ohm	16 ns	.06 ohm	2.18 mm
ADG633YCP-REEL7	Analog Devices	SPDT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		3	1	CMOS		NO LEAD	-6 V	-5 V	5 V	3/5/+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16	SEPARATE OUTPUT	3	6 V	1 mm		4 mm	Not Qualified		90 dB	2 V	ALSO OPERATES WITH 2V TO 12V SINGLE SUPPLY	-2 V	e0	BREAK-BEFORE-MAKE		240	95 ns	75 ohm	40 ns	.8 ohm	4 mm
ADG436BR	Analog Devices	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING		-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		1		1.75 mm		3.9 mm	Not Qualified		72 dB				e0	BREAK-BEFORE-MAKE		240	125 ns	25 ohm	120 ns	1 ohm	9.9 mm
ADG779BKS	Analog Devices	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G6			5.5 V	1.1 mm		1.25 mm	Not Qualified		67 dB	1.8 V			e0	BREAK-BEFORE-MAKE	30	220	24 ns	10 ohm	7 ns	.1 ohm	2 mm
DG301AA	Analog Devices	SPDT	MILITARY	10		ROUND	NO	METAL		1	1	CMOS		WIRE	-18 V	-15 V	15 V	+-15	CYLINDRICAL	CAN10,.23	Multiplexer or Switches		125 Cel	-55 Cel	TIN LEAD	BOTTOM	O-MBCY-W10			18 V				Not Qualified		62 dB	5 V		-5 V	e0	BREAK-BEFORE-MAKE			300 ns	50 ohm	250 ns
DG301ACWE+T	Analog Devices	SPDT	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING	-18 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	18 V	2.65 mm		7.5 mm	Not Qualified		62 dB	5 V		-5 V	e3	BREAK-BEFORE-MAKE	30	260	300 ns	50 ohm	250 ns		10.3 mm
MAX4906ELB+	Analog Devices	SPDT	INDUSTRIAL	10	HVSON	SQUARE	YES	UNSPECIFIED		2	2	BICMOS		NO LEAD			3.3 V	3.3	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.08,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	GOLD NICKEL	DUAL	S-XDSO-N10	SEPARATE OUTPUT	1	3.6 V	.8 mm		2 mm	Not Qualified		26 dB	3 V			e4	BREAK-BEFORE-MAKE	30	260	60 ns	8 ohm	30 ns	.7 ohm	2 mm
MAX394EWP+T	Analog Devices	SPDT	INDUSTRIAL	20	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-8 V	-5 V	5 V	3.3/5/+-5	SMALL OUTLINE	SOP20,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1	8 V	2.65 mm		7.5 mm	Not Qualified		66 dB	2.4 V		-2.4 V	e3	BREAK-BEFORE-MAKE	30	260	130 ns	35 ohm	75 ns	.5 ohm	12.8 mm
MAX4619CPE+	Analog Devices	SPDT																							Matte Tin (Sn) - annealed				1											e3		30	260
MAX4053EEE+	Analog Devices	SPDT	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1	CMOS		GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	100 ohm	150 ns	12 ohm	4.9 mm
MAX4948ERA+T	Analog Devices	SPDT	INDUSTRIAL	25	VFBGA	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		BALL			3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B25		1	5.5 V	.69 mm		2.56 mm			70 dB	1.8 V			e1		30	260	800 ns	5.5 ohm	800 ns	.3 ohm	2.56 mm
MAX14763ETA+	Analog Devices	SPDT	INDUSTRIAL	8	HVSON	SQUARE	YES	PLASTIC/EPOXY		1	1	BICMOS		NO LEAD			5 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-N8		1	5.5 V	.8 mm		3 mm			77 dB	3 V			e3		30	260	1800000 ns	2 ohm	1000000 ns	.0051 ohm	3 mm
MAX333EWP+	Analog Devices	SPDT	INDUSTRIAL	20	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-18 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP20,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1	18 V	2.65 mm		7.5 mm	Not Qualified		72 dB	5 V		-5 V	e3	BREAK-BEFORE-MAKE	30	260	1000 ns	175 ohm	500 ns		12.8 mm
DG403CY+T	Analog Devices	SPDT	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-20 V	-15 V	15 V	5,+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	72 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	55 ohm	100 ns	.5 ohm	9.9 mm
DG403AK/883B	Analog Devices	SPDT	MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		2	1	CMOS	MIL-STD-883 Class B	THROUGH-HOLE	-20 V	-15 V	15 V	5,+-15	IN-LINE	LCC20,.35SQ	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T16	SEPARATE OUTPUT	1	20 V	5.08 mm		7.62 mm	Not Qualified	NO/NC	72 dB	4.5 V		-4.5 V	e0	BREAK-BEFORE-MAKE			150 ns	45 ohm	100 ns	.5 ohm
MAX4888AETI+G3U	Analog Devices	SPDT																																								NOT SPECIFIED	NOT SPECIFIED
MAX4730ELT+T	Analog Devices	SPDT	INDUSTRIAL	6	VSON	RECTANGULAR	YES	UNSPECIFIED		1	1	CMOS		NO LEAD			2.7 V		SMALL OUTLINE, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	GOLD NICKEL	DUAL	R-XDSO-N6		1	5.5 V	.8 mm		1 mm	Not Qualified		45 dB	1.8 V			e4		30	260	45 ns	5.5 ohm	26 ns	.02 ohm	1.5 mm
MAX4624EUT+	Analog Devices	SPDT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING			5 V		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6		1	5.5 V	1.45 mm		2.8 mm			57 dB	1.8 V			e3		30	260	60 ns	1 ohm	60 ns	.12 ohm	2.9 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.