SPDT Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length
DG419AK/883B	Analog Devices	SPDT	MILITARY	8	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		1	1	CMOS	MIL-STD-883 Class B	THROUGH-HOLE	-20 V	-15 V	15 V	5,12/+-15	IN-LINE	DIP8,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T8	SEPARATE OUTPUT	1	20 V	5.08 mm		7.62 mm	Not Qualified		68 dB	4.5 V		-4.5 V	e0	BREAK-BEFORE-MAKE			250 ns	30 ohm	210 ns	3 ohm
DG303BK	Analog Devices	SPDT	OTHER	14	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		2	2	CMOS		THROUGH-HOLE	-18 V	-15 V	15 V	+-15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	85 Cel	-25 Cel	TIN LEAD	DUAL	R-GDIP-T14	SEPARATE OUTPUT		18 V	5.08 mm		7.62 mm	Not Qualified		62 dB	5 V		-5 V	e0	BREAK-BEFORE-MAKE			300 ns	50 ohm	250 ns		19.43 mm
DG301C/D	Analog Devices	SPDT	COMMERCIAL	12	DIE	SQUARE	YES	UNSPECIFIED		1	1	CMOS		NO LEAD	-18 V	-15 V	15 V	+-15	UNCASED CHIP	DIE OR CHIP	Multiplexer or Switches		70 Cel	0 Cel	TIN LEAD	UPPER	S-XUUC-N12			18 V				Not Qualified		62 dB	5 V		-5 V	e0	BREAK-BEFORE-MAKE			300 ns	50 ohm	250 ns
MAX333AMJP/883B	Analog Devices	SPDT	MILITARY	20	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		4	1	CMOS		THROUGH-HOLE		-15 V	15 V		IN-LINE			2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T20		1		5.08 mm		7.62 mm	Not Qualified		72 dB				e0				175 ns	35 ohm	145 ns	2 ohm
MAX4684ETB+T	Analog Devices	SPDT	INDUSTRIAL	10	HVSON	SQUARE	YES	UNSPECIFIED		1	2	BICMOS		NO LEAD			3 V	3	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-XDSO-N10	SEPARATE OUTPUT	1	3.3 V	.8 mm		3 mm	Not Qualified		64 dB	2.7 V			e3	BREAK-BEFORE-MAKE	30	260	60 ns	.8 ohm	40 ns	.06 ohm	3 mm
MAX4702ETE+	Analog Devices	SPDT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		4	1	CMOS		NO LEAD			3 V	3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16	SEPARATE OUTPUT	1	5.5 V	.8 mm		3 mm	Not Qualified		76 dB	1.8 V			e3	BREAK-BEFORE-MAKE	30	260	45 ns	75 ohm	25 ns	2 ohm	3 mm
MAX4635ETB+	Analog Devices	SPDT																							Matte Tin (Sn) - annealed				1											e3		30	260
DG301AAA/HR	Analog Devices	SPDT	MILITARY	10		ROUND		METAL		1		CMOS	MIL-STD-883 Class B (Modified)	WIRE		-15 V	15 V	+-15	CYLINDRICAL	CAN10,.23	Multiplexer or Switches		125 Cel	-55 Cel	TIN LEAD	BOTTOM	O-MBCY-W10							Not Qualified						e0	BREAK-BEFORE-MAKE	20	240	300 ns	75 ohm
MAX4636ETB+	Analog Devices	SPDT	INDUSTRIAL	10	HVSON	SQUARE	YES	UNSPECIFIED		2	1	CMOS		NO LEAD			3 V	3/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-XDSO-N10	SEPARATE OUTPUT	1	5.5 V	.8 mm		3 mm	Not Qualified		52 dB	1.8 V			e3	BREAK-BEFORE-MAKE	30	260	18 ns	5.5 ohm	8 ns	.1 ohm	3 mm
MAX4622CSE+	Analog Devices	SPDT	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-18 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	20 V	1.75 mm		3.9 mm	Not Qualified		62 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	250 ns	5 ohm	200 ns	.25 ohm	9.9 mm
MAX4764EUB+T	Analog Devices	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	BICMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified	NO/NC	65 dB	1.8 V			e3	BREAK-BEFORE-MAKE	30	260	80 ns	.85 ohm	70 ns	.05 ohm	3 mm
MAX4745ELB+	Analog Devices	SPDT	INDUSTRIAL	10	VSON	SQUARE	YES	PLASTIC/EPOXY		1	1	BICMOS		NO LEAD			3.3 V		SMALL OUTLINE, VERY THIN PROFILE			.4 mm	85 Cel	-40 Cel	GOLD NICKEL	DUAL	S-PDSO-N10		1	5.5 V	.8 mm		2 mm			68 dB	1.8 V			e4		30	260					2 mm
DG303AK	Analog Devices	SPDT	MILITARY	14	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		2	2	CMOS		THROUGH-HOLE	-18 V	-15 V	15 V	+-15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T14	SEPARATE OUTPUT		18 V	5.08 mm		7.62 mm	Not Qualified		62 dB	5 V		-5 V	e0	BREAK-BEFORE-MAKE			300 ns	50 ohm	250 ns		19.43 mm
MAX4532CWP+	Analog Devices	SPDT	COMMERCIAL	20	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	3	1	CMOS		GULL WING	-6 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE	SOP20,.4	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20		1	6 V	2.65 mm	.02 A	7.5 mm	Not Qualified		65 dB	2 V		-2 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	100 ohm	150 ns	1 ohm	12.8 mm
MAX394EWP+	Analog Devices	SPDT	INDUSTRIAL	20	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING	-8 V	-5 V	5 V	3.3/5/+-5	SMALL OUTLINE	SOP20,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1	8 V	2.65 mm		7.5 mm	Not Qualified		66 dB	2.4 V		-2.4 V	e3	BREAK-BEFORE-MAKE	30	260	130 ns	35 ohm	75 ns	.5 ohm	12.8 mm
MAX4053AESE+	Analog Devices	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1	CMOS		GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	100 ohm	150 ns	6 ohm	9.9 mm
MAX4750EWE+T	Analog Devices	SPDT	INDUSTRIAL	16	FBGA	SQUARE	YES	PLASTIC/EPOXY		2		CMOS		BALL				3/5	GRID ARRAY, FINE PITCH	BGA16,4X4,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		BOTTOM	S-PBGA-B16	SEPARATE OUTPUT						Not Qualified							BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED	170 ns	60 ohm
MAX4583LESE+T	Analog Devices	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	3	1	CMOS		GULL WING	-6 V	-5 V	5 V	2/12.6	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	6 V	1.75 mm		3.9 mm	Not Qualified		73 dB	2 V		-2 V	e3	BREAK-BEFORE-MAKE			200 ns	80 ohm	200 ns	1 ohm	9.9 mm
MAX4624EZT+	Analog Devices	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING			5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.95 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm		1.6 mm	Not Qualified		57 dB	1.8 V			e3		30	260	50 ns	1 ohm	50 ns	.06 ohm	2.9 mm
MAX4544EUA+T	Analog Devices	SPDT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			5 V	3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8		1	12 V	1.1 mm		3 mm	Not Qualified		76 dB	2.7 V			e3	BREAK-BEFORE-MAKE	30	260	100 ns	60 ohm	75 ns	.8 ohm	3 mm
DG305BK	Analog Devices	SPDT	OTHER	14	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		1	1	CMOS		THROUGH-HOLE	-18 V	-15 V	15 V	+-15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	85 Cel	-25 Cel	TIN LEAD	DUAL	R-GDIP-T14			18 V	5.08 mm		7.62 mm	Not Qualified		62 dB	5 V		-5 V	e0	BREAK-BEFORE-MAKE			250 ns	50 ohm	150 ns		19.43 mm
MAX4533CWP+	Analog Devices	SPDT	COMMERCIAL	20	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1			GULL WING	-18 V	-15 V	15 V	12/+-15	SMALL OUTLINE	SOP20,.4	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	SEPARATE OUTPUT	1	18 V	2.65 mm		7.5 mm	Not Qualified		62 dB	4.5 V	CAN ALSO OPERATE AT 12V NOMINAL	-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	250 ns	175 ohm	150 ns	6 ohm	12.8 mm
DG305AK	Analog Devices	SPDT	MILITARY	14	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		1	1	CMOS		THROUGH-HOLE	-18 V	-15 V	15 V	+-15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T14			18 V	5.08 mm		7.62 mm	Not Qualified		62 dB	5 V		-5 V	e0	BREAK-BEFORE-MAKE			250 ns	50 ohm	150 ns		19.43 mm
DG301AAZ/883	Analog Devices	SPDT	MILITARY	20	QCCN	SQUARE	YES	CERAMIC		1		CMOS	38535Q/M;38534H;883B	NO LEAD		-15 V	15 V	+-15	CHIP CARRIER	LCC20,.35SQ	Multiplexer or Switches	1.27 mm	125 Cel	-55 Cel	TIN LEAD	QUAD	S-XQCC-N20							Not Qualified						e0	BREAK-BEFORE-MAKE			300 ns	75 ohm
MAX4906ETB+	Analog Devices	SPDT	INDUSTRIAL	10	HVSON	SQUARE	YES	UNSPECIFIED		2	2	BICMOS		NO LEAD			3.3 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-XDSO-N10		1	3.6 V	.8 mm		3 mm	Not Qualified		26 dB	3 V			e3		30	260	60 ns	8 ohm	30 ns	.7 ohm	3 mm
DG307ABWE	Analog Devices	SPDT	OTHER	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING	-18 V	-15 V	15 V	+-15	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	85 Cel	-25 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT		18 V	2.65 mm		7.5 mm	Not Qualified		62 dB	5 V		-5 V	e0	BREAK-BEFORE-MAKE			250 ns	50 ohm	150 ns		10.3 mm
MAX4764ETB+	Analog Devices	SPDT	INDUSTRIAL	10	HVSON	SQUARE	YES	PLASTIC/EPOXY		2	1	BICMOS		NO LEAD			3 V	3/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.11,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-N10	SEPARATE OUTPUT	1	5.5 V	.8 mm		3 mm	Not Qualified	NO/NC	65 dB	1.8 V			e3	BREAK-BEFORE-MAKE	30	260	80 ns	.85 ohm	70 ns	.05 ohm	3 mm
MAX4544CSA+	Analog Devices	SPDT	COMMERCIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			5 V	3.3/5	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8		1	12 V	1.75 mm		3.9 mm	Not Qualified		76 dB	2.7 V			e3	BREAK-BEFORE-MAKE	30	260	100 ns	60 ohm	75 ns	.8 ohm	4.9 mm
DG307CJ	Analog Devices	SPDT	COMMERCIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	1	CMOS		THROUGH-HOLE	-18 V	-15 V	15 V	+-15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDIP-T14	SEPARATE OUTPUT		18 V	4.572 mm		7.62 mm	Not Qualified		62 dB	5 V		-5 V	e0	BREAK-BEFORE-MAKE			250 ns	50 ohm	150 ns		19.05 mm
MAX4744HELB+	Analog Devices	SPDT	INDUSTRIAL	10	VSON	SQUARE	YES	PLASTIC/EPOXY		2	1	BICMOS		NO LEAD			3.3 V		SMALL OUTLINE, VERY THIN PROFILE			.4 mm	85 Cel	-40 Cel	GOLD NICKEL	DUAL	S-PDSO-N10		1	5.5 V	.8 mm		2 mm	Not Qualified		68 dB	1.8 V			e4		30	260	55 ns	.95 ohm	36 ns	.1 ohm	2 mm
MAX4560ESE+T	Analog Devices	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	3	1	CMOS		GULL WING	-6 V	-5 V	5 V	3/3.3/5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	6 V	1.75 mm	.01 A	3.9 mm	Not Qualified		96 dB	2 V		-2 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	160 ohm	120 ns	2 ohm	9.9 mm
MAX4625EZT+T	Analog Devices	SPDT	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			GULL WING			5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.95 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6		1	5.5 V	1.1 mm		1.6 mm	Not Qualified		57 dB	1.8 V			e3		30	260	50 ns	1 ohm	50 ns	.06 ohm	2.9 mm
MAX4053EEE+T	Analog Devices	SPDT	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1	CMOS		GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	100 ohm	150 ns	12 ohm	4.9 mm
MAX4619EUE+	Analog Devices	SPDT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	3	1	CMOS		GULL WING			3.3 V	2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	3.6 V	1.1 mm	.075 A	4.4 mm	Not Qualified			3 V			e3	BREAK-BEFORE-MAKE	30	260	20 ns	20 ohm	15 ns		5 mm
MAX4904EBL+	Analog Devices	SPDT																							TIN SILVER COPPER				1											e1		30	260
MAX4533CPP+	Analog Devices	SPDT	COMMERCIAL	20	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1			THROUGH-HOLE	-18 V	-15 V	15 V	12/+-15	IN-LINE	DIP20,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T20	SEPARATE OUTPUT	1	18 V	4.572 mm		7.62 mm	Not Qualified		62 dB	4.5 V	CAN ALSO OPERATE AT 12V NOMINAL	-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	250 ns	175 ohm	150 ns	6 ohm	26.16 mm
MAX4762EBC+T	Analog Devices	SPDT	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY		2	1	BICMOS		BALL			3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-PBGA-B12		1	5.5 V	.67 mm		1.54 mm	Not Qualified		65 dB	1.8 V			e1		30	260	80 ns	.85 ohm	70 ns	.05 ohm	2.02 mm
MAX4635EUB+	Analog Devices	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			3 V	3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	5.5 V	1.1 mm		3 mm	Not Qualified		52 dB	1.8 V			e3	BREAK-BEFORE-MAKE	30	260	18 ns	5.5 ohm	8 ns	.1 ohm	3 mm
MAX4736EUB+	Analog Devices	SPDT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		GULL WING			1.8 V	1.8/3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G10	SEPARATE OUTPUT	1	3.6 V	1.1 mm		3 mm	Not Qualified		52 dB	1.6 V			e3	BREAK-BEFORE-MAKE	30	260	30 ns	2 ohm	25 ns		3 mm
MAX4053CSE+T	Analog Devices	SPDT	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1	CMOS		GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	100 ohm	150 ns	12 ohm	9.9 mm
MAX4619CUE+	Analog Devices	SPDT	COMMERCIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	3	1	CMOS		GULL WING			3.3 V	2.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	3.6 V	1.1 mm	.075 A	4.4 mm	Not Qualified			3 V			e3	BREAK-BEFORE-MAKE	30	260	20 ns	20 ohm	15 ns		5 mm
MAX4544CSA+T	Analog Devices	SPDT	COMMERCIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	1	CMOS		GULL WING			5 V	3.3/5	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8		1	12 V	1.75 mm		3.9 mm	Not Qualified		76 dB	2.7 V			e3	BREAK-BEFORE-MAKE	30	260	100 ns	60 ohm	75 ns	.8 ohm	4.9 mm
MAX4053CEE+T	Analog Devices	SPDT	COMMERCIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	1	CMOS		GULL WING	-8 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	8 V	1.75 mm		3.9 mm	Not Qualified		90 dB	2.7 V		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	100 ohm	150 ns	12 ohm	4.9 mm
MAX383CSE+T	Analog Devices	SPDT	COMMERCIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.001 mA	2	1	CMOS		GULL WING		-5 V	5 V	+-5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.75 mm		3.9 mm	Not Qualified		72 dB				e3	BREAK-BEFORE-MAKE	30	260	175 ns	35 ohm	100 ns	.5 ohm	9.9 mm
MAX4560EEE+	Analog Devices	SPDT	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	3	1	CMOS		GULL WING	-6 V	-5 V	5 V	3/3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		1	6 V	1.75 mm	.01 A	3.9 mm	Not Qualified		96 dB	2 V		-2 V	e3	BREAK-BEFORE-MAKE	30	260	150 ns	160 ohm	120 ns	2 ohm	4.89 mm
MAX4526CWA	Analog Devices	SPDT	COMMERCIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1			GULL WING		-15 V	15 V		SMALL OUTLINE			1.27 mm	70 Cel	0 Cel	TIN LEAD	DUAL	R-PDSO-G8		1		1.75 mm		3.9 mm	Not Qualified						e0					175 ohm		8 ohm	4.9 mm
MAX4783ETE+	Analog Devices	SPDT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		3	1	CMOS		NO LEAD			1.8 V	1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16	SEPARATE OUTPUT	1	3.6 V	.8 mm		3 mm	Not Qualified			1.6 V			e3	BREAK-BEFORE-MAKE	30	260	30 ns	2.5 ohm	20 ns	.3 ohm	3 mm
MAX4053EPE+	Analog Devices	SPDT	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		3	1	CMOS		THROUGH-HOLE	-8 V	-5 V	5 V	3/5/+-5	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T16	SEPARATE OUTPUT	1	8 V	4.572 mm		7.62 mm	Not Qualified		90 dB	2.7 V	IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY	-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	175 ns	100 ohm	150 ns	12 ohm	19.175 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.