QCCJ Multiplexers & Switches 277

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
DG406DN-E3	Vishay Intertechnology	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS	J BEND	-20 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn)	QUAD	S-PQCC-J28		1	20 V	4.57 mm	.02 A	11.5062 mm	Not Qualified		69 dB	5 V			-5 V	e3	BREAK-BEFORE-MAKE	30	260	400 ns	100 ohm	300 ns	5 ohm	11.5062 mm
ADG406BPZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BICMOS	J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE		260	150 ns	80 ohm	150 ns	4 ohm	11.505 mm
ADG507AKPZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS	J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.51 mm	.02 A	11.506 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e3	BREAK-BEFORE-MAKE		260	300 ns	450 ohm	300 ns	22.5 ohm	11.5062 mm
ADG406BPZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BICMOS	J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE	40	260	150 ns	80 ohm	150 ns	4 ohm	11.505 mm
CD22M3494MQZ96	Renesas Electronics	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BIMOS	J BEND			5 V	4/15	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J44	SEPARATE OUTPUT	3	15 V	4.57 mm		16.585 mm	Not Qualified		95 dB	4 V	16 X 8 ARRAY			e3		30	245	100 ns	75 ohm	100 ns	6 ohm	16.585 mm
CD22M3494MQZ	Renesas Electronics	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BIMOS	J BEND			5 V	4/15	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J44	SEPARATE OUTPUT	3	15 V	4.57 mm		16.585 mm	Not Qualified		95 dB	4 V	16 X 8 ARRAY			e3		30	245	100 ns	75 ohm	100 ns	6 ohm	16.585 mm
DG406DN-T1-E3	Vishay Intertechnology	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS	J BEND	-20 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		1	20 V	4.57 mm	.03 A	11.5062 mm	Not Qualified		69 dB	5 V			-5 V	e3	BREAK-BEFORE-MAKE	30	260	400 ns	100 ohm	300 ns	5 ohm	11.5062 mm
ADG506AKP	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	16	CMOS	J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J28		1	16.5 V	4.51 mm	.02 A	11.506 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e0	BREAK-BEFORE-MAKE	30	225	300 ns	450 ohm	300 ns	22.5 ohm	11.5062 mm
ADG508AKPZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS	J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20		1	16.5 V	4.57 mm	.02 A	8.965 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY		-10.8 V	e3	BREAK-BEFORE-MAKE		260	300 ns	450 ohm	300 ns	22.5 ohm	8.965 mm
ADG506AKPZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS	J BEND	-16.5 V	-15 V	15 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.51 mm		11.506 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e3		40	260	300 ns	450 ohm	300 ns	22.5 ohm	11.5062 mm
AD75019JPZ-REEL	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BICMOS	J BEND		-12 V	12 V	5,+-12	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQCC-J44		3		4.57 mm		16.5862 mm	Not Qualified		92 dB					e3		30	260		300 ohm		20 ohm	16.5862 mm
HV2201PJ-G	Microchip Technology	SPST		28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	4 mA	1	8	HVCMOS	J BEND	-160 V		5 V	3.3/5,+-40/+-160	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQCC-J28	SEPARATE OUTPUT		5.5 V	4.573 mm	3 A	11.43 mm	Not Qualified	NO	33 dB	3 V		-30 V	-40 V	e3				5000 ns	38 ohm	5000 ns	1.9 ohm	11.43 mm	190 V
DG884DN-E3	Vishay Intertechnology	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	NMOS	J BEND	-5.5 V	-3 V	15 V	5,15,-3	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J44		1	20 V	4.57 mm		16.5862 mm	Not Qualified			10 V	8 X 4 ARRAY		0 V	e3	BREAK-BEFORE-MAKE			300 ns	90 ohm	175 ns	3 ohm	16.5862 mm
DG884DN	Vishay Intertechnology	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	NMOS	J BEND	-5.5 V	-3 V	15 V	5,15,-3	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J44			20 V	4.57 mm		16.5862 mm	Not Qualified			10 V	8 X 4 ARRAY		0 V	e0	BREAK-BEFORE-MAKE			300 ns	90 ohm	175 ns	3 ohm	16.5862 mm
MAX4800ACQI+	Maxim Integrated	SPST	COMMERCIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	1	BCDMOS	J BEND			5 V	3/5	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQCC-J28	SEPARATE OUTPUT	1	6 V	4.57 mm		11.505 mm	Not Qualified	NO	33 dB	2.7 V				e3			245	5000 ns	38 ohm	5000 ns	1.9 ohm	11.505 mm
MAX4800ACQI	Analog Devices	SPST	COMMERCIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	1	BCDMOS	J BEND			5 V	3/5	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQCC-J28	SEPARATE OUTPUT	1	6 V	4.57 mm		11.505 mm	Not Qualified	NO	33 dB	2.7 V				e3			245	5000 ns	38 ohm	5000 ns	1.9 ohm	11.505 mm
MT8808APR1	Microchip Technology	CROSS POINT SWITCH	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS	J BEND			5 V	5/12,GND/-7	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28	SEPARATE OUTPUT		13.2 V	4.57 mm		11.505 mm	Not Qualified		95 dB	4.5 V				e3				100 ns	185 ohm		5 ohm	11.505 mm
MT8816AP1	Microchip Technology	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS	J BEND		-7 V	5 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J44			13.2 V	4.57 mm		16.585 mm	Not Qualified		95 dB	4.5 V	8 X 16 ARRAY			e3					185 ohm		5 ohm	16.585 mm
AD75019JPZ	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BICMOS	J BEND		-12 V	12 V	5,+-12	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQCC-J44		3		4.57 mm		16.5862 mm	Not Qualified		92 dB					e3		30	260		300 ohm		20 ohm	16.5862 mm
HV2201PJ-G-M904	Microchip Technology	SPST	COMMERCIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	3 mA	8	8	CMOS	J BEND			5 V		CHIP CARRIER	LDCC28,.5SQ		1.27 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQCC-J28	SEPARATE OUTPUT		5.5 V	4.573 mm	3 A	11.43 mm		NO	33 dB	3 V	IT ALSO REQUIRES VPP (40V TO VNN +200V) AND VNN (-40V TO -160V) SUPPLY	-30 V		e3				5000 ns	38 ohm	5000 ns	1.9 ohm	11.43 mm	30 V
MT8816AP	Microsemi	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS	J BEND		-7 V	5 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J44			13.2 V	4.57 mm		16.585 mm	Not Qualified		95 dB	4.5 V	8 X 16 ARRAY			e0					185 ohm		5 ohm	16.585 mm
MT8816APR1	Microchip Technology	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS	J BEND		-7 V	5 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J44			13.2 V	4.57 mm		16.585 mm	Not Qualified		95 dB	4.5 V	8 X 16 ARRAY			e3					185 ohm		5 ohm	16.585 mm
ADG506AKPZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS	J BEND	-16.5 V	-15 V	15 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.51 mm		11.5062 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e3			260	300 ns	450 ohm	300 ns	22.5 ohm	11.506 mm
MT8808AP1	Microchip Technology	CROSS POINT SWITCH	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS	J BEND			5 V	5/12,GND/-7	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28	SEPARATE OUTPUT		13.2 V	4.57 mm		11.505 mm	Not Qualified		95 dB	4.5 V				e3				100 ns	185 ohm		5 ohm	11.505 mm
ADG506AKP-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS	J BEND	-16.5 V	-15 V	15 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel		QUAD	S-PQCC-J28			16.5 V	4.51 mm		11.506 mm			68 dB	10.8 V			-10.8 V						450 ohm		5 ohm	11.506 mm
CD22M3494MQA	Intersil	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BIMOS	J BEND			5 V	4/15	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J44	SEPARATE OUTPUT	1	15 V	4.57 mm		16.585 mm	Not Qualified		95 dB	4 V	16 X 8 ARRAY			e0				100 ns	75 ohm	100 ns	6 ohm	16.585 mm
CD22M3494MQAZ96	Renesas Electronics	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BIMOS	J BEND			5 V	4/15	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J44	SEPARATE OUTPUT	3	15 V	4.57 mm		16.585 mm	Not Qualified		95 dB	4 V	16 X 8 ARRAY			e3		30	245	100 ns	75 ohm	100 ns	6 ohm	16.585 mm
ADG526AKPZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	16	CMOS	J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY		-10.8 V	e3	BREAK-BEFORE-MAKE		260	300 ns	450 ohm	300 ns	5 ohm	11.505 mm
ADG526AKPZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	16	CMOS	J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e3	BREAK-BEFORE-MAKE		260	300 ns	450 ohm	300 ns	5 ohm	11.505 mm
DG407DN-T1-E3	Vishay Intertechnology	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS	J BEND	-20 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		1	20 V	4.57 mm	.03 A	11.5062 mm	Not Qualified		69 dB	5 V			-5 V	e3	BREAK-BEFORE-MAKE	30	260	400 ns	100 ohm	300 ns	5 ohm	11.5062 mm
ADG529AKP	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	4	CMOS	J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20		1	16.5 V	4.57 mm	.02 A	8.965 mm	Not Qualified		68 dB	10.8 V			-10.8 V	e0	BREAK-BEFORE-MAKE		225	300 ns	450 ohm	300 ns	5 ohm	8.965 mm
MAX4456CQH+D	Maxim Integrated	CROSS POINT SWITCH	COMMERCIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS	J BEND	-5.5 V	-5 V	5 V	+-5	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQCC-J44	SEPARATE OUTPUT	3	5.5 V	4.57 mm		16.5862 mm	Not Qualified		80 dB	4.5 V	VIDEO APPLICATION		-4.5 V	e3				50 ns		35 ns		16.5862 mm
MAX4456CQH-D	Maxim Integrated	CROSS POINT SWITCH	COMMERCIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS	J BEND	-5.5 V	-5 V	5 V	+-5	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J44	SEPARATE OUTPUT	1	5.5 V	4.57 mm		16.5862 mm	Not Qualified		80 dB	4.5 V	VIDEO APPLICATION		-4.5 V	e0				50 ns		35 ns		16.5862 mm
HI4P548-5	Renesas Electronics		COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	2 mA	1	8	CMOS	J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel		QUAD	S-PQCC-J20					.02 A		Not Qualified								BREAK-BEFORE-MAKE				2000 ohm
ADG201HSJPZ	Analog Devices	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS	J BEND	-16.5 V	-15 V	15 V		CHIP CARRIER	LDCC20,.4SQ		1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1	16.5 V	4.57 mm		8.965 mm	Not Qualified	NC	72 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE		-13.5 V	e3	BREAK-BEFORE-MAKE		260	75 ns	75 ohm	75 ns	1.5 ohm	8.965 mm
ADG407BPZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.5 mA	1	8	BICMOS	J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY		-13.5 V	e3	BREAK-BEFORE-MAKE		260	150 ns	80 ohm	150 ns	4 ohm	11.505 mm
ADG527AKPZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS	J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY		-10.8 V	e3	BREAK-BEFORE-MAKE			300 ns	450 ohm	300 ns	5 ohm	11.505 mm
DG406BDN-E3	Vishay Intertechnology	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS	J BEND	-20 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		1	20 V	4.57 mm	.03 A	11.5062 mm	Not Qualified		86 dB	5 V			-5 V	e3	BREAK-BEFORE-MAKE	30	260	123 ns	60 ohm	94 ns	3 ohm	11.5062 mm
AD9300KP-REEL	Analog Devices	VIDEO MULTIPLEXER	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	16 mA	1	4	BIPOLAR	J BEND	-15 V	-12 V	12 V	+-12	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J20			15 V	4.57 mm		8.965 mm	Not Qualified			10 V			-10 V	e0				45 ns		45 ns		8.965 mm
PMADG201AKP	Analog Devices		COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4		CMOS	J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT						Not Qualified	NC						e0	BREAK-BEFORE-MAKE			300 ns	145 ohm
PMADG508AKP	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS	J BEND				12/15,GND/-12/-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J20					.02 A		Not Qualified							e0	BREAK-BEFORE-MAKE			450 ns	1000 ohm
PMADG526AKP	Analog Devices		INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	16	CMOS	J BEND				12/15,GND/-12/-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J28					.02 A		Not Qualified							e0	BREAK-BEFORE-MAKE			450 ns	1000 ohm
AD9300KP	Analog Devices	VIDEO MULTIPLEXER	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	16 mA	1	4	BIPOLAR	J BEND	-15 V	-12 V	12 V	+-12	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Tin/Lead (Sn85Pb15)	QUAD	S-PQCC-J20			15 V	4.57 mm		8.965 mm	Not Qualified			10 V			-10 V	e0				45 ns		45 ns		8.965 mm
PMADG201HSKP	Analog Devices		INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4		CMOS	J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT						Not Qualified	NC						e0	BREAK-BEFORE-MAKE			50 ns	120 ohm
PMADG528AKP	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS	J BEND				12/+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J20					.02 A		Not Qualified							e0	BREAK-BEFORE-MAKE			450 ns	1000 ohm
PMADG509AKP	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	4	CMOS	J BEND				12/15,GND/-12/-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J20					.02 A		Not Qualified							e0	BREAK-BEFORE-MAKE			450 ns	1000 ohm
PMADG201HSJP	Analog Devices		INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4		CMOS	J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT						Not Qualified	NC						e0	BREAK-BEFORE-MAKE			75 ns	120 ohm
PMADG507AKP	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS	J BEND				12/15,GND/-12/-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J28					.02 A		Not Qualified							e0	BREAK-BEFORE-MAKE			450 ns	1000 ohm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.