QCCJ Multiplexers & Switches 277

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length
AD7512DIKP-REEL	Analog Devices	SPDT	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS	J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1		4.57 mm		8.966 mm	Not Qualified				OVERVOLTAGE PROTECTION		e0			225		100 ohm		.75 ohm	8.966 mm
ADG528AKP-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS	J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20		1	16.5 V	4.57 mm	.02 A	8.965 mm	Not Qualified		68 dB	10.8 V		-10.8 V	e0	BREAK-BEFORE-MAKE		225	300 ns	450 ohm	300 ns	5 ohm	8.965 mm
AD7511DIJP	Analog Devices	SPST	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.8 mA	4	1	CMOS	J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT			4.57 mm		8.9662 mm	Not Qualified	NC			OVERVOLTAGE PROTECTION		e0	BREAK-BEFORE-MAKE				100 ohm		1 ohm	8.9662 mm
ADG201HSKP-REEL	Analog Devices	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS	J BEND	-16.5 V	-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1	16.5 V	4.57 mm		8.965 mm	Not Qualified	NC	72 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE	-13.5 V	e0	BREAK-BEFORE-MAKE		225	50 ns	50 ohm	50 ns	3 ohm	8.965 mm
AD7591DIKP	Analog Devices	SPST	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	4	1	CMOS	J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J20	SEPARATE OUTPUT			4.57 mm		8.965 mm	Not Qualified	NC	85 dB		OVERVOLTAGE PROTECTION		e0	BREAK-BEFORE-MAKE			400 ns	90 ohm	250 ns	2 ohm	8.965 mm
ADG507AKP	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS	J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J28		1	16.5 V	4.51 mm	.02 A	11.506 mm	Not Qualified		68 dB	10.8 V		-10.8 V	e0	BREAK-BEFORE-MAKE		225	300 ns	450 ohm	300 ns	22.5 ohm	11.5062 mm
AD7506JP	Analog Devices		COMMERCIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1 mA	1	16	CMOS	J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J28					.02 A		Not Qualified						e0	BREAK-BEFORE-MAKE				550 ohm
ADG201HSJP	Analog Devices	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS	J BEND	-16.5 V	-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1	16.5 V	4.57 mm		8.965 mm	Not Qualified	NC	72 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE	-13.5 V	e0	BREAK-BEFORE-MAKE		225	75 ns	75 ohm	75 ns	1.5 ohm	8.965 mm
ADG428BP	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.1 mA	1	8	CMOS	J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20		1		4.57 mm	.03 A	8.965 mm	Not Qualified		75 dB				e0	BREAK-BEFORE-MAKE		225	225 ns	100 ohm	300 ns	10 ohm	8.965 mm
ADG222KPZ	Analog Devices	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS	J BEND		-15 V	15 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20		1		4.57 mm		8.966 mm	Not Qualified		80 dB				e3				300 ns	90 ohm	250 ns	5 ohm	8.966 mm
ADG201AKPZ-REEL	Analog Devices	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS	J BEND		-15 V	15 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20		1		4.57 mm		8.966 mm	Not Qualified		80 dB				e3			260	300 ns	90 ohm	250 ns	5 ohm	8.966 mm
MAX4800CQI+T	Analog Devices	SPST	COMMERCIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	1	BCDMOS	J BEND			3 V	3/13	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J28		1	13.2 V	4.57 mm		11.505 mm	Not Qualified	NO	77 dB	2.7 V			e3			245	5000 ns	38 ohm	5000 ns	1.3 ohm	11.505 mm
MAX456CQH-T	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1		CMOS	J BEND		-5 V	5 V	+-5	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J44	SEPARATE OUTPUT						Not Qualified						e0					600 ohm
MAX307EQI+	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS	J BEND	-20 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J28		1	20 V	4.57 mm	.03 A	11.505 mm	Not Qualified		69 dB	4.5 V	CONFIGURABLE AS 16-CHANNEL SINGLE ENDED MUX	-4.5 V	e3	BREAK-BEFORE-MAKE		245	200 ns	100 ohm	150 ns	1.5 ohm	11.505 mm
DG406DN+	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS	J BEND	-20 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J28		1	20 V	4.57 mm	.02 A	11.505 mm	Not Qualified		69 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	245	400 ns	100 ohm	300 ns	1.5 ohm	11.505 mm
MAX4801CQI+T	Analog Devices	SPST	COMMERCIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	1	BCDMOS	J BEND			3 V	3/13	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J28			13.2 V	4.57 mm		11.505 mm	Not Qualified	NO	77 dB	2.7 V			e3				5000 ns	38 ohm	5000 ns	7.6 ohm	11.505 mm
MAX307EQI+T	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS	J BEND	-20 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J28		1	20 V	4.57 mm	.03 A	11.505 mm	Not Qualified		69 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	245	200 ns	100 ohm	150 ns	1.5 ohm	11.505 mm
MAX306EQI+	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS	J BEND	-20 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J28		1	20 V	4.57 mm	.03 A	11.505 mm	Not Qualified		69 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE		245	200 ns	100 ohm	150 ns	1.5 ohm	11.505 mm
MAX4801CQI+	Analog Devices	SPST	COMMERCIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	1	BCDMOS	J BEND			3 V	3/13	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J28		1	13.2 V	4.57 mm		11.505 mm	Not Qualified	NO	77 dB	2.7 V			e3				5000 ns	38 ohm	5000 ns	7.6 ohm	11.505 mm
MAX4802ACQI	Analog Devices	SPST	COMMERCIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	1	BCDMOS	J BEND			5 V	3/5	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQCC-J28	SEPARATE OUTPUT	1	6 V	4.57 mm		11.505 mm	Not Qualified	NO	33 dB	2.7 V			e3			245	5000 ns	38 ohm	5000 ns	1.9 ohm	11.505 mm
MAX4800CQI+	Analog Devices	SPST	COMMERCIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	1	BCDMOS	J BEND			3 V	3/13	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J28		1	13.2 V	4.57 mm		11.505 mm	Not Qualified	NO	77 dB	2.7 V			e3			245	5000 ns	38 ohm	5000 ns	1.3 ohm	11.505 mm
M093C	STMicroelectronics	CROSS POINT SWITCH	COMMERCIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1		CMOS	J BEND			14 V	14	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J44	SEPARATE OUTPUT						Not Qualified						e0				400 ns	60 ohm
M34930C1	STMicroelectronics	CROSS POINT SWITCH	COMMERCIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1		CMOS	J BEND			10 V	10	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J44	SEPARATE OUTPUT						Not Qualified						e0					100 ohm
M3493C1	STMicroelectronics	CROSS POINT SWITCH	COMMERCIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1		CMOS	J BEND			10 V	10	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J44	SEPARATE OUTPUT						Not Qualified						e0					100 ohm
M74HC4052C1R	STMicroelectronics	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.08 mA	1	4	CMOS	J BEND		-6 V	6 V	2/6,GND/-6	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20				4.57 mm	.025 A	8.9662 mm	Not Qualified		50 dB				e0	BREAK-BEFORE-MAKE			38 ns	100 ohm	43 ns	5 ohm	8.9662 mm
HCF4053BC1	STMicroelectronics	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.6 mA	3	2	CMOS	J BEND		0 V	15 V	5/15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20				4.57 mm	.01 A	8.9662 mm	Not Qualified		40 dB				e3	BREAK-BEFORE-MAKE			240 ns	280 ohm	160 ns	5 ohm	8.9662 mm
HCF4052BC1	STMicroelectronics	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.6 mA	1	4	CMOS	J BEND		0 V	15 V	5/15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20				4.57 mm	.01 A	8.9662 mm	Not Qualified		40 dB				e3	BREAK-BEFORE-MAKE			240 ns	280 ohm	160 ns	5 ohm	8.9662 mm
M74HC4352C1R	STMicroelectronics	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.08 mA	1	4	CMOS	J BEND		-6 V	6 V	2/6,GND/-6	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20				4.57 mm	.025 A	8.9662 mm	Not Qualified		50 dB				e3	BREAK-BEFORE-MAKE			34 ns	100 ohm	47 ns	5 ohm	8.9662 mm
M74HC4016C1R	STMicroelectronics	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.08 mA	4	1	CMOS	J BEND			12 V	2/12	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20	SEPARATE OUTPUT			4.57 mm		8.9662 mm	Not Qualified	NO	50 dB				e3	BREAK-BEFORE-MAKE			14 ns	120 ohm	24 ns	6 ohm	8.9662 mm
M74HC4353C1R	STMicroelectronics	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.08 mA	3	2	CMOS	J BEND		-6 V	6 V	2/6,GND/-6	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20				4.57 mm	.025 A	8.9662 mm	Not Qualified		50 dB				e3	BREAK-BEFORE-MAKE			34 ns	100 ohm	49 ns	5 ohm	8.9662 mm
M74HC4053C1R	STMicroelectronics	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.08 mA	3	2	CMOS	J BEND		-6 V	6 V	2/6,GND/-6	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20				4.57 mm	.025 A	8.9662 mm	Not Qualified		50 dB				e0	BREAK-BEFORE-MAKE			38 ns	100 ohm	38 ns	5 ohm	8.9662 mm
HCF4097BC1	STMicroelectronics	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.6 mA	1	8	CMOS	J BEND		0 V	15 V	5/15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20			15 V	4.57 mm	.025 A	8.965 mm	Not Qualified		40 dB	3 V			e3				190 ns	240 ohm	130 ns	5 ohm	8.965 mm
HCF4051BC1	STMicroelectronics	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.6 mA	1	8	CMOS	J BEND		0 V	15 V	5/15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20				4.57 mm	.01 A	8.9662 mm	Not Qualified		40 dB				e3	BREAK-BEFORE-MAKE			240 ns	280 ohm	160 ns	5 ohm	8.9662 mm
HCF4016BC1	STMicroelectronics	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.03 mA	4	1	CMOS	J BEND		0 V	15 V	5/15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20	SEPARATE OUTPUT			4.57 mm		8.9662 mm	Not Qualified	NO	50 dB				e3				30 ns	400 ohm		10 ohm	8.9662 mm
M74HC4051C1R	STMicroelectronics	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.08 mA	1	8	CMOS	J BEND		-6 V	6 V	2/6,GND/-6	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20				4.57 mm	.025 A	8.9662 mm	Not Qualified		50 dB				e0	BREAK-BEFORE-MAKE			38 ns	100 ohm	43 ns	5 ohm	8.9662 mm
HCF4066BC1	STMicroelectronics	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.03 mA	4	1	CMOS	J BEND		0 V	15 V	3/15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20	SEPARATE OUTPUT			4.57 mm		8.9662 mm	Not Qualified	NO	50 dB				e3				30 ns	240 ohm		5 ohm	8.9662 mm
HCF4067BC1	STMicroelectronics	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.6 mA	1	16	CMOS	J BEND		0 V	15 V	5/15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20			15 V	4.57 mm	.025 A	8.965 mm	Not Qualified		40 dB	3 V			e3				190 ns	240 ohm	130 ns	5 ohm	8.965 mm
M74HC4066C1R	STMicroelectronics	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.08 mA	4	1	CMOS	J BEND			12 V	2/12	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20	SEPARATE OUTPUT			4.57 mm		8.9662 mm	Not Qualified	NO	60 dB				e3	MAKE-BEFORE-BREAK			12 ns	80 ohm	18 ns	5 ohm	8.9662 mm
M74HC4066C1	STMicroelectronics	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS	J BEND			2 V	2/6	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT		6 V	4.57 mm		8.9662 mm	Not Qualified	NO		2 V			e0	MAKE-BEFORE-BREAK			115 ns	200 ohm	115 ns	50 ohm	8.9662 mm
M74HC4351C1R	STMicroelectronics	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.08 mA	1	8	CMOS	J BEND		-6 V	6 V	2/6,GND/-6	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20				4.57 mm	.025 A	8.9662 mm	Not Qualified		50 dB				e3	BREAK-BEFORE-MAKE			34 ns	100 ohm	47 ns	5 ohm	8.9662 mm
M74HC4316C1R	STMicroelectronics	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS	J BEND		-6 V	6 V	2/6,GND/-6	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20	SEPARATE OUTPUT			4.57 mm		8.9662 mm	Not Qualified	NO	50 dB				e3	BREAK-BEFORE-MAKE			18 ns	70 ohm	29 ns	5 ohm	8.9662 mm
DG528DN+T	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS	J BEND	-20 V	-15 V	15 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	R-PQCC-J20		1	20 V	4.57 mm		8.966 mm	Not Qualified		68 dB	4.5 V		-4.5 V	e3			250	1500 ns	450 ohm	1500 ns	27 ohm	8.9662 mm
DG425DN-T	Maxim Integrated	DPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		2	2	CMOS	J BEND	-20 V	-15 V	15 V	5,+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1	20 V	4.57 mm		8.965 mm	Not Qualified	NC	72 dB	4.5 V		-4.5 V	e0	BREAK-BEFORE-MAKE			250 ns	45 ohm	200 ns	3 ohm	8.965 mm
DG421DN-T	Maxim Integrated	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS	J BEND	-20 V	-15 V	15 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel		QUAD	S-PQCC-J20		1	20 V	4.57 mm		8.965 mm	Not Qualified		72 dB	4.5 V		-4.5 V					250 ns	45 ohm	200 ns	3 ohm	8.965 mm
DG529DN-T	Maxim Integrated	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	QCCJ	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	CMOS	J BEND	-20 V	-15 V	15 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	R-PQCC-J20			20 V	4.57 mm		8.966 mm	Not Qualified		68 dB	4.5 V		-4.5 V	e0				1500 ns	450 ohm	1500 ns	27 ohm	8.9662 mm
DG528DN-T	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS	J BEND	-20 V	-15 V	15 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	R-PQCC-J20		1	20 V	4.57 mm		8.966 mm	Not Qualified		68 dB	4.5 V		-4.5 V	e0				1500 ns	450 ohm	1500 ns	27 ohm	8.9662 mm
DG528DN+	Maxim Integrated	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	RECTANGULAR	YES	PLASTIC/EPOXY		1	8	CMOS	J BEND	-20 V	-15 V	15 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	R-PQCC-J20		1	20 V	4.57 mm		8.966 mm	Not Qualified		68 dB	4.5 V		-4.5 V	e3		30	250	1500 ns	450 ohm	1500 ns	27 ohm	8.9662 mm
DG423DN	Maxim Integrated	SPDT	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS	J BEND	-20 V	-15 V	15 V	5,+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1	20 V	4.57 mm		8.965 mm	Not Qualified	NO/NC	72 dB	4.5 V		-4.5 V	e0	BREAK-BEFORE-MAKE			250 ns	45 ohm	200 ns	3 ohm	8.965 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.