QCCJ Multiplexers & Switches 277

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length
ADG429BP-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.1 mA	1	4	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20				4.57 mm	.03 A	8.965 mm	Not Qualified		75 dB				e0	BREAK-BEFORE-MAKE			225 ns	100 ohm	300 ns	10 ohm	8.965 mm
ADG508FBP	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.2 mA	1	8	CMOS		J BEND				12/15,GND/-12/-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J20					.02 A		Not Qualified						e0	BREAK-BEFORE-MAKE			300 ns	400 ohm
AD7510DIKP-REEL	Analog Devices	SPST	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1		4.57 mm		8.966 mm	Not Qualified	NO			OVERVOLTAGE PROTECTION		e0			225		100 ohm		.75 ohm	8.966 mm
AD7512DIJPZ	Analog Devices	SPDT	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.8 mA	2	1	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1		4.57 mm		8.9662 mm	Not Qualified				OVERVOLTAGE PROTECTION		e3			260		100 ohm		1 ohm	8.9662 mm
ADG407BPZ-RL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.5 mA	1	8	BICMOS		J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		3	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY	-13.5 V	e3	BREAK-BEFORE-MAKE		260	150 ns	80 ohm	150 ns	4 ohm	11.505 mm
AD7511DIKP-REEL	Analog Devices	SPST	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT			4.57 mm		8.966 mm	Not Qualified	NC			OVERVOLTAGE PROTECTION		e0	BREAK-BEFORE-MAKE				100 ohm		.75 ohm	8.966 mm
ADG528AKP	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20		1	16.5 V	4.57 mm	.02 A	8.965 mm	Not Qualified		68 dB	10.8 V		-10.8 V	e0	BREAK-BEFORE-MAKE		225	300 ns	450 ohm	300 ns	5 ohm	8.965 mm
ADG508AKP	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20		1	16.5 V	4.57 mm	.02 A	8.965 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY	-10.8 V	e0	BREAK-BEFORE-MAKE		225	300 ns	450 ohm	300 ns	22.5 ohm	8.965 mm
ADG201AKPZ	Analog Devices	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		J BEND		-15 V	15 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20		1		4.57 mm		8.966 mm	Not Qualified		80 dB				e3			260	300 ns	90 ohm	250 ns	5 ohm	8.966 mm
ADG527AKP	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J28		1	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY	-10.8 V	e0	BREAK-BEFORE-MAKE			300 ns	450 ohm	300 ns	5 ohm	11.505 mm
ADG212AKP-REEL	Analog Devices	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS		J BEND		-15 V	15 V	5,+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1		4.57 mm		8.965 mm	Not Qualified	NO	80 dB				e0	BREAK-BEFORE-MAKE		225	600 ns	115 ohm	450 ns		8.965 mm
ADG221KPZ	Analog Devices	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1		4.57 mm		8.966 mm	Not Qualified	NC	80 dB				e3	BREAK-BEFORE-MAKE		260	300 ns	90 ohm	250 ns	5 ohm	8.966 mm
ADG407BPZ-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	BICMOS		J BEND	-16.5 V	-15 V	15 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28		1	16.5 V	4.57 mm		11.505 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY	-13.5 V	e3				150 ns	80 ohm	150 ns	4 ohm	11.505 mm
ADG529AKPZ	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	4	CMOS		J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20		1	16.5 V	4.57 mm	.02 A	8.965 mm	Not Qualified		68 dB	10.8 V		-10.8 V	e3	BREAK-BEFORE-MAKE		260	300 ns	450 ohm	300 ns	5 ohm	8.965 mm
ADG201HSJP-REEL	Analog Devices	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS		J BEND	-16.5 V	-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1	16.5 V	4.57 mm		8.965 mm	Not Qualified	NC	72 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE	-13.5 V	e0	BREAK-BEFORE-MAKE		225	75 ns	50 ohm	75 ns	3 ohm	8.965 mm
AD7501KP	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.8 mA	1	8	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J20				4.57 mm	.02 A	8.9662 mm	Not Qualified						e0					300 ohm		6.8 ohm	8.9662 mm
ADG509AKP	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	4	CMOS		J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20		1	16.5 V	4.57 mm	.02 A	8.965 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY	-10.8 V	e0	BREAK-BEFORE-MAKE		225	300 ns	450 ohm	300 ns	22.5 ohm	8.965 mm
ADG508AKP-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	8	CMOS		J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20			16.5 V	4.57 mm	.02 A	8.965 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY	-10.8 V	e0	BREAK-BEFORE-MAKE			300 ns	450 ohm	300 ns	22.5 ohm	8.965 mm
AD7592DIKP	Analog Devices	SPDT	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	2	1	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1		4.57 mm		8.965 mm	Not Qualified		85 dB		OVERVOLTAGE PROTECTION		e0	BREAK-BEFORE-MAKE		225	350 ns	90 ohm	350 ns	2 ohm	8.965 mm
ADG201HSKPZ	Analog Devices	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS		J BEND	-16.5 V	-15 V	15 V		CHIP CARRIER	LDCC20,.4SQ		1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1	16.5 V	4.57 mm		8.965 mm	Not Qualified	NC	72 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE	-13.5 V	e3	BREAK-BEFORE-MAKE		260	50 ns	75 ohm	50 ns	1.5 ohm	8.965 mm
ADG528AKPZ-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS		J BEND	-16.5 V	-15 V	15 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20		1	16.5 V	4.57 mm		8.965 mm	Not Qualified		68 dB	10.8 V		-10.8 V	e3			260	300 ns	450 ohm	300 ns	5 ohm	8.965 mm
AD7590DIKP-REEL	Analog Devices	SPST	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	4	1	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1		4.57 mm		8.965 mm	Not Qualified	NO	85 dB		OVERVOLTAGE PROTECTION		e0	BREAK-BEFORE-MAKE		225	250 ns	90 ohm	400 ns	2 ohm	8.965 mm
AD7590DIKP	Analog Devices	SPST	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	4	1	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1		4.57 mm		8.965 mm	Not Qualified	NO	85 dB		OVERVOLTAGE PROTECTION		e0	BREAK-BEFORE-MAKE		225	250 ns	90 ohm	400 ns	2 ohm	8.965 mm
ADG509AKPZ1	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	4	CMOS		J BEND				12/15,GND/-12/-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel		QUAD	S-PQCC-J20					.02 A		Not Qualified							BREAK-BEFORE-MAKE			450 ns	1000 ohm
ADG428BP-REEL	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.1 mA	1	8	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20		1		4.57 mm	.03 A	8.965 mm	Not Qualified		75 dB				e0	BREAK-BEFORE-MAKE		225	225 ns	100 ohm	300 ns	10 ohm	8.965 mm
AD7502JP	Analog Devices	DIFFERENTIAL MULTIPLEXER	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.8 mA	1	4	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J20				4.57 mm	.02 A	8.9662 mm	Not Qualified						e0					300 ohm		6.8 ohm	8.9662 mm
ADG528FBPZ	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS		J BEND	-16.5 V	-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J20		1	16.5 V	4.57 mm	.02 A	8.965 mm	Not Qualified		68 dB	13.5 V	ACTIVE OVERVOLTAGE PROTECTION	-13.5 V	e3	BREAK-BEFORE-MAKE	40	260	400 ns	400 ohm	400 ns	15 ohm	8.965 mm
AD7512DIKPZ	Analog Devices	SPDT	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		2	1	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1		4.57 mm		8.966 mm	Not Qualified				OVERVOLTAGE PROTECTION		e3			260		100 ohm		.75 ohm	8.966 mm
ADG201HSKP	Analog Devices	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS		J BEND	-16.5 V	-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1	16.5 V	4.57 mm		8.965 mm	Not Qualified	NC	72 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE	-13.5 V	e0	BREAK-BEFORE-MAKE		225	50 ns	75 ohm	50 ns	1.5 ohm	8.965 mm
ADG509AKP-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	4	CMOS		J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20		1	16.5 V	4.57 mm	.02 A	8.965 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY	-10.8 V	e0	BREAK-BEFORE-MAKE		225	300 ns	450 ohm	300 ns	22.5 ohm	8.965 mm
ADG528FBP	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.2 mA	1	8	CMOS		J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20		1	16.5 V	4.57 mm	.02 A	8.965 mm	Not Qualified		68 dB	13.5 V	ACTIVE OVERVOLTAGE PROTECTION	-13.5 V	e0	BREAK-BEFORE-MAKE		225	400 ns	400 ohm	400 ns	15 ohm	8.965 mm
AD7512DIJP	Analog Devices	SPDT	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.8 mA	2	1	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1		4.57 mm		8.9662 mm	Not Qualified				OVERVOLTAGE PROTECTION		e0			225		100 ohm		1 ohm	8.9662 mm
ADG407BP-REEL	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	BICMOS		J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J28		1	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE		225	150 ns	80 ohm	150 ns	4 ohm	11.505 mm
AD7506KP	Analog Devices		COMMERCIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1 mA	1	16	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J28					.02 A		Not Qualified						e0	BREAK-BEFORE-MAKE			1500 ns	550 ohm
AD7511DIKP/883B	Analog Devices	SPST	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS	MIL-STD-883 Class B	J BEND		-15 V	15 V		CHIP CARRIER	LDCC20,.4SQ		1.27 mm	70 Cel	0 Cel		QUAD	S-PQCC-J20				4.57 mm		8.966 mm		NO			OVERVOLTAGE PROTECTION			BREAK-BEFORE-MAKE			350 ns	175 ohm	180 ns	.75 ohm	8.966 mm
DG407DN+	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS		J BEND	-20 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J28		1	20 V	4.57 mm	.02 A	11.505 mm	Not Qualified		69 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	245	400 ns	100 ohm	300 ns	1.5 ohm	11.505 mm
MAX306EQI+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS		J BEND	-20 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J28		1	20 V	4.57 mm	.03 A	11.505 mm	Not Qualified		69 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE		245	200 ns	100 ohm	150 ns	1.5 ohm	11.505 mm
DG407DN+T	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		2	8	CMOS		J BEND	-20 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J28		1	20 V	4.57 mm	.02 A	11.505 mm	Not Qualified		69 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	245	200 ns	100 ohm	150 ns	1.5 ohm	11.505 mm
DG406DN+T	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS		J BEND	-20 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J28		1	20 V	4.57 mm	.02 A	11.505 mm	Not Qualified		69 dB	4.5 V		-4.5 V	e3	BREAK-BEFORE-MAKE	30	245	200 ns	100 ohm	150 ns	1.5 ohm	11.505 mm
AD7503KP	Analog Devices	SINGLE-ENDED MULTIPLEXER	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.8 mA	1	8	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J20				4.57 mm	.02 A	8.9662 mm	Not Qualified						e0					300 ohm		6.8 ohm	8.9662 mm
ADG526AKP	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	1	16	CMOS		J BEND	-16.5 V	-15 V	15 V	12/15,GND/-12/-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J28		1	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		68 dB	10.8 V	ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY	-10.8 V	e0	BREAK-BEFORE-MAKE		225	300 ns	450 ohm	300 ns	5 ohm	11.505 mm
AD75019JP	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BICMOS		J BEND		-12 V	12 V	5,+-12	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J44		3		4.57 mm		16.5862 mm	Not Qualified		92 dB				e0			225		300 ohm		20 ohm	16.5862 mm
ADG202AKP	Analog Devices	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	1	CMOS		J BEND		-15 V	15 V	+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1		4.57 mm		8.966 mm	Not Qualified	NO	80 dB				e0	BREAK-BEFORE-MAKE			300 ns	90 ohm	250 ns	5 ohm	8.966 mm
ADG406BP	Analog Devices	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BICMOS		J BEND	-16.5 V	-15 V	15 V	12/+-15	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J28		1	16.5 V	4.57 mm	.02 A	11.505 mm	Not Qualified		75 dB	13.5 V	CAN ALSO OPERATE WITH SINGLE 12V SUPPLY	-13.5 V	e0	BREAK-BEFORE-MAKE	30	225	150 ns	80 ohm	150 ns	4 ohm	11.505 mm
AD7590DIKPZ-REEL	Analog Devices	SPST	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	1.5 mA	4	1	CMOS		J BEND		-15 V	15 V		CHIP CARRIER			1.27 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQCC-J20		1		4.57 mm		8.965 mm	Not Qualified		85 dB		OVERVOLTAGE PROTECTION		e3			260	250 ns	90 ohm	400 ns	2 ohm	8.965 mm
AD7511DIKPZ	Analog Devices	SPST	COMMERCIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS		J BEND		-15 V	15 V		CHIP CARRIER			1.27 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQCC-J20		1		4.57 mm		8.966 mm	Not Qualified				OVERVOLTAGE PROTECTION		e3			260		100 ohm		.75 ohm	8.966 mm
ADG212AKP	Analog Devices	SPST	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY		4	1	CMOS		J BEND		-15 V	15 V	5,+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20	SEPARATE OUTPUT	1		4.57 mm		8.965 mm	Not Qualified	NO	80 dB				e0	BREAK-BEFORE-MAKE		225	600 ns	115 ohm	450 ns		8.965 mm
ADG529FBP	Analog Devices	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	20	QCCJ	SQUARE	YES	PLASTIC/EPOXY	.2 mA	1	4	CMOS		J BEND		-15 V	15 V	12/+-15	CHIP CARRIER	LDCC20,.4SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J20				4.57 mm	.02 A	8.9662 mm	Not Qualified		68 dB		FAULT PROTECTED; OVERVOLTAGE PROTECTION		e0	BREAK-BEFORE-MAKE			300 ns	300 ohm	300 ns	10 ohm	8.9662 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.