INDUSTRIAL Multiplexers & Switches 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
TS5V330PWRG4	Texas Instruments	SPDT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1			GULL WING			5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm		4.4 mm	Not Qualified		60 dB	4 V				e4		30	260	6 ns	7 ohm	6 ns		5 mm
TS3V330DR	Texas Instruments	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	4	4		300 kHz	GULL WING			3.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.75 mm		3.9 mm	Not Qualified		50 dB	3 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	6.5 ns	10 ohm	3.5 ns		9.9 mm	3.6 V
DS25CP102QSQ	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16		1	3.6 V	.8 mm		4 mm	Not Qualified			3 V				e0				20 ns		12 ns		4 mm
LMH6583YA/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	64	HTFQFP	SQUARE	YES	PLASTIC/EPOXY	98 mA	1	8		500 kHz	GULL WING				+-3.3/+-5	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64	SEPARATE OUTPUT	3		1.2 mm		10 mm	Not Qualified							e4	BREAK-BEFORE-MAKE	30	260					10 mm
TS3V340DGVRE4	Texas Instruments	SPDT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	4	1			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1	3.6 V	1.2 mm	.128 A	3.6 mm	Not Qualified		60 dB	3 V				e4		30	260	7 ns	6 ohm	7 ns		4.4 mm
SN65LVDT250DBTRG4	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	38	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	BICMOS		GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G38	SEPARATE OUTPUT	2	3.6 V	1.2 mm		4.4 mm	Not Qualified			3 V				e4		30	260	300 ns		6 ns		9.7 mm
DS10CP152TMA/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	70 mA	1				GULL WING			3.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.58 mm		3.91 mm	Not Qualified					0 V		e3	BREAK-BEFORE-MAKE	30	260	20000 ns				9.9 mm	1 V
TS3V330PW	Texas Instruments	SPDT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	4	4		300 kHz	GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.2 mm		4.4 mm	Not Qualified		50 dB	3 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	6.5 ns	10 ohm	3.5 ns		5 mm	3.6 V
TP4052AN	Texas Instruments		INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	4	CMOS		THROUGH-HOLE				5/15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-PDIP-T16							Not Qualified								BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED
TS5V330CDBQR	Texas Instruments	SPDT	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.003 mA	4	4		250 kHz	GULL WING			4.5 V	5	SMALL OUTLINE	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	2	5.5 V	1.75 mm		3.9 mm	Not Qualified	NO	54 dB	4 V				e4	BREAK-BEFORE-MAKE	30	260	6 ns	10 ohm	5.9 ns		4.9 mm
LMH6580VSX	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	48	TFQFP	SQUARE	YES	PLASTIC/EPOXY		1	8			GULL WING	-5.5 V	-3.3 V	3.3 V		FLATPACK, THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel		QUAD	S-PQFP-G48			5.5 V	1.2 mm		7 mm	Not Qualified		60 dB	3 V			-3 V									7 mm
LMH6570MA/NOPB	Texas Instruments	VIDEO MULTIPLEXER	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	16 mA	1	1			GULL WING	-6 V	-3.3 V	3.3 V	+-3.3/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SOP8,.25	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G8	COMMON OUTPUT	1	12 V	1.27 mm	.02 A	3.9 mm	Not Qualified	NC		6 V			-3 V	e3		30	260					4.9 mm
SN65LVDT250DBTG4	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	38	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	BICMOS		GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G38	SEPARATE OUTPUT	2	3.6 V	1.2 mm		4.4 mm	Not Qualified			3 V				e4		30	260	300 ns		6 ns		9.7 mm
TS5USBC410IYFFR	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	UNSPECIFIED	.022 mA	1	2		1200 kHz	BALL			3.3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-XBGA-B12		1	5.5 V	.625 mm		1.198 mm			25 dB	2.3 V				e1		30	260	250000 ns	9 ohm	1000 ns	.075 ohm	1.598 mm
CLV4052ATPWRG4Q1	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.02 mA	1	2	CMOS	50 kHz	GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	105 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm	.05 A	4.4 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	25 ns	225 ohm	25 ns	40 ohm	5 mm	5.5 V
SN65LVCP204RGZT	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	48	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	220 mA	1	4			GULL WING			3.3 V	3.3	SMALL OUTLINE	LCC48,.27SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	SEPARATE OUTPUT	3	3.465 V	1 mm		7 mm	Not Qualified			3.135 V				e4		30	260					7 mm
SN65LVCP402RGET	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	24	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	115 mA	1	2			NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24	SEPARATE OUTPUT	3	3.465 V	1 mm		4 mm	Not Qualified			3.135 V				e4		30	260	.7 ns		.7 ns		4 mm
TP4052BN	Texas Instruments		INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	4	CMOS		THROUGH-HOLE					IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-PDIP-T16							Not Qualified									NOT SPECIFIED	NOT SPECIFIED
TS3V330PWE4	Texas Instruments	SPDT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.2 mm		4.4 mm	Not Qualified		50 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	6.5 ns	7 ohm	3.5 ns		5 mm
TS3V340D	Texas Instruments	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA	4	4		500 kHz	GULL WING			3.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.75 mm	.128 A	3.9 mm	Not Qualified		60 dB	3 V				e4		30	260	7 ns	6 ohm	7 ns		9.9 mm
TS12A44515DRG4	Texas Instruments	SPST	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			3 V	3/12	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14		1	12 V	1.75 mm		3.9 mm	Not Qualified	NC	94 dB	2 V				e4	BREAK-BEFORE-MAKE	30	260	175 ns	40 ohm	120 ns	3.5 ohm	8.65 mm
TS3V712ELRTGR	Texas Instruments	VIDEO MULTIPLEXER	INDUSTRIAL	32	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.5 mA	1	7		1300 kHz	NO LEAD			3.3 V	3.3,5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.12X.24,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N32	SEPARATE OUTPUT	3	5.5 V	.8 mm		3 mm	Not Qualified	NO	38 dB	3 V		0 V		e4	BREAK-BEFORE-MAKE	30	260	13 ns	6 ohm	13 ns	1 ohm	6 mm	5.5 V
TS3V330DBQRE4	Texas Instruments	SPDT	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1			GULL WING			3.3 V	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	2	3.6 V	1.75 mm		3.9 mm	Not Qualified		50 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	6.5 ns	7 ohm	3.5 ns		4.9 mm
SN65LVCP404RGZT	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	48	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	220 mA	1	1			NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	SEPARATE OUTPUT	3	3.465 V	1 mm		7 mm	Not Qualified			3.135 V				e4		30	260					7 mm
TS5N412DBQRE4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4			GULL WING			5 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		2	5.25 V	1.75 mm		3.9 mm	Not Qualified		50 dB	4.75 V				e4		30	260	200 ns	12.5 ohm	200 ns		4.9 mm
LMH6586VS/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	80	TFQFP	SQUARE	YES	PLASTIC/EPOXY	360 mA	1	16		66 kHz	GULL WING			5 V	5	FLATPACK, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	SEPARATE OUTPUT	3		1.2 mm		12 mm	Not Qualified							e4	BREAK-BEFORE-MAKE	30	260					12 mm
SN65LVDS125ADBTR	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	38	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.145 mA	1	4	BICMOS		GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G38	SEPARATE OUTPUT	2	3.6 V	1.2 mm		4.4 mm	Not Qualified			3 V				e4		30	260	300 ns		6 ns		9.7 mm
MPC104AP	Texas Instruments	VIDEO MULTIPLEXER	INDUSTRIAL	8	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	2	BIPOLAR		THROUGH-HOLE		-5 V	5 V	+-5	IN-LINE	DIP8,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-PDIP-T8			5.5 V	5.08 mm		7.62 mm	Not Qualified		77 dB	4.5 V						NOT SPECIFIED	NOT SPECIFIED					9.81 mm
TS5V330PW	Texas Instruments	SPDT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.003 mA	4	4		300 kHz	GULL WING			5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm		4.4 mm	Not Qualified	NO	60 dB	4 V				e4	BREAK-BEFORE-MAKE	30	260	6 ns	10 ohm	6 ns		5 mm
DS25CP102TSQ	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	TIN	QUAD	S-XQCC-N16		1	3.6 V	.8 mm		4 mm	Not Qualified			3 V				e3				20000 ns		12 ns		4 mm
TP4052AJ	Texas Instruments		INDUSTRIAL	16	DIP	RECTANGULAR	NO	CERAMIC		1	4	CMOS		THROUGH-HOLE				5/15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-XDIP-T16							Not Qualified								BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED
TP4053BJ	Texas Instruments		INDUSTRIAL	16	DIP	RECTANGULAR	NO	CERAMIC		3	2	CMOS		THROUGH-HOLE				5/15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-XDIP-T16							Not Qualified								BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED
TS5V330CD	Texas Instruments	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1			GULL WING			4.5 V	5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G16	SEPARATE OUTPUT		5.5 V	1.75 mm		3.9 mm	Not Qualified		54 dB	4 V					BREAK-BEFORE-MAKE			6 ns	7 ohm	5.9 ns		9.9 mm
TS5V330DBQRE4	Texas Instruments	SPDT	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1			GULL WING			5 V	5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	2	5.5 V	1.75 mm		3.9 mm	Not Qualified		60 dB	4 V				e4	BREAK-BEFORE-MAKE	30	260	6 ns	7 ohm	6 ns		4.9 mm
SN65LVDT250DBTR	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	38	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.145 mA	1	4	BICMOS		GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G38	SEPARATE OUTPUT	2	3.6 V	1.2 mm		4.4 mm	Not Qualified			3 V				e4		30	260	300 ns		6 ns		9.7 mm
TS12A4516P	Texas Instruments	SPST	INDUSTRIAL	8	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	1	CMOS		THROUGH-HOLE	-1.95 V	-1.8 V	1.8 V	1.8/5	IN-LINE	DIP8,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-PDIP-T8	SEPARATE OUTPUT		1.95 V	5.08 mm		7.62 mm	Not Qualified	NO	83 dB	1 V	SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V		-1 V		BREAK-BEFORE-MAKE			120 ns	40 ohm	150 ns		9.81 mm
TS5V330D	Texas Instruments	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.003 mA	4	4		300 kHz	GULL WING			5 V	5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NO	60 dB	4 V				e4	BREAK-BEFORE-MAKE	30	260	6 ns	10 ohm	6 ns		9.9 mm
TS5USBC402IYFPR	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	UNSPECIFIED	.1 mA	1	2		1200 kHz	BALL			3.3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-XBGA-B12	SEPARATE OUTPUT	1	5.5 V	.5 mm		1.182 mm		NO	22 dB	2.3 V		0 V		e1	BREAK-BEFORE-MAKE	30	260	250000 ns	9 ohm	1000 ns	.07 ohm	1.582 mm	5.5 V
SN65LVDT125ADBTRG4	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	38	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	BICMOS		GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G38	SEPARATE OUTPUT		3.6 V	1.2 mm		4.4 mm	Not Qualified			3 V						NOT SPECIFIED	NOT SPECIFIED	300 ns		6 ns		9.7 mm
TS12A44513DRG4	Texas Instruments	SPST	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			3 V	3/12	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14		1	12 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	94 dB	2 V				e4	BREAK-BEFORE-MAKE	30	260	175 ns	40 ohm	120 ns	3.5 ohm	8.65 mm
TLC4066ID-00R	Texas Instruments	SPST	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS		GULL WING			5 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G14			12 V	1.75 mm		3.9 mm	Not Qualified			2 V								125 ns	200 ohm	210 ns	10 ohm	8.65 mm
DS25CP152TSQ	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	TIN	QUAD	S-XQCC-N16		1	3.6 V	.8 mm		4 mm	Not Qualified			3 V				e3				2000 ns		12 ns		4 mm
DS90CP02SPX/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	28	QCCN	SQUARE	YES	PLASTIC/EPOXY		1		CMOS		NO LEAD			3.3 V	3.3	CHIP CARRIER	LCC28,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N28	SEPARATE OUTPUT	3					Not Qualified							e3	BREAK-BEFORE-MAKE	30	260	150 ns
LMH6570MA	Texas Instruments	VIDEO MULTIPLEXER	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	16 mA	1	4			GULL WING	-6 V	-3.3 V	3.3 V	+-3.3/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SOP8,.25	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		1	6 V	1.27 mm	.02 A	3.9 mm	Not Qualified			3 V			-3 V	e0		20	235					4.9 mm
MPC104AU/2K5	Texas Instruments	VIDEO MULTIPLEXER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	5.3 mA	1	2	BIPOLAR		GULL WING	-5.5 V	-5 V	5 V	+-5	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G8			5.5 V	1.75 mm		3.9 mm	Not Qualified		79 dB	4.5 V			-4.5 V			NOT SPECIFIED	NOT SPECIFIED					4.9 mm
TP4052BJ	Texas Instruments		INDUSTRIAL	16	DIP	RECTANGULAR	NO	CERAMIC		1	4	CMOS		THROUGH-HOLE					IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-XDIP-T16							Not Qualified									NOT SPECIFIED	NOT SPECIFIED
DS25CP152TSQX/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	QCCN	SQUARE	YES	PLASTIC/EPOXY		1				NO LEAD			3.3 V	3.3	CHIP CARRIER	LCC16,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1					Not Qualified							e3	BREAK-BEFORE-MAKE	30	260	20000 ns
CLC532AJE	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	31 mA	1	2	BIPOLAR		GULL WING		-5 V	5 V	5,-5.2	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G14				1.75 mm	.02 A	3.9 mm	Not Qualified		80 dB					e0				20 ns				8.65 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.