Texas Instruments Multiplexers & Switches 2,360

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
TP4053BJ	Texas Instruments		INDUSTRIAL	16	DIP	RECTANGULAR	NO	CERAMIC		3	2	CMOS			THROUGH-HOLE				5/15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-XDIP-T16							Not Qualified								BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED
TL604IP3	Texas Instruments	SPST	OTHER	8	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2					THROUGH-HOLE					IN-LINE	DIP8,.3	Multiplexer or Switches	2.54 mm	85 Cel	-25 Cel		DUAL	R-PDIP-T8	SEPARATE OUTPUT							NO/NC							MAKE-BEFORE-BREAK
TS5V330CD	Texas Instruments	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1				GULL WING			4.5 V	5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G16	SEPARATE OUTPUT		5.5 V	1.75 mm		3.9 mm	Not Qualified		54 dB	4 V					BREAK-BEFORE-MAKE			6 ns	7 ohm	5.9 ns		9.9 mm
SN54HC4016FH	Texas Instruments	SPST	MILITARY	20	QCCN	SQUARE	YES	CERAMIC		4		CMOS			NO LEAD				2/12	CHIP CARRIER	LCC20,.35SQ	Multiplexer or Switches	1.27 mm	125 Cel	-55 Cel		QUAD	S-XQCC-N20	SEPARATE OUTPUT						Not Qualified	NO							BREAK-BEFORE-MAKE
SNJ54LV4053AJ	Texas Instruments	SINGLE-ENDED MULTIPLEXER	MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED	.02 mA	3	2	CMOS	MIL-PRF-38535		THROUGH-HOLE			2.3 V	3.3	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel		DUAL	R-GDIP-T16			5.5 V	5.08 mm	.05 A	7.62 mm	Not Qualified		45 dB	2 V								28 ns	180 ohm	28 ns	2 ohm	19.56 mm
SN54HC4052J	Texas Instruments	DIFFERENTIAL MULTIPLEXER	MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC		1	4	CMOS			THROUGH-HOLE				2/6,GND/-6	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel		DUAL	R-XDIP-T16					.025 A		Not Qualified								BREAK-BEFORE-MAKE
TL185CJ	Texas Instruments	DPST	COMMERCIAL	16	DIP	RECTANGULAR	NO	CERAMIC		2					THROUGH-HOLE					IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel		DUAL	R-XDIP-T16	SEPARATE OUTPUT						Not Qualified	NO							BREAK-BEFORE-MAKE
TS5V330DBQRE4	Texas Instruments	SPDT	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1				GULL WING			5 V	5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	Multiplexer or Switches	.635 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	2	5.5 V	1.75 mm		3.9 mm	Not Qualified		60 dB	4 V				e4	BREAK-BEFORE-MAKE	30	260	6 ns	7 ohm	6 ns		4.9 mm
SN65LVDT250DBTR	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	38	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.145 mA	1	4	BICMOS			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G38	SEPARATE OUTPUT	2	3.6 V	1.2 mm		4.4 mm	Not Qualified			3 V				e4		30	260	300 ns		6 ns		9.7 mm
TS12A4516P	Texas Instruments	SPST	INDUSTRIAL	8	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	1	CMOS			THROUGH-HOLE	-1.95 V	-1.8 V	1.8 V	1.8/5	IN-LINE	DIP8,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-PDIP-T8	SEPARATE OUTPUT		1.95 V	5.08 mm		7.62 mm	Not Qualified	NO	83 dB	1 V	SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V		-1 V		BREAK-BEFORE-MAKE			120 ns	40 ohm	150 ns		9.81 mm
SN54HC4066N	Texas Instruments	SPST	MILITARY	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY	.32 mA	4	1	CMOS			THROUGH-HOLE			5 V	2/12	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel		DUAL	R-PDIP-T14	SEPARATE OUTPUT			5.08 mm		7.62 mm	Not Qualified	NO							MAKE-BEFORE-BREAK	NOT SPECIFIED	NOT SPECIFIED	30 ns	220 ohm	54 ns	10 ohm	19.305 mm
TS5V330D	Texas Instruments	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.003 mA	4	4			300 kHz	GULL WING			5 V	5	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.75 mm		3.9 mm	Not Qualified	NO	60 dB	4 V				e4	BREAK-BEFORE-MAKE	30	260	6 ns	10 ohm	6 ns		9.9 mm
TS5USBC402IYFPR	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	12	VFBGA	RECTANGULAR	YES	UNSPECIFIED	.1 mA	1	2			1200 kHz	BALL			3.3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	R-XBGA-B12	SEPARATE OUTPUT	1	5.5 V	.5 mm		1.182 mm		NO	22 dB	2.3 V		0 V		e1	BREAK-BEFORE-MAKE	30	260	250000 ns	9 ohm	1000 ns	.07 ohm	1.582 mm	5.5 V
SN65LVDT125ADBTRG4	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	38	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	BICMOS			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G38	SEPARATE OUTPUT		3.6 V	1.2 mm		4.4 mm	Not Qualified			3 V						NOT SPECIFIED	NOT SPECIFIED	300 ns		6 ns		9.7 mm
TS12A44513DRG4	Texas Instruments	SPST	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING			3 V	3/12	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14		1	12 V	1.75 mm		3.9 mm	Not Qualified	NO/NC	94 dB	2 V				e4	BREAK-BEFORE-MAKE	30	260	175 ns	40 ohm	120 ns	3.5 ohm	8.65 mm
TLC4066ID-00R	Texas Instruments	SPST	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1	CMOS			GULL WING			5 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G14			12 V	1.75 mm		3.9 mm	Not Qualified			2 V								125 ns	200 ohm	210 ns	10 ohm	8.65 mm
SN54HC4051FH	Texas Instruments	SINGLE-ENDED MULTIPLEXER	MILITARY	20	QCCN	SQUARE	YES	CERAMIC		1	8	CMOS			NO LEAD				2/6,GND/-6	CHIP CARRIER	LCC20,.35SQ	Multiplexer or Switches	1.27 mm	125 Cel	-55 Cel		QUAD	S-XQCC-N20					.025 A		Not Qualified								BREAK-BEFORE-MAKE
TL607CJGP4	Texas Instruments	SPDT	COMMERCIAL	8	DIP	RECTANGULAR	NO	CERAMIC		1					THROUGH-HOLE					IN-LINE	DIP8,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel		DUAL	R-XDIP-T8															MAKE-BEFORE-BREAK
TL607CJG4	Texas Instruments	SPDT	COMMERCIAL	8	DIP	RECTANGULAR	NO	CERAMIC		1					THROUGH-HOLE					IN-LINE	DIP8,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel		DUAL	R-XDIP-T8															MAKE-BEFORE-BREAK
DS25CP152TSQ	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2				NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	TIN	QUAD	S-XQCC-N16		1	3.6 V	.8 mm		4 mm	Not Qualified			3 V				e3				2000 ns		12 ns		4 mm
TL188CNP3	Texas Instruments	SPDT	COMMERCIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1					THROUGH-HOLE					IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel		DUAL	R-PDIP-T14															BREAK-BEFORE-MAKE
DS90CP02SPX/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	28	QCCN	SQUARE	YES	PLASTIC/EPOXY		1		CMOS			NO LEAD			3.3 V	3.3	CHIP CARRIER	LCC28,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N28	SEPARATE OUTPUT	3					Not Qualified							e3	BREAK-BEFORE-MAKE	30	260	150 ns
TL191CJ	Texas Instruments	SPDT	COMMERCIAL	16	DIP	RECTANGULAR	NO	CERAMIC		2					THROUGH-HOLE					IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel		DUAL	R-XDIP-T16	SEPARATE OUTPUT						Not Qualified								BREAK-BEFORE-MAKE
TL601MJG/883B	Texas Instruments	SPDT	MILITARY	8	DIP	RECTANGULAR	NO	CERAMIC		1			MIL-STD-883 Class B (Modified)		THROUGH-HOLE					IN-LINE	DIP8,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel		DUAL	R-XDIP-T8							Not Qualified								MAKE-BEFORE-BREAK
LMH6570MA	Texas Instruments	VIDEO MULTIPLEXER	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	16 mA	1	4				GULL WING	-6 V	-3.3 V	3.3 V	+-3.3/+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SOP8,.25	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		1	6 V	1.27 mm	.02 A	3.9 mm	Not Qualified			3 V			-3 V	e0		20	235					4.9 mm
SN54HC4016J	Texas Instruments	SPST	MILITARY	14	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED	.32 mA	4	1	CMOS			THROUGH-HOLE			5 V	2/12	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel		DUAL	R-GDIP-T14	SEPARATE OUTPUT			5.08 mm		7.62 mm	Not Qualified	NO							BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED	30 ns	220 ohm	54 ns	10 ohm	19.56 mm
MPC104AU/2K5	Texas Instruments	VIDEO MULTIPLEXER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	5.3 mA	1	2	BIPOLAR			GULL WING	-5.5 V	-5 V	5 V	+-5	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G8			5.5 V	1.75 mm		3.9 mm	Not Qualified		79 dB	4.5 V			-4.5 V			NOT SPECIFIED	NOT SPECIFIED					4.9 mm
1P1G66QDBVRG4Q1	Texas Instruments	SPST	AUTOMOTIVE	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.5 mA	1	1	CMOS		300 kHz	GULL WING			2.3 V	1.8/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	125 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	COMMON OUTPUT	1	5.5 V	1.45 mm	.1 A	1.6 mm	Not Qualified	NO	42 dB	1.65 V		0 V		e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	9.5 ns	30 ohm	8.9 ns		2.9 mm	5.5 V
AH5010CN	Texas Instruments	SINGLE-ENDED MULTIPLEXER	OTHER	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	4	BIPOLAR			THROUGH-HOLE					IN-LINE			2.54 mm	85 Cel	-25 Cel		DUAL	R-PDIP-T14				5.08 mm		7.62 mm												500 ns	150 ohm	500 ns	4 ohm	19.18 mm
SNJ54LV4053AW	Texas Instruments	SINGLE-ENDED MULTIPLEXER	MILITARY	16	DFP	RECTANGULAR	YES	CERAMIC, GLASS-SEALED	.02 mA	3	2	CMOS	MIL-PRF-38535		FLAT			2.3 V	3.3	FLATPACK	FL16,.25	Multiplexer or Switches	1.27 mm	125 Cel	-55 Cel		DUAL	R-GDFP-F16			5.5 V	2.03 mm	.05 A	6.73 mm	Not Qualified		45 dB	2 V								28 ns	180 ohm	28 ns	2 ohm	10.16 mm
TL182IN	Texas Instruments	SPST	OTHER	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	1	BIMOS			THROUGH-HOLE		-15 V	15 V		IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	85 Cel	-25 Cel		DUAL	R-PDIP-T14	SEPARATE OUTPUT			5.08 mm		7.62 mm	Not Qualified	NC							BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED		100 ohm			19.305 mm
HPA02205RSER	Texas Instruments	DIFFERENTIAL MULTIPLEXER																								NICKEL PALLADIUM GOLD				1												e4		30	260
TP4052BJ	Texas Instruments		INDUSTRIAL	16	DIP	RECTANGULAR	NO	CERAMIC		1	4	CMOS			THROUGH-HOLE					IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-XDIP-T16							Not Qualified									NOT SPECIFIED	NOT SPECIFIED
DS25CP152TSQX/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	QCCN	SQUARE	YES	PLASTIC/EPOXY		1					NO LEAD			3.3 V	3.3	CHIP CARRIER	LCC16,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1					Not Qualified							e3	BREAK-BEFORE-MAKE	30	260	20000 ns
HPA02204RSER	Texas Instruments	DIFFERENTIAL MULTIPLEXER																								NICKEL PALLADIUM GOLD				1												e4		30	260
TL610CP	Texas Instruments	SPST	COMMERCIAL	8	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	1	BIMOS			THROUGH-HOLE	-25 V	-20 V	10 V		IN-LINE	DIP8,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel		DUAL	R-PDIP-T8			25 V	5.08 mm		7.62 mm	Not Qualified	NO		5 V			-5 V		BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED	150 ns	400 ohm	500 ns		9.81 mm
CLC532AJE	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	31 mA	1	2	BIPOLAR			GULL WING		-5 V	5 V	5,-5.2	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G14				1.75 mm	.02 A	3.9 mm	Not Qualified		80 dB					e0				20 ns				8.65 mm
SN65LVCP404RGZR	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	48	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	220 mA	1	1				NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	SEPARATE OUTPUT	3	3.465 V	1 mm		7 mm	Not Qualified			3.135 V				e4		30	260	6 ns				7 mm
TS5L100DGVR	Texas Instruments	SPDT	COMMERCIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.003 mA	4	1				GULL WING			6.2 V	6.2	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25,16	Multiplexer or Switches	.4 mm	70 Cel	0 Cel		DUAL	R-PDSO-G16			6.5 V	1.2 mm	.1 A	3.6 mm	Not Qualified		40 dB	6 V					BREAK-BEFORE-MAKE			7 ns	19 ohm	4 ns	1 ohm	4.4 mm
DS25CP114TSQ	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	40	HVQCCN	SQUARE	YES	UNSPECIFIED		1	1				NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel		QUAD	S-XQCC-N40			3.6 V	.8 mm		6 mm	Not Qualified			3 V												6 mm
TL188CN	Texas Instruments	SPDT	COMMERCIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	1	BIMOS			THROUGH-HOLE		-15 V	15 V		IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel		DUAL	R-PDIP-T14				5.08 mm		7.62 mm	Not Qualified								BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED		100 ohm			19.305 mm
TLC4016IN-00	Texas Instruments	SPST	INDUSTRIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS			THROUGH-HOLE			5 V		IN-LINE			2.54 mm	85 Cel	-40 Cel		DUAL	R-PDIP-T14			12 V	5.08 mm		7.62 mm	Not Qualified			2 V								25 ns	200 ohm	45 ns	10 ohm	19.305 mm
TL182CNP3	Texas Instruments	SPST	COMMERCIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2					THROUGH-HOLE					IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel		DUAL	R-PDIP-T14	SEPARATE OUTPUT							NC							BREAK-BEFORE-MAKE
TS5N214DBQRG4	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4				GULL WING			5 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		2	5.25 V	1.75 mm		3.9 mm	Not Qualified		50 dB	4.75 V				e4		30	260	200 ns	12.5 ohm	200 ns		4.9 mm
SNJ54HC4316FK	Texas Instruments	SPST	MILITARY	20	QCCN	SQUARE	YES	CERAMIC		4		CMOS	38535Q/M;38534H;883B		NO LEAD				2/6,GND/-6	CHIP CARRIER	LCC20,.35SQ	Multiplexer or Switches	1.27 mm	125 Cel	-55 Cel		QUAD	S-XQCC-N20	SEPARATE OUTPUT						Not Qualified	NO							BREAK-BEFORE-MAKE
TS3V330DRG4	Texas Instruments	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1				GULL WING			3.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.75 mm		3.9 mm	Not Qualified		50 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	6.5 ns	7 ohm	3.5 ns		9.9 mm
TL182CN	Texas Instruments	SPST	COMMERCIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2	1	BIMOS			THROUGH-HOLE		-15 V	15 V		IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel		DUAL	R-PDIP-T14	SEPARATE OUTPUT			5.08 mm		7.62 mm	Not Qualified	NC							BREAK-BEFORE-MAKE	NOT SPECIFIED	NOT SPECIFIED		100 ohm			19.305 mm
TS5N214PWRG4	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4				GULL WING			5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1	5.25 V	1.2 mm		4.4 mm	Not Qualified		50 dB	4.75 V				e4		30	260	200 ns	12.5 ohm	200 ns		5 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.