Texas Instruments Multiplexers & Switches 2,360

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Maximum Signal Current	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Maximum Positive Input Voltage	Nominal On-state Resistance Match	Length	Maximum Input Voltage
SN54HC4066N-00	Texas Instruments	SPST	MILITARY	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS			THROUGH-HOLE			5 V		IN-LINE			2.54 mm	125 Cel	-55 Cel		DUAL	R-PDIP-T14			12 V	5.08 mm		7.62 mm	Not Qualified			2 V								30 ns	220 ohm	54 ns		10 ohm	19.305 mm
SN54HC4051J	Texas Instruments	SINGLE-ENDED MULTIPLEXER	MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC		1	8	CMOS			THROUGH-HOLE				2/6,GND/-6	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel		DUAL	R-XDIP-T16					.025 A		Not Qualified								BREAK-BEFORE-MAKE
TS12A44514DR	Texas Instruments	SPST	INDUSTRIAL	14	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.0002 mA	4	4	CMOS		530 kHz	GULL WING			3 V	3/12	SMALL OUTLINE	SOP14,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	SEPARATE OUTPUT	1	12 V	1.75 mm		3.9 mm	Not Qualified	NO	94 dB	2 V				e4	BREAK-BEFORE-MAKE	30	260	175 ns	40 ohm	120 ns		3.5 ohm	8.65 mm
TP4051AN	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	8	CMOS			THROUGH-HOLE					IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-PDIP-T16							Not Qualified
SN65LVCP204RGZR	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	48	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	.115 mA	1	4				GULL WING			3.3 V	3.3	SMALL OUTLINE	LCC48,.27SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	SEPARATE OUTPUT	3	3.465 V	1 mm		7 mm	Not Qualified			3.135 V				e4		30	260						7 mm
V62/03666-01XE	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.02 mA	3	3	CMOS		50 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	105 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm	.05 A	4.4 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	28 ns	180 ohm	28 ns		2 ohm	5 mm	5.5 V
TP4016AN	Texas Instruments		INDUSTRIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4		CMOS			THROUGH-HOLE				3/15	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-PDIP-T14	SEPARATE OUTPUT						Not Qualified	NO								NOT SPECIFIED	NOT SPECIFIED		840 ohm
DS90CP02SP/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	28	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	60 mA	1		CMOS			NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N28	SEPARATE OUTPUT	3		.6 mm		5 mm	Not Qualified							e3	BREAK-BEFORE-MAKE	30	260	150 ns					5 mm
TS12A4517DBVR	Texas Instruments	SPST	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.5 mA	1	1	CMOS		464 kHz	GULL WING	-1.95 V	-1.8 V	1.8 V	+-5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Multiplexer or Switches	.95 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	SEPARATE OUTPUT	1	1.95 V	1.45 mm		1.6 mm	Not Qualified	NC	83 dB	1 V	SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V		-1 V	e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	120 ns	40 ohm	150 ns			2.9 mm
TL191CJP4	Texas Instruments	SPDT	COMMERCIAL	16	DIP	RECTANGULAR	NO	CERAMIC		2					THROUGH-HOLE					IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel		DUAL	R-XDIP-T16	SEPARATE OUTPUT														BREAK-BEFORE-MAKE
TPD13S523RSVR	Texas Instruments	SPST	INDUSTRIAL		VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA		13				NO LEAD					CHIP CARRIER, VERY THIN PROFILE			.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N16	COMMON OUTPUT	1	5.5 V	.55 mm		1.8 mm				4.5 V				e4		30	260						2.6 mm
SN65LVCP404RGZTG4	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	48	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		1	1				NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	SEPARATE OUTPUT	3	3.465 V	1 mm		7 mm	Not Qualified			3.135 V				e4		30	260						7 mm
CLV4051ATDWRG4Q1	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.02 mA	1	1	CMOS		35 kHz	GULL WING			2.3 V	3.3	SMALL OUTLINE	SOP16,.4	Multiplexer or Switches	1.27 mm	105 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	2.65 mm	.05 A	7.5 mm	Not Qualified		45 dB	2 V		0 V		e4		30	260	25 ns	225 ohm	25 ns		2.1 ohm	10.3 mm	5.5 V
TL601CJG4	Texas Instruments	SPDT	COMMERCIAL	8	DIP	RECTANGULAR	NO	CERAMIC		1					THROUGH-HOLE					IN-LINE	DIP8,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel		DUAL	R-XDIP-T8															MAKE-BEFORE-BREAK
TP4316AN	Texas Instruments	SPST	INDUSTRIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4		CMOS			THROUGH-HOLE					IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-PDIP-T14	SEPARATE OUTPUT						Not Qualified	NO
TS12A4515D	Texas Instruments	SPST	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.08 mA	1	1	CMOS		475 kHz	GULL WING			3.3 V	3/5/12	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	SEPARATE OUTPUT	1	3.6 V	1.75 mm		3.9 mm	Not Qualified	NC	94 dB	3 V	ALSO OPERATES WITH 12V AND 5V			e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	175 ns	40 ohm	120 ns			4.9 mm
TS5N412PWG4	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.01 mA	1	4				GULL WING			5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	COMMON OUTPUT	1	5.25 V	1.2 mm		4.4 mm	Not Qualified	NC	50 dB	4.75 V		0 V		e4		30	260	200 ns	12.5 ohm	200 ns			5 mm	10 V
TS5N214PWR	Texas Instruments	DIFFERENTIAL MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	10 mA	1	2			25 kHz	GULL WING			5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.25 V	1.2 mm		4.4 mm	Not Qualified		50 dB	4.75 V		0 V		e4		30	260	200 ns	12.5 ohm	200 ns			5 mm	10 V
TLC4066IN-10	Texas Instruments	SPST	INDUSTRIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS			THROUGH-HOLE			5 V		IN-LINE			2.54 mm	85 Cel	-40 Cel		DUAL	R-PDIP-T14			12 V	5.08 mm		7.62 mm	Not Qualified			2 V								125 ns	200 ohm	210 ns		10 ohm	19.305 mm
SN65LVDS250DBTRG4	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	38	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.145 mA	1	4	BICMOS			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G38	SEPARATE OUTPUT	2	3.6 V	1.2 mm		4.4 mm	Not Qualified			3 V				e4		NOT SPECIFIED	260	300 ns		6 ns			9.7 mm
SN54LV4052AW	Texas Instruments	DIFFERENTIAL MULTIPLEXER	MILITARY	16	DFP	RECTANGULAR	YES	CERAMIC, GLASS-SEALED		1	4	CMOS			FLAT			2.3 V		FLATPACK			1.27 mm	125 Cel	-55 Cel		DUAL	R-GDFP-F16			5.5 V	2.03 mm		6.73 mm	Not Qualified		45 dB	2 V								28 ns	180 ohm	28 ns		30 ohm	10.16 mm
AH5012CN	Texas Instruments	SPST	OTHER	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	BIPOLAR			THROUGH-HOLE					IN-LINE			2.54 mm	85 Cel	-25 Cel		DUAL	R-PDIP-T16				5.08 mm		7.62 mm												500 ns	150 ohm	500 ns		4 ohm	21.755 mm
SNJ54HC4066FK	Texas Instruments		MILITARY	20	QCCN	SQUARE	YES	CERAMIC		4		CMOS			NO LEAD				2/12	CHIP CARRIER	LCC20,.35SQ	Multiplexer or Switches	1.27 mm	125 Cel	-55 Cel		QUAD	S-XQCC-N20	SEPARATE OUTPUT						Not Qualified	NO							MAKE-BEFORE-BREAK	NOT SPECIFIED	NOT SPECIFIED
TL182MJ	Texas Instruments	SPST	MILITARY	14	DIP	RECTANGULAR	NO	CERAMIC		2					THROUGH-HOLE					IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel		DUAL	R-XDIP-T14	SEPARATE OUTPUT						Not Qualified	NC							BREAK-BEFORE-MAKE
TL52055DRG4	Texas Instruments	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		3	2	BICMOS			GULL WING			5 V	5/9	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1	9 V	1.75 mm		3.9 mm	Not Qualified			4.5 V				e4		30	260						9.9 mm
TP4051AJ	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	CERAMIC		1	8	CMOS			THROUGH-HOLE					IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-XDIP-T16							Not Qualified
TS3V330DE4	Texas Instruments	SPDT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		4	1				GULL WING			3.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.75 mm		3.9 mm	Not Qualified		50 dB	3 V				e4	BREAK-BEFORE-MAKE	30	260	6.5 ns	7 ohm	3.5 ns			9.9 mm
DS90CP22MTX	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	BIPOLAR			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.1 mm		4.4 mm	Not Qualified			3 V				e0			260	55 ns		4.5 ns			5 mm
TLC4066IN	Texas Instruments	SPST	INDUSTRIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS			THROUGH-HOLE			5 V	2/12	IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel		DUAL	R-PDIP-T14	SEPARATE OUTPUT			5.08 mm		7.62 mm	Not Qualified	NO							MAKE-BEFORE-BREAK	NOT SPECIFIED	NOT SPECIFIED	25 ns	200 ohm	45 ns		10 ohm	19.305 mm
HPA02141ERTER	Texas Instruments	AUDIO/VIDEO SWITCH																								NICKEL PALLADIUM GOLD				2												e4		30	260
TS12A4515DRG4	Texas Instruments	SPST	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.08 mA	1	1	CMOS		475 kHz	GULL WING			3.3 V	3/5/12	SMALL OUTLINE	SOP8,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	SEPARATE OUTPUT	1	3.6 V	1.75 mm		3.9 mm	Not Qualified	NC	94 dB	3 V	ALSO OPERATES WITH 12V AND 5V			e4	BREAK-BEFORE-MAKE	NOT SPECIFIED	260	175 ns	40 ohm	120 ns			4.9 mm
SN54HC4016J-00	Texas Instruments	SPST	MILITARY	14	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		4	1	CMOS			THROUGH-HOLE			5 V		IN-LINE			2.54 mm	125 Cel	-55 Cel		DUAL	R-GDIP-T14			12 V	5.08 mm		7.62 mm	Not Qualified			2 V								30 ns	220 ohm	54 ns		10 ohm	19.56 mm
LMH6583YA	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	64	HTFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16				GULL WING	-5.5 V	-5 V	5 V		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel		QUAD	S-PQFP-G64		3	5.5 V	1.2 mm		10 mm	Not Qualified		65 dB	3 V			-3 V										10 mm
SN54LV4066AW	Texas Instruments	SPST	MILITARY	14	DFP	RECTANGULAR	YES	CERAMIC, GLASS-SEALED		4	1	CMOS	MIL-STD-883		FLAT			2.5 V		FLATPACK			1.27 mm	125 Cel	-55 Cel		DUAL	R-GDFP-F14			5.5 V	2.03 mm		6.285 mm	Not Qualified		40 dB	2 V								25 ns	180 ohm	25 ns		6 ohm	9.21 mm
TL610MP	Texas Instruments	SPST	MILITARY	8	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	1	BIMOS			THROUGH-HOLE	-25 V	-20 V	10 V		IN-LINE			2.54 mm	125 Cel	-55 Cel		DUAL	R-PDIP-T8			25 V	5.08 mm		7.62 mm	Not Qualified			5 V			-5 V					150 ns	300 ohm	500 ns			9.81 mm
SN54HC4016FK	Texas Instruments	SPST	MILITARY	20	QCCN	SQUARE	YES	CERAMIC		4		CMOS			NO LEAD				2/12	CHIP CARRIER	LCC20,.35SQ	Multiplexer or Switches	1.27 mm	125 Cel	-55 Cel		QUAD	S-XQCC-N20	SEPARATE OUTPUT						Not Qualified	NO							BREAK-BEFORE-MAKE
SN65LVDT125DBT	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	38	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4	BICMOS			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G38	SEPARATE OUTPUT		3.6 V	1.2 mm		4.4 mm	Not Qualified			3 V						NOT SPECIFIED	NOT SPECIFIED	50 ns		6 ns			9.7 mm
TL601CJGP4	Texas Instruments	SPDT	COMMERCIAL	8	DIP	RECTANGULAR	NO	CERAMIC		1					THROUGH-HOLE					IN-LINE	DIP8,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel		DUAL	R-XDIP-T8															MAKE-BEFORE-BREAK
TL182CJ4	Texas Instruments	SPST	COMMERCIAL	14	DIP	RECTANGULAR	NO	CERAMIC		2					THROUGH-HOLE					IN-LINE	DIP14,.3	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel		DUAL	R-XDIP-T14	SEPARATE OUTPUT							NC							BREAK-BEFORE-MAKE
TS5N412PWR	Texas Instruments	SINGLE-ENDED MULTIPLEXER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4				GULL WING			5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1	5.25 V	1.2 mm		4.4 mm	Not Qualified		50 dB	4.75 V				e4		30	260	200 ns	12.5 ohm	200 ns			5 mm
XTS5USBC410YFFR	Texas Instruments	CROSS POINT SWITCH
SN54HC4016N-00	Texas Instruments	SPST	MILITARY	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS			THROUGH-HOLE			5 V		IN-LINE			2.54 mm	125 Cel	-55 Cel		DUAL	R-PDIP-T14			12 V	5.08 mm		7.62 mm	Not Qualified			2 V								30 ns	220 ohm	54 ns		10 ohm	19.305 mm
SN65LVCP22PWG4	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	87 mA	1	2	BICMOS			GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.2 mm		4.4 mm	Not Qualified			3 V	CONFIGURABLE AS 2:1 MUX, 1:2 DEMUX, REPEATER OR 1:2 SIGNAL SPLITTER			e4		30	260	4 ns		4 ns			5 mm
HPA02141EYFFR	Texas Instruments	AUDIO/VIDEO SWITCH	INDUSTRIAL	16	VFBGA	SQUARE	YES	UNSPECIFIED	.01 mA	2					BALL			3.3 V	3.3	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA16,4X4,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-XBGA-B16	SEPARATE OUTPUT	1	4.5 V	.425 mm			Not Qualified	NO		2.7 V		2.7 V		e1	BREAK-BEFORE-MAKE	30	260		10 ohm		4.5 V			4.5 V
TLC4066IN-00	Texas Instruments	SPST	INDUSTRIAL	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS			THROUGH-HOLE			5 V		IN-LINE			2.54 mm	85 Cel	-40 Cel		DUAL	R-PDIP-T14			12 V	5.08 mm		7.62 mm	Not Qualified			2 V								125 ns	200 ohm	210 ns		10 ohm	19.305 mm
DS25CP102QSQX/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	90 mA	1			AEC-Q100		NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1		.75 mm		4 mm	Not Qualified							e3	BREAK-BEFORE-MAKE	30	260	20000 ns					4 mm
TS5V330CPWR	Texas Instruments	SPDT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.003 mA	4	4			250 kHz	GULL WING			4.5 V	5	SMALL OUTLINE	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	5.5 V	1.2 mm		4.4 mm	Not Qualified	NO	54 dB	4 V				e4	BREAK-BEFORE-MAKE	30	260	6 ns	10 ohm	5.9 ns			5 mm
SN54HC4066N-10	Texas Instruments	SPST	MILITARY	14	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		4	1	CMOS			THROUGH-HOLE			5 V		IN-LINE			2.54 mm	125 Cel	-55 Cel		DUAL	R-PDIP-T14			12 V	5.08 mm		7.62 mm	Not Qualified			2 V								30 ns	220 ohm	54 ns		10 ohm	19.305 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.