BATTERY CHARGE CONTROLLER Power Management ICs 271

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Control Mode	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold	Nominal Output Voltage	Maximum Input Voltage
LT3652HVEMSE#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	12	HTSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	3.5 mA		1	1	BIPOLAR	GULL WING		20 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP12,.19		.65 mm	125 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G12	1	34 V	1.1 mm	3 mm	Not Qualified	4.95 V				e3	30	260		4.039 mm
LTC4121EUD#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1			NO LEAD		15 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		.5 mm	125 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N16		40 V	.8 mm	3 mm		4.4 V				e3			+2.21V	3 mm	YES
LTC4121EUD#TRPBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1			NO LEAD		15 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		.5 mm	125 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N16		40 V	.8 mm	3 mm		4.4 V				e3			+2.21V	3 mm	YES
LT3652HVIMSE#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	12	HTSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	3.5 mA		1	1	BIPOLAR	GULL WING		20 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP12,.19		.65 mm	125 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G12	1	34 V	1.1 mm	3 mm	Not Qualified	4.95 V				e3	30	260		4.039 mm
LT3652HVEDD#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	12	HVSON	SQUARE	YES		PLASTIC/EPOXY	3.5 mA		1	1	BIPOLAR	NO LEAD		20 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC12,.12,18		.45 mm	125 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-N12	1	34 V	.8 mm	3 mm	Not Qualified	4.95 V				e3	30	260		3 mm
LT3652HVIDD#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	12	HVSON	SQUARE	YES		PLASTIC/EPOXY	3.5 mA		1	1	BIPOLAR	NO LEAD		20 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC12,.12,18		.45 mm	125 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-N12	1	34 V	.8 mm	3 mm	Not Qualified	4.95 V				e3	30	260		3 mm
LTC4121EUD-4.2#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1			NO LEAD		15 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		.5 mm	125 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N16		40 V	.8 mm	3 mm		4.4 V				e3			+2.21V	3 mm	YES
LTC4011EFE	Linear Technology	BATTERY CHARGE CONTROLLER	COMMERCIAL	20	HTSSOP	RECTANGULAR	YES	615 kHz	PLASTIC/EPOXY			1			GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	70 Cel		0 Cel	TIN LEAD	DUAL	R-PDSO-G20	1		1.2 mm	4.4 mm	Not Qualified		12 V		4.5 V	e0		245		6.5 mm			34 V
LTC4121EUD-4.2#TRPBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1			NO LEAD		15 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		.5 mm	125 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N16		40 V	.8 mm	3 mm		4.4 V				e3			+2.21V	3 mm	YES
BQ25731RSNR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	32	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	5		NO LEAD				BUCK-BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.16SQ,16		.4 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32	1	26 V	.8 mm	4 mm		3.5 V				e4	30	260		4 mm	YES
MAX1926ETC	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	12	HVQCCN	SQUARE	YES	235 kHz	UNSPECIFIED		.1 A	1	1	BICMOS	NO LEAD		5 V	4	SINGLE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.16SQ,32	Power Management Circuits	.8 mm	85 Cel	CURRENT/VOLTAGE-MODE	-40 Cel	TIN LEAD	QUAD	S-XQCC-N12	1	12 V	.8 mm	4 mm	Not Qualified	4.25 V	5 V		4.5 V	e0			+4V	4 mm	YES		12 V
MAX1926ETC+	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	12	HVQCCN	SQUARE	YES	235 kHz	UNSPECIFIED		.1 A	1	1	BICMOS	NO LEAD		5 V		SINGLE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.16SQ,32		.8 mm	85 Cel	CURRENT/VOLTAGE-MODE	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N12	1	12 V	.8 mm	4 mm	Not Qualified	4.25 V	5 V		4.5 V	e3	30	260	+4V	4 mm	YES		12 V
MAX1873REEE-T	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	330 kHz	PLASTIC/EPOXY		.05 A	1		BICMOS	GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1		1.75 mm	3.9 mm	Not Qualified		18 V		6 V	e0				4.89 mm			28 V
MAX1873REEE+T	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	330 kHz	PLASTIC/EPOXY		.05 A	1	2	BICMOS	GULL WING	PULSE WIDTH MODULATION	18 V		SINGLE	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		.635 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	28 V	1.75 mm	3.9 mm	Not Qualified	6 V	18 V		6 V	e3	30	260		4.89 mm	YES		28 V
LTC4006EGN-4#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA		1	1		GULL WING		20 V			SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		.635 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	28 V	1.75 mm	3.899 mm	Not Qualified	6 V				e3	30	260	+4.7V	4.8895 mm	YES
LTC4121IUD#TRPBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1			NO LEAD		15 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		.5 mm	125 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N16		40 V	.8 mm	3 mm		4.4 V				e3			+2.21V	3 mm	YES
LTC4121IUD#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1			NO LEAD		15 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		.5 mm	125 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N16		40 V	.8 mm	3 mm		4.4 V				e3			+2.21V	3 mm	YES
MAX1757EAI	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	330 kHz	PLASTIC/EPOXY			1			GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE			.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	1		1.99 mm	5.29 mm	Not Qualified		12 V		6 V	e0		245		10.2 mm			14 V
LTC4121IUD-4.2#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1			NO LEAD		15 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		.5 mm	125 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N16		40 V	.8 mm	3 mm		4.4 V				e3			+2.21V	3 mm	YES
LTC4006EGN-6#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA		1	1		GULL WING		20 V			SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		.635 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	28 V	1.75 mm	3.899 mm	Not Qualified	6 V				e3	30	260	+4.7V	4.8895 mm	YES
MAX1736EUT42-T	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1			GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	1		1.45 mm	1.625 mm	Not Qualified		10 V		4.7 V	e0		245		2.9 mm			22 V
MAX1736EUT42+T	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1			GULL WING					SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm				Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6	1		1.45 mm	1.625 mm						e3	30	260		2.9 mm
MAX1873REEE	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	330 kHz	PLASTIC/EPOXY		.05 A	1		BICMOS	GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1		1.73 mm	3.9 mm	Not Qualified		18 V		6 V	e0	20	240		4.89 mm			28 V
MAX1873REEE+	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	330 kHz	PLASTIC/EPOXY		.05 A	1	2	BICMOS	GULL WING	PULSE WIDTH MODULATION	18 V		SINGLE	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		.635 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	28 V	1.75 mm	3.9 mm	Not Qualified	6 V	18 V		6 V	e3	30	260		4.89 mm	YES		28 V
LTC4121IUD-4.2#TRPBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1			NO LEAD		15 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		.5 mm	125 Cel		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N16		40 V	.8 mm	3 mm		4.4 V				e3			+2.21V	3 mm	YES
LTC4006EGN-6#TRPBF	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA		1	1		GULL WING		20 V			SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		.635 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	28 V	1.75 mm	3.899 mm	Not Qualified	6 V				e3	30	260	+4.7V	4.8895 mm	YES
LTC4006EGN-4#TRPBF	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA		1	1		GULL WING		20 V			SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		.635 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	28 V	1.75 mm	3.899 mm	Not Qualified	6 V				e3	30	260	+4.7V	4.8895 mm	YES
LTC4065LXEDC-4.1#TRMPBF	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	HVSON	SQUARE	YES		PLASTIC/EPOXY	.25 mA		1		CMOS	NO LEAD		5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.08,20		.5 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-N6	1	5.5 V	.8 mm	2 mm		3.75 V		SEATED HT-CALCULATED		e3	30	260		2 mm	NO
LTC4000EUFD-1#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	28	HVQCCN	RECTANGULAR	YES		PLASTIC/EPOXY			1		CMOS	NO LEAD					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.16X.2,20		.5 mm	125 Cel		-40 Cel	MATTE TIN	QUAD	R-PQCC-N28	1	60 V	.8 mm	4 mm		3 V		SEATED HT-CALCULATED		e3	30	260		5 mm
LTC4000IGN-1#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	28	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1		CMOS	GULL WING					SMALL OUTLINE, SHRINK PITCH	SSOP28,.25		.635 mm	125 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G28	1	60 V	1.75 mm	3.9 mm		3 V				e3	30	260		9.9 mm
LTC4065LEDC-4.1#TRMPBF	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	HVSON	SQUARE	YES		PLASTIC/EPOXY	.25 mA		1		CMOS	NO LEAD		5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.08,20		.5 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-N6	1	5.5 V	.8 mm	2 mm		3.75 V		SEATED HT-CALCULATED		e3	30	260		2 mm	NO
MAX1873TEEE-T	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	330 kHz	PLASTIC/EPOXY		.05 A	1		BICMOS	GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1		1.75 mm	3.9 mm	Not Qualified		18 V		6 V	e0				4.89 mm			28 V
MAX1873TEEE+T	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	330 kHz	PLASTIC/EPOXY		.05 A	1	4	BICMOS	GULL WING	PULSE WIDTH MODULATION	18 V		SINGLE	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		.635 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	28 V	1.75 mm	3.9 mm	Not Qualified	6 V	18 V		6 V	e3	30	260		4.89 mm	YES		28 V
LTC4000IUFD-1#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	28	HVQCCN	RECTANGULAR	YES		PLASTIC/EPOXY			1		CMOS	NO LEAD					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.16X.2,20		.5 mm	125 Cel		-40 Cel	MATTE TIN	QUAD	R-PQCC-N28	1	60 V	.8 mm	4 mm		3 V		SEATED HT-CALCULATED		e3	30	260		5 mm
ADP5090ACPZ-1-R7	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES		UNSPECIFIED			1			NO LEAD					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm				MATTE TIN	QUAD	S-XQCC-N16	3		.8 mm	3 mm						e3	30	260		3 mm
LTC4006EGN-4#TR	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA		1	1		GULL WING		20 V			SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		.635 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	28 V	1.75 mm	3.899 mm	Not Qualified	6 V				e0			+4.7V	4.8895 mm	YES
LTC4065LEDC#TRMPBF	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	HVSON	SQUARE	YES		PLASTIC/EPOXY	.25 mA		1		CMOS	NO LEAD		5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.08,20		.5 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-N6	1	5.5 V	.8 mm	2 mm	Not Qualified	3.75 V		SEATED HT-CALCULATED		e3				2 mm	NO
LT3652HVEMSE#TRPBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	12	HTSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	3.5 mA		1	1	BIPOLAR	GULL WING		20 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP12,.19		.65 mm	125 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G12	1	34 V	1.1 mm	3 mm	Not Qualified	4.95 V				e3	30	260		4.039 mm
LTC4000EGN-1#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	28	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1		CMOS	GULL WING					SMALL OUTLINE, SHRINK PITCH	SSOP28,.25		.635 mm	125 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G28	1	60 V	1.75 mm	3.9 mm		3 V				e3	30	260		9.9 mm
MAX1873TEEE	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	330 kHz	PLASTIC/EPOXY		.05 A	1		BICMOS	GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1		1.73 mm	3.9 mm	Not Qualified		18 V		6 V	e0	20	240		4.89 mm			28 V
MAX1873TEEE+	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	330 kHz	PLASTIC/EPOXY		.05 A	1	4	BICMOS	GULL WING	PULSE WIDTH MODULATION	18 V		SINGLE	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		.635 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	28 V	1.75 mm	3.9 mm	Not Qualified	6 V	18 V		6 V	e3	30	260		4.89 mm	YES		28 V
LT1511ISW#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	24	SOP	RECTANGULAR	YES	230 kHz	PLASTIC/EPOXY	7 mA	4 A	1	1	BIPOLAR	GULL WING	PULSE WIDTH MODULATION	16 V		SINGLE	SMALL OUTLINE	SOP24,.4		1.27 mm	85 Cel	CURRENT-MODE	-40 Cel	MATTE TIN	DUAL	R-PDSO-G24	1	28 V	2.642 mm	7.493 mm	Not Qualified		16 V		11 V	e3	30	260	+7V	15.395 mm	YES	2.465 V	28 V
LTM8061IV-8.4#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	77	LGA	RECTANGULAR	YES		PLASTIC/EPOXY			1			NO LEAD					GRID ARRAY	LGA77,7X11,50		1.27 mm	125 Cel		-40 Cel	GOLD	BOTTOM	R-PBGA-N77	3	32 V	4.42 mm	9 mm	Not Qualified	4.95 V				e4				15 mm
TPS65552ADGQ	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	10	HTSSOP	SQUARE	YES		PLASTIC/EPOXY		3 A	1			GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel		-35 Cel		DUAL	S-PDSO-G10	2		1.1 mm	3 mm	Not Qualified		5 V		4.5 V		30	250		3 mm			5.5 V
TPS65552ADGQR	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	10	HTSSOP	SQUARE	YES		PLASTIC/EPOXY		3 A	1			GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel		-35 Cel		DUAL	S-PDSO-G10	2		1.1 mm	3 mm	Not Qualified		5 V		4.5 V		30	250		3 mm			5.5 V
ADP5090ACPZ-2-R7	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	16	HVQCCN	SQUARE	YES		UNSPECIFIED			1			NO LEAD					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm				MATTE TIN	QUAD	S-XQCC-N16	3		.8 mm	3 mm						e3	30	260		3 mm
BQ2004ESNG4	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	16	SOP	RECTANGULAR	YES	300 kHz	PLASTIC/EPOXY			1		CMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE			1.27 mm	70 Cel	CURRENT-MODE	-20 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1		1.78 mm	3.935 mm	Not Qualified		5 V		4.5 V	e4	30	260		9.97 mm			5.5 V
STNS01PUR	STMicroelectronics	BATTERY CHARGE CONTROLLER	INDUSTRIAL	12	HVSON	SQUARE	YES		PLASTIC/EPOXY			1			NO LEAD					SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.45 mm					DUAL	S-PDSO-N12			.8 mm	3 mm							NOT SPECIFIED	NOT SPECIFIED		3 mm

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.