BATTERY CHARGE CONTROLLER Power Management ICs 271

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Control Mode	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold	Nominal Output Voltage	Maximum Input Voltage
MAX2003ACPE	Maxim Integrated	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	DIP	RECTANGULAR	NO	100 kHz	PLASTIC/EPOXY	2.2 mA		1		CMOS	THROUGH-HOLE				SINGLE	IN-LINE			2.54 mm	70 Cel	CURRENT-MODE	0 Cel	TIN LEAD	DUAL	R-PDIP-T16			4.572 mm	7.62 mm	Not Qualified		5 V	4.5 V	e0		245		19.175 mm			5.5 V
MAX8713ETG	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	24	HVQCCN	SQUARE	YES	400 kHz	UNSPECIFIED	6 mA		1	1	BICMOS	NO LEAD	CONSTANT OFF TIME	12 V		PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20		.5 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	QUAD	S-XQCC-N24	1	28 V	.8 mm	4 mm	Not Qualified	7.5 V	3.3 V	2.7 V	e0			+0.1V	4 mm	NO		5.5 V
MAX1736EUT41-T	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1			GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	1		1.45 mm	1.625 mm	Not Qualified		10 V	4.7 V	e0		245		2.9 mm			22 V
MAX1645AEEI-T	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	400 kHz	PLASTIC/EPOXY			1	3		GULL WING	CONSTANT OFF TIME			BOOST	SMALL OUTLINE				85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	1				Not Qualified		18 V	8 V	e0		245			YES		28 V
MAX1736EUT-T	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1			GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	1		1.45 mm	1.625 mm	Not Qualified		10 V	4.7 V	e0				2.9 mm			22 V
MAX2003ACWE+	Maxim Integrated	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	SOP	RECTANGULAR	YES	100 kHz	PLASTIC/EPOXY	2.2 mA		1		CMOS	GULL WING				SINGLE	SMALL OUTLINE			1.27 mm	70 Cel	CURRENT-MODE	0 Cel	MATTE TIN	DUAL	R-PDSO-G16	1		2.65 mm	7.5 mm	Not Qualified		5 V	4.5 V	e3	30	260		10.3 mm			5.5 V
MAX1772EEI	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	28	SSOP	RECTANGULAR	YES	400 kHz	PLASTIC/EPOXY			1		BICMOS	GULL WING	CONSTANT OFF TIME			BUCK	SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	1		1.73 mm	3.9 mm	Not Qualified		18 V	8 V	e0		245		9.89 mm			28 V
MAX1873SEEE	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	330 kHz	PLASTIC/EPOXY		.05 A	1		BICMOS	GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1		1.73 mm	3.9 mm	Not Qualified		18 V	6 V	e0				4.89 mm			28 V
MAX2003ACWE	Maxim Integrated	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	SOP	RECTANGULAR	YES	100 kHz	PLASTIC/EPOXY	2.2 mA		1		CMOS	GULL WING				SINGLE	SMALL OUTLINE			1.27 mm	70 Cel	CURRENT-MODE	0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1		2.65 mm	7.5 mm	Not Qualified		5 V	4.5 V	e0		245		10.3 mm			5.5 V
MAX1679EUA+	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1			GULL WING				SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	CURRENT-MODE	-40 Cel	Matte Tin (Sn)	DUAL	S-PDSO-G8	1		1.1 mm	3 mm	Not Qualified		10 V	5 V	e3	30	260		3 mm			22 V
MAX2003CSE	Maxim Integrated	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	SOP	RECTANGULAR	YES	100 kHz	PLASTIC/EPOXY	2.2 mA		1		CMOS	GULL WING				SINGLE	SMALL OUTLINE			1.27 mm	70 Cel	CURRENT-MODE	0 Cel	TIN LEAD	DUAL	R-PDSO-G16			1.75 mm	3.9 mm	Not Qualified		5 V	4.5 V	e0		245		9.9 mm			5.5 V
MAX1667EAP	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	20	SSOP	RECTANGULAR	YES	310 kHz	PLASTIC/EPOXY		4 A	1	1		GULL WING	PULSE WIDTH MODULATION	18 V		PUSH-PULL	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		.65 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20	1	28 V	1.99 mm	5.29 mm	Not Qualified	7.5 V	18 V	7.5 V	e0		245		7.2 mm	YES		28 V
MAX8713ETG-T	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	24	HVQCCN	SQUARE	YES	400 kHz	UNSPECIFIED			1	1	BICMOS	NO LEAD	CONSTANT OFF TIME	12 V		PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20		.5 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	QUAD	S-XQCC-N24	1	28 V	.8 mm	4 mm	Not Qualified	7.5 V	3.3 V	2.7 V	e0			+0.1V	4 mm	NO		5.5 V
MAX1926ETC-T	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	12	HVQCCN	SQUARE	YES	235 kHz	UNSPECIFIED		.1 A	1	1	BICMOS	NO LEAD		5 V	4	SINGLE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.16SQ,32	Power Management Circuits	.8 mm	85 Cel	CURRENT/VOLTAGE-MODE	-40 Cel	TIN LEAD	QUAD	S-XQCC-N12	1	12 V	.8 mm	4 mm	Not Qualified	4.25 V	5 V	4.5 V	e0		245	+4V	4 mm	YES		12 V
MAX17005BETP+	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	20	HVQCCN	SQUARE	YES	1200 kHz	UNSPECIFIED			1		BICMOS	NO LEAD	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	CURRENT-MODE	-40 Cel	MATTE TIN	QUAD	S-XQCC-N20	1		.8 mm	4 mm	Not Qualified		19 V	8 V	e3	30	260		4 mm		5.35 V	26 V
MAX8568AETE-T	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES		UNSPECIFIED		.9 A	1		BICMOS	NO LEAD	PULSE FREQUENCY MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	TIN LEAD	QUAD	S-XQCC-N16	1		.8 mm	3 mm	Not Qualified		3.6 V	2.8 V	e0				3 mm			5.5 V
MAX2003CPE	Maxim Integrated	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	DIP	RECTANGULAR	NO	100 kHz	PLASTIC/EPOXY	2.2 mA		1		CMOS	THROUGH-HOLE				SINGLE	IN-LINE			2.54 mm	70 Cel	CURRENT-MODE	0 Cel	TIN LEAD	DUAL	R-PDIP-T16			4.572 mm	7.62 mm	Not Qualified		5 V	4.5 V	e0		245		19.175 mm			5.5 V
MAX8568AETE	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES		UNSPECIFIED		.9 A	1		BICMOS	NO LEAD	PULSE FREQUENCY MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	TIN LEAD	QUAD	S-XQCC-N16	1		.8 mm	3 mm	Not Qualified		3.6 V	2.8 V	e0				3 mm			5.5 V
MAX17015AETP+	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	20	HVQCCN	SQUARE	YES	1200 kHz	UNSPECIFIED			1		BICMOS	NO LEAD	PULSE WIDTH MODULATION			PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	CURRENT-MODE	-40 Cel	MATTE TIN	QUAD	S-XQCC-N20	1		.8 mm	4 mm	Not Qualified		19 V	8 V	e3	30	260		4 mm		5.35 V	26 V
MAX1757EAI-T	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	28	SOP	RECTANGULAR	YES	330 kHz	PLASTIC/EPOXY			1			GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE			.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	1		1.99 mm	5.29 mm	Not Qualified		12 V	6 V	e0		245		10.2 mm			14 V
MAX1667EAP-T	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	20	SSOP	RECTANGULAR	YES	310 kHz	PLASTIC/EPOXY		4 A	1	1		GULL WING	PULSE WIDTH MODULATION	18 V		PUSH-PULL	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		.65 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20	1	28 V	1.99 mm	5.29 mm	Not Qualified	7.5 V	18 V	7.5 V	e0				7.2 mm	YES		28 V
MAX8568BETE	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES		UNSPECIFIED		.9 A	1		BICMOS	NO LEAD	PULSE FREQUENCY MODULATION			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	TIN LEAD	QUAD	S-XQCC-N16	1		.8 mm	3 mm	Not Qualified		3.6 V	2.8 V	e0				3 mm			5.5 V
MAX1679EUA	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	8	HTSSOP	SQUARE	YES		PLASTIC/EPOXY			1			GULL WING				SINGLE	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1		1.1 mm	3 mm	Not Qualified		10 V	5 V	e0				3 mm			22 V
MAX1736EUT42	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1			GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G6	1		1.45 mm	1.625 mm	Not Qualified		10 V	4.7 V	e0				2.9 mm			22 V
MAX2003CSE+	Maxim Integrated	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	SOP	RECTANGULAR	YES	100 kHz	PLASTIC/EPOXY	2.2 mA		1		CMOS	GULL WING				SINGLE	SMALL OUTLINE			1.27 mm	70 Cel	CURRENT-MODE	0 Cel	MATTE TIN	DUAL	R-PDSO-G16			1.75 mm	3.9 mm	Not Qualified		5 V	4.5 V	e3	30	260		9.9 mm			5.5 V
MAX1772EEI-T	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	28	SSOP	RECTANGULAR	YES	400 kHz	PLASTIC/EPOXY			1		BICMOS	GULL WING	CONSTANT OFF TIME			BUCK	SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	1		1.75 mm	3.89 mm	Not Qualified		18 V	8 V	e0		245		9.91 mm			28 V
MAX2003ACSE	Maxim Integrated	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	SOP	RECTANGULAR	YES	100 kHz	PLASTIC/EPOXY	2.2 mA		1		CMOS	GULL WING				SINGLE	SMALL OUTLINE			1.27 mm	70 Cel	CURRENT-MODE	0 Cel	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G16	1		1.75 mm	3.9 mm	Not Qualified		5 V	4.5 V	e0	20	240		9.9 mm			5.5 V
MAX1679EUA-T	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1			GULL WING				SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	CURRENT-MODE	-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1		1.1 mm	3 mm	Not Qualified		10 V	5 V	e0				3 mm			22 V
MAX2003AC/D	Maxim Integrated	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	DIE	RECTANGULAR	YES	100 kHz	UNSPECIFIED	2.2 mA		1		CMOS	NO LEAD				SINGLE	UNCASED CHIP				70 Cel	CURRENT-MODE	0 Cel	TIN LEAD	UPPER	R-XUUC-N16					Not Qualified		5 V	4.5 V	e0							5.5 V
MAX1737EEI	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	28	SSOP	RECTANGULAR	YES	340 kHz	PLASTIC/EPOXY	7 mA		1			GULL WING	PULSE WIDTH MODULATION		6/28	PUSH-PULL	SMALL OUTLINE, SHRINK PITCH	SSOP28,.25	Power Management Circuits	.635 mm	85 Cel	CURRENT/VOLTAGE-MODE	-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	1		1.75 mm	3.89 mm	Not Qualified		18 V	6 V	e0		245		9.91 mm			28 V
M62241FP	Renesas Electronics	BATTERY CHARGE CONTROLLER	COMMERCIAL EXTENDED	24	SSOP	RECTANGULAR	YES	3.91 kHz	PLASTIC/EPOXY			1			GULL WING				SINGLE	SMALL OUTLINE, SHRINK PITCH			.8 mm	75 Cel		-20 Cel		DUAL	R-PDSO-G24			2.1 mm	5.3 mm	Not Qualified		9 V						10.1 mm

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.