BATTERY CHARGE CONTROLLER Power Management ICs 271

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Control Mode	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold	Nominal Output Voltage	Maximum Input Voltage
LTC4006EGN-6	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA		1	1		GULL WING		20 V			SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		.635 mm	85 Cel		-40 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G16	1	28 V	1.75 mm	3.899 mm	Not Qualified	6 V				e0	20	235	+4.7V	4.8895 mm	YES
LTC4065LXEDC#TRMPBF	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	6	HVSON	SQUARE	YES		PLASTIC/EPOXY	.25 mA		1		CMOS	NO LEAD		5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.08,20		.5 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-N6	1	5.5 V	.8 mm	2 mm	Not Qualified	3.75 V		SEATED HT-CALCULATED		e3	30	260		2 mm	NO
LT3652HVEDD#TRPBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	12	HVSON	SQUARE	YES		PLASTIC/EPOXY	3.5 mA		1	1	BIPOLAR	NO LEAD		20 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC12,.12,18		.45 mm	125 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-N12	1	34 V	.8 mm	3 mm	Not Qualified	4.95 V				e3	30	260		3 mm
LT3652HVIDD#TRPBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	12	HVSON	SQUARE	YES		PLASTIC/EPOXY	3.5 mA		1	1	BIPOLAR	NO LEAD		20 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC12,.12,18		.45 mm	125 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-N12	1	34 V	.8 mm	3 mm	Not Qualified	4.95 V				e3	30	260		3 mm
LTC4006EGN-2#TRPBF	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA		1	1		GULL WING		20 V			SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		.635 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	28 V	1.75 mm	3.899 mm	Not Qualified	6 V				e3	30	260	+4.7V	4.8895 mm	YES
TPS65552ADGQG4	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	10	HTSSOP	SQUARE	YES		PLASTIC/EPOXY		3 A	1			GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel		-35 Cel		DUAL	S-PDSO-G10	2		1.1 mm	3 mm	Not Qualified		5 V		4.5 V		30	250		3 mm			5.5 V
TPS65552ADGQRG4	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	10	HTSSOP	SQUARE	YES		PLASTIC/EPOXY		3 A	1			GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel		-35 Cel		DUAL	S-PDSO-G10	2		1.1 mm	3 mm	Not Qualified		5 V		4.5 V		30	250		3 mm			5.5 V
TPS65552ARGTR	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	16	HQCCN	SQUARE	YES		PLASTIC/EPOXY		3 A	1			NO LEAD	PULSE WIDTH MODULATION			SINGLE	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	85 Cel		-35 Cel	MATTE TIN	QUAD	S-PQCC-N16	2		1 mm	3 mm	Not Qualified		5 V		4.5 V	e3	30	250		3 mm			5.5 V
TPS65552ARGTRE3	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY		3 A	1			NO LEAD	PULSE WIDTH MODULATION			SINGLE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-35 Cel	MATTE TIN	QUAD	S-PQCC-N16	2		1 mm	3 mm	Not Qualified		5 V		4.5 V	e3	30	250		3 mm			5.5 V
TPS65552ARGTT	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	16	HQCCN	SQUARE	YES		PLASTIC/EPOXY		3 A	1			NO LEAD	PULSE WIDTH MODULATION			SINGLE	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	85 Cel		-35 Cel		QUAD	S-PQCC-N16			1 mm	3 mm	Not Qualified		5 V		4.5 V					3 mm			5.5 V
LTC4000EGN-1#TRPBF	Analog Devices	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	28	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1		CMOS	GULL WING					SMALL OUTLINE, SHRINK PITCH	SSOP28,.25		.635 mm	125 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G28	1	60 V	1.75 mm	3.9 mm		3 V				e3	30	260		9.9 mm
LTC4123EDC#TRMPBF	Analog Devices	BATTERY CHARGE CONTROLLER	OTHER	6	HVSON	SQUARE	YES		PLASTIC/EPOXY	.2 mA		1		CMOS	NO LEAD					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.08,20		.5 mm	85 Cel		-20 Cel	MATTE TIN	DUAL	S-PDSO-N6		5 V	.8 mm	2 mm		2.2 V		SEATED HT-CALCULATED		e3				2 mm
MAX1925ETC	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	12	HVQCCN	SQUARE	YES	235 kHz	UNSPECIFIED		.1 A	1	1	BICMOS	NO LEAD		5 V	4	SINGLE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.16SQ,32	Power Management Circuits	.8 mm	85 Cel	CURRENT/VOLTAGE-MODE	-40 Cel	TIN LEAD	QUAD	S-XQCC-N12	1	6.1 V	.8 mm	4 mm	Not Qualified	4.5 V	5 V		4.5 V	e0		245	+4V	4 mm	YES		12 V
MAX1925ETC+	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	12	HVQCCN	SQUARE	YES	235 kHz	UNSPECIFIED		.1 A	1	1	BICMOS	NO LEAD		5 V		SINGLE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.16SQ,32		.8 mm	85 Cel	CURRENT/VOLTAGE-MODE	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N12	1	6.1 V	.8 mm	4 mm	Not Qualified	4.5 V	5 V		4.5 V	e3	30	260	+4V	4 mm	YES		12 V
MAX1879EUA-T	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1			GULL WING				SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1		1.1 mm	3 mm	Not Qualified		10 V		4.4 V	e0		245		3 mm			22 V
MAX1879EUA+T	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1		GULL WING		10 V		SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		.65 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8	1	22 V	1.1 mm	3 mm	Not Qualified	4.4 V	10 V	INPUT VOLTAGE IS SPECIFIED WITH EXTERNAL PMOS FET OFF	4.4 V	e3	30	260	+4V	3 mm	YES		22 V
MAX1737EEI-T	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	28	SSOP	RECTANGULAR	YES	340 kHz	PLASTIC/EPOXY	7 mA		1			GULL WING	PULSE WIDTH MODULATION		6/28	PUSH-PULL	SMALL OUTLINE, SHRINK PITCH	SSOP28,.25	Power Management Circuits	.635 mm	85 Cel	CURRENT/VOLTAGE-MODE	-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	1		1.73 mm	3.9 mm	Not Qualified		18 V		6 V	e0				9.89 mm			28 V
MAX1737EEI+T	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	28	SSOP	RECTANGULAR	YES	340 kHz	PLASTIC/EPOXY			1	4		GULL WING	PULSE WIDTH MODULATION	18 V		PUSH-PULL	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		.635 mm	85 Cel	CURRENT-MODE	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	28 V	1.73 mm	3.9 mm	Not Qualified	6 V	18 V		6 V	e3	30	260	+2.5V	9.89 mm	YES		28 V
MAX1879EUA	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1		GULL WING		10 V		SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	22 V	1.1 mm	3 mm	Not Qualified	4.4 V	10 V	INPUT VOLTAGE IS SPECIFIED WITH EXTERNAL PMOS FET OFF	4.4 V	e0		245	+4V	3 mm	YES		22 V
MAX1879EUA+	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1		GULL WING		10 V		SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		.65 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8	1	22 V	1.1 mm	3 mm	Not Qualified	4.4 V	10 V	INPUT VOLTAGE IS SPECIFIED WITH EXTERNAL PMOS FET OFF	4.4 V	e3	30	260	+4V	3 mm	YES		22 V
PQ25792RQMR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	29	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	3.3 mA		1	4		NO LEAD		5 V		BUCK-BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC29,.17SQ,16		.4 mm	85 Cel		-40 Cel		QUAD	S-PQCC-N29		24 V	1 mm	4 mm		3.6 V		OVERVOLTGAE RISING THRESHOLD=25.7V						4 mm	YES
PQ25731RSNT	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	32	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	5		NO LEAD					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.16SQ,16		.4 mm	85 Cel		-40 Cel		QUAD	S-PQCC-N32		26 V	.8 mm	4 mm		3.5 V								4 mm	YES
PQ25792RQMT	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	29	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	3.3 mA		1	4		NO LEAD		5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC29,.17SQ,16		.4 mm	85 Cel		-40 Cel		QUAD	S-PQCC-N29		24 V	1 mm	4 mm		3.6 V		OVERVOLTGAE RISING THRESHOLD=25.7V						4 mm	YES
LM3620M5X-8	Texas Instruments	BATTERY CHARGE CONTROLLER	COMMERCIAL	5	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1			GULL WING					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37		.953 mm	70 Cel		0 Cel		DUAL	R-PDSO-G5			1.19 mm	1.6 mm			5 V	OUTPUT VOLTAGE FOR COKE ANODE IS 8.4V; ADJUSTABLE MODE FROM 8.036 TO 8.364V	4 V					2.92 mm		8.2 V	30 V
BQ24100RHL	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	20	HQCCN	RECTANGULAR	YES	1100 kHz	PLASTIC/EPOXY		4.5 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	85 Cel	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N20			1 mm	3.5 mm	Not Qualified				4.35 V	e4				4.5 mm		4.2 V	16 V
TPS65560RGT	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY		1.78 A	1			NO LEAD	PULSE WIDTH MODULATION			SINGLE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-35 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16			1 mm	3 mm	Not Qualified		3 V		2.7 V	e4				3 mm			4 V
LM3621M-3.0	Texas Instruments	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1			GULL WING				BOOST	SMALL OUTLINE			1.27 mm	70 Cel	CURRENT/VOLTAGE-MODE	0 Cel		DUAL	R-PDSO-G16			1.75 mm	3.899 mm			4.2 V	ALSO AVAILABLE 4.2 OR 4.1V SELECTABLE OUTPUT VOLTAGE	3 V					9.902 mm			5.5 V
BQ2954SNN	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	200 kHz	PLASTIC/EPOXY			1			GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE				85 Cel	CURRENT/VOLTAGE-MODE	-40 Cel		DUAL	R-PDSO-G16					Not Qualified		5 V		4.5 V								5.5 V
LM3620M5-8	Texas Instruments	BATTERY CHARGE CONTROLLER	COMMERCIAL	5	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1			GULL WING					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37		.953 mm	70 Cel		0 Cel		DUAL	R-PDSO-G5			1.19 mm	1.6 mm			5 V	OUTPUT VOLTAGE FOR COKE ANODE IS 8.4V; ADJUSTABLE MODE FROM 8.036 TO 8.364V	4 V					2.92 mm		8.2 V	30 V
BQ2054SNTRG4	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	16	SOP	RECTANGULAR	YES	100 kHz	PLASTIC/EPOXY		.005 A	1			GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE			1.27 mm	70 Cel	CURRENT/VOLTAGE-MODE	-20 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1		1.78 mm	3.935 mm	Not Qualified		5 V		4.5 V	e4	30	260		9.97 mm			5.5 V
BQ2004HSNTRG4	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	16	SOP	RECTANGULAR	YES	300 kHz	PLASTIC/EPOXY			1		CMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE			1.27 mm	70 Cel	CURRENT-MODE	-20 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1		1.78 mm	3.935 mm	Not Qualified		5 V		4.5 V	e4	30	260		9.97 mm			5.5 V
BQ2954SNG4	Texas Instruments	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	SOP	RECTANGULAR	YES	200 kHz	PLASTIC/EPOXY			1			GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE			1.27 mm	70 Cel	CURRENT/VOLTAGE-MODE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1		1.78 mm	3.935 mm	Not Qualified		5 V		4.5 V	e4	30	260		9.97 mm			5.5 V
BQ24115RHLT	Texas Instruments	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	20	HVQCCN	RECTANGULAR	YES	1100 kHz	PLASTIC/EPOXY		4.5 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	VOLTAGE-MODE	-40 Cel		QUAD	R-PQCC-N20			1 mm	3.5 mm	Not Qualified				4.35 V					4.5 mm			16 V
TPS65562RGTTG4	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY		3 A	1			NO LEAD	PULSE WIDTH MODULATION			SINGLE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-35 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16	2		1 mm	3 mm	Not Qualified		3 V		2.7 V	e4	30	260		3 mm			4 V
BQ24730RGFRG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	40	HVQCCN	RECTANGULAR	YES	345 kHz	PLASTIC/EPOXY		.0045 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N40	3		1 mm	5 mm	Not Qualified		16.8 V	ALSO OPERATE IN VOLTAGE ADJUSTABLE MODE FROM 12.6 TO 16.8	8 V	e4	30	260		7 mm			24 V
TPS65561RGT	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY		3 A	1			NO LEAD	PULSE WIDTH MODULATION			SINGLE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	70 Cel		-35 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16			1 mm	3 mm	Not Qualified		3 V		2.7 V	e4				3 mm			4 V
LM3620M5-4	Texas Instruments	BATTERY CHARGE CONTROLLER	COMMERCIAL	5	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1			GULL WING					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37		.953 mm	70 Cel		0 Cel		DUAL	R-PDSO-G5			1.19 mm	1.6 mm			5 V	OUTPUT VOLTAGE FOR COKE ANODE IS 4.2V; ADJUSTABLE OUTPUT MODE FROM 4.018 TO 4.182V	4 V					2.92 mm		4.1 V	30 V
BQ24100RHLT	Texas Instruments	BATTERY CHARGE CONTROLLER	AUTOMOTIVE	20	HVQCCN	RECTANGULAR	YES	1100 kHz	PLASTIC/EPOXY		4.5 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	VOLTAGE-MODE	-40 Cel		QUAD	R-PQCC-N20			1 mm	3.5 mm	Not Qualified				4.35 V		NOT SPECIFIED	NOT SPECIFIED		4.5 mm		4.2 V	16 V
BQ2954PNN	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	DIP	RECTANGULAR	NO	200 kHz	PLASTIC/EPOXY			1			THROUGH-HOLE	PULSE WIDTH MODULATION			SINGLE	IN-LINE				85 Cel	CURRENT/VOLTAGE-MODE	-40 Cel		DUAL	R-PDIP-T16					Not Qualified		5 V		4.5 V								5.5 V
TPS65561RGTRG4	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY		3 A	1			NO LEAD	PULSE WIDTH MODULATION			SINGLE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	70 Cel		-35 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16	2		1 mm	3 mm	Not Qualified		3 V		2.7 V	e4	30	260		3 mm			4 V
BQ24730RGFTG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	40	HVQCCN	RECTANGULAR	YES	345 kHz	PLASTIC/EPOXY		.0045 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N40	3		1 mm	5 mm	Not Qualified		16.8 V	ALSO OPERATE IN VOLTAGE ADJUSTABLE MODE FROM 12.6 TO 16.8	8 V	e4	30	260		7 mm			24 V
BQ24730RGFR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	40	HVQCCN	RECTANGULAR	YES	345 kHz	PLASTIC/EPOXY		.0045 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N40	3		1 mm	5 mm	Not Qualified		16.8 V	ALSO OPERATE IN VOLTAGE ADJUSTABLE MODE FROM 12.6 TO 16.8	8 V	e4	30	260		7 mm			24 V
BQ24109RHLRG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	20	HQCCN	RECTANGULAR	YES	1100 kHz	PLASTIC/EPOXY		4.5 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	85 Cel	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N20	2		1 mm	3.5 mm	Not Qualified				4.35 V	e4	30	260		4.5 mm		4.2 V	16 V
BQ2954PNE4	Texas Instruments	BATTERY CHARGE CONTROLLER	COMMERCIAL	16	DIP	RECTANGULAR	NO	200 kHz	PLASTIC/EPOXY			1			THROUGH-HOLE	PULSE WIDTH MODULATION			SINGLE	IN-LINE			2.54 mm	70 Cel	CURRENT/VOLTAGE-MODE	0 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16			4.57 mm	7.62 mm	Not Qualified		5 V		4.5 V	e4				19.18 mm			5.5 V
BQ24115RHLRG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	20	HQCCN	RECTANGULAR	YES	1100 kHz	PLASTIC/EPOXY		4.5 A	1			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG			.5 mm	85 Cel	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N20	2		1 mm	3.5 mm	Not Qualified				4.35 V	e4	30	260		4.5 mm		4.2 V	16 V
BQ2031SN	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	16	SOP	RECTANGULAR	YES	100 kHz	PLASTIC/EPOXY		.005 A	1			GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE			1.27 mm	70 Cel	CURRENT/VOLTAGE-MODE	-20 Cel		DUAL	R-PDSO-G16			1.78 mm	3.935 mm	Not Qualified		5 V		4.5 V		NOT SPECIFIED	NOT SPECIFIED		9.97 mm			5.5 V
TPS65560RGTTG4	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY		1.78 A	1			NO LEAD	PULSE WIDTH MODULATION			SINGLE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-35 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16	2		1 mm	3 mm	Not Qualified		3 V		2.7 V	e4	30	260		3 mm			4 V
TPS65562RGTRG4	Texas Instruments	BATTERY CHARGE CONTROLLER	OTHER	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY		3 A	1			NO LEAD	PULSE WIDTH MODULATION			SINGLE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-35 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16	2		1 mm	3 mm	Not Qualified		3 V		2.7 V	e4	30	260		3 mm			4 V

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.