INDUSTRIAL Power Management ICs 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold
TPS2115ADRBT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	SQUARE	YES		PLASTIC/EPOXY	.09 mA		1	2			NO LEAD	2.8 V	1.8/5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	Power Management Circuits	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N8	2	5.5 V	1 mm	3 mm	Not Qualified	1.5 V	CAN SWITCH A VOLTAGE AS LOW AS 1.5V AS LONG AS THERE IS A MIN OF 2.8V AT ONE OF THE I/P POWER PINS	e4	30		260		3 mm	YES
TPS25921LDR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SON	RECTANGULAR	YES		PLASTIC/EPOXY	.58 mA	1.6 A	1	1			NO LEAD	12 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-N8	1	18 V	1.75 mm	3.9 mm		4.5 V		e4	30		260	+1.39V	4.9 mm	YES
ZXCT1022E5TA	Diodes Incorporated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			GULL WING	15 V	15		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G5	1	20 V	1.45 mm	1.55 mm	Not Qualified	2.5 V		e3	30		260		2.9 mm	YES
STM6822TWY6F	STMicroelectronics	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.012 mA		1	1			GULL WING		1/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 3.08V; MANUAL RESET INPUT	e4	30		260	+3.08V	2.9 mm	NO
TPS2400DBVT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	1 mA	500 A	1	1			GULL WING	5 V	3.1/6.8		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G5	2	6.8 V	1.45 mm	1.6 mm	Not Qualified	3.1 V		e4	NOT SPECIFIED		260		2.9 mm	NO
TPS3838E18DBVR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	CMOS		GULL WING	1.8 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G5	1	6 V	1.45 mm	1.6 mm	Not Qualified	1.6 V	RESET THRESHOLD VOLTAGE IS 1.71V	e4	NOT SPECIFIED		260		2.9 mm	NO
DS1232LPN	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	DIP	RECTANGULAR	NO		PLASTIC/EPOXY	.5 mA		1	1	CMOS		THROUGH-HOLE	5 V	5		IN-LINE	DIP8,.3	Power Management Circuits	2.54 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	R-PDIP-T8	1	5.5 V	4.572 mm	7.62 mm	Not Qualified	4.5 V	PUSHBUTTON RESET OPTION	e0	20		240	+4.37/4.62V	9.375 mm	NO
DS1232LPN+	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	DIP	RECTANGULAR	NO		PLASTIC/EPOXY	.5 mA		1	1	CMOS		THROUGH-HOLE	5 V	5		IN-LINE	DIP8,.3	Power Management Circuits	2.54 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDIP-T8	1	5.5 V	4.572 mm	7.62 mm	Not Qualified	4.5 V	PUSHBUTTON RESET OPTION	e3	30		260	+4.37/4.62V	9.375 mm	NO
MCP73833T-AMI/MF	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	VSON	SQUARE	YES		PLASTIC/EPOXY	3 mA		1	1		TS 16949	NO LEAD	5.2 V	3.8/5.5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	S-PDSO-N10	1	6 V	1 mm	3 mm	Not Qualified	3.75 V		e3			260		3 mm	YES
MCP73837T-NVI/MF	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	HVSON	SQUARE	YES		PLASTIC/EPOXY	3 mA		1	1		TS 16949	NO LEAD	5.35 V	5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	S-PDSO-N10	1	6 V	1 mm	3 mm	Not Qualified	4.65 V		e3			260	+4.35V	3 mm	YES
BQ25570RGRR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	20	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD			BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N20	1	5.1 V	1 mm	3.5 mm		.6 V		e4	30		260		3.5 mm	YES
TPS75003RHLT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	20	HVQCCN	RECTANGULAR	YES	300 kHz	PLASTIC/EPOXY	.15 mA	3 A	1	3			NO LEAD	3 V	2.5/6		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20/24,.14X.18,20	Power Management Circuits	.5 mm	85 Cel	1 V		-40 Cel	NICKEL PALLADIUM GOLD	6.25 V	QUAD	R-PQCC-N20	1	6.5 V	1 mm	3.5 mm	Not Qualified	2.2 V		e4	30	3	260		4.5 mm	YES
UCC29002DR/1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	3.5 mA	2.5 A	1	1	BICMOS		GULL WING	12 V	12	BUCK-BOOST	SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	105 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	13.5 V	1.75 mm	3.9 mm	Not Qualified	4.375 V		e4	30		260		4.9 mm	YES
LTC6811IG-2#TRPBF	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	48	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	12	CMOS		GULL WING	40 V			SMALL OUTLINE, SHRINK PITCH	SSOP48,.3,20		.5 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G48	1	55 V	2 mm	5.3 mm		11 V		e3			260		12.8 mm
MCP73213-A6SI/MF	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	HVSON	SQUARE	YES		PLASTIC/EPOXY	1.5 mA		1	2		TS 16949	NO LEAD	9.4 V	4/16		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	S-PDSO-N10	1	16 V	1 mm	3 mm	Not Qualified	4 V		e3	40		260		3 mm	YES
MMPF0100F0ANES	NXP Semiconductors	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	56	HVQCCN	SQUARE	YES		UNSPECIFIED			1	14	MOS		NO LEAD	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	105 Cel			-40 Cel	TIN		QUAD	S-XQCC-N56	3	4.5 V	.9 mm	8 mm		2.8 V		e3	40		260		8 mm	YES
TPS2041BDGNRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HTSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1			GULL WING	3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	2.7 V	UNDERVOLTAGE LOCKOUT	e4	30		260		3 mm	NO
TPS22960DCNR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0012 mA		1	2			GULL WING	3.3 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	1.62 V		e4	30		260		3 mm	NO
BD5355G-TR	ROHM	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	CMOS		GULL WING	1.2 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		.95 mm	105 Cel			-40 Cel			DUAL	R-PDSO-G5			1.25 mm	1.6 mm	Not Qualified		DETECTION THRESHOLD VOLTAGE IS 5.5V		NOT SPECIFIED		NOT SPECIFIED	+5.5V	2.9 mm	NO
BQ25672RQMR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	29	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	3300 mA		1	1			NO LEAD	15 V		BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC29,.16SQ,16		.4 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N29	2	24 V	1 mm	4 mm		6 V		e4	30		260	+26V	4 mm	YES
MAX4372FEUK-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.06 mA		1	1	BICMOS		GULL WING	12 V	2.7/28		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	R-PDSO-G5	1	28 V	1.45 mm	1.625 mm	Not Qualified	2.7 V		e0					2.9 mm	NO
MAX4372FEUK+T	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.06 mA		1	1	BICMOS		GULL WING	12 V	2.7/28		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G5	1	28 V	1.45 mm	1.625 mm	Not Qualified	2.7 V		e3	30		260		2.9 mm	NO
MCP73863-I/ML	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	4 mA		1	1			NO LEAD		4.5/12		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Power Management Circuits	.65 mm	85 Cel			-40 Cel	MATTE TIN		QUAD	S-PQCC-N16	1	12 V	1 mm	4 mm	Not Qualified	4.5 V		e3					4 mm	NO
NCP803SN293T1G	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0025 mA		1	1			GULL WING	3.3 V	1.2/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.95 mm	105 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G3	1	5.5 V	1.11 mm	1.3 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 2.93V	e3	40		260	+2.93V	2.9 mm	NO
NCP803SN308T1G	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.0025 mA		1	1			GULL WING	3.3 V	1.5/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.95 mm	105 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G3	1	5.5 V	1.11 mm	1.3 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 3.08V	e3	40		260	+3.08V	2.9 mm	NO
TPS3838E18DBVRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	CMOS		GULL WING	1.8 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G5	1	6 V	1.45 mm	1.6 mm	Not Qualified	1.6 V	RESET THRESHOLD VOLTAGE IS 1.71V	e4	NOT SPECIFIED		260		2.9 mm	NO
TPS65910AA1RSL	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	48	HVQCCN	SQUARE	YES	3000 kHz	PLASTIC/EPOXY		1.5 A	1	1			NO LEAD	3.6 V	3.6		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	Power Management Circuits	.4 mm	85 Cel	.6 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	3.3 V	QUAD	S-PQCC-N48	3	5.5 V	1 mm	6 mm	Not Qualified	1.7 V		e4	NOT SPECIFIED	12	260		6 mm	YES
BQ24075RGTTG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	1.5 mA		1	1			NO LEAD	5 V	4.5/6.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N16	2	26 V	1 mm	3 mm	Not Qualified	4.35 V		e4	30		260	+6.6V	3 mm	YES
BQ40Z50RSMT-R2	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	32	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	4			NO LEAD	14.4 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N32	2	26 V	1 mm	4 mm		2.2 V		e4	30		260		4 mm	YES
LTC2955IDDB-1#TRPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	CMOS		NO LEAD	7 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-N10	1	36 V	.8 mm	2 mm		1.5 V		e3	30		260		3 mm	YES
MC32PF3000A7EP	NXP Semiconductors	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	48	HVQCCN	SQUARE	YES		UNSPECIFIED			1	12	MOS		NO LEAD	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	TIN		QUAD	S-XQCC-N48	3	4.5 V	.9 mm	7 mm		2.8 V	ALSO OPERATES WITH 3.7V TO 5.5V; ALSO OPERATES WITH COIN CELL VOLTAGE OF 1.8 TO 4.5V	e3	40		260		7 mm	YES
ADM705ARZ-REEL7	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.25 mA		1	1			GULL WING	5 V	5		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	1 V	RESET THRESHOLD VOLTAGE IS 4.65V; MANUAL RESET INPUT	e3	30		260	+4.65V	4.9 mm	NO
MIC94042YFL-TR	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	VSON	SQUARE	YES		PLASTIC/EPOXY			1	1			NO LEAD	1.8 V			SMALL OUTLINE, VERY THIN PROFILE	SOLCC4,.047,25		.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N4	1	5.5 V	.8 mm	1.2 mm		1.7 V					260		1.2 mm	NO
UCC29002D	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	3.5 mA	2.5 A	1	1	BICMOS		GULL WING	12 V	12	BUCK-BOOST	SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	105 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	13.5 V	1.75 mm	3.9 mm	Not Qualified	4.375 V		e4	30		260		4.9 mm	YES
LTC2912IDDB-2#TRMPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY			1	1			NO LEAD	3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-N8	1	6 V	.8 mm	2 mm	Not Qualified	2.3 V		e3	30		260		3 mm	YES
TL7700CPS	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	1 mA		1	1	BIPOLAR		GULL WING	3 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	40 V	2 mm	5.3 mm	Not Qualified	1.8 V		e4	30		260	+0.5V	6.2 mm	YES
TPS3106K33DBVT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.027 mA		1	1	CMOS		GULL WING	3.3 V	0.4/3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G6	1	3.6 V	1.45 mm	1.6 mm	Not Qualified	.9 V	RESET THRESHOLD VOLTAGE IS 2.941V; POWER ON RESET GENERATOR	e4	30		260	+2.941V	2.9 mm	NO
MCP73831T-2DCI/MC	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY	1.5 mA		1	1		TS 16949	NO LEAD	5.2 V	3.3/5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	Matte Tin (Sn)		DUAL	R-PDSO-N8	1	6 V	1 mm	2 mm	Not Qualified	3.75 V		e3	40		260	+4.20V	3 mm	YES
MIC2090-1YM5-TR	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.11 mA		1	1			GULL WING	5 V			SMALL OUTLINE, LOW PROFILE	TSOP5/6,.11,37		.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm		1.8 V		e4			260		2.9 mm	NO
TPS3809L30DBVR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1			GULL WING	3 V	2/6		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.95 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G3	1	6 V	1.45 mm	1.6 mm	Not Qualified	2 V	RESET THRESHOLD VOLTAGE IS 2.64V	e4	NOT SPECIFIED		260	+2.64V	2.9 mm	NO
UCC29002DR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	3.5 mA	2.5 A	1	1	BICMOS		GULL WING	12 V	12	BUCK-BOOST	SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	105 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	13.5 V	1.75 mm	3.9 mm	Not Qualified	4.375 V		e4	30		260		4.9 mm	YES
TPS2557DRBT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	SQUARE	YES		PLASTIC/EPOXY	.12 mA		1	1			NO LEAD	5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	S-PDSO-N8	2	6.5 V	1 mm	3 mm	Not Qualified	2.5 V		e4	NOT SPECIFIED		260		3 mm	YES
TPS3813K33DBVR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1			GULL WING	3.3 V	2/6		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G6	1	6 V	1.45 mm	1.6 mm	Not Qualified	2 V	DETECTION THRESHOLD VOLTAGE IS 2.93V; POWER ON RESET GENERATOR	e4	30		260	+2.93V	2.9 mm	NO
LTC4151IMS-1#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1	CMOS		GULL WING	48 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	S-PDSO-G10	1	80 V	1.1 mm	3 mm	Not Qualified	7 V		e3	30		260		3 mm	NO
MCP73812T-420I/OT	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	1.5 mA		1	1		TS 16949	GULL WING	5.2 V	5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G5	1	6 V	1.45 mm	1.55 mm	Not Qualified	3.75 V		e3			260	+4.2V	2.9 mm	YES
TPS65910A31A1RSLT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	48	HVQCCN	SQUARE	YES	3000 kHz	PLASTIC/EPOXY		1.5 A	1	1			NO LEAD	3.6 V	3.6		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	Power Management Circuits	.4 mm	85 Cel	.6 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	3.3 V	QUAD	S-PQCC-N48	3	5.5 V	1 mm	6 mm	Not Qualified	2.7 V		e4	NOT SPECIFIED	12	260		6 mm	YES
LTC2912ITS8-2#TRMPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	CMOS		GULL WING	3.3 V			SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G8	1	6 V	1 mm	1.625 mm	Not Qualified	2.3 V		e3	30		260		2.9 mm	YES
LTC4367IMS8-1#TRPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1			GULL WING	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	S-PDSO-G8		60 V	1.1 mm	3 mm		2.5 V		e3					3 mm	YES

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.