INDUSTRIAL Power Management ICs 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Control Mode	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold
MC32PF3000A7EPR2	NXP Semiconductors	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	48	HVQCCN	SQUARE	YES	UNSPECIFIED			1	12	MOS		NO LEAD	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	TIN	QUAD	S-XQCC-N48	3	4.5 V	.9 mm	7 mm		2.8 V	ALSO OPERATES WITH 3.7V TO 5.5V; ALSO OPERATES WITH COIN CELL VOLTAGE OF 1.8 TO 4.5V	e3	40	260		7 mm	YES
MMPF0100F6ANES	NXP Semiconductors	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	56	HVQCCN	SQUARE	YES	UNSPECIFIED			1	14	MOS		NO LEAD	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	105 Cel		-40 Cel	MATTE TIN	QUAD	S-XQCC-N56	3	4.5 V	.9 mm	8 mm		2.8 V		e3	40	260		8 mm	YES
TPS2375PWR-1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.35 mA		1	1			GULL WING	48 V	48		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	57 V	1.2 mm	3 mm	Not Qualified	0 V		e4	30	260		4.4 mm	NO
TPS3705-33DGNRG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.05 mA		1	1	CMOS		GULL WING	3.3 V	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	6 V	1.07 mm	3 mm	Not Qualified	2 V	RESET THRESHOLD VOLTAGE IS 2.93V; POWER ON RESET GENERATOR; MANUAL RESET INPUT	e4	30	260	+2.93V	3 mm	NO
DS1708TEUA	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.06 mA		1	1	CMOS		GULL WING	3.3 V	1.5/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	1.2 V	PUSHBUTTON RESET OPTION	e0		245	+3.08V	3 mm	NO
DS1708TEUA+	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY			1	1			GULL WING	3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	1.2 V	PUSHBUTTON RESET OPTION	e3	30	260		3 mm	NO
LTC2990IMS#TRPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY			1	1	CMOS		GULL WING	3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G10	1	5.5 V	1.1 mm	3 mm	Not Qualified	2.9 V		e3	30	260		3 mm	NO
LTC4380IDD-4#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	HVSON	SQUARE	YES	PLASTIC/EPOXY	.035 mA		1	1	CMOS		NO LEAD	12 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20		.5 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	S-PDSO-N10		80 V	.8 mm	3 mm		4 V	SEATED HT-CALCULATED	e3				3 mm	YES
TPS2111APWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.09 mA		1	2			GULL WING	2.8 V	1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	5.5 V	1.2 mm	3 mm	Not Qualified	1.5 V	CAN SWITCH A VOLTAGE AS LOW AS 1.5V AS LONG AS THERE IS A MIN OF 2.8V AT ONE OF THE I/P POWER PINS	e4	30	260		4.4 mm	YES
UCC29002DGK	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	3.5 mA	2.5 A	1	1	BICMOS		GULL WING	12 V	12	BUCK-BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	105 Cel	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD SILVER	DUAL	S-PDSO-G8	2	13.5 V	1.1 mm	3 mm	Not Qualified	4.375 V		e4	30	260		3 mm	YES
LTC2912IDDB-1#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	RECTANGULAR	YES	PLASTIC/EPOXY			1	1	CMOS		NO LEAD	3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-N8	1	6 V	.8 mm	2 mm	Not Qualified	2.3 V		e3	30	260		3 mm	YES
MC33161DMR2	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.9 mA		1	2	BIPOLAR		GULL WING	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	105 Cel		-40 Cel	Tin/Lead (Sn80Pb20)	DUAL	S-PDSO-G8		40 V	1.1 mm	3 mm	Not Qualified	2 V	MINIMUM SUPPLY NEEDED FOR NEGATIVE SENSING IS 4V	e0	30	235		3 mm	NO
PCA9450BHNY	NXP Semiconductors	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	56	HVQCCN	SQUARE	YES	UNSPECIFIED			1	11			NO LEAD	3.8 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC56,.27SQ,16		.4 mm	105 Cel		-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N56	3	5.5 V	1 mm	7 mm		2.7 V		e4	30	260		7 mm	YES
S-8261ABJMD-G3JT2G	Ablic	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1	CMOS		GULL WING	1.8 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G6		8 V	1.35 mm	1.6 mm	Not Qualified	1.5 V	DETECTION THRESHOLD VOLTAGE IS 4.28V		NOT SPECIFIED	NOT SPECIFIED	+4.28V	2.9 mm	NO
TPS2115APW	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.09 mA		1	2			GULL WING	2.8 V	1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	5.5 V	1.2 mm	3 mm	Not Qualified	1.5 V	CAN SWITCH A VOLTAGE AS LOW AS 1.5V AS LONG AS THERE IS A MIN OF 2.8V AT ONE OF THE I/P POWER PINS	e4	30	260		4.4 mm	YES
TPS3820-33DBVT	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.025 mA		1	1			GULL WING	3.3 V	1.1/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	1.1 V	RESET THRESHOLD VOLTAGE IS 2.93V	e4	NOT SPECIFIED	260	+2.93V	2.9 mm	NO
CAT811TTBI-GT3	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	LSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.015 mA		1	1			GULL WING	3.3 V	3.3		SMALL OUTLINE, LOW PROFILE	TO-253	Power Management Circuits	1.92 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G4	1	5.5 V	1.22 mm	1.3 mm	Not Qualified	1.2 V	RESET THRESHOLD VOLTAGE IS 3.08V; MANUAL RESET INPUT	e4	30	260	+3.08V	2.9 mm	NO
DS1232SN	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA		1	1	CMOS		GULL WING	5 V	5		SMALL OUTLINE	SOP16,.4	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	4.5 V	PUSHBUTTON RESET OPTION	e0	20	240	+4.37/4.62V	10.3 mm	NO
DS1232SN+	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	2 mA		1	1	CMOS		GULL WING	5 V	5		SMALL OUTLINE	SOP16,.4	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	4.5 V	PUSHBUTTON RESET OPTION	e3	30	260		10.3 mm	NO
DS1816R-10T&R	Dallas Semiconductor	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3		RECTANGULAR	YES	PLASTIC/EPOXY	.035 mA		1	1			GULL WING	3.3 V			SMALL OUTLINE				85 Cel		-40 Cel		DUAL	R-PDSO-G3		5.5 V			Not Qualified	0 V							NO
DS1816R-10/T&R	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.035 mA		1	1	CMOS		GULL WING	3.3 V	1.2/5.5		SMALL OUTLINE, THIN PROFILE	TO-236	Power Management Circuits	.95 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G3	1	5.5 V	1.12 mm	1.3 mm	Not Qualified	0 V		e0			+2.88V	2.92 mm	NO
DS1816R-10+T&R	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.035 mA		1	1	CMOS		GULL WING	3.3 V	1.2/5.5		SMALL OUTLINE, THIN PROFILE	TO-236	Power Management Circuits	.95 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G3	1	5.5 V	1.12 mm	1.3 mm	Not Qualified	0 V		e3	30	260	+2.88V	2.92 mm	NO
ISPPAC-POWR605-01SN24I	Lattice Semiconductor	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	24	HVQCCN	SQUARE	YES	UNSPECIFIED	5 mA		1	6	CMOS		NO LEAD	3.3 V	3/3.6		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	MATTE TIN	QUAD	S-XQCC-N24	3	3.96 V	1 mm	4 mm	Not Qualified	2.64 V		e3	30	260		4 mm	YES
LM3704XCMM-308/NOPB	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.05 mA		1	2	CMOS		GULL WING	1.2 V	1/5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	1	5.5 V	1.09 mm	3 mm	Not Qualified	1 V		e3	30	260	+3.08V	3 mm	NO
LTC4151IMS#TRPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	TSSOP	SQUARE	YES	PLASTIC/EPOXY			1	1	CMOS		GULL WING	48 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	S-PDSO-G10	1	80 V	1.1 mm	3 mm	Not Qualified	7 V		e3	30	260		3 mm	NO
MIC2009A-2YM6	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1			GULL WING	5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.6 mm		2.5 V		e4				2.9 mm	YES
TPS3307-33DGNR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HTSSOP	SQUARE	YES	PLASTIC/EPOXY	.04 mA		1	3			GULL WING	3.3 V	2/6		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	6 V	1.07 mm	3 mm	Not Qualified	2 V	RESET THRESHOLD VOLTAGE IS 4.55V; MANUAL RESET INPUT; POWER-ON RESET GENERATOR	e4	30	260	+1.25,2.93,4.55V	3 mm	YES
TPS3705-33DGN	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES	PLASTIC/EPOXY	.05 mA		1	1	CMOS		GULL WING	3.3 V	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	6 V	1.07 mm	3 mm	Not Qualified	2 V	RESET THRESHOLD VOLTAGE IS 2.93V; POWER ON RESET GENERATOR; MANUAL RESET INPUT	e4	NOT SPECIFIED	260	+2.93V	3 mm	NO
BQ24620RVAT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	5 mA		1	1			NO LEAD	20 V	5/28	BUCK	CHIP CARRIER	LCC16,.14SQ,20	Power Management Circuits	.5 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16	2	28 V	1 mm	3.5 mm	Not Qualified	5 V		e4	30	260	+3.85V	3.5 mm	NO
BQ40Z50RSMT-R1	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	32	HVQCCN	SQUARE	YES	PLASTIC/EPOXY			1	1			NO LEAD	14.4 V	2.2/26		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.16SQ,16	Power Management Circuits	.4 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32	2	26 V	1 mm	4 mm	Not Qualified	2.2 V		e4	30	260		4 mm	YES
FUSB301TMX	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY			1	1			NO LEAD	3.3 V			CHIP CARRIER, VERY THIN PROFILE			.4 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD SILVER	QUAD	R-PQCC-N10	1	5.5 V	.4 mm	1.2 mm		2.8 V		e4	30	260		1.6 mm	NO
FUSB303TMX	Onsemi	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	12	VQCCN	SQUARE	YES	PLASTIC/EPOXY			1	1			NO LEAD	3.3 V			CHIP CARRIER, VERY THIN PROFILE			.4 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD SILVER	QUAD	S-PQCC-N12	1	5.5 V	.4 mm	1.6 mm		2.85 V		e4	30	260		1.6 mm	NO
LTC2937IUHE#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY			1	6	CMOS		NO LEAD	12 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel	MATTE TIN	QUAD	R-PQCC-N28		16.5 V	.8 mm	5 mm		4.5 V	THRESHOLD VOLTAGE= 1.2V	e3			+1.2V	6 mm	YES
LTC2991IMS#TRPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1	CMOS		GULL WING	3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	5.5 V	1.1 mm	3 mm	Not Qualified	2.9 V		e3	30	260		4.039 mm	NO
MCP73811T-420I/OT	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	1.5 mA		1	1		TS 16949	GULL WING	5.2 V	5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G5	1	6 V	1.45 mm	1.55 mm	Not Qualified	3.75 V		e3		260	+4.2V	2.9 mm	NO
MIC2007YM6-TR	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.3 mA		1	1			GULL WING	5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		.95 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	2.5 V		e4		260		2.9 mm	YES
MIC2009YM6	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1			GULL WING	5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel		-40 Cel	MATTE TIN	DUAL	R-PDSO-G6	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	2.5 V		e3				2.9 mm	YES
BD5357FVE-TR	ROHM	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	VSOF	RECTANGULAR	YES	PLASTIC/EPOXY			1	1	CMOS		FLAT	1.2 V			SMALL OUTLINE, VERY THIN PROFILE	TSSOP5/6,.06,20		.5 mm	105 Cel		-40 Cel		DUAL	R-PDSO-F5			.6 mm	1.2 mm	Not Qualified		DETECTION THRESHOLD VOLTAGE IS 5.7V		NOT SPECIFIED	NOT SPECIFIED	+5.7V	1.6 mm	NO
DS2438Z/T&R	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1 mA		1	1			GULL WING		2.7/10		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	10 V	1.75 mm	3.9 mm	Not Qualified	2.4 V		e0				4.9 mm	NO
DS2438Z+T&R	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	1 mA		1	1			GULL WING		2.7/10		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	10 V	1.75 mm	3.9 mm	Not Qualified	2.4 V		e3	30	260		4.9 mm	NO
ISL94202IRTZ	Renesas Electronics	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	48	HVQCCN	SQUARE	YES	PLASTIC/EPOXY			1	2			NO LEAD	26.4 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel		-40 Cel	MATTE TIN	QUAD	S-PQCC-N48	1	36 V	.8 mm	6 mm		4 V		e3	30	260		6 mm	YES
MMPF0200F0AEP	NXP Semiconductors	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	56	HVQCCN	SQUARE	YES	UNSPECIFIED			1	12	MOS		NO LEAD	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel		QUAD	S-XQCC-N56	3	4.5 V	.9 mm	8 mm		2.8 V			40	260		8 mm	YES
STC3117IJT	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	9	VFBGA	RECTANGULAR	YES	PLASTIC/EPOXY			1	1			BALL	3.6 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel		-40 Cel		BOTTOM	R-PBGA-B9		4.5 V	.705 mm	1.46 mm		2.7 V			NOT SPECIFIED	NOT SPECIFIED		1.564 mm	YES
TPS3828-50DBVT	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.025 mA		1	1			GULL WING	3.3 V	1.1/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	1.1 V	RESET THRESHOLD VOLTAGE IS 4.55V	e4	NOT SPECIFIED	260	+4.55V	2.9 mm	NO
IRPS5401MXI04TRPAUMA1	Infineon Technologies	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	56	HVQCCN	SQUARE	YES	UNSPECIFIED	45 mA		1	5			NO LEAD	5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC56,.27SQ,16		.4 mm	85 Cel		-40 Cel		QUAD	S-XQCC-N56		14 V	1 mm	7 mm		1.2 V						7 mm	YES
MAX705ESA-T	Maxim Integrated	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.5 mA		1	2	CMOS		GULL WING	5 V	5		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	1.2 V		e0		245		4.9 mm	YES
MAX705ESA+T	Analog Devices	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.5 mA		1	2	CMOS		GULL WING	5 V	5		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel		-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	1.2 V		e3	30	260		4.9 mm	YES
TPS2400DBVRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	PLASTIC/EPOXY			1	1			GULL WING	5 V	3.1/6.8		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	2	6.8 V	1.45 mm	1.6 mm	Not Qualified	3.1 V		e4	30	260		2.9 mm	NO

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.