INDUSTRIAL Power Management ICs 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	No. of Channels	Technology	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Nominal Threshold Voltage (V)	Length	Adjustable Threshold	Maximum Input Voltage
MAX1926ETC+	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	12	HVQCCN	SQUARE	YES	235 kHz	UNSPECIFIED		.1 A	1	1	BICMOS	NO LEAD		5 V		SINGLE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC12,.16SQ,32		.8 mm	85 Cel		CURRENT/VOLTAGE-MODE	-40 Cel	Matte Tin (Sn) - annealed		QUAD	S-XQCC-N12	1	12 V	.8 mm	4 mm	Not Qualified	4.25 V	5 V		4.5 V	e3	30		260	+4V	4 mm	YES	12 V
MAX3355EEUD	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	BICMOS	GULL WING		3 V	3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Power Management Circuits	.65 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	2.6 V				e0					5 mm	NO
MAX3355EEUD+	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	BICMOS	GULL WING		3 V	3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Power Management Circuits	.65 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G14	1	5.5 V	1.1 mm	4.4 mm	Not Qualified	2.6 V				e3	30		260		5 mm	NO
ADM811TARTZ-REEL7	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4	LSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.01 mA		1	1	CMOS	GULL WING		3.3 V	3.3		SMALL OUTLINE, LOW PROFILE	TO-253LOW	Power Management Circuits	1.92 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G4	1	5.5 V	1.22 mm	1.3 mm	Not Qualified	1 V		RESET THRESHOLD VOLTAGE IS 3.08V; BUILT-IN MANUAL RESET		e3	30		260	+3.08V	2.9 mm	NO
TPS3813K33DBVT	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1		GULL WING		3.3 V	2/6		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G6	1	6 V	1.45 mm	1.6 mm	Not Qualified	2 V		DETECTION THRESHOLD VOLTAGE IS 2.93V; POWER ON RESET GENERATOR		e4	30		260	+2.93V	2.9 mm	NO
BQ24297RGET	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	24	HVQCCN	SQUARE	YES		PLASTIC/EPOXY	3000 mA		1	1		NO LEAD		5 V	3.9/6.2	BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N24	2	6.2 V	1 mm	4 mm	Not Qualified	3.9 V				e4	NOT SPECIFIED		260	+6.4V	4 mm	YES
LTC2954IDDB-2#TRMPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	CMOS	NO LEAD					SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-N8	1	26.4 V	.8 mm	2 mm	Not Qualified	2.7 V				e3	30		260		3 mm	YES
MAX1873REEE-T	Maxim Integrated	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	330 kHz	PLASTIC/EPOXY		.05 A	1		BICMOS	GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel			-40 Cel	TIN LEAD		DUAL	R-PDSO-G16	1		1.75 mm	3.9 mm	Not Qualified		18 V		6 V	e0					4.89 mm		28 V
MAX1873REEE+T	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES	330 kHz	PLASTIC/EPOXY		.05 A	1	2	BICMOS	GULL WING	PULSE WIDTH MODULATION	18 V		SINGLE	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		.635 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G16	1	28 V	1.75 mm	3.9 mm	Not Qualified	6 V	18 V		6 V	e3	30		260		4.89 mm	YES	28 V
TPS2066DGNR-1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HTSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1		GULL WING		3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	1	5.5 V	1.07 mm	3 mm	Not Qualified	2.7 V				e4	30		260	+2.4V	3 mm	NO
TPS2550DBVT	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.15 mA		1	1		GULL WING		3.3 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		.95 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G6	1	6.5 V	1.45 mm	1.6 mm	Not Qualified	2.5 V				e4	30		260		2.9 mm	YES
BQ24133RGYR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	24	HVQCCN	RECTANGULAR	YES	1840 kHz	PLASTIC/EPOXY	5 mA	2.5 A	1	1		NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	R-PQCC-N24	2	17 V	1 mm	3.5 mm	Not Qualified	4.5 V			4.5 V	e4	NOT SPECIFIED		260	+3.6V	5.5 mm	YES	17 V
BQ29707DSET	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	VSON	SQUARE	YES		PLASTIC/EPOXY			1	1		NO LEAD		3.6 V			SMALL OUTLINE, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N6	1	8 V	.8 mm	1.5 mm		1.5 V		Battery over-voltage protection(Min/Max)(V) : 3.85 and 4.6		e4	30		260		1.5 mm	NO
LTC4370IDE#TRPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	CMOS	NO LEAD		12 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.45 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-N16	1	18 V	.8 mm	3 mm		2.9 V				e3	30		260		4 mm	YES
M4Z32-BR00SH1	STMicroelectronics	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	4					PLASTIC/EPOXY											MICROELECTRONIC ASSEMBLY	MODULE,4LEAD(UNSPEC)	Power Management Circuits		85 Cel			-40 Cel	GOLD								Not Qualified					e4
MAX6372KA-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	BICMOS	GULL WING		3 V	3/5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Analog Waveform Generation Functions	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8		5.5 V	1.45 mm	1.625 mm	Not Qualified	2.5 V				e4					2.9 mm	NO
MAX6372KA+T	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	BICMOS	GULL WING		3 V	3/5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Analog Waveform Generation Functions	.65 mm	125 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	5.5 V	1.45 mm	1.625 mm	Not Qualified	2.5 V				e4	30		260		2.9 mm	NO
MCP73831T-4ADI/OT	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	1.5 mA		1	1		GULL WING		5.4 V	3.3/5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G5	1	6 V	1.45 mm	1.6 mm	Not Qualified	3.75 V				e3			260	+4.4V	2.9 mm	YES
MIC2026A-2YM	Microchip Technology	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.16 mA		1	2		GULL WING		5 V			SMALL OUTLINE	SOP8,.25		1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	5.5 V	1.73 mm	3.94 mm		2.7 V					30		260	2.45	4.93 mm	NO
TPS65218B1PHPR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	48	HTFQFP	SQUARE	YES		PLASTIC/EPOXY			1	1		GULL WING		2.4 V			FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH			.5 mm	105 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQFP-G48	3	3.3 V	1.2 mm	7 mm		2.2 V				e4	30		260		7 mm	YES
AP2331SA-7	Diodes Incorporated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1		GULL WING		5 V			SMALL OUTLINE			.915 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G3	1	5.2 V	1.2 mm	1.3 mm		2.7 V				e3	30		260		2.9 mm	NO
LTC1326IS8#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			3	3	CMOS	GULL WING		5 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G8	1	7 V	1.752 mm	3.899 mm	Not Qualified	1 V		RESET THRESHOLD VOLTAGE IS 4.725; MANUAL PUSH-BUTTON RESET INPUT		e3	30		260	+4.725V	4.9025 mm	NO
TPS2051BDRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.07 mA		1	1		GULL WING		3.3 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	5.5 V	1.75 mm	3.9 mm	Not Qualified	2.7 V		UNDERVOLTAGE LOCKOUT		e4	NOT SPECIFIED		260		4.9 mm	NO
TPS3707-33DGNR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.05 mA		1	1	CMOS	GULL WING		3.3 V	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	S-PDSO-G8	1	6 V	1.07 mm	3 mm	Not Qualified	2 V		RESET THRESHOLD VOLTAGE IS 2.93V; POWER ON RESET GENERATOR; MANUAL RESET INPUT		e4	NOT SPECIFIED		260	+2.93V	3 mm	NO
BQ40Z80RSMR	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	32	HVQCCN	SQUARE	YES		PLASTIC/EPOXY			1	7		NO LEAD		21.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N32	1	32 V	1 mm	4 mm		2.2 V				e4	30		260		4 mm	YES
MAX8725ETI	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	HVQCCN	SQUARE	YES		UNSPECIFIED	6 mA		1	2	BICMOS	NO LEAD		18 V	8/28		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	TIN LEAD		QUAD	S-XQCC-N28	1	28 V	.8 mm	5 mm	Not Qualified	8 V				e0					5 mm	YES
MAX8725ETI+	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	28	HVQCCN	SQUARE	YES		UNSPECIFIED	6 mA		1	2	BICMOS	NO LEAD		18 V	8/28		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.2SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		QUAD	S-XQCC-N28	1	28 V	.8 mm	5 mm	Not Qualified	8 V				e3	30		260		5 mm	YES
BQ7791501PWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	24	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.08 mA		1	1		GULL WING		20 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G24	2	25 V	1.2 mm	4.4 mm		3 V		Battery over-voltage protection(Min/Max)(V) : 3 and 4.575		e4	30		260		7.8 mm	YES
LTC2909ITS8-3.3#TRMPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	VSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			3	2	CMOS	GULL WING		3.3 V			SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G8	1		1 mm	1.625 mm	Not Qualified	.5 V				e3			260		2.9 mm	YES
TPS3620-33DGKRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	SQUARE	YES		PLASTIC/EPOXY	.04 mA		1	1	CMOS	GULL WING		3.3 V	1.8/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Power Management Circuits	.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	1	5.5 V	1.1 mm	3 mm	Not Qualified	1.65 V		MANUAL RESET; POWER ON RESET GENERATOR; VOLTAGE MONITOR FOR POWER-FAIL OR LOW-BATTERY MONITORING		e4	30		260		3 mm	NO
TPS3809I50DBVRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	3	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1		GULL WING		5 V	2/6		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TO-236	Power Management Circuits	.95 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G3	1	6 V	1.45 mm	1.6 mm	Not Qualified	2 V		RESET THRESHOLD VOLTAGE IS 4.55V		e4	NOT SPECIFIED		260	+4.55V	2.9 mm	NO
TPS3820-33DBVRG4	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.025 mA		1	1	CMOS	GULL WING		3.3 V	1.1/5.5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Power Management Circuits	.95 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G5	1	5.5 V	1.45 mm	1.6 mm	Not Qualified	1.1 V		RESET THRESHOLD VOLTAGE IS 2.93V		e4	NOT SPECIFIED		260	+2.93V	2.9 mm	NO
TPS75003RHLRG4	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	20	HVQCCN	RECTANGULAR	YES	300 kHz	PLASTIC/EPOXY	.15 mA	3 A	1	3		NO LEAD		3 V	3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20/24,.14X.18,20	Power Management Circuits	.5 mm	85 Cel	1 V		-40 Cel	NICKEL PALLADIUM GOLD	6.25 V	QUAD	R-PQCC-N20	1	6.5 V	1 mm	3.5 mm	Not Qualified	2.2 V				e4	30	3	260		4.5 mm	YES
UC2903DWTR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	18	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	15 mA		1	4	BIPOLAR	GULL WING		15 V			SMALL OUTLINE	SOP18,.4	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G18	2	40 V	2.65 mm	7.5 mm	Not Qualified	8 V				e4	30		260	1.8	11.55 mm	YES
BQ20Z655DBTR-R1	Texas Instruments	POWER SUPPLY MANAGEMENT CIRCUIT	INDUSTRIAL	44	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1		GULL WING		14 V	4.5/25		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP44,.25,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G44	2	25 V	1.2 mm	4.4 mm	Not Qualified	4.5 V				e4	30		260		11.15 mm	NO
BQ24210DQCR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	10	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY	1.2 mA		1	1		NO LEAD		5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-N10	2	7 V	.8 mm	2 mm	Not Qualified	3.5 V				e4	30		260	+3.3V	3 mm	YES
LTC2912IDDB-2#TRPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	CMOS	NO LEAD		3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-N8	1	6 V	.8 mm	2 mm	Not Qualified	2.3 V				e3	30		260		3 mm	YES
LTC4006EGN-4#PBF	Analog Devices	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	SSOP	RECTANGULAR	YES		PLASTIC/EPOXY	5 mA		1	1		GULL WING		20 V			SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		.635 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G16	1	28 V	1.75 mm	3.899 mm	Not Qualified	6 V				e3	30		260	+4.7V	4.8895 mm	YES
LTC4353IDE#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY			1	2	CMOS	NO LEAD		12 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.45 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-N16	1	18 V	.8 mm	3 mm		2.9 V				e3	30		260		4 mm	NO
MMPF0100F9AZES	NXP Semiconductors	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	56	HVQCCN	SQUARE	YES		UNSPECIFIED			1	14	MOS	NO LEAD		3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	105 Cel			-40 Cel			QUAD	S-XQCC-N56	3	4.5 V	.9 mm	8 mm		2.8 V					40		260		8 mm	YES
TLC7701IPWR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY	.016 mA		1	1	BICMOS	GULL WING		2.7 V	2/6		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Power Management Circuits	.65 mm	85 Cel			-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		DUAL	R-PDSO-G8	1	6 V	1.2 mm	3 mm	Not Qualified	2 V		POWER-ON RESET GENERATOR		e4	NOT SPECIFIED		260	+1.1V	4.4 mm	NO
TPS2065DGNR-1	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	HTSSOP	SQUARE	YES		PLASTIC/EPOXY			1	1		GULL WING		3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD SILVER		DUAL	S-PDSO-G8	1	5.5 V	1.07 mm	3 mm	Not Qualified	2.7 V				e4	30		260	+2.4V	3 mm	NO
TPS3307-33DR	Texas Instruments	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	SOP	RECTANGULAR	YES		PLASTIC/EPOXY	.04 mA		1	3	CMOS	GULL WING		3.3 V	2/6		SMALL OUTLINE	SOP8,.25	Power Management Circuits	1.27 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1	6 V	1.75 mm	3.9 mm	Not Qualified	2 V		RESET THRESHOLD VOLTAGE IS 4.55V; MANUAL RESET INPUT; POWER-ON RESET GENERATOR		e4	30		260	+1.25,2.93,4.55V	4.9 mm	YES
ISPPAC-POWR1014-01TN48I	Lattice Semiconductor	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	48	LFQFP	SQUARE	YES		PLASTIC/EPOXY			1	10	CMOS	GULL WING		3.3 V	2.5/5,3/3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Power Management Circuits	.5 mm	85 Cel			-40 Cel	MATTE TIN		QUAD	S-PQFP-G48	3	3.96 V	1.6 mm	7 mm	Not Qualified	2.8 V				e3	30		260		7 mm	YES
LTC4151IS-2#PBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	CMOS	GULL WING		48 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G16	1	80 V	1.752 mm	3.899 mm	Not Qualified	7 V				e3	30		260		9.906 mm	NO
LTC4359IDCB#TRPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	6	HVSON	RECTANGULAR	YES		PLASTIC/EPOXY	.2 mA		1	1	CMOS	NO LEAD		12 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.12,20		.5 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-N6	1	80 V	.8 mm	2 mm		4 V				e3	30		260	+1.2V	3 mm	NO
LTC4364IMS-2#TRPBF	Analog Devices	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	CMOS	GULL WING		12 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.5 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G16	1	80 V	1.1 mm	3 mm		4 V		RESET THRESHOLD VOLTAGE IS 2.2 VOLT		e3	30		260	+2.2V	4.039 mm	YES
MAX6373KA-T	Maxim Integrated	POWER SUPPLY SUPPORT CIRCUIT	INDUSTRIAL	8	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	1	BICMOS	GULL WING		3 V	3/5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1	Analog Waveform Generation Functions	.65 mm	125 Cel			-40 Cel	TIN LEAD		DUAL	R-PDSO-G8	1	5.5 V	1.45 mm	1.625 mm	Not Qualified	2.5 V				e0					2.9 mm	NO

Power Management ICs

Power Management ICs (PMICs) are electronic components that are used to regulate and manage the power supply in electronic systems. They are used to optimize power usage, reduce power consumption, and increase battery life in portable devices.

PMICs typically include a range of components such as voltage regulators, power switches, and battery management circuits. Voltage regulators are used to maintain a stable voltage output despite fluctuations in the input voltage or load. Power switches are used to control the flow of power in a circuit, and battery management circuits are used to monitor and manage the charging and discharging of batteries.

PMICs are used in a wide range of applications, including mobile phones, laptops, tablets, and other portable devices. They are also used in automotive electronics, power supplies, and industrial automation systems. PMICs play a critical role in managing power consumption in electronic systems, reducing energy waste and extending battery life.

One of the key advantages of PMICs is their ability to provide multiple functions in a single package, reducing the number of components needed in a system and simplifying design. They also help to improve system reliability by protecting against overvoltage, overcurrent, and overtemperature conditions.