INDUSTRIAL Switching Regulators & Controllers 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	Technology	Screening Level	Nominal Bandwidth	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Height	Width (mm)	Qualification	Minimum Supply Voltage (Vsup)	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Length	Nominal Output Voltage	Maximum Input Voltage
MAX1744EUB/V+	Analog Devices	SWITCHING CONTROLLER	INDUSTRIAL	10	TSSOP	SQUARE	YES	330 kHz	PLASTIC/EPOXY			1	BICMOS			GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Switching Regulator or Controllers	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL GOLD PALLADIUM		DUAL	S-PDSO-G10	1		1.1 mm		3 mm	Not Qualified		5.5 V	ALSO OPERATES AT 5V	4.5 V		30		260	3 mm	3.3 V	36 V
MAX1744EUB/V+T	Analog Devices		INDUSTRIAL	10	TSSOP	RECTANGULAR	YES	330 kHz	PLASTIC/EPOXY				BICMOS			GULL WING					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Switching Regulator or Controllers	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL GOLD PALLADIUM		DUAL	R-PDSO-G10	1					Not Qualified						30		260
MAX77231EZL+	Analog Devices	SWITCHING REGULATOR	INDUSTRIAL	9	VFBGA	SQUARE	YES		PLASTIC/EPOXY		.3 A	1	BICMOS			BALL	PULSE FREQUENCY MODULATION			BOOST	GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel			-40 Cel			BOTTOM	S-PBGA-B9			.35 mm		1.238 mm			3.7 V	OUTPUT IS FACTORY TRIMMABLE FROM 11.2V TO 16.2V	2.75 V		NOT SPECIFIED		NOT SPECIFIED	1.238 mm	11.7 V	4.8 V
MAX8614BETD+T	Analog Devices		INDUSTRIAL	14	SON	RECTANGULAR	YES		PLASTIC/EPOXY				BICMOS			NO LEAD					SMALL OUTLINE	SOLCC14,.12,16	Other Analog ICs	.4 mm	85 Cel	-10 V		-40 Cel	Matte Tin (Sn) - annealed	24 V	DUAL	R-PDSO-N14	1					Not Qualified				2.7 V	e3	30		260			5.5 V
MAX8655ETN+	Analog Devices	SWITCHING REGULATOR	INDUSTRIAL	56	HVQCCN	SQUARE	YES	1200 kHz	UNSPECIFIED		25 A	1	BICMOS			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC56,.31SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel		CURRENT-MODE	-40 Cel	Matte Tin (Sn) - annealed		QUAD	S-XQCC-N56	3		.8 mm		8 mm	Not Qualified		12 V	ALSO OUTPUT VOLTAGE ADJUSTABLE 0.7 TO 5.5V	4.5 V	e3	30		260	8 mm	6.5 V	25 V
MCP1642B-50I/MC	Microchip Technology	SWITCHING REGULATOR	INDUSTRIAL	8	HVSON	RECTANGULAR	YES	1150 kHz	PLASTIC/EPOXY		.8 A	1		TS 16949		NO LEAD	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20		.5 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	R-PDSO-N8	1		1 mm		2 mm					2.5 V	e3	40		260	3 mm	5 V	4.2 V
MCP1642D-50I/MS	Microchip Technology	SWITCHING REGULATOR	INDUSTRIAL	8	TSSOP	SQUARE	YES	1150 kHz	PLASTIC/EPOXY		.8 A	1		TS 16949		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		.65 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	S-PDSO-G8			1.1 mm		3 mm					2.5 V	e3				3 mm	5 V	4.2 V
MIC2182-3.3YM	Microchip Technology	SWITCHING CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	330 kHz	PLASTIC/EPOXY		20 A	1	BICMOS			GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE	SOP16,.25		1.27 mm	85 Cel	3.201 V	CURRENT-MODE	-40 Cel	MATTE TIN	3.399 V	DUAL	R-PDSO-G16	1		1.895 mm		3.9 mm	Not Qualified		15 V		4.5 V	e3	40		260	9.9 mm	3.3 V	32 V
NCP1406SNT1	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	5	TSSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		1.5 A	1				GULL WING	PULSE FREQUENCY MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	Switching Regulator or Controllers	.95 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G5			1.1 mm		1.5 mm	Not Qualified		3 V	ALSO OPERATES IN ADJUSTABLE VOLTAGE AS LOW AS 25V	1.4 V	e0			235	3 mm		5.5 V
NCP3231AMNTXG	Onsemi	SWITCHING CONTROLLER	INDUSTRIAL	40	HVQCCN	SQUARE	YES	500 kHz	UNSPECIFIED		25 A	1				NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	Switching Regulator or Controllers	.5 mm	90 Cel		VOLTAGE-MODE	-40 Cel	MATTE TIN		QUAD	S-XQCC-N40	3		1 mm		6 mm	Not Qualified		12 V		4.5 V	e3	30		260	6 mm		18 V
NCP6324CMTAATBG	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	8	HVSON	SQUARE	YES	3300 kHz	PLASTIC/EPOXY		2 A	1				NO LEAD	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	Switching Regulator or Controllers	.5 mm	85 Cel	.6 V	VOLTAGE-MODE	-40 Cel	MATTE TIN	5.5 V	DUAL	S-PDSO-N8	1		.8 mm		2 mm	Not Qualified		3.6 V	ALSO OPERATES IN PFM CONTROL TECHNIQUE	2.5 V	e3	30		260	2 mm	1.8 V	5.5 V
NCV6354BMTAATBG	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	8	HVSON	SQUARE	YES	3300 kHz	PLASTIC/EPOXY		3.3 A	1				NO LEAD	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	Switching Regulator or Controllers	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	MATTE TIN		DUAL	S-PDSO-N8	1		.8 mm		2 mm	Not Qualified		3.6 V	OUTPUT VOLTAGE RANGE FROM 0.6 V TO 5.5 V, ALSO OPERATES IN PFM CONTROL TECHNIQUE	2.3 V	e3	30		260	2 mm	1.8 V	5.5 V
TC962EOE	Microchip Technology		INDUSTRIAL	16	SOP	RECTANGULAR	YES		PLASTIC/EPOXY		.08 A		CMOS			GULL WING					SMALL OUTLINE	SOP16,.4	Other Analog ICs	1.27 mm	85 Cel			-40 Cel	Tin/Lead (Sn/Pb)		DUAL	R-PDSO-G16						Not Qualified				3 V	e0					-20 V	18 V
TL2844BD-8	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY	30 mA	1 A	1	BIPOLAR			GULL WING	PULSE WIDTH MODULATION	15 V		BUCK-BOOST	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel	4.95 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.05 V	DUAL	R-PDSO-G8	1	30 V	1.75 mm		3.9 mm	Not Qualified		15 V		12 V	e4	30		260	4.9 mm	5 V	30 V
TL594IDR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	300 kHz	PLASTIC/EPOXY	18 mA	.25 A	1	BIPOLAR			GULL WING	PULSE WIDTH MODULATION	15 V		BOOST	SMALL OUTLINE	SOP16,.25	Switching Regulator or Controllers	1.27 mm	85 Cel	4.95 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.05 V	DUAL	R-PDSO-G16	1	40 V	1.75 mm		3.9 mm	Not Qualified	7 V	15 V		7 V	e4	30		260	9.9 mm	5 V	40 V
TL594IPWRE4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	300 kHz	PLASTIC/EPOXY		.25 A	1	BIPOLAR			GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	1		1.2 mm		4.4 mm	Not Qualified		15 V		7 V	e4	30		260	5 mm		40 V
TL594IPWRG4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	300 kHz	PLASTIC/EPOXY	18 mA	.25 A	1	BIPOLAR			GULL WING	PULSE WIDTH MODULATION	15 V		BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	4.95 V	VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.05 V	DUAL	R-PDSO-G16	1	40 V	1.2 mm		4.4 mm	Not Qualified	7 V	15 V		7 V	e4	30		260	5 mm	5 V	40 V
TLV62150RGTT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	16	HVQCCN	SQUARE	YES	2500 kHz	PLASTIC/EPOXY		1 A	1				NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel	.9 V	CURRENT/VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD	5.25 V	QUAD	S-PQCC-N16	2		1 mm		3 mm	Not Qualified		12 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.9 TO 5V	4 V	e4	30	1	260	3 mm		17 V
TPS23752PWPR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	20	HTSSOP	RECTANGULAR	YES	276 kHz	PLASTIC/EPOXY	.85 mA	1.2 A	1			4.4 kHz	GULL WING	PULSE WIDTH MODULATION	48 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G20	2		1.2 mm		4.4 mm	Not Qualified		10.9 V		9.2 V	e4	30		260	6.5 mm		57 V
TPS54625PWPR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	14	HTSSOP	RECTANGULAR	YES	650 kHz	PLASTIC/EPOXY		6.5 A	1				GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Switching Regulator or Controllers	.65 mm	85 Cel	.76 V	VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	DUAL	R-PDSO-G14	2		1.2 mm		4.4 mm	Not Qualified		12 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76 TO 5.5V	4.5 V	e4	30	1	260	5 mm		18 V
TPS61080DRCTG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	HVSON	SQUARE	YES	1200 kHz	PLASTIC/EPOXY		.5 A	1				NO LEAD	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	2.7 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD	27 V	DUAL	R-PDSO-N10	2		1 mm		3 mm	Not Qualified		3.6 V		2.5 V	e4	30	1	260	3 mm		6 V
TPS62004DGSRG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	TSSOP	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		1.6 A	1	MOS			GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Switching Regulator or Controllers	.5 mm	85 Cel	1.5 V	CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD SILVER	1.5 V	DUAL	S-PDSO-G10	1		1.1 mm		3 mm	Not Qualified		3.6 V	PFM CONTROL TECHNIQUE IS ALSO POSSIBLE	2 V	e4	30	1	260	3 mm	1.5 V	5.5 V
TPS62134CRGTR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	16	HVQCCN	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		3.2 A	1				NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	.8 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	1.05 V	QUAD	S-PQCC-N16	2		1 mm		3 mm			12 V	SELECTABLE FIXED OUTPUT VOLTAGE IS 0.7 TO 1.05V	3 V	e4	NOT SPECIFIED	1	260	3 mm		17 V
TPS62402DRC	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	10	HVSON	SQUARE	YES	2500 kHz	PLASTIC/EPOXY		.6 A	1				NO LEAD	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N10			1 mm		3 mm	Not Qualified		3.6 V	ALSO HAS PFM CONTROL TECHNIQUE; ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 6V	2.5 V	e4				3 mm		6 V
TPS62402DRCR	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	10	HVSON	SQUARE	YES	2500 kHz	PLASTIC/EPOXY		.4 A	1				NO LEAD	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	1.2 V	VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	1.8 V	DUAL	S-PDSO-N10	2		1 mm		3 mm	Not Qualified		3.6 V	ALSO HAS PFM CONTROL TECHNIQUE; ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 6V	2.5 V	e4	NOT SPECIFIED	2	260	3 mm	3.3 V	6 V
TPS62402DRCRG4	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	10	HVSON	SQUARE	YES	2500 kHz	PLASTIC/EPOXY		.6 A	1				NO LEAD	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel	1.2 V	VOLTAGE-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	1.8 V	DUAL	S-PDSO-N10	2		1 mm		3 mm	Not Qualified		3.6 V	ALSO HAS PFM CONTROL TECHNIQUE; ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 6V	2.5 V	e4	NOT SPECIFIED	2	260	3 mm		6 V
TPS650001RTET	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	16	HVQCCN	SQUARE	YES	2847 kHz	PLASTIC/EPOXY		.6 A	1				NO LEAD	PULSE WIDTH MODULATION	3.6 V	3.6	BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Power Management Circuits	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N16	2		.8 mm		3 mm	Not Qualified		3.6 V	ALSO OPERATES AS LDO REGULATOR AT 1.8V, 2.8V; PFM CONTROL TECHNIQUE	2.3 V	e4	30	3	260	3 mm	1.2 V	6 V
TPS65124RGTTG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	16	HVQCCN	SQUARE	YES	4000 kHz	PLASTIC/EPOXY	.17 mA	.2 A	1				NO LEAD	PULSE WIDTH MODULATION	3.6 V	3.6	SINGLE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Power Management Circuits	.5 mm	85 Cel		CURRENT-MODE	-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N16	2		1 mm		3 mm	Not Qualified		3.6 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 3V TO 5.6V	2.7 V	e4	30		260	3 mm		5.5 V
TPS65266RHBT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	32	HVQCCN	SQUARE	YES	2400 kHz	PLASTIC/EPOXY		3 A	1				NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	.6 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	QUAD	S-PQCC-N32	2		1 mm		5 mm			5 V	PEAK CURRENT LIMIT 3.7A FOR OUTPUT 2 AND 3	2.7 V	e4	30	3	260	5 mm		6.5 V
TPS826951SIPR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	8	VBGA	RECTANGULAR	YES	3300 kHz	PLASTIC/EPOXY		.8 A	1				BALL	PULSE WIDTH MODULATION			BUCK	GRID ARRAY, VERY THIN PROFILE			1 mm	85 Cel	2.5 V	VOLTAGE-MODE	-40 Cel	TIN SILVER COPPER	2.5 V	BOTTOM	R-PBGA-B8	2		1 mm		2.3 mm			3.6 V	ALSO OPERATES IN PFM CONTROL TECHNIQUE	2.3 V	e1	30	1	260	2.9 mm	2.5 V	4.8 V
UC2842AD8TR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY	25 mA	1 A	1	BIPOLAR			GULL WING	PULSE WIDTH MODULATION	11 V		BUCK-BOOST	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel	4.95 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.05 V	DUAL	R-PDSO-G8	1	28 V	1.75 mm		3.9 mm	Not Qualified	16 V	15 V		11 V	e4	NOT SPECIFIED		260	4.9 mm	5 V	25 V
UC2844AN	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	DIP	RECTANGULAR	NO	500 kHz	PLASTIC/EPOXY	25 mA	1 A	1	BIPOLAR			THROUGH-HOLE	PULSE WIDTH MODULATION	11 V		BUCK-BOOST	IN-LINE	DIP8,.3	Switching Regulator or Controllers	2.54 mm	85 Cel	4.95 V	CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.05 V	DUAL	R-PDIP-T8		28 V	5.08 mm		7.62 mm	Not Qualified	16 V	15 V		11 V	e4	NOT SPECIFIED		NOT SPECIFIED	9.81 mm	5 V	25 V
UCC25701PWTR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		1.2 A	1	BICMOS			GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Switching Regulator or Controllers	.65 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G14	2		1.2 mm		4.4 mm	Not Qualified		11 V		10 V	e4	30		260	5 mm		13 V
UCC2801PWTR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		1 A	1	BICMOS			GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE	-40 Cel			DUAL	R-PDSO-G8			1.2 mm		3 mm	Not Qualified		10 V		8.2 V		NOT SPECIFIED		NOT SPECIFIED	4.4 mm		12 V
V7803-1000-SMT-TR	Cui	SWITCHING REGULATOR	INDUSTRIAL	6		RECTANGULAR	YES		PLASTIC/EPOXY		1 A	1	HYBRID			GULL WING					MICROELECTRONIC ASSEMBLY			2.54 mm	85 Cel	1.8 V		-40 Cel		5.5 V	DUAL	R-PDMA-G6			7.5 mm	7.5 mm	8.3 mm			12 V		5 V					15.24 mm	3.3 V	18 V
AP5724FDCG-7	Diodes Incorporated	SWITCHING REGULATOR	INDUSTRIAL	6	HVSON	SQUARE	YES	1400 kHz	PLASTIC/EPOXY			1				NO LEAD	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N6	1		.63 mm		2 mm	Not Qualified		3.6 V		2.7 V	e4	30		260	2 mm		5.5 V
AP5724WUG-7	Diodes Incorporated	SWITCHING REGULATOR	INDUSTRIAL	6	VSSOP	RECTANGULAR	YES	1400 kHz	PLASTIC/EPOXY			1				GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH			.95 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G6	1		1 mm		1.6 mm	Not Qualified		3.6 V		2.7 V	e3	30		260	2.9 mm		5.5 V
AP6015-33M10G-13	Diodes Incorporated	SWITCHING REGULATOR	INDUSTRIAL	10	TSSOP	SQUARE	YES	1200 kHz	PLASTIC/EPOXY		1.6 A	1				GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Switching Regulator or Controllers	.5 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	S-PDSO-G10	3		1.1 mm		3 mm	Not Qualified		3.6 V		2 V	e3			260	3 mm	3.3 V	5.5 V
BM2SC121FP2-LBZE2	ROHM	SWITCHING CONTROLLER	INDUSTRIAL	7	TO-263	RECTANGULAR	YES		PLASTIC/EPOXY	1.3 mA		1				GULL WING	PULSE FREQUENCY MODULATION				SMALL OUTLINE, HEAT SINK/SLUG	SMSIP7H,.55,50TB		1.27 mm	105 Cel			-40 Cel			SINGLE	R-PSSO-G7			4.81 mm		9.08 mm			24 V		15 V					10.18 mm		27.5 V
BM2SCQ123T-LBZ	ROHM	SWITCHING REGULATOR	INDUSTRIAL	6		RECTANGULAR	NO		UNSPECIFIED			1				THROUGH-HOLE	PULSE FREQUENCY MODULATION				FLANGE MOUNT				105 Cel			-40 Cel			SINGLE	R-XSFM-T6								24 V	ASLO OPERATES IN RESONANT CONTROL MODE	15 V		NOT SPECIFIED		NOT SPECIFIED			27.5 V
BQ25010RHLR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	20	HVQCCN	RECTANGULAR	YES	1500 kHz	PLASTIC/EPOXY		1.5 A	1				NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM GOLD		QUAD	R-PQCC-N20	3	6.5 V	1 mm		3.5 mm	Not Qualified	4.5 V		PFM MODE IS ALSO AVAILABLE	4.5 V	e4	30		260	4.5 mm		6.5 V
EN5365QI-T	Intel		INDUSTRIAL	58	QCCN	RECTANGULAR	YES	5000 kHz	PLASTIC/EPOXY		6 A					NO LEAD					CHIP CARRIER	LCC58,.39X.47,25	Switching Regulator or Controllers	.635 mm	85 Cel		VOLTAGE-MODE	-40 Cel			QUAD	R-PQCC-N58						Not Qualified
EP5352QI	Intel	SWITCHING REGULATOR	INDUSTRIAL	20	QCCN	RECTANGULAR	YES	4000 kHz	UNSPECIFIED		.5 A	1				NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER	LCC20,.16X.2,25	Switching Regulator or Controllers	.65 mm	85 Cel		VOLTAGE-MODE	-40 Cel	Matte Tin (Sn) - annealed		QUAD	R-XQCC-N20	3		1.15 mm		4 mm	Not Qualified		3.6 V	ALSO OPERATES AT 1.8V, 2.5V, 2.7V, 2.8V, 3V, 3.3V AND ALSO IN ADJUSTABLE MODE FROM 0.6V TO 5.05	2.4 V	e3	30		260	5 mm	1.2 V	5.5 V
FAN21SV04EMPX	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	25	HVQCCN	RECTANGULAR	YES	660 kHz	UNSPECIFIED		7.5 A	1	BICMOS			NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.65 mm	85 Cel		CURRENT-MODE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	R-XQCC-N25	1		.8 mm		5 mm	Not Qualified		12 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 19.2V	3 V	e4	30		260	6 mm	5 V	24 V
ISL80020IRZ-T	Renesas Electronics	SWITCHING REGULATOR	INDUSTRIAL	8	HVSON	SQUARE	YES	1200 kHz	PLASTIC/EPOXY		3.6 A	1				NO LEAD	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	S-PDSO-N8	3		.8 mm		2 mm			3.6 V		2.7 V	e3	30		260	2 mm		5.5 V
ISL8845AABZ-T	Renesas Electronics	SWITCHING CONTROLLER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY			1				GULL WING	PULSE FREQUENCY MODULATION			BOOST	SMALL OUTLINE			1.27 mm	105 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	R-PDSO-G8	1		1.75 mm		3.9 mm			15 V		9 V	e3	30		260	4.9 mm		30 V
LM3668SD-4550/NOPB	Texas Instruments	DUAL SWITCHING CONTROLLER	INDUSTRIAL	12	HVSON	SQUARE	YES	2700 kHz	PLASTIC/EPOXY		2.05 A	1				NO LEAD	PULSE WIDTH MODULATION			BUCK-BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC12,.12,16	Switching Regulator or Controllers	.4 mm	85 Cel		VOLTAGE-MODE	-40 Cel	Matte Tin (Sn)		DUAL	S-PDSO-N12	1		.8 mm		3 mm	Not Qualified		3.6 V		2.5 V	e3	NOT SPECIFIED		260	3 mm	4.5 V	5.5 V
LM3671MF-1.5/NOPB	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	2600 kHz	PLASTIC/EPOXY		1.15 A	1				GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.953 mm	85 Cel	1.1 V	VOLTAGE-MODE	-40 Cel	Matte Tin (Sn)	3.3 V	DUAL	R-PDSO-G5	1		1.22 mm		1.6 mm	Not Qualified		3.6 V	PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE	2.7 V	e3	NOT SPECIFIED	1	260	2.92 mm		5.5 V

Switching Regulators & Controllers

Switching regulators and controllers are electronic devices used to regulate the output voltage and current of power supplies. They operate by rapidly switching a power supply circuit between on and off states, resulting in a high-frequency waveform that can be filtered and smoothed to produce a stable output voltage.

Switching regulators and controllers offer several advantages over traditional linear regulators, including higher efficiency and the ability to handle a wider range of input voltages. They are commonly used in applications such as power supplies for computers, LED lighting, and motor control.

Switching regulators and controllers come in a variety of forms, including step-up (boost), step-down (buck), and step-up/down (buck-boost) configurations. They may be designed as integrated circuits (ICs) or as standalone modules.

Switching regulators and controllers typically include feedback control circuits to adjust the output voltage and current, as well as protection circuits to prevent overvoltage, overcurrent, and overtemperature conditions. They may also include features such as soft-start to reduce inrush currents and synchronization with external clock signals.