INDUSTRIAL Switching Regulators & Controllers 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	No. of Functions	Technology	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width (mm)	Qualification	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Length	Nominal Output Voltage	Maximum Input Voltage
CAT3200HU2-GT3	Onsemi	SWITCHED CAPACITOR CONVERTER	INDUSTRIAL	8	HVSON	SQUARE	YES	2600 kHz	PLASTIC/EPOXY		.2 A	1		NO LEAD				BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	Other Analog ICs	.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N8	1	.55 mm	2 mm	Not Qualified	3.6 V	ALSO OPERATES IN ADJUSTABLE MODE WITH SUPPLY VOLTAGE RANGE OF 2.2 V TO 3 V	2.7 V	e4	30		260	2 mm	5 V	4.5 V
CS51414ED8G	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	8	SOP	RECTANGULAR	YES	594 kHz	PLASTIC/EPOXY		3 A	1		GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT/VOLTAGE-MODE	-40 Cel	TIN		DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		CURRENT	4.5 V	e3	30		260	4.9 mm		40 V
EM2130H01QI	Intel	SWITCHING REGULATOR	INDUSTRIAL	104		RECTANGULAR	YES	1333 kHz	UNSPECIFIED			1		NO LEAD	PULSE WIDTH MODULATION			BUCK	SPECIAL SHAPE				85 Cel		VOLTAGE-MODE	-40 Cel			UNSPECIFIED	R-XXSS-N104		6.91 mm	11 mm		5 V	ADJUSTABLE OUTPUT MODE FROM 1.35 TO 3.6V; ALSO REQ SUPPLY PVIN 4.5 TO 16V	4.75 V		NOT SPECIFIED		NOT SPECIFIED	17 mm		5.25 V
EN5319QI	Intel	SWITCHING REGULATOR	INDUSTRIAL	24	HQCCN	RECTANGULAR	YES		UNSPECIFIED		1.5 A	1	CMOS	NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG			.65 mm	85 Cel		VOLTAGE-MODE	-40 Cel			QUAD	R-XQCC-N24	3	1.15 mm	4 mm		5 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO VIN-VDO V	2.4 V					6 mm		5.5 V
FAN48615UC11X	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	9	VFBGA	SQUARE	YES	2800 kHz	PLASTIC/EPOXY		1 A	1		BALL	PULSE WIDTH MODULATION			BOOST	GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	85 Cel		CURRENT-MODE	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)		BOTTOM	S-PBGA-B9	1	.619 mm	1.215 mm		3.6 V		2.7 V	e1	NOT SPECIFIED		NOT SPECIFIED	1.215 mm	5.4 V	5.5 V
FAN48630BUC33X	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	16	FBGA	SQUARE	YES	3000 kHz	PLASTIC/EPOXY		1.5 A			BALL					GRID ARRAY, FINE PITCH	BGA16,4X4,16	Switching Regulator or Controllers	.4 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN SILVER COPPER		BOTTOM	S-PBGA-B16	1			Not Qualified				e1	30		260
FAN49103AUC340X	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	20	VFBGA	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY		2.5 A	1		BALL	PULSE WIDTH MODULATION			BUCK-BOOST	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA20,4X5,16		.4 mm	85 Cel	3.366 V	CURRENT-MODE	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	3.434 V	BOTTOM	R-PBGA-B20	1	.625 mm	1.615 mm		3.6 V	ALSO WORKS IN PFM MODE;OUTPUT RANGE FROM -2.8 TO 4 V	2.5 V	e1	NOT SPECIFIED		NOT SPECIFIED	2.015 mm	3.4 V	5.5 V
FAN5350MPX	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	6	HVSON	SQUARE	YES	3500 kHz	PLASTIC/EPOXY		.9 A	1		NO LEAD	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.11,37	Switching Regulator or Controllers	.95 mm	85 Cel		VOLTAGE-MODE	-40 Cel	NICKEL PALLADIUM		DUAL	S-PDSO-N6	1	.8 mm	3 mm	Not Qualified	3.6 V	ALSO HAS PFM CONTROL TECHNIQUE	2.7 V	e4	30		260	3 mm	1.82 V	5.5 V
FAN5904UC00X	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	16	VFBGA	SQUARE	YES	6000 kHz	PLASTIC/EPOXY		3 A	1		BALL	PULSE WIDTH MODULATION			BUCK	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA16,4X4,16	Switching Regulator or Controllers	.4 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN SILVER COPPER		BOTTOM	S-PBGA-B16	1	.625 mm	1.71 mm	Not Qualified		OPERATES IN ADJUSTABLE MODE FROM 0.4V TO 3.5V, ALSO HAS A CONTROL TECHNIQUE OF PFM	2.7 V	e1	30		260	1.71 mm		5.5 V
FAN6862RTY	Onsemi	SWITCHING CONTROLLER	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	68 kHz	PLASTIC/EPOXY			1		GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.95 mm	105 Cel		CURRENT-MODE	-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G6	1	1.1 mm	1.6 mm	Not Qualified	15 V		9.5 V	e3	30		260	2.9 mm		24 V
FSEZ1317MY	Onsemi	SWITCHING CONTROLLER	INDUSTRIAL	7	SOP	RECTANGULAR	YES	53 kHz	PLASTIC/EPOXY			1		GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE			1.27 mm	105 Cel		CURRENT-MODE	-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G7	3	1.75 mm	3.9 mm	Not Qualified	15 V		5.5 V	e3	30		260	4.9 mm		23 V
FSL106MR	Onsemi	SWITCHING CONTROLLER	INDUSTRIAL	8	DIP	RECTANGULAR	NO	73 kHz	PLASTIC/EPOXY		.62 A	1		THROUGH-HOLE	PULSE WIDTH MODULATION			SINGLE	IN-LINE	DIP8,.3	Switching Regulator or Controllers	2.54 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	14 V		9 V	e3				9.415 mm		650 V
FSQ500L	Onsemi	SWITCHING CONTROLLER	INDUSTRIAL	3	SOP	RECTANGULAR	YES	140 kHz	PLASTIC/EPOXY		.315 A	1		GULL WING	PULSE WIDTH MODULATION			SINGLE	SMALL OUTLINE	SOT-223	Switching Regulator or Controllers	2.3 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	R-PDSO-G3	1	1.8 mm	3.5 mm	Not Qualified	6.5 V		5.5 V	e3	30		260	6.45 mm
LM2576-5.0BUT&R	Micrel	SWITCHING REGULATOR	INDUSTRIAL	5	TO-263	RECTANGULAR	YES	63 kHz	PLASTIC/EPOXY	10 mA	7.5 A	1		GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE			1.7 mm	85 Cel		VOLTAGE-MODE	-40 Cel	TIN LEAD		SINGLE	R-PSSO-G5	3	4.59 mm	9.144 mm	Not Qualified	12 V		4 V	e0	30		240	10.287 mm	5 V	40 V
LM2660M	Texas Instruments	SWITCHED CAPACITOR CONVERTER	INDUSTRIAL	8	SOP	RECTANGULAR	YES	40 kHz	PLASTIC/EPOXY		.1 A	1	CMOS	GULL WING				DOUBLER INVERTER	SMALL OUTLINE	SOP8,.25	Other Analog ICs	1.27 mm	85 Cel	-5.5 V		-40 Cel	TIN LEAD	11 V	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	5 V		1.5 V	e0	20	1	235	4.9 mm		5.5 V
LM2825N-5.0	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	24	DIP	RECTANGULAR	NO	150 kHz	PLASTIC/EPOXY		2.4 A	1	BIPOLAR	THROUGH-HOLE	PULSE WIDTH MODULATION			BUCK	IN-LINE	DIP24,.6	Switching Regulator or Controllers	2.54 mm	85 Cel		VOLTAGE-MODE	-40 Cel	TIN LEAD		DUAL	R-PDIP-T24	1	7.24 mm	15.24 mm	Not Qualified	12 V		7 V	e0				31.75 mm	5 V	40 V
LM3671TL-3.3/NOPB	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	5	VFBGA	RECTANGULAR	YES	2600 kHz	PLASTIC/EPOXY		1.15 A	1		BALL	PULSE WIDTH MODULATION			BUCK	GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel	1.1 V	VOLTAGE-MODE	-40 Cel	Tin/Silver/Copper (Sn/Ag/Cu)	3.3 V	BOTTOM	R-PBGA-B5	1	.675 mm	1.057 mm	Not Qualified	3.6 V	PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE	2.7 V	e1	NOT SPECIFIED	1	260	1.387 mm		5.5 V
LT1076IT#PBF	Analog Devices	SWITCHING REGULATOR	INDUSTRIAL	5	TO-220	RECTANGULAR	NO	125 kHz	PLASTIC/EPOXY	11 mA	3.2 A	1	BIPOLAR	THROUGH-HOLE	PULSE WIDTH MODULATION			BUCK	FLANGE MOUNT				85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN OVER NICKEL		ZIG-ZAG	R-PZFM-T5	1			Not Qualified	25 V		8 V	e3	30		245		2.21 V	60 V
LT1082IQ#PBF	Analog Devices	SWITCHING REGULATOR	INDUSTRIAL	5	TO-263	RECTANGULAR	YES	75 kHz	PLASTIC/EPOXY	7 mA	2.8 A	1	BIPOLAR	GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE			1.7 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN OVER NICKEL		SINGLE	R-PSSO-G5	1	4.572 mm	8.89 mm	Not Qualified	15 V		3 V	e3	30		260	10.2235 mm	1.24 V	75 V
LT1618EMS	Analog Devices	SWITCHING REGULATOR	INDUSTRIAL	10	TSSOP	SQUARE	YES	1600 kHz	PLASTIC/EPOXY		2.8 A	1	BIPOLAR	GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20		.5 mm	85 Cel	1.263 V	CURRENT-MODE	-40 Cel	Tin/Lead (Sn/Pb)	35 V	DUAL	S-PDSO-G10	1	1.1 mm	3 mm	Not Qualified	1.6 V		1.6 V	e0				3 mm		18 V
LT1618EMS#TR	Analog Devices	SWITCHING REGULATOR	INDUSTRIAL	10	TSSOP	SQUARE	YES	1600 kHz	PLASTIC/EPOXY		2.8 A	1	BIPOLAR	GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20		.5 mm	85 Cel	1.263 V	CURRENT-MODE	-40 Cel	Tin/Lead (Sn/Pb)	35 V	DUAL	S-PDSO-G10	1	1.1 mm	3 mm	Not Qualified	1.6 V		1.6 V	e0				3 mm		18 V
LT1930AES5	Analog Devices	SWITCHING REGULATOR	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	2900 kHz	PLASTIC/EPOXY		2.5 A	1		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G5	1	1.45 mm	1.625 mm	Not Qualified	3 V		2.6 V	e0	20		235	2.9 mm		16 V
LT1930AES5#TR	Analog Devices	SWITCHING REGULATOR	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	2900 kHz	PLASTIC/EPOXY		2.5 A	1		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G5	1	1.45 mm	1.625 mm	Not Qualified	3 V		2.6 V	e0	20		235	2.9 mm		16 V
LT1930AES5#TRM	Analog Devices	SWITCHING REGULATOR	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	2900 kHz	PLASTIC/EPOXY		2.5 A	1		GULL WING	PULSE WIDTH MODULATION			BOOST	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G5	1	1.45 mm	1.625 mm	Not Qualified	3 V		2.6 V	e0	20		235	2.9 mm		16 V
LT1931IS5#TRPBF	Analog Devices	SWITCHING REGULATOR	INDUSTRIAL	5	VSSOP	RECTANGULAR	YES	1600 kHz	PLASTIC/EPOXY		2 A	1		GULL WING	PULSE WIDTH MODULATION			BUCK-BOOST	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH			.95 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	R-PDSO-G5	1	1 mm	1.625 mm	Not Qualified	3 V		2.6 V	e3	30		260	2.9 mm		16 V
LT1940LEFE#PBF	Analog Devices	SWITCHING REGULATOR	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	1350 kHz	PLASTIC/EPOXY		1.4 A	2	BIPOLAR	GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		.65 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified	5 V		3.6 V	e3	30		260	5 mm		7 V
LTC1435AIS#PBF	Analog Devices	SWITCHING CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	138 kHz	PLASTIC/EPOXY		2 A	1	CMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE	SOP16,.25		1.27 mm	85 Cel	1.19 V	CURRENT-MODE	-40 Cel	MATTE TIN	9 V	DUAL	R-PDSO-G16	1	1.75 mm	3.9116 mm	Not Qualified	15 V		3.5 V	e3	30		260	9.9 mm		30 V
LTC1435AIS#TRPBF	Analog Devices	SWITCHING CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	138 kHz	PLASTIC/EPOXY		2 A	1	CMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE			1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	R-PDSO-G16	1	1.75 mm	3.9116 mm	Not Qualified	15 V		3.5 V	e3	30		260	9.9 mm		30 V
LTC1517ES5-5#PBF	Analog Devices	SWITCHED CAPACITOR CONVERTER	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	CMOS	GULL WING				DOUBLER INVERTER	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G5	1	1.45 mm	1.6 mm	Not Qualified	3 V		2.7 V	e3	30		260	2.9 mm		5 V
LTC1517ES5-5#TRMPBF	Analog Devices	SWITCHED CAPACITOR CONVERTER	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES		PLASTIC/EPOXY			1	CMOS	GULL WING				DOUBLER INVERTER	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	85 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G5	1	1.45 mm	1.6 mm	Not Qualified	3 V		2.7 V	e3	30		260	2.9 mm		5 V
LTC1556IGN#PBF	Analog Devices	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	20	SSOP	RECTANGULAR	YES	800 kHz	PLASTIC/EPOXY			1		GULL WING				DOUBLER INVERTER	SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G20	1	1.75 mm	3.9116 mm	Not Qualified	3.6 V		2.7 V	e3				8.65 mm		10 V
LTC1556IGN#TRPBF	Analog Devices	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	20	SSOP	RECTANGULAR	YES	800 kHz	PLASTIC/EPOXY			1		GULL WING				DOUBLER INVERTER	SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G20	1	1.75 mm	3.9116 mm	Not Qualified	3.6 V		2.7 V	e3				8.65 mm		10 V
LTC1735IS#PBF	Analog Devices	SWITCHING CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	335 kHz	PLASTIC/EPOXY		3 A	1	CMOS	GULL WING				BUCK	SMALL OUTLINE	SOP16,.25		1.27 mm	85 Cel	.8 V	CURRENT-MODE	-40 Cel	MATTE TIN	6 V	DUAL	R-PDSO-G16	1	1.752 mm	3.9 mm	Not Qualified	15 V		4 V	e3	30		260	9.9 mm		36 V
LTC1735IS#TR	Analog Devices	SWITCHING CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	335 kHz	PLASTIC/EPOXY		3 A	1	CMOS	GULL WING				BUCK	SMALL OUTLINE	SOP16,.25		1.27 mm	85 Cel	.8 V	CURRENT-MODE	-40 Cel	TIN LEAD	6 V	DUAL	R-PDSO-G16	1	1.752 mm	3.9 mm	Not Qualified	15 V		4 V	e0				9.9 mm		36 V
LTC1735IS#TRPBF	Analog Devices	SWITCHING CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	335 kHz	PLASTIC/EPOXY		3 A	1	CMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE			1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	15 V		3.5 V	e3	30		260	9.9 mm		36 V
LTC1735IS-1	Analog Devices	SWITCHING CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	550 kHz	PLASTIC/EPOXY		3 A	1	CMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE			1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	TIN LEAD		DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	15 V		3.5 V	e0				9.9 mm		36 V
LTC1735IS-1#TRPBF	Analog Devices	SWITCHING CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	550 kHz	PLASTIC/EPOXY		3 A	1	CMOS	GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE			1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	15 V		3.5 V	e3	30		260	9.9 mm		36 V
LTC1877IMS8#PBF	Analog Devices	SWITCHING REGULATOR	INDUSTRIAL	8	TSSOP	SQUARE	YES	605 kHz	PLASTIC/EPOXY		1.5 A	1	CMOS	GULL WING	PULSE WIDTH MODULATION			BUCK	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	5 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.74 V TO 0.84 V	2.65 V	e3	30		260	3 mm	.8 V	10 V
LTC3703EG-5#PBF	Analog Devices	SWITCHING CONTROLLER	INDUSTRIAL	28	SSOP	SQUARE	YES	330 kHz	PLASTIC/EPOXY		5 A	1		GULL WING	PULSE WIDTH MODULATION			PUSH-PULL	SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel		VOLTAGE-MODE	-40 Cel	MATTE TIN		DUAL	S-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	5 V		4.1 V	e3	30		260	10.2 mm		15 V
LTC3850IUFD#PBF	Analog Devices	DUAL SWITCHING CONTROLLER	INDUSTRIAL	28	HVQCCN	RECTANGULAR	YES	860 kHz	PLASTIC/EPOXY		.1 A	2	CMOS	NO LEAD	PULSE WIDTH MODULATION			PHASE-SHIFT	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.16X.2,20		.5 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		QUAD	R-PQCC-N28	1	.8 mm	4 mm	Not Qualified	15 V		4 V	e3	30		260	5 mm		30 V
LTC3862EGN#PBF	Analog Devices	DUAL SWITCHING CONTROLLER	INDUSTRIAL	24	SSOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY			1		GULL WING	PULSE WIDTH MODULATION			PHASE-SHIFT	SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel		CURRENT-MODE	-40 Cel	MATTE TIN		DUAL	R-PDSO-G24	1	1.75 mm	3.899 mm	Not Qualified	12 V		4 V	e3	30		260	8.649 mm	3.8 V	36 V
LTM4601AHVIV#PBF	Analog Devices	SWITCHING CONTROLLER	INDUSTRIAL	133	LGA	SQUARE	YES	850 kHz	PLASTIC/EPOXY		17 A	1		NO LEAD	PULSE WIDTH MODULATION			PUSH-PULL	GRID ARRAY			1.27 mm	85 Cel		CURRENT-MODE	-40 Cel	GOLD		BOTTOM	S-PBGA-N133	3	2.92 mm	15 mm	Not Qualified	12 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5V	4.5 V	e4	30		245	15 mm	5 V	28 V
MAX16945TGUT#TG16	Maxim Integrated	SWITCHED CAPACITOR CONVERTER	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	200 kHz	PLASTIC/EPOXY		.09 A	1	BICMOS	GULL WING				DOUBLER INVERTER	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	105 Cel			-40 Cel	MATTE TIN		DUAL	R-PDSO-G6	1	1.45 mm	1.625 mm		5 V		1.4 V	e3			245	2.9 mm		5.5 V
MAX16945TGUT/V+T	Analog Devices	SWITCHED CAPACITOR CONVERTER	INDUSTRIAL	6	LSSOP	RECTANGULAR	YES	200 kHz	PLASTIC/EPOXY		.09 A	1	BICMOS	GULL WING				DOUBLER INVERTER	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.95 mm	105 Cel			-40 Cel	Matte Tin (Sn) - annealed		DUAL	R-PDSO-G6	1	1.45 mm	1.625 mm		5 V		1.4 V	e3	30		260	2.9 mm		5.5 V
MAX17085BETL+	Analog Devices	SWITCHING REGULATOR	INDUSTRIAL	40	HVQCCN	SQUARE	YES	1400 kHz	UNSPECIFIED	1.5 mA		1	BICMOS	NO LEAD	PULSE WIDTH MODULATION	5 V	5	BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.2SQ,16	Power Management Circuits	.4 mm	85 Cel		CURRENT-MODE	-40 Cel	Matte Tin (Sn) - annealed		QUAD	S-XQCC-N40	1	.8 mm	5 mm	Not Qualified	19 V	ALSO OPERATES AS LDO REGULATOR; 5 VOLT OUTPUT ALSO AVAILABLE	4.5 V	e3	30		260	5 mm	3.3 V	24 V
MC34716EP	NXP Semiconductors	DUAL SWITCHING CONTROLLER	INDUSTRIAL	26	HVQCCN	SQUARE	YES	1000 kHz	UNSPECIFIED		5 A	1		NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC26(UNSPEC)	Switching Regulator or Controllers	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel			QUAD	S-XQCC-N26	3	1 mm	5 mm	Not Qualified	3.3 V		3 V		40		260	5 mm		6 V
MC34716EP/R2	Freescale Semiconductor	DUAL SWITCHING CONTROLLER	INDUSTRIAL	26	HVQCCN	SQUARE	YES	1000 kHz	UNSPECIFIED		5 A	1		NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC26(UNSPEC)	Switching Regulator or Controllers	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel			QUAD	S-XQCC-N26	3	1 mm	5 mm	Not Qualified	3.3 V		3 V		40		260	5 mm		6 V
MC34716EPR2	NXP Semiconductors	DUAL SWITCHING CONTROLLER	INDUSTRIAL	26	HVQCCN	SQUARE	YES	1000 kHz	UNSPECIFIED		5 A	1		NO LEAD	PULSE WIDTH MODULATION			BUCK	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC26(UNSPEC)	Switching Regulator or Controllers	.5 mm	85 Cel		VOLTAGE-MODE	-40 Cel			QUAD	S-XQCC-N26	3	1 mm	5 mm	Not Qualified	3.3 V		3 V		40		260	5 mm		6 V

Switching Regulators & Controllers

Switching regulators and controllers are electronic devices used to regulate the output voltage and current of power supplies. They operate by rapidly switching a power supply circuit between on and off states, resulting in a high-frequency waveform that can be filtered and smoothed to produce a stable output voltage.

Switching regulators and controllers offer several advantages over traditional linear regulators, including higher efficiency and the ability to handle a wider range of input voltages. They are commonly used in applications such as power supplies for computers, LED lighting, and motor control.

Switching regulators and controllers come in a variety of forms, including step-up (boost), step-down (buck), and step-up/down (buck-boost) configurations. They may be designed as integrated circuits (ICs) or as standalone modules.

Switching regulators and controllers typically include feedback control circuits to adjust the output voltage and current, as well as protection circuits to prevent overvoltage, overcurrent, and overtemperature conditions. They may also include features such as soft-start to reduce inrush currents and synchronization with external clock signals.