INDUSTRIAL Switching Regulators & Controllers 2,400+

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Maximum Switching Frequency	Package Body Material	Maximum Supply Current (Isup)	Maximum Output Current	Trim or Adjustable Output (V)	No. of Functions	Technology	Screening Level	Terminal Form	Control Technique	Nominal Supply Voltage (Vsup)	Switcher Config	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output Voltage	Control Mode	Maximum Total Power Output	Minimum Operating Temperature	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Maximum Load Regulation	Nominal Input Voltage	Additional Features	Minimum Input Voltage	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Length	Nominal Output Voltage	Maximum Input Voltage
MCP1642BT-ADJI/MC	Microchip Technology	SWITCHING REGULATOR	INDUSTRIAL	8	HVSON	RECTANGULAR	YES	1150 kHz	PLASTIC/EPOXY		.8 A		1		TS 16949	NO LEAD	PULSE WIDTH MODULATION		BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20		.5 mm	85 Cel	1.8 V	CURRENT-MODE		-40 Cel	MATTE TIN	5.5 V	DUAL	R-PDSO-N8	1		1 mm	2 mm				ADJ OUTPUT FROM 1.8V TO 5.5V	1.5 V	e3	40		260	3 mm		3 V
MCP1642D-ADJI/MS	Microchip Technology	SWITCHING REGULATOR	INDUSTRIAL	8	TSSOP	SQUARE	YES	1150 kHz	PLASTIC/EPOXY		.8 A		1		TS 16949	GULL WING	PULSE WIDTH MODULATION		BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		.65 mm	85 Cel	1.8 V	CURRENT-MODE		-40 Cel	MATTE TIN	5.5 V	DUAL	S-PDSO-G8			1.1 mm	3 mm				ADJ OUTPUT FROM 1.8V TO 5.5V	1.5 V	e3				3 mm		3 V
MIC2182YM	Microchip Technology	SWITCHING CONTROLLER	INDUSTRIAL	16	SOP	RECTANGULAR	YES	330 kHz	PLASTIC/EPOXY		20 A		1	BICMOS		GULL WING	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE	SOP16,.25		1.27 mm	85 Cel	1.25 V	CURRENT-MODE		-40 Cel	MATTE TIN	6 V	DUAL	R-PDSO-G16	1		1.895 mm	3.9 mm	Not Qualified		15 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 1.25 TO 6 V	4.5 V	e3			260	9.9 mm		32 V
MIC38C42AYMM	Microchip Technology	SWITCHING CONTROLLER	INDUSTRIAL	8	TSSOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY	6 mA	.5 A		1	BICMOS		GULL WING	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		.65 mm	85 Cel		CURRENT-MODE		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G8	1		1.1 mm	3 mm	Not Qualified		15 V		10 V	e4	40		260	3 mm		18 V
MIC38C42AYMM-TR	Microchip Technology	SWITCHING CONTROLLER	INDUSTRIAL	8	TSSOP	SQUARE	YES	500 kHz	PLASTIC/EPOXY	6 mA	.5 A		1	BICMOS		GULL WING	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		.65 mm	85 Cel		CURRENT-MODE		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	1		1.1 mm	3 mm	Not Qualified		15 V		10 V	e4	40		260	3 mm		18 V
MIC38C45YMM	Microchip Technology	SWITCHING CONTROLLER	INDUSTRIAL	8	TSSOP	SQUARE	YES	500 kHz	PLASTIC/EPOXY		.5 A		1	BICMOS		GULL WING	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		.65 mm	85 Cel		CURRENT-MODE		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-G8	1		1.1 mm	3 mm	Not Qualified		15 V		12 V	e4	40		260	3 mm		18 V
MP2403DN-LF-Z	Monolithic Power Systems	SWITCHING REGULATOR	INDUSTRIAL	8	HSOP	RECTANGULAR	YES	305 kHz	PLASTIC/EPOXY	1.6 mA	5.3 A		1			GULL WING			BUCK	SMALL OUTLINE, HEAT SINK/SLUG	SOP8,.23		1.27 mm	85 Cel	.8 V	CURRENT-MODE		-40 Cel	MATTE TIN	28 V	DUAL	R-PDSO-G8	2		1.73 mm	3.9 mm	Not Qualified		12 V	OUTPUT VOLTAGE IS ADJUSTABLE FROM 0.8 TO 28V	4.6 V	e3				4.9 mm		32 V
MP6001DN-LF	Monolithic Power Systems	SWITCHING REGULATOR	INDUSTRIAL	8	HLSOP	RECTANGULAR	YES	550 kHz	PLASTIC/EPOXY	1.5 mA			1			GULL WING	PULSE WIDTH MODULATION	5 V	BUCK-BOOST	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		1.27 mm	85 Cel	-.5 V	CURRENT-MODE		-40 Cel	MATTE TIN	150 V	DUAL	R-PDSO-G8	2A		1.7 mm	3.9 mm	Not Qualified		20 V		10 V	e3				4.9 mm		100 V
NCP5911MNTBG	Onsemi	SWITCHING REGULATOR	INDUSTRIAL	8	HVSON	SQUARE	YES		PLASTIC/EPOXY				1			NO LEAD	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	100 Cel				-40 Cel	TIN		DUAL	S-PDSO-N8	1		1 mm	2 mm	Not Qualified		5 V		4.5 V	e3	30		260	2 mm		5.5 V
NJM2374AM	New Japan Radio	SWITCHING REGULATOR	INDUSTRIAL	8	SOP	SQUARE	YES	100 kHz	PLASTIC/EPOXY		1.5 A		1	BIPOLAR		GULL WING	PULSE WIDTH MODULATION		BOOST	SMALL OUTLINE			1.27 mm	85 Cel				-40 Cel	TIN BISMUTH		DUAL	S-PDSO-G8			2 mm	5 mm	Not Qualified		5 V		2.5 V	e6				5 mm		40 V
PAM2320BECADJR	Diodes Incorporated	SWITCHING REGULATOR	INDUSTRIAL	8	HSOP	RECTANGULAR	YES	1500 kHz	PLASTIC/EPOXY				1			GULL WING	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE, HEAT SINK/SLUG			1.27 mm	85 Cel				-40 Cel	MATTE TIN		DUAL	R-PDSO-G8	3		1.75 mm	3.9 mm			3.6 V	OUTPUT VOLTAGE RANGE FROM 0.6 V TO 5.5 V	2.7 V	e3	30		260	4.9 mm	1.8 V	5.5 V
PAM2325AGPADJ	Diodes Incorporated	SWITCHING REGULATOR	INDUSTRIAL	12		SQUARE	YES	1200 kHz	UNSPECIFIED				1			NO LEAD	PULSE WIDTH MODULATION		BUCK	SPECIAL SHAPE				85 Cel				-40 Cel	MATTE TIN		UNSPECIFIED	S-XXSS-N12	3		.8 mm	2 mm			3.3 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 1 TO 4V	2.5 V	e3	30		260	2 mm		5.5 V
PTN04050CAH	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	4		RECTANGULAR	NO	600 kHz	PLASTIC/EPOXY		2.4 A		1	HYBRID		PIN/PEG	PULSE WIDTH MODULATION		BOOST	MICROELECTRONIC ASSEMBLY				85 Cel	5 V			-40 Cel	MATTE TIN	15 V	DUAL	R-PDMA-P4				12.57 mm	Not Qualified		5 V	OUTPUT VOLTAGE ADJUST RANGE 5V TO 15V	2.95 V	e3		1		22.1 mm		5.5 V
RB-1212D	Recom Power	DC-DC REGULATED POWER SUPPLY MODULE	INDUSTRIAL	5		RECTANGULAR	NO		UNSPECIFIED		.042 A	NO	1	HYBRID		PIN/PEG				MICROELECTRONIC ASSEMBLY	SIP5/7,.05	Other Analog ICs	2.54 mm	85 Cel	11.4 V		.504 W	-40 Cel		12.6 V	SINGLE	R-XSMA-P5			6.25 mm	10.2 mm	Not Qualified	10 %	12 V	ADDITIONAL -12 VOLT OUTPUT AVAILABLE	10.8 V		NOT SPECIFIED	2	NOT SPECIFIED	19.6 mm	12 V	13.2 V
REG71055DDCR	Texas Instruments	SWITCHED CAPACITOR CONVERTER	INDUSTRIAL	6	TSSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY		.06 A		1			GULL WING			DOUBLER INVERTER	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP6,.11,37	Other Analog ICs	.95 mm	85 Cel	5.5 V			-40 Cel	NICKEL PALLADIUM GOLD	5.5 V	DUAL	R-PDSO-G6	1		1.1 mm	1.6 mm	Not Qualified		3.5 V		3 V	e4	30	1	260	2.9 mm	5.5 V	5.5 V
REG711EA-5/250	Texas Instruments	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	8	TSSOP	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		.05 A		1			GULL WING			DOUBLER INVERTER	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Other Analog ICs	.65 mm	85 Cel	5 V			-40 Cel	NICKEL PALLADIUM GOLD SILVER	5 V	DUAL	S-PDSO-G8	2		1.07 mm	3 mm	Not Qualified		3.25 V		2.7 V	e4	30	1	260	3 mm	5 V	5.5 V
REG711EA-5/2K5	Texas Instruments	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	8	TSSOP	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		.05 A		1			GULL WING			DOUBLER INVERTER	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Other Analog ICs	.65 mm	85 Cel	5 V			-40 Cel	NICKEL PALLADIUM GOLD SILVER	5 V	DUAL	S-PDSO-G8	2		1.07 mm	3 mm	Not Qualified		3.25 V		2.7 V	e4	30	1	260	3 mm	5 V	5.5 V
REG711EA-5/2K5G4	Texas Instruments	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	8	TSSOP	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		.005 A		1			GULL WING			DOUBLER INVERTER	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Other Analog ICs	.65 mm	85 Cel				-40 Cel			DUAL	S-PDSO-G8	2		1.07 mm	3 mm	Not Qualified		3.25 V		2.7 V		30		260	3 mm	5 V	5.5 V
RT8020AGQW	Richtek Technology	DUAL SWITCHING CONTROLLER	INDUSTRIAL	12	HVSON	SQUARE	YES	1800 kHz	PLASTIC/EPOXY				1			NO LEAD	PULSE WIDTH MODULATION		PHASE-SHIFT	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.45 mm	85 Cel				-40 Cel			DUAL	S-PDSO-N12			.8 mm	3 mm			3.6 V	3.3 VOLT OUTPUT ALSO AVAILABLE	2.5 V		NOT SPECIFIED		NOT SPECIFIED	3 mm	1.8 V	5.5 V
RT8072GSP	Richtek Technology	SWITCHING REGULATOR	INDUSTRIAL	8	SOP	RECTANGULAR	YES	2000 kHz	PLASTIC/EPOXY		5 A					GULL WING				SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE		-40 Cel			DUAL	R-PDSO-G8					Not Qualified
SI9100DN	Vishay Intertechnology	SWITCHING REGULATOR	INDUSTRIAL	20	QCCJ	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		2.5 A		1	BICMOS		J BEND	PULSE WIDTH MODULATION		SINGLE	CHIP CARRIER			1.27 mm	85 Cel		CURRENT-MODE		-40 Cel	TIN LEAD		QUAD	S-PQCC-J20			4.57 mm	8.9662 mm	Not Qualified				10 V	e0				8.9662 mm	4 V	70 V
SI9100DN02	Vishay Intertechnology	SWITCHING REGULATOR	INDUSTRIAL	20	QCCJ	SQUARE	YES	3000 kHz	PLASTIC/EPOXY		2.5 A		1	BCDMOS		J BEND			SINGLE	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE		-40 Cel	TIN LEAD		QUAD	S-PQCC-J20			4.57 mm	8.9662 mm	Not Qualified		10 V		9.5 V	e0				8.9662 mm		13.5 V
SI9100DN02-E3	Vishay Intertechnology	SWITCHING REGULATOR	INDUSTRIAL	20	QCCJ	SQUARE	YES	3000 kHz	PLASTIC/EPOXY		2.5 A		1	BCDMOS		J BEND			SINGLE	CHIP CARRIER	LDCC20,.4SQ	Switching Regulator or Controllers	1.27 mm	85 Cel		CURRENT-MODE		-40 Cel	Matte Tin (Sn)		QUAD	S-PQCC-J20	1		4.57 mm	8.9662 mm	Not Qualified		10 V		9.5 V	e3	30		260	8.9662 mm		13.5 V
TL2843BDR	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	14	SOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY	30 mA	1 A		1	BIPOLAR		GULL WING	PULSE WIDTH MODULATION	15 V	BUCK-BOOST	SMALL OUTLINE	SOP14,.25	Switching Regulator or Controllers	1.27 mm	85 Cel	4.95 V	CURRENT-MODE		-40 Cel	NICKEL PALLADIUM GOLD	5.05 V	DUAL	R-PDSO-G14	1	30 V	1.75 mm	3.9 mm	Not Qualified		15 V		12 V	e4	30		260	8.65 mm	5 V	30 V
TL2844D-8	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	8	SOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY	30 mA	1 A		1	BIPOLAR		GULL WING	PULSE WIDTH MODULATION	15 V	BUCK-BOOST	SMALL OUTLINE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel	4.95 V	CURRENT-MODE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.05 V	DUAL	R-PDSO-G8	1	30 V	1.75 mm	3.9 mm	Not Qualified		15 V		12 V	e4	NOT SPECIFIED		260	4.9 mm	5 V	30 V
TL2844DRG4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	14	SOP	RECTANGULAR	YES	500 kHz	PLASTIC/EPOXY	30 mA	1 A		1			GULL WING	PULSE WIDTH MODULATION	15 V	BUCK-BOOST	SMALL OUTLINE	SOP14,.25	Switching Regulator or Controllers	1.27 mm	85 Cel	4.95 V	CURRENT-MODE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.05 V	DUAL	R-PDSO-G14	1	30 V	1.75 mm	3.9 mm	Not Qualified		15 V		11 V	e4	NOT SPECIFIED		260	8.65 mm	5 V	30 V
TLV62566DBVR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	5	LSSOP	RECTANGULAR	YES	1500 kHz	PLASTIC/EPOXY		1.5 A		1			GULL WING	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		.95 mm	85 Cel	.6 V	CURRENT-MODE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.2 V	DUAL	R-PDSO-G5	1		1.45 mm	1.6 mm			3.6 V	ALSO OPERATES IN PFM CONTROL TECHNIQUE; ADJUSTABLE OUTPUT MODE FROM 0.6 TO 5.225V	2.7 V	e4	NOT SPECIFIED	1	260	2.9 mm		5.5 V
TPS40054PWPRG4	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	1000 kHz	PLASTIC/EPOXY				1			GULL WING	PULSE WIDTH MODULATION		PUSH-PULL	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	31.2 V	VOLTAGE-MODE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	33.5 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified		24 V		8 V	e4	NOT SPECIFIED		260	5 mm	32.2 V	40 V
TPS51116RGET	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	24	HVQCCN	SQUARE	YES	400 kHz	PLASTIC/EPOXY		6 A		1			NO LEAD	PULSE WIDTH MODULATION		PUSH-PULL	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Switching Regulator or Controllers	.5 mm	85 Cel		CURRENT-MODE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)		QUAD	S-PQCC-N24	2		1 mm	4 mm	Not Qualified		5 V		3 V	e4	NOT SPECIFIED		260	4 mm		28 V
TPS51117PW	Texas Instruments	SWITCHING CONTROLLER	INDUSTRIAL	14	TSSOP	RECTANGULAR	YES	550 kHz	PLASTIC/EPOXY		10 A		1			GULL WING	PULSE WIDTH MODULATION		PUSH-PULL	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Switching Regulator or Controllers	.65 mm	85 Cel	.76 V	VOLTAGE-MODE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	5.5 V	DUAL	R-PDSO-G14	1		1.2 mm	4.4 mm	Not Qualified		5 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.75 TO 5.5V	1.8 V	e4	NOT SPECIFIED	1	260	5 mm		28 V
TPS54528DDA	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	8	HLSOP	RECTANGULAR	YES	650 kHz	PLASTIC/EPOXY		5 A		1			GULL WING	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25	Switching Regulator or Controllers	1.27 mm	85 Cel	.76 V	VOLTAGE-MODE		-40 Cel	NICKEL PALLADIUM GOLD	6 V	DUAL	R-PDSO-G8	2		1.7 mm	3.9 mm	Not Qualified		12 V	ADJUSTABLE OUTPUT MODE FROM 0.76 TO 6 V	4.5 V	e4	30	1	260	4.9 mm		18 V
TPS54910PWPR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	28	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		9 A		1			GULL WING	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	.9 V	VOLTAGE-MODE		-40 Cel	NICKEL PALLADIUM GOLD	2.5 V	DUAL	R-PDSO-G28	2		1.2 mm	4.4 mm	Not Qualified		3.3 V		3 V	e4	30	1	260	9.7 mm		4 V
TPS54910PWPRG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	28	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		9 A		1			GULL WING	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH			.65 mm	85 Cel	.9 V	VOLTAGE-MODE		-40 Cel	NICKEL PALLADIUM GOLD	2.5 V	DUAL	R-PDSO-G28	2		1.2 mm	4.4 mm	Not Qualified		3.3 V		3 V	e4	30	1	260	9.7 mm		4 V
TPS60151DRVR	Texas Instruments	SWITCHED CAPACITOR REGULATOR	INDUSTRIAL	6	HVSON	SQUARE	YES	1500 kHz	PLASTIC/EPOXY		.14 A		1			NO LEAD	PULSE WIDTH MODULATION			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.08,25	Other Analog ICs	.65 mm	85 Cel	5 V			-40 Cel	NICKEL PALLADIUM GOLD	5 V	DUAL	S-PDSO-N6	1		.8 mm	2 mm	Not Qualified		3.6 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 4.8V TO 5.2V	2.7 V	e4	30	1	260	2 mm	5 V	5.5 V
TPS61006DGS	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	TSSOP	SQUARE	YES	840 kHz	PLASTIC/EPOXY		1.3 A		1			GULL WING	PULSE WIDTH MODULATION		BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Switching Regulator or Controllers	.5 mm	85 Cel	3.3 V	CURRENT-MODE		-40 Cel	NICKEL PALLADIUM GOLD	3.3 V	DUAL	S-PDSO-G10	1		1.1 mm	3 mm	Not Qualified		1.2 V		.8 V	e4	30	1	260	3 mm	3.3 V	3.3 V
TPS61010DRCR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	VSON	SQUARE	YES	780 kHz	PLASTIC/EPOXY		1.3 A		1			NO LEAD	PULSE WIDTH MODULATION		BOOST	SMALL OUTLINE, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel		CURRENT-MODE		-40 Cel			DUAL	S-PDSO-N10			1 mm	3 mm	Not Qualified		1.2 V	ALSO OPERATES IN ADJUSTABLE MODE FROM 1.5V TO 3.3V	.8 V		NOT SPECIFIED		NOT SPECIFIED	3 mm		3.3 V
TPS61013DGSRG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	TSSOP	SQUARE	YES	780 kHz	PLASTIC/EPOXY		1.3 A		1			GULL WING	PULSE WIDTH MODULATION		BOOST	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Switching Regulator or Controllers	.5 mm	85 Cel		CURRENT-MODE		-40 Cel			DUAL	S-PDSO-G10			1.1 mm	3 mm	Not Qualified		1.2 V		.8 V		NOT SPECIFIED		NOT SPECIFIED	3 mm		2.58 V
TPS61024DRCR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	HVSON	SQUARE	YES	720 kHz	PLASTIC/EPOXY		1.8 A		1			NO LEAD	PULSE WIDTH MODULATION		BOOST	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel	3 V	CURRENT-MODE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	3 V	DUAL	S-PDSO-N10	2		1 mm	3 mm	Not Qualified		1.2 V		.9 V	e4	NOT SPECIFIED	1	260	3 mm	3 V	6.5 V
TPS61032PWP	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		4.5 A		1			GULL WING	PULSE WIDTH MODULATION		BOOST	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel	5 V	CURRENT-MODE		-40 Cel	NICKEL PALLADIUM GOLD	5 V	DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified		2.4 V		1.8 V	e4	30	1	260	5 mm	5 V	5.5 V
TPS61032PWPG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HTSSOP	RECTANGULAR	YES	700 kHz	PLASTIC/EPOXY		4.5 A		1			GULL WING	PULSE WIDTH MODULATION		BOOST	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16	2		1.2 mm	4.4 mm	Not Qualified		2.4 V		1.8 V	e4	30		260	5 mm	5 V	5.5 V
TPS61041DRVTG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	6	VSON	SQUARE	YES	1000 kHz	PLASTIC/EPOXY		.285 A		1			NO LEAD	PULSE FREQUENCY MODULATION		BOOST	SMALL OUTLINE, VERY THIN PROFILE	SOLCC6,.08,25	Switching Regulator or Controllers	.65 mm	85 Cel	1.8 V	CURRENT-MODE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	28 V	DUAL	S-PDSO-N6	1		.8 mm	2 mm	Not Qualified		2.4 V	OPERATES IN ADJUSTABLE MODE FROM 1.8 TO 28 V	1.8 V	e4	NOT SPECIFIED	1	260	2 mm		6 V
TPS61091RSAR	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	700 kHz	PLASTIC/EPOXY		2.5 A		1			NO LEAD	PULSE WIDTH MODULATION		BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Switching Regulator or Controllers	.65 mm	85 Cel	3.3 V	CURRENT-MODE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	3.3 V	QUAD	S-PQCC-N16	2		1 mm	4 mm	Not Qualified				1.8 V	e4	NOT SPECIFIED	1	260	4 mm		5.5 V
TPS61091RSARG4	Texas Instruments	BATTERY CHARGE CONTROLLER	INDUSTRIAL	16	HVQCCN	SQUARE	YES	700 kHz	PLASTIC/EPOXY		2.5 A		1			NO LEAD	PULSE WIDTH MODULATION		BOOST	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Switching Regulator or Controllers	.65 mm	85 Cel		CURRENT-MODE		-40 Cel	NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N16	2		1 mm	4 mm	Not Qualified				1.8 V	e4	30		260	4 mm		5.5 V
TPS62171DSGR	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	8	HVSON	SQUARE	YES	2250 kHz	PLASTIC/EPOXY		.5 A		1			NO LEAD	HYSTERETIC CURRENT MODE	12 V	BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.08,20	Switching Regulator or Controllers	.5 mm	85 Cel	1.8 V	CURRENT-MODE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	1.8 V	DUAL	S-PDSO-N8	2		.8 mm	2 mm	Not Qualified		12 V	ALSO OPERATES IN VOLT MODE AND PWM CTRL TECHNIQUE ALSO POSBL	3 V	e4	NOT SPECIFIED	1	260	2 mm	1.8 V	17 V
TPS62173DSG	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	8	HVSON	SQUARE	YES	2250 kHz	PLASTIC/EPOXY		1.35 A		1			NO LEAD	HYSTERETIC CURRENT MODE		BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		CURRENT-MODE		-40 Cel			DUAL	S-PDSO-N8			.8 mm	2 mm			12 V	ALSO OPERATES IN VOLT MODE AND PWM CTRL TECHNIQUE ALSO POSBL	3 V					2 mm	5 V	17 V
TPS62262TDRVRQ1	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	6	HVSON	SQUARE	YES	2250 kHz	PLASTIC/EPOXY		.6 A		1			NO LEAD	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE			.65 mm	105 Cel	1.2 V	VOLTAGE-MODE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	1.2 V	DUAL	S-PDSO-N6	2		.8 mm	2 mm	Not Qualified		3.6 V	ALSO HAS CONTROL TECHNIQUE OF PFM, ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 6 V	2 V	e4	NOT SPECIFIED	1	260	2 mm	1.8 V	6 V
TPS62510DRCRG4	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	10	HVSON	SQUARE	YES	1700 kHz	PLASTIC/EPOXY		1.5 A		1			NO LEAD	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20	Switching Regulator or Controllers	.5 mm	85 Cel		VOLTAGE-MODE		-40 Cel	NICKEL PALLADIUM GOLD		DUAL	S-PDSO-N10	2		1 mm	3 mm	Not Qualified		3.3 V	PFM MODE ALSO AVAILABLE	1.8 V	e4	30		260	3 mm		3.8 V
TPS62562DRVT	Texas Instruments	SWITCHING REGULATOR	INDUSTRIAL	6	VSON	SQUARE	YES	2500 kHz	PLASTIC/EPOXY		.6 A		1			NO LEAD	PULSE WIDTH MODULATION		BUCK	SMALL OUTLINE, VERY THIN PROFILE			.65 mm	85 Cel	1.8 V	VOLTAGE-MODE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	1.8 V	DUAL	S-PDSO-N6	1		.8 mm	2 mm	Not Qualified		3.6 V	PFM MODE ALSO AVAILABLE	2.5 V	e4	NOT SPECIFIED	1	260	2 mm	1.8 V	5.5 V

Switching Regulators & Controllers

Switching regulators and controllers are electronic devices used to regulate the output voltage and current of power supplies. They operate by rapidly switching a power supply circuit between on and off states, resulting in a high-frequency waveform that can be filtered and smoothed to produce a stable output voltage.

Switching regulators and controllers offer several advantages over traditional linear regulators, including higher efficiency and the ability to handle a wider range of input voltages. They are commonly used in applications such as power supplies for computers, LED lighting, and motor control.

Switching regulators and controllers come in a variety of forms, including step-up (boost), step-down (buck), and step-up/down (buck-boost) configurations. They may be designed as integrated circuits (ICs) or as standalone modules.

Switching regulators and controllers typically include feedback control circuits to adjust the output voltage and current, as well as protection circuits to prevent overvoltage, overcurrent, and overtemperature conditions. They may also include features such as soft-start to reduce inrush currents and synchronization with external clock signals.