INDUSTRIAL Other Function uPs,uCs & Peripheral ICs 2,400+

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	Maximum Seated Height	Width	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Technology	Maximum Supply Current	Nominal Supply Voltage	Sub-Category	Terminal Pitch	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	JESD-609 Code
DS8314L-RJX+	Analog Devices	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	3.3,5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	2.7 V	85 Cel	-40 Cel		DUAL	1.1 mm	4.4 mm	NOT SPECIFIED	NOT SPECIFIED	9.7 mm	CMOS	85 mA	3.3 V	Other Microprocessor ICs	.65 mm	R-PDSO-G28		Not Qualified
DS8113-JNG+	Analog Devices	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	4.4 mm	30	260	9.7 mm	CMOS		3.3 V		.65 mm	R-PDSO-G28	1		e3
MAX7359ETG+T	Analog Devices	MICROPROCESSOR CIRCUIT	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.62 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	.8 mm	3.5 mm	30	260	3.5 mm	BICMOS		2.5 V		.4 mm	S-XQCC-N24	1		e3
DS8314-RRX+	Analog Devices	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	3.3,5	SMALL OUTLINE	SOP28,.4	2.7 V	85 Cel	-40 Cel		DUAL	2.65 mm	7.5 mm	NOT SPECIFIED	NOT SPECIFIED	17.9 mm	CMOS	85 mA	3.3 V	Other Microprocessor ICs	1.27 mm	R-PDSO-G28		Not Qualified
71M6545H-IGTR/F	Analog Devices	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V		FLATPACK, LOW PROFILE, FINE PITCH		3 V	85 Cel	-40 Cel		QUAD	1.6 mm	10 mm	NOT SPECIFIED	NOT SPECIFIED	10 mm	CMOS		3.3 V		.5 mm	S-PQFP-G64		Not Qualified
DS1209SN-B1	Analog Devices	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		5	SMALL OUTLINE	SOP16,.4		85 Cel	-40 Cel	TIN LEAD	DUAL						CMOS	.5 mA	5 V	Other Microprocessor ICs	1.27 mm	R-PDSO-G16		Not Qualified	e0
MAXQ1061ETP+	Analog Devices	MICROPROCESSOR CIRCUIT	INDUSTRIAL	NO LEAD	20		RECTANGULAR	UNSPECIFIED	YES						109 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD			30	260		CMOS					R-XQCC-N20	1		e3
DS24L65P+T	Analog Devices	MICROPROCESSOR CIRCUIT	INDUSTRIAL	C BEND	6	SOC	RECTANGULAR	PLASTIC/EPOXY	YES	1.89 V		SMALL OUTLINE		1.71 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.5 mm		30	260		CMOS		1.8 V		1.27 mm	R-PDSO-C6	1		e3
DS24L65P+	Analog Devices	MICROPROCESSOR CIRCUIT	INDUSTRIAL	C BEND	6	SOC	RECTANGULAR	PLASTIC/EPOXY	YES	1.89 V		SMALL OUTLINE		1.71 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.5 mm		30	260		CMOS		1.8 V		1.27 mm	R-PDSO-C6	1		e3
DS2460S+T&R	Analog Devices	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3/5	SMALL OUTLINE	SOP8,.25	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm	3.9 mm	30	260	4.9 mm	CMOS	.5 mA		Other Microprocessor ICs	1.27 mm	R-PDSO-G8	1	Not Qualified	e3
DS2460S+	Analog Devices	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3/5	SMALL OUTLINE	SOP8,.25	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm	3.9 mm	30	260	4.9 mm	CMOS	.5 mA		Other Microprocessor ICs	1.27 mm	R-PDSO-G8	1	Not Qualified	e3
LTC4263IDE#TR	Analog Devices	MICROPROCESSOR CIRCUIT	INDUSTRIAL	NO LEAD	14	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V		SMALL OUTLINE, VERY THIN PROFILE		4.5 V	85 Cel	-40 Cel	TIN LEAD	DUAL	.8 mm	3 mm			4 mm	CMOS		5 V		.5 mm	R-PDSO-N14	1	Not Qualified	e0
MXD1210ESA+	Analog Devices	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V		SMALL OUTLINE		4.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm	3.9 mm	30	260	4.9 mm	CMOS	.5 mA	5 V		1.27 mm	R-PDSO-G8	1	Not Qualified	e3
DS8024-RJX+	Analog Devices	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	3.3,5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	4.4 mm	30	260	9.7 mm	CMOS	215 mA	3.3 V	Other Microprocessor ICs	.65 mm	R-PDSO-G28	1	Not Qualified	e3
DS8024-RJX+T&R	Analog Devices	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	4.4 mm	30	260	9.7 mm	CMOS		3.3 V		.65 mm	R-PDSO-G28	1		e3
DS8024M-RJX+T	Analog Devices	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	4.4 mm	30	260	9.7 mm	CMOS		3.3 V		.65 mm	R-PDSO-G28	1		e3
DS28S60Q+	Analog Devices	CRYPTOGRAPHIC AUTHENTICATOR	INDUSTRIAL	NO LEAD	12	HVSON	SQUARE	UNSPECIFIED	YES	3.63 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC12,.12,20	1.62 V	105 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	.8 mm	3 mm	30	260	3 mm	CMOS		3.3 V		.5 mm	S-XDSO-N12	1		e3
DS28E39Q+T	Analog Devices	CRYPTOGRAPHIC AUTHENTICATOR	INDUSTRIAL	NO LEAD	6	HVSON	SQUARE	UNSPECIFIED	YES	3.63 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC6,.12,38	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	.8 mm	3 mm	30	260	3 mm	CMOS		3.3 V		.95 mm	S-XDSO-N6	1		e3
MXD1210ESA+T	Analog Devices	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V		SMALL OUTLINE		4.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm	3.9 mm	30	260	4.9 mm	CMOS	.5 mA	5 V		1.27 mm	R-PDSO-G8	1	Not Qualified	e3
MXD1210EPA+	Analog Devices	MICROPROCESSOR CIRCUIT	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V		IN-LINE		4.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	4.572 mm	7.62 mm	30	260	9.375 mm	CMOS	.5 mA	5 V		2.54 mm	R-PDIP-T8	1	Not Qualified	e3
CAT93C8614JI-25TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.75 mm	3.9 mm			4.9 mm	CMOS		5 V		1.27 mm	R-PDSO-G8		Not Qualified	e0
CAT93C5631PI-42	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	6 V		IN-LINE		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	4.57 mm	7.62 mm			9.27 mm	CMOS		5 V		2.54 mm	R-PDIP-T8		Not Qualified	e0
CAT93C8631SI-28TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.75 mm	3.9 mm			4.9 mm	CMOS		5 V		1.27 mm	R-PDSO-G8		Not Qualified	e0
CAT93C5722JA-45TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE		2.7 V	105 Cel	-40 Cel	TIN LEAD	DUAL	1.75 mm	3.9 mm			4.9 mm	CMOS		5 V		1.27 mm	R-PDSO-G8		Not Qualified	e0
CAT93C5612UI-45TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm	3 mm			3 mm	CMOS		5 V		.65 mm	R-PDSO-G8	1	Not Qualified	e0
CAT93C6613SI-45TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.75 mm	3.9 mm			4.9 mm	CMOS		5 V		1.27 mm	R-PDSO-G8		Not Qualified	e0
CAT93C6632SI-42TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.75 mm	3.9 mm			4.9 mm	CMOS		5 V		1.27 mm	R-PDSO-G8		Not Qualified	e0
CAT93C8634UI-45TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm	3 mm			3 mm	CMOS		5 V		.65 mm	R-PDSO-G8	1	Not Qualified	e0
CAT93C5732JA-28TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE		2.7 V	105 Cel	-40 Cel	TIN LEAD	DUAL	1.75 mm	3.9 mm			4.9 mm	CMOS		5 V		1.27 mm	R-PDSO-G8		Not Qualified	e0
CAT93C6613UA-25TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.7 V	105 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm	3 mm			3 mm	CMOS		5 V		.65 mm	R-PDSO-G8	1	Not Qualified	e0
CAT93C5623SA-25TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE		2.7 V	105 Cel	-40 Cel	TIN LEAD	DUAL	1.75 mm	3.9 mm			4.9 mm	CMOS		5 V		1.27 mm	R-PDSO-G8		Not Qualified	e0
CAT93C8613KI-25TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	2.03 mm	5.25 mm			5.3 mm	CMOS		5 V		1.27 mm	R-PDSO-G8		Not Qualified	e0
CAT93C5732KI-45TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	2.03 mm	5.25 mm			5.3 mm	CMOS		5 V		1.27 mm	R-PDSO-G8		Not Qualified	e0
CAT93C5631KA-42TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE		2.7 V	105 Cel	-40 Cel	TIN LEAD	DUAL	2.03 mm	5.25 mm			5.3 mm	CMOS		5 V		1.27 mm	R-PDSO-G8		Not Qualified	e0
CAT93C6631JI-28TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.75 mm	3.9 mm			4.9 mm	CMOS		5 V		1.27 mm	R-PDSO-G8		Not Qualified	e0
CAT93C8624UI-45TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm	3 mm			3 mm	CMOS		5 V		.65 mm	R-PDSO-G8	1	Not Qualified	e0
CAT93C5723KI-28TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	2.03 mm	5.25 mm			5.3 mm	CMOS		5 V		1.27 mm	R-PDSO-G8		Not Qualified	e0
CAT93C5624KI-28TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	2.03 mm	5.25 mm			5.3 mm	CMOS		5 V		1.27 mm	R-PDSO-G8		Not Qualified	e0
CAT93C6623SI-28TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.75 mm	3.9 mm			4.9 mm	CMOS		5 V		1.27 mm	R-PDSO-G8		Not Qualified	e0
CAT93C8613KI-28TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	2.03 mm	5.25 mm			5.3 mm	CMOS		5 V		1.27 mm	R-PDSO-G8		Not Qualified	e0
CAT93C5711KI-28TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	2.03 mm	5.25 mm			5.3 mm	CMOS		5 V		1.27 mm	R-PDSO-G8		Not Qualified	e0
CAT93C5723SA-25TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE		2.7 V	105 Cel	-40 Cel	TIN LEAD	DUAL	1.75 mm	3.9 mm			4.9 mm	CMOS		5 V		1.27 mm	R-PDSO-G8		Not Qualified	e0
CAT93C5723SA-28TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE		2.7 V	105 Cel	-40 Cel	TIN LEAD	DUAL	1.75 mm	3.9 mm			4.9 mm	CMOS		5 V		1.27 mm	R-PDSO-G8		Not Qualified	e0
CAT93C5732UI-25TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm	3 mm			3 mm	CMOS		5 V		.65 mm	R-PDSO-G8	1	Not Qualified	e0
CAT93C5734JI-45TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.75 mm	3.9 mm			4.9 mm	CMOS		5 V		1.27 mm	R-PDSO-G8		Not Qualified	e0
CAT93C5633UI-45TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm	3 mm			3 mm	CMOS		5 V		.65 mm	R-PDSO-G8	1	Not Qualified	e0
CAT93C6613UA-42TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.7 V	105 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm	3 mm			3 mm	CMOS		5 V		.65 mm	R-PDSO-G8	1	Not Qualified	e0
CAT93C6614JI-25TE13	Onsemi	MICROPROCESSOR CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		SMALL OUTLINE		2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.75 mm	3.9 mm			4.9 mm	CMOS		5 V		1.27 mm	R-PDSO-G8		Not Qualified	e0

Other Function uPs,uCs & Peripheral ICs

Other function uPs, uCs, and peripheral ICs refer to a wide range of integrated circuits that perform a variety of functions beyond the traditional microprocessor and microcontroller roles. These ICs can be found in a variety of electronic devices, including computers, smartphones, automotive systems, and industrial control systems.

Examples of other function ICs include data acquisition and conversion ICs, which are used to convert analog signals into digital data that can be processed by a microcontroller or microprocessor. These ICs are commonly used in industrial control systems and medical equipment, among other applications.

Another example is interface and communication ICs, which facilitate communication between different electronic devices. These ICs can include Ethernet controllers, USB controllers, and serial communication interfaces, among others.

Power management ICs are another important category of other function ICs. These ICs are used to regulate and manage the power supply to electronic devices, ensuring that they operate efficiently and safely. Power management ICs can include voltage regulators, power controllers, and battery management ICs.